PP-g-(MAH/St)和PP-g-MAH对聚丙烯/木粉复合材料性能的影响

在转矩流变仪中用熔融接枝法制备马来酸酐(MAH)和苯乙烯(St)接枝聚丙烯（PP）-PP-g-(MAH/St)和PP-g-MAH,将其作为聚丙烯/木粉复合材料的相容剂。 FTIR证实MAH和St单体与PP发生接枝反应。 用SEM和DSC等手段考察两种相容剂对PP/木粉复合材料微观形貌和结晶性能的影响,探索了各种PP/木粉复合材料加工和力学性能不同的内在原因。 SEM显示,PP-g-(MAH/St)改性木粉比PP-g-MAH改性木粉在PP基体中分散性更佳,木粉与PP的界面更加模糊,相容性进一步改善。 DSC结果表明,PP-g-(MAH/St)改性体系可增强木粉对PP的异相成核作用,提高结晶温度和结晶度。 复合材料的加工和力学性能测试结果表明,PP-g-(MAH/St)改性效果明显优于PP-g-MAH。 复合材料的熔体质量流动速率随相容剂用量的增加而逐步下降,PP-g-(MAH/St)改性体系拉伸强度和弯曲强度却逐步上升,并在相容剂用量为4.8 g/100 g PP时达到极值。 此时其拉伸强度达40.62 MPa,分别是未改性体系和PP-g-MAH改性体系的1.29和1.17倍;其弯曲强度达45.72 MPa,分别是未改性体系和PP-g-MAH改性体系的1.23和1.59倍;而无缺口冲击强度却在相容剂用量为3.6 g/100 g PP时达到极值13.35 kJ/m2,分别是未改性体系和PP-g-MAH改性体系的1.62倍和1.42倍。     

不同改性剂对聚丙烯/碳酸钙复合材料性能的影响

以马来酸酐(MAH)、聚丙烯蜡(PPW)为主要原料,采用原位固相接枝改性法制得PP/CaCO3-MAH-PPW复合材料,并与添加相容剂聚丙烯接枝马来酸酐(PP-g-MAH)所制得的PP/PP-g-MAH/CaCO3复合材料进行比较。结果表明,CaCO3良好的分散性及其与PP基体适宜的界面粘接是复合材料具有较好韧性的关键因素。与PP/PP-g-MAH/CaCO3复合材料相比,PP/CaCO3-MAH-PPW复合材料表现出更佳的冲击、弯曲和加工性能,当m(PP)∶m(CaCO3)=100∶20时,材料缺口冲击强度达到最大值,是基体树脂的1.19倍。     

可生物降解聚碳酸亚丙酯(PPC)/相容剂/聚丙烯(PP)纺粘非织造布切片性能研究

采用熔融共混法制备可生物降解聚碳酸亚丙酯(PPC)/相容剂/聚丙烯(PP)纺粘非织造布切片,分别研究相容剂马来酸酐(MAH)、马来酸酐接枝聚丙烯(PP-2)、马来酸酐-苯乙烯接枝聚丙烯(PP-g-(MAH-coSt))对切片性能的影响.当mPPC∶mPP为70∶30时,相容剂MAH、PP-2、PP-g-(MAH-co-St)的最优用量分别为PPC和PP总质量的1%、3%、8%,在最优用量下PPC/相容剂/PP纺粘非织造布切片的拉伸强度分别为20.16、21.27、26.34 MPa,熔体流动速率(MFR)分别为81.6 g/10min、103.6 g/10min、46.4 g/10min,T-5%较不添加相容剂时提高了50.5、10.0、28.0 K,扫描电镜图显示加了相容剂的切片内部结构紧密,相容性较好,30天降解率在3.12%以上.红外和核磁谱图表明相容剂PP-g-(MAH-co-St)的作用机理是其酸酐基团和PPC发生了开环反应,通过化学键作用促进PPC与PP相容.相容剂改善了切片的力学性能、热学性能和降解性能,提高了切片的界面粘附力和相容性,在满足纺粘生产工艺下,切片的综合性能和加工温度范围得到提高,为制备具有良好综合性能的可生物降解纺粘非织造布切片提供了理论数据.     

官能团化聚丙烯对Mg(OH)2/PP结晶与熔融行为的影响

制备了官能团化聚丙烯改性Mg(OH)2/PP复合材料，并用DSC研究了改性PP，Mg(OH)2/PP和改性Mg/(OH)2/PP中PP的结晶与熔融行为，官能团化PP（FPP），丙烯酸（AA）和Mg(OH)2都能提高PP的结晶温度，归结于异相成核作用，AA和FPP加入进一步使Mg(OH)/PP中PP结晶温度提高，但AA用量增加对PP结晶温度无影响。     

聚丙烯/插层改性水滑石纳米复合材料结构与性能研究

采用离子交换法制备了十二烷基磺酸钠和衣康酸共同改性水滑石(LDHs2),FTIR、XRD分析表明,十二烷基磺酸钠和衣康酸能够同时进入水滑石片层之间,层间距有很大提高。利用改性水滑石,通过马来酸酐-苯乙烯共接枝改性聚丙烯相容剂的熔融共混和聚丙烯与水滑石溶液共混制备母粒,然后与聚丙烯分别熔融共混两种方法制备聚丙烯/水滑石纳米复合材料。TEM分析表明,马来酸酐-苯乙烯共接枝改性聚丙烯作相容剂可以使水滑石在聚丙烯基体中达到更好分散。DSC、XRD分析表明,水滑石、相容剂以及短链共聚聚丙烯对聚丙烯晶型没有影响,但对其结晶速率、结晶度以及晶粒大小有所改变,复合材料中聚丙烯的起始结晶温度、结晶峰温度、结晶速率、结晶度均比纯聚丙烯高,晶粒粒径分布也更均匀。     

PP-g-MAH对聚丙烯/滑石粉复合材料的性能影响

研究了两种马来酸酐接枝聚丙烯（PP-g-MAH）在不同含量时对聚丙烯（PP）/滑石粉复合材料的力学性能、雾化性能和线性膨胀系数的影响.结果表明,接枝物的加入能提高复合材料的拉伸性能、冲击性能和弯曲性能,但随着含量的增加拉伸强度、冲击强度和弯曲强度及弯曲模量有所降低.在含量相同时,接枝物1对冷凝组份的影响更小.复合材料的线性膨胀系数随接枝物含量的增加先减小后增加.     

