Accurate values of stability constant of Ca(2+)-murexide complex

In published reports, the values of stability constants of 1:1 complex of Ca(2+) and the dye ammonium purpurate (murexide) were not determined under controlled conditions and were not properly corrected for the binding of Ca(2+) with ions of buffer used to maintain pH and that of the background electrolyte used to maintain ionic strength. We report the molar absorptivities (epsilon) of murexide at pH 7.0, 7.5, 8.0, as well as the differential molar absorptivities (Deltaepsilon). Using these, we calculate the stability constants of the Ca-murexide complex at pH 5.0, 6.0, 6.5, 7.0, 7.5 and 8.0 at 15, 25 and 35 degrees C and 0.100 M ionic strength using KCl as background electrolyte. No buffer was used and the complication arising from buffer binding is thus avoided. These values are compared with those determined in the presence of buffers that bind metal ions negligibly (Tris at pH 7.5 and 8.0) or whose binding constant to Ca(2+) is reported and therefore can be corrected for (acetate at pH 5.0, Bistris at pH 6.5). Agreement is obtained within errors of measurement. The reported values are not true stability constants but can be used to calculate the concentration of free Ca(2+) ion in a metal-ligand mixture with high precision and accuracy. The effect of K(+) binding to murexide is considered and is found not to alter the calculated value of free calcium concentration in a mixture.     

Assessment of accuracy and precision in speciation analysis by competitive ligand equilibration-cathodic stripping voltammetry (CLE-CSV) and application to Antarctic samples

The analytical performances of Competitive Ligand Equilibration with Cathodic Stripping Voltammetric detection of the labile fraction (CLE-CSV) were assessed. This speciation method enables the concentration of natural ligand(s) and their conditional stability constants for the complexation of the investigated metal to be determined through thermodynamic considerations.Literature data were discussed and general trends in the precision of the determined parameters identified: ligand concentrations were affected, on average, by a 10% relative percentage standard deviation (RSD%), whereas conditional stability constants showed much lower precision, with an average RSD% of 50%.New experimental data were collected to obtain a complete assessment of accuracy and precision attainable for the determination of strong ligands at the ultra trace level, enabling the whole protocol to be evaluated. Firstly, the side reaction coefficient alpha for the formation of the complex between the added ligand and the investigated metal (α_CuL) was determined. The method was subsequently applied to the analysis of solution containing ligand at trace levels (5-50 nM) with known complexing characteristics. Copper was used as the model metal ion and ethylenediaminetetraacetic acid (EDTA) and diethylenetriaminepentaacetic acid (DTPA) as the model ligands. Results evidenced that the CLE-CSV protocol is not affected by systematic errors in the determination of both ligand concentration and the conditional stability constants. Good precision is obtained for ligand concentrations, with an average relative standard deviation (RSD%) of 5%; an average RSD% of 23% was calculated for the conditional stability constants. Including the contribution of the uncertainty in the value of α_CuL in the evaluation of the uncertainty in the latter parameter increased the RSD% up to 40%. The CLE-CSV protocol was subsequently applied to the detection of strong ligands in water samples collected in Antarctica: precision was shown to be comparable with literature data.     

Spectrophotometric Investigation and Determination of Scandium Using Semi-Xylenol Orange

Abstract

The composition, stability constant and molar absorption coefficient of the chelate of scandium ion with Semi-Xylenol Orange (SXO) are determined speotrophotometrically in a medium of chloroacetate buffer. In the scandium-Semi-Xylenol Orange system, Sc(SXO) chelate is formed with a logarithmic stability constant of 19.66 and molar absorptivity of 2.4x10⁴ (530 nm) 1 mole^?1cm^?1.

The precision and accuracy attainable in a direct photometric microtitration of Sc⁺⁺⁺ ion with a 0.001M solution of EDTA using SXO as a metallochromic indicator has been studied. Interferences of different anions and cations on scandium determination are also investigated.

Spectrophotometric determination of scandium(III) using SXO at the optimum conditions has been carried out. Beer's law is obeyed for 0–13.49 μg scandium/25 ml.     

Analytical application and spectrophotometric study of the scandium-indoferron complex

A new spectrophotometric method for microgram amounts of scandium with indoferron is described. The molar absorptivity is 960 l.mole⁻¹.mm⁻¹ at 600 nm. Uranium and the rare earths do not interfere, if present in amounts less than 50 μg. Scandium in silicate rocks can be determined by the procedure after separation of the scandium by a three-stage ion-exchange Chromatographic technique. The acid dissociation constants of indoferron and conditional formation constants of the 1:2 complex have been determined spectrophotometrically.     

