Stereoselective synthesis of vinylgermanes and their facile transformation into vinyl halides

Whereas iododegermylation of (Z)-1-triethylgermyl-1-dodecene gives (Z)-1-iodo-1-dodecene, bromodegermylation proves to give (E)-1-bromo-1-dodecene. Two general procedures for the preparation of vinylgermanes are also described.     

A facile access to N-sulfonylimidates and their synthetic utility for the transformation to amidines and amides

[reaction: see text] It is shown that N-sulfonylimidates can be efficiently prepared by a three-component coupling of terminal alkynes, sulfonyl azides, and alcohols with use of a copper catalyst and an amine base. The reaction is characterized by mild conditions, high selectivity, and tolerance with various functional groups. Facile transformation of imidates to amidines was also achieved by sodium cyanide. Additionally, a protocol for the extremely efficient Pd-catalyzed [3,3]-sigmatropic rearrangement of allylic sulfonimidates to N-allylic sulfonamides has been developed.     

Oligomeric benzylsulfonium salts: facile benzylation via high-load ROMP reagents

The development of high-load, oligomeric benzylsulfonium salts, generated via ring-opening metathesis polymerization, and their utility in facile benzylations of various nucleophiles is reported. These oligomeric sulfonium salts exist as free-flowing powders and are stable at room temperature. After the benzylation event, purification is attained via simple dry load/filtration, followed by solvent removal to deliver products in excellent yield and purity.     

A facile and novel route to unprecedented manganese C4 cumulenic complexes

The theoretically characterized (DFT) C4 cumulenic species Mn(C5H4R)(dmpe) [=C=C=C=C(SnPh3)2] was obtained by photolysis of the C(sp2)-Sn bond in the vinylidene complex Mn(C5H4R)(dmpe)[=C=C(SnPh3)-C[triple bond]CSnPh3], which in turn was prepared by a thermal reaction from MnC5H4R(dmpe)(C7H8) and Ph3Sn-C4-SnPh3.     

Cobalt and manganese complexes with redox-active ligands in polymerization of acrylonitrile and methyl methacrylate

The influence of bis[4,6-di-tert-butyl-N-(2,6-dimethylphenyl)-o-iminobenzosemiquinonato]cobalt(ii) and 4,6-di-tert-butyl-N-(2,6-diisopropylphenyl)-o-iminobenzosemiquinonato]-[4,6-di-tert-butyl-N-(2,6-diisopropylphenyl)-o-amidophenolate]manganese(iii) on polymerization of methyl methacrylate and acrylonitrile in the presence of azobisisobutyronitrile (as a traditional radical initiator) and alkyl halides (used for initiation of controlled atom transfer radical polymerization process) was studied. The effect of the nature of the activating agents (amines) and the temperature conditions on the overall polymerization rate of the indicated monomers, as well as molecular weight characteristics of the synthesized polymers, were analyzed. The optimal conditions for the synthesis of polyacrylonitrile and poly(methyl methacrylate) with a relatively narrow molecular weight distribution were selected.     

Cobalt on carbon nanofiber catalysts: auspicious system for study of manganese promotion in Fischer-Tropsch catalysis

STEM-EELS and XPS investigation shows manganese oxide to be closely associated with cobalt nanoparticles supported on carbon nanofibers thereby improving selectivity in Fischer-Tropsch catalysis.     

Porous magnetic manganese oxide nanostructures: synthesis and their application in water treatment

Magnetic manganese oxide nanostructures are fabricated at room temperature by mixing a KMnO(4) solution and oleic acid capped Fe(3)O(4) particles. Oleic acid molecules capped Fe(3)O(4) particles are oxidized by potassium permanganate (KMnO(4)) in an aqueous solution to produce porous magnetic manganese oxide nanostructures. The synthesis technique can be extended to other MnO(x) structures with composition of different nanocrystals, such as quantum dots, noble metal crystals which may have important applications as catalysts, adsorbents, electrodes and advanced materials in many scientific disciplines. Transmission electron microscopy, energy-dispersive X-ray spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, X-ray powder diffraction, Fourier transform infrared spectroscopy, and nitrogen adsorption-desorption measurements are employed to characterize the structures. As an adsorbent in water treatment, the nanostructures possess a large adsorption capability and high organic pollutant removal rates due to the large surface area and pore volume. The nanostructures are recyclable as their adsorption capability can be recovered by combustion. Furthermore, the strong magnetism exhibited by the structures provides an easy and efficient separation means in wastewater treatment under an external magnetic field.     