原位固相接枝改性碳酸钙/聚丙烯复合材料的制备

用马来酸酐（MAH）在碳酸钙（CaCO3）表面引入双键,通过原位固相接枝法将聚丙烯蜡（PPW）化学键合在CaCO3表面,制得3种接枝率的CaCO3-MAH-PPW。 将这3种改性CaCO3填充聚丙烯（PP）制备复合材料,研究了PP/CaCO3界面作用对复合材料强度的影响。 结果表明,CaCO3表面经PPW接枝改性后在PP中的分散性提高,与PP相容性变好;随着改性CaCO3表面PPW接枝率的提高,CaCO3与PP之间界面作用逐渐增强。 当PPW接枝率为4.48 mg PPW/g CaCO3时,CaCO3与PP之间的界面作用最强,复合材料拉伸强度下降最小,杨氏模量提升最大,当m(PP)∶m(CaCO3)=100∶50时,杨氏模量达0.86 GPa,是纯PP的1.63倍;而PPW化学接枝率为2.49 mg PPW/g CaCO3时,CaCO3与PP之间的界面作用适中,复合材料缺口冲击强度提升最大,且当m(PP)∶m(CaCO3)=100∶10时,缺口冲击强度达3.91 kJ/m2,是纯PP的1.35倍。     

可膨胀石墨阻燃体系在聚丙烯中的作用

采用可膨胀石墨(EG)为主阻燃剂,包裹红磷(MRP)为阻燃协效剂制备阻燃聚丙烯(PP)。在mEG∶mMRP≥2时,阻燃效果最佳。阻燃剂(FR)含量达到30%后,阻燃效果大幅度提高,氧指数大于28。采用热失重和流变学方法分析了炭层质量,探讨了在mEG∶mMRP≥2时,阻燃效率最高的原因。相容剂马来酸酐接枝聚丙烯(PP-g-MAH)能够改善阻燃剂和聚丙烯之间的相容性,提高粘结力,改善炭层质量,提高材料的氧指数,PP-g-MAH用量为30%时,材料的氧指数达到31.4。     

超支化聚乙烯亚胺接枝二氧化硅的制备及在聚丙烯改性中的应用

首先利用3-缩水甘油氧基丙基三甲氧基硅烷(简称GPS)作为偶联剂,对纳米SiO2进行表面改性,获得表面含有环氧基的SiO2纳米粒子(SiO2-GPS).利用这些环氧基与超支化聚乙烯亚胺(HPEI)分子中的氨基进行反应,得到SiO2接枝超支化聚乙烯亚胺的纳米粒子(SiO2-GPS-g-HPEI).然后利用SiO2-GPS-g-HPEI与聚丙烯(PP)和PP接枝的马来酸酐(PP-g-MAH)共混、模压,制备PP/SiO2-GPS-g-HPEI/PP-g-MAH复合材料.红外光谱测试和热失重分析(TGA)测试结果表明,SiO2纳米粒子表面依次接枝了GPS和HPEI;扫描电子显微镜(SEM)的测试结果显示,SiO2-GPS-g-HPEI在聚丙烯基体中分散良好,其材料的冲击断裂为韧性断裂;复合材料共混时,扭矩的增加证明了共混物中分散相(SiO2-GPS-g-HPEI)与基体(PP/PP-g-MAH)界面之间存在一定的相互作用.少量SiO2-GPS-g-HPEI加入PP/PP-g-MAH中,冲击强度可增加96.3%,拉伸强度也有较大的提高.     

POE-g-PMAH反应性增容PA1010/PP共混物的性能研究

乙烯-辛烯共聚物-g-聚马来酸酐(POE-g-PMAH)作为反应性增容剂,采用熔体共混的方法制备了PA1010/PP共混物,通过扫描电镜(SEM)、力学性能、傅立叶变换红外光谱(FTIR)和示差扫描量热(DSC)测试,研究了POE-g-PMAH对PA1010/PP共混物的增容作用.结果表明,POE-g-PMAH的加入可以减小共混物的相区尺寸,当PA1010/PP/POE-g-PMAH=70/30/15时,分散相尺寸小而均匀;FTIR结果表明接枝在POE上的马来酸酐基团和PA1010在熔融共混期间发生了化学反应;DSC研究结果表明共混体系中PA1010和PP的结晶温度和结晶度随POE-g-PMAH的加入而降低,表明POE-g-PMAH的增容作用对PA1010和PP的结晶有抑制作用.力学性能测试结果表明随着POE-g-PMAH的增加,共混物的冲击强度逐渐增加,当POE-g-PMAH含量增加到15%时,干态冲击强度达到21.13 kJ/m2,是不加增容剂的3.1倍,而拉伸和弯曲强度可以保持较高水平.POE-g-PMAH的增容机理在于其支链中的马来酸酐能与PA1010中的胺基(NH2—)发生化学反应,而主链POE与PP有较好的亲和性,从而降低界面张力,减少相区尺寸,大幅度提高力学性能.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.