Spectrophotometric determination of bismuth with semi-xylenol orange and its application in metal analysis

Semi-Xylenol Orange forms a 2 : 1 chelate with bismuth(III), which has a logarithmic value of 3.08 for its conditional formation constant and a molar absorptivity of 4.2 x 10(4) l.mole(-1).cm(-1). Beer's law is obeyed at 540 nm over the range 10-30 mug of Bi(III), with a standard deviation of 1.1 mug (n = 18). Lactic acid is used as an auxiliary complexing agent to prevent olation and oxolation. Interference from up to 1.3 mg of copper can be eliminated by the combined use of masking Cu(II) with thiourea, ascorbic acid and thiosemicarbazide and "post-masking" Bi(III) with sodium chloride. The proposed method has been successfully applied to the direct determination of 0.002% of Bi in lead metal, with a coefficient of variation varying from 3.7 to 6.9%.     

Spectral characterization of a novel near-infrared cyanine dye: a study of its complexation with metal ions

The spectral features of the near-infrared (NIR) dye TG-170 in different solutions and its complexation with several metal ions were investigated. The absorbance maxima of the dye are at λ=819, 805, and 791 nm in dimethyl sulfoxide (DMSO), methanol, and a buffer of pH 5.9, respectively. These values match the output of a commercially available laser diode (780 nm), thus making use of such a source practical for excitation. The emission wavelengths of the dye are at λ_em =822, 812, and 803 nm in DMSO, methanol, and the buffer, respectively. The molar absorptivity and fluorescence quantum yield increase accordingly. The addition of either an Al(III) ion or Be(II) ion resulted in fluorescence quenching of the dye. The Stern–Volmer quenching constant, K_SV, was calculated from the Stern–Volmer plot to be K_SV=3.11×10⁵ M⁻¹ for the Al(III) ion and K_SV=1.17×10⁶ M⁻¹ for the Be(II) ion. The molar ratio of the metal to the dye was established to be 1:1 for both metal ions. The stability constant, K_S, of the metal–dye complex was calculated to be 4.37×10⁴ M⁻¹ for the Al–dye complex and 1.94×10⁶ M⁻¹ for the Be–dye complex.     

La(Ⅲ)、Eu(Ⅲ)与HBED配合的紫外差光谱研究

在0.01mol·L     

Spectrophotometric and titrimetric determination of gallium in minerals and ores using semimethylthymol blue

The composition, overall stability constant and molar absorptivity of the chelate of gallium(III) ion with semimethylthymol blue, SMTB, were determined spectrophotometrically in acetate buffer (pH 4.5–5). A violet Ga(SMTB) chelate was formed with logarithmic overall stability constant of 18.0±0.1 (I=0.1) and molar absorptivity of 4.25×10⁴l mol^–1cm^–1 (_max 580 nm). SMTB is proposed as a new reagent for the spectrophotometric determination of micro-molar amounts of gallium(III). The colour development depends on time, temperature, pH and buffer species. The interference of different cations, anions and organic acids on gallium(III) determination was also investigated. Beer's law was obeyed for 3.5–31.3 gGa(III)/25ml (0.14–1.25 g ml^–1). SMTB was used for the spectrophotometric determination of gallium in different grade minerals and ores and the results were of acceptable error and relative standard deviation. Comparison between the two suggested methods and atomic absorption spectrometry for Ga(III) determination was carried out.     

Investigation of properties of rare earth complexes with dibromo- p -methyl-methylsulfonazo by spectral correction technique

The reactions were sensitive between seven rare earth (RE) metals Nd(III), La(III), Ce(III), Pr(III), Sm(III), Eu(III) and Gd(III) and dibromo-p-methylmethylsulfonazo (DBMMSA) in acidic solution. The spectral correction method has been applied in the determination of properties of RE complexes instead of ordinary spectrophotometry. Composition ratios, real molar absorptivities (ε) and stepwise stability constants (K) of each of the RE complexes were determined easily because the method eliminated the absorption influence of excess of ligand on complex. Results showed that the cumulativeK values of the complexes were between 3.91 × 10¹⁴ and 2.34 × 10²⁸ and the real (not apparent) absorptivity between 8.85 × 10⁴ and 2.12 × 10⁵ l mol^-1cm^-1 at 640 nm.     