Thermo-mechanical properties of snake-like NiTi wires and their use in miniature devices

In this study, we present the thermo-mechanical characterization of snake-like shape memory alloy (SMA) NiTi wires. Several samples were formed at different thermal treatments and analyzed through calorimetry and thermo-mechanical tests. It was found that for small deformations the snake-like SMA wire behaves as a quasi-elastic material, presenting the flag-shape pseudoelastic behavior at high thermal treatment temperatures. The mechanical performance seems to depend basically on the snake geometry instead on the thermal treatment; only for the 773?K treatment sample the performance rapidly gets worse. Stabilization is reached in few cycles. After the thermo-mechanical characterization, we studied the performance of the snake-like SMA wire mounted in a miniature rotational actuator, suggesting an innovative application in the actuator field.     

Photodecomposition of selenosulfonates and their facile photoaddition to alkenes 1

Phenyl areneselenosulfonates ($\text{1}$) are very photosensitive and easily undergo photodecomposition via initial homolysis of the SeS bond. In the presence alkenes this facile photodissociation of $\text{1}$ can be used to initiate a free radical chain reaction (eq 6) that leads to addition of $\text{1}$ to the alkene to form β-phenylselenosulfones ($\text{2}$). The photoaddition requires much shorter reaction times than the non-photolytic addition of $\text{1}$ to alkenes described recently.²     

A facile and efficient synthesis of aryltriethoxysilanes via sonochemical Barbier-type reaction

A series of aryltriethoxysilanes was synthesized from the reaction mixture of aryl bromide, Mg powder, 1,2-dibromoethane and tetraethyl orthosilicate in THF under ultrasound. This sonochemical Barbier-type reaction provides a simple and efficient method for preparation of aryltriethoxysilanes. The Hiyama cross-coupling reaction of phenyltriethoxysilane with bromobenzene was investigated under different palladium catalysts and Pd(PhCN)₂Cl₂ was found to be the best choice.     

Remarkably facile solvolyses of triflates via carbocationic processes in dimethyl sulfoxide

A number of triflates have been shown to undergo clean pseudo-first-order solvolysis reactions in DMSO-d(6) to give products derived from carbocationic intermediates. Thus, t-BuCH(OTf)CO-t-Bu (5) and t-BuCH(2)OTf (9) react readily in DMSO-d(6) at 25 degrees C to give a rearranged oxosulfonium salts, and subsequent alkene products where methyl migration to the incipient cationic center occurs. t-BuCH(OTf)CO(2)CH(3) (14) gives analogous rearranged products, and 1-methylcyclopropyl triflate (21) gives a ring-opened allylic oxosulfonium salt. These triflates react primarily via k(Delta) pathways. 6-Methylbicyclo[3.1.0]hex-6-yl triflate (23), bicyclo[2.2.1hept-1-yl triflate (24), 1,6-methano[10]annulen-11-yl triflate (25), (CH(3))(2)C(OTf)CO(2)CH(3) (26), and (CH(3))(2)CCN(OTf) (29) all react in DMSO-d(6) to give carbocation-derived products. PhCH(OTf)CF(3) (33) and substituted analogues also react readily in DMSO-d(6), and the Hammett rho(+) value is -3.7. This suggests a "borderline" mechanism where the transition state has substantial charge development. The primary feature of these solvolyses is the high reactivity of all of these triflates in DMSO-d(6). Thus, these triflates are all more reactive in DMSO-d(6) than in HOAc, and for most, rates are faster than in CF(3)CH(2)OH. Triflates 5, 21, 29, and 33 are 10(8)-10(9) times more reactive in DMSO-d(6) than the corresponding mesylates. It is suggested that the decreased need for electrophilic solvation of triflate anion, and the high cation solvating ability of DMSO, are the reasons for the high triflate reactivity in DMSO-d(6).     

Physicochemical study of catalysts for the oxidative dehydrogenation of isobutane: Cobalt,nickel, and manganese molybdates

Temperature-programmed desorption and IR spectroscopic studies of the physicochemical properties of cobalt, nickel, and manganese molybdates are reported. These properties are correlated with the catalytic properties of the molybdates in the oxidative dehydrogenation of isobutane with atmospheric oxygen. It is demonstrated by an analysis of the IR spectra of the molybdates that the isobutene yield grows as the proportion of tetrahedrally coordinated molybdenum in the catalyst structure increases in isobutane dehydrogenation. NiMoO₄ has the highest surface concentration of strong acid sites, and it binds adsorbed isobutene more strongly than the other catalysts     