Use of ion exchange for the determination of stability constants of metal-humic substance complexes

Humic substances (HSs) occur throughout the ecosphere in soils, waters and underground systems. The strong complexation of HSs is of importance in the migration of radionuclies in geological media. Renewed interest in stability constants of complexes of radioelements and radionuclides with humic and fulvic acids has been generated by problems associated with the nuclide migration in the environment. Use of the ion exchange method for the determination of conditional stability constants of metal-HS complexes was examined and reviewed. The complexation of HS to metal ions cannot be described in rigorous mathematical terms because of the ill-defined nature of HSs in contrast with the complexation of single ligands. Furthermore, the advantages and disadvantages of Schubert's and, Ardakani-Stevenson's, curve fitting methods were discussed. The great stabilities of HS complexes to rare earths (Yb(III), Tb(III), Eu(III), Gd(III)), americium(III), cobalt(II), uranyl(VI) and thorium(IV) were revealed.     

Spectrophotometric determination of chromium(III, VI) by use of chromium(III, VI)-Chrome AzurolS-cetylpyridinium bromide-hydroxylamine hydrochloride-zinc(II) system

This paper shows that the sensitivity of the Cr(III, VI)—Chrome Azurol S (CAS)-cetylpyridinium bromide (CPB)—hydroxylamine hydrochloride system can be increased and the wavelength of maximum absorption slightly shifted by addition of zinc(II) and that the analytical data are practically identical for both Cr(III) and Cr(VI), indicating that under the conditions used both initial oxidation states of chromium yield the same final oxidation state, Cr(III). On the basis of the Cr(III, VI)—CAS—CPB—NH₂OH·HCl—Zn systems a new, highly sensitive and selective method for spectrophotometric determination of microamounts of Cr(III, VI) has been developed, with molar absorptivity of 1.27 × 10⁵ 1. mole⁻¹ . cm⁻¹ for the complex at 620 nm and linear calibration up to 0.4 μg/ml chromium. Various foreign ions do not interfere. The method can be applied to direct determination of chromium in steels.     

Extraction and sensitive spectrophotometric determination of ytterbium with 2-(3,5-dichloro-2-pyridylazo)-5-dimethylaminophenol

The operating conditions for the absorptiometric determination of Yb(III) with the reagent 2-(3,5-dichloro-2-pyridylazo)-5-dimethylaminophenol (3,5-diClDMPAP) by a liquid—liquid extraction technique are presented. The complex yields a molar absorptivity of 1.54 × 10⁵l.mole⁻¹.cm⁻¹ (λ_max = 588 nm) and an optimum concentration range of 0.025–1.360n mg/l., at pH = 10. The method developed has been applied to the determination of Yb(III) in synthetic and concrete mixtures.     

Solvent extraction of the indium-alizarin Red S chelate as its 1,3-diphenylgaunidium salt

The extraction of the 1,3-diphenylguanidiuin (DPG) salt of the indium-Alizarin Red S (ARS) chelate with n-butyl acetate has been investigated. The extracted species has an absorption maximum at 525 nm, and Beer's law is obeyed over the range from 0.3 to 2.8 ppm of indium. The molar absorptivity is 2.65 x 10(3) l.mole(-1).mm(-1) at 525 nm. The 1:3 indium(III)-ARS chelate is extracted from aqueous solution in a 1:3 molar ratio with DPG. The infrared spectrum implies that the metal ion is probably chelated by the two phenolic oxygen atoms of ARS.     

Determination of nickel in biological samples spectrophotometrically involving complexation reaction with some thiazolylazo compounds

Three new heterocyclic azo compounds, 5(2-benzothiazolylazo)2,2 biphenyldiol (I), 5-(2-benzothiazolylazo)-8-hydroxyquinolene (II) and 4-(2-benzothiazo-lylazo)3-hydroxy-2-naphthoic acid (III) were synthesized. The formation constant of the reagents in 30% (v/v) ethanol and reactions with various metal ions were studied. These reagents (I-III) reacts with nickel ion to form (2:1) colored complex with an absorption band at 604, 635 and 643 nm. The apparent stability constants and the optimum conditions for complete color development were investigated. Beer's law is obeyed over the concentration ranges of 0.05-3.50, 0.05-4.00 and 0.05-3.10 micrograms ml-1. For more accurate analyses, Ringbom optimum concentration ranges were found to be 0.20-3.25, 0.20-3.80 and 0.20-2.90 micrograms ml-1 using reagents I, II and III, respectively. The apparent molar absorptivity and Sandell sensitivity were also calculated. The interference of various foreign ions on the determination of nickel was investigated. The proposed method has been successfully applied to the determination of nickel substrates in various biological samples.     

Photometric determination of selenium with ferrocene

A sensitive spectrophotometric method for the determination of selenium has been developed. The method depends on a redox reaction between selenious acid in 8M hydrochloric acid and a chloroform solution of ferrocene. One mole of selenious acid produces 4 moles of ferricenium ions, which are then oxidized by bromine water. The resulting iron(III) is reduced to iron(II) and determined with 1,10-phenanthroline. The relative standard deviation for 20 mug of selenium was 1.1%. The apparent molar absorptivity of the final solution, referred to selenious acid, is 4.23 x 10(4) 1. mole(-1). cm(-1) at 512 nm. This method has been used to determine selenium in copper metal.     