A facile approach toward multicomponent supramolecular structures: selective self-assembly via charge separation

A novel approach toward the construction of multicomponent two-dimensional (2-D) and three-dimensional (3-D) metallosupramolecules is reported. Simply by mixing carboxylate and pyridyl ligands with cis-Pt(PEt(3))(2)(OTf)(2) in a proper ratio, coordination-driven self-assembly occurs, allowing for the selective generation of discrete multicomponent structures via charge separation on the metal centers. Using this method, a variety of 2-D rectangles and 3-D prisms were prepared under mild conditions. Moreover, multicomponent self-assembly can also be achieved by supramolecule-to-supramolecule transformations. The products were characterized by (31)P and (1)H multinuclear NMR spectroscopy, electrospray ionization mass spectrometry, and pulsed-field-gradient spin echo NMR techniques together with computational simulations.     

微波法制备金属钴纳米晶棒及其表征

微波法制备金属钴纳米晶棒及其表征;微波法;钴;纳米晶棒;表面活性剂;表面修饰     

Oxidation of 1,2,3-butatrienes: A facile formation of methylenecyclopropanones and their subsequent photodecarbonylation

A peracid oxidation of some sterically hindered 1,2,3-butatrienes ( ) using an alkaline biphasic solvent system was examined, and the resulted methylenecyclopropanones ( ) were readily photodecarbonylated to give the corresponding allenes ( ) in good yields.     

Mononuclear and binuclear rhenium carbonyl nitrosyls: comparison with their manganese analogues

The structures and energetics of Re(NO)(CO)n (n = 5, 4, 3, 2) and Re2(NO)2(CO)n (n = 7, 6) have been investigated using density functional theory. For Re(NO)(CO)4 the preferred structure is an equatorially substituted trigonal bipyramid analogous to the known structure of the manganese analogue. The lowest energy structures for the unsaturated Re(NO)(CO)n (n = 3, 2) species can be derived from this structure by removal of carbonyl groups. A structure is found for Re(NO)(CO)5 in which the NO ligand has attached to one of the CO ligands by forming a C-N bond to give an unprecedented eta(2)-OCNO ligand. However, this structure is predicted to undergo exothermic CO loss to give Re(NO)(CO)4. The preferred structures for the binuclear derivatives Re2(NO)2(CO)n (n = 7, 6) are structures unprecedented for the manganese analogues and consist of a Re(CO)5 unit linked to a Re(NO)2(CO)(n-5) unit. However, only slightly higher in energy are structures of the type Re2(mu-NO)2(CO)n with two bridging nitrosyl groups, similar to the global minima for the manganese analogues. These results predict extensive areas of new rhenium carbonyl nitrosyl chemistry. Thus the synthesis of Re(NO)(CO)4 by methods related to the synthesis of the manganese analogue appears to be feasible. In addition, the existence of an extensive series of Re(NO)2(CO)2X derivatives, as well as a Re2(NO)4(CO)4 dimer, is predicted.     

Copper hydroxide nano and microcrystal: facile synthesis, shape evolution and their catalytic properties

In this paper, the morphology of copper hydroxide nano/microcrystals is finely controlled by adjusting the concentration of surfactant and NH(4)Cl as well as the reaction temperature, to provide plates, belts, wires, rods and urchin-like spheres, among others. A tree-type multiple head surfactant, bis (amidoethyl-carbamoylethyl) octadecylamine (C18N3), was used to prepare the copper hydroxide nano/microcrystals and it acted as a face-selective additive in the reaction system. The morphology of the Cu(OH)(2) microcrystals could be transformed from elliptical plates into truncated square plates as the NH(4)Cl concentration was increased. The results showed that the Cu(OH)(2) crystals were better than the amorphous type of Cu(OH)(2) in catalyzing the oxidation of resorcinol with H(2)O(2). Additionally, an investigation of the formation process of the nano/microcrystals was performed, which we believe is valuable for a precise understanding of the formation and fabrication of other metal hydroxides and metal oxides.     

A facile preparation of exo-cyclic conjugated dienes fused to lactams or lactones via intramolecular coupling of acetylenes and their behavior in Diels-Alder reactions

[reaction: see text] Treatment of bis-acetylenic amides or esters 3 with (eta(2)-propene)Ti(O-i-Pr)(2) generates functionalized titanacyclopentadienes which, upon hydrolytic workup, give exo, exo-cyclic conjugated dienes 4 in good yields. Some regio- and stereochemical aspects of their Diels-Alder reaction with dienophiles are also disclosed.