A Comparative Study on Spectrophotometric,Conductometric and Potentiometric Determination of Ascorbic Acid

Abstract

A comparison has been made on the selectivity, accuracy and precision of spectrophotometric, conductometric and potentiometric methods for the determination of ascorbic acid in water which is based on the reduction of gold(III) ion by ascorbic acid. Gold(III) ion forms a complex with gelatin in alkaline medium which on reduction with ascorbic acid produces coloured gold sol. The sol shows an absorption maximum at 540 nm with molar absorptivity of 2.3×10^?3litre mol^?1 cm^?1 and the Sandell's sensitivity of 7.6 × 10^?2 μgcm^?2. The relative standard deviation is 0.22% and the confidence limit (20 determinations, 95%) is 2.0 ± 0.009%. To examine the extent of sensitivity of the spectrophotometric method the proposed method is compared with the sensitivities of the conductometric and potentiometric methods.     

Spectrophotometric Study of the Complexation of Some Lanthanide (III) Ions with a Series of 18-Crowns-6 in DMSO Solution Using Murexide as a Metallochromic Indicator

The complexation of La(III), Ce(III), Pr(III) and Er(III) with 18-crown-6(18C6), dibenzo-18-crown-6 (DB18C6), dicyclohexano-18-crown-6 (DCY18C6) anddibenzopyridino-18-crown-6 (DBPY18C6) has been studied in dimethylsulfoxide(DMSO) by means of a competitive spectrophotometric method using murexide asa metal ion indicator. The formation constants of the 1 : 1 complexeswere found tovary in the order La(III) > Ce(III) > Pr(III) > Er(III). It was foundthat the structure influences the formation and stability of the resultingcomplexes. The effects ofvarious parameters on complexation are discussed. The order of the stabilityconstants of each lanthanide ion with these macrocycles are18C6 > DC18C6 > DB18C6 > DBPY18C6.     

Die Koordinationstendenz des Murexid-Ions

The stability constants of the murexide complexes with various metal ions were determined spectrophotometrically. The coordination tendencies of the tridentate ligands iminodiacetate, dipicolinate and murexide are compared. In terms of basicity and charge, the murexide complexes exhibit a stability which is remarkably high and most of all pronounced with A-metal ions. The possible reason for this fact is discussed.     

Spectroscopic investigation on europium complexation with humic acid and its model compounds

Time resolved fluorescence spectroscopy (TRFS) of Eu(III) (an analogue of trivalent actinides) complexation with humic acid (HA) and its model compounds, namely phthalic acid (PA), mandelic acid (MA) and succinic acid (SA) has been carried out at varying concentration ratios of ligand to metal ion. The emission spectra were recorded in the range of 550–650 nm by exciting at an appropriate wavelength. The intensity of the 616 nm peak of Eu(III) was found to be sensitive to complexation. The ratio of the intensities of 616 and 592 nm peaks was used to determine the stability constants of Eu-phthalate, Eu-mandelate and Eu-succinate complexes. In the case of model compounds, the life-time was found to increase with increasing ligand to metal ratio (L/M) indicating the decrease in quenching of the fluorescence by coordinated water molecules with increasing complexation. On the other hand in the case of HA, the life-time was found to be constant at least up to L/M of 5, indicating the formation of outer sphere complex. Beyond L/M = 5 the life-time value was found to increase which can be attributed to the binding of the metal ion to the higher affinity sites in the HA macromolecule.     

Spectrophotometric Determination of Iron(III) as Azide Complexes in Aqueous Tetrahydrofuran

Abstract

A simple, sensitive and alternative method for the spectrophotometric determination of iron(III) has been established. The procedure is based on the formation of iron-azide complexes in 60% (v/v) tetrahydrofuran/ water medium. The high sensitivity obtained in this method is due to the use of an interesting absorption band not previously reported in the literature. In the recommended conditions, absorbances for the ferric complexes are measured at 400 nm where the molar absorptivity is 1.52 × 10⁴ 1 mol^?1 cm^?1. The organic solvent used increases the sensitivity and the stability of the measurements. The precision is shown by the average deviation of about 0.3%. This system obeys Beer's law and is suitable for iron(III) determination in the concentration range from 0.6 to 3.2 mg 1^?1 (ppm). The best experimental conditions were determined studying the different factors involved. The influence of various diverse ions was also studied.