首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 968 毫秒
1.
Pulmonary surfactants stabilize the lung by way of reducing surface tension at the air-lung interface of the alveolus. 31P NMR, thin-layer chromatography, and electrospray ionization mass spectroscopy of bovine lipid extract surfactant (BLES) confirmed dipalmitoylphosphatidylcholine (DPPC) to be the major phospholipid species, with significant amounts of palmitoyl-oleoylphosphatidylcholine, palmitoyl-myristoylphosphatidylcholine, and palmitoyl-oleoylphosphatidylglycerol. BLES and DPPC spread at the air-water interface were studied through surface pressure area, fluorescence, and Brewster angle microscopy measurements. Langmuir-Blodgett films of monomolecular films, deposited on mica, were characterized by atomic force microscopy. BLES films displayed shape, size, and vertical height profiles distinct from those of DPPC alone. Calcium ions in the subphase altered BLES film domain structure. The addition of cholesterol (4 mol %) resulted in the destabilization of compressed BLES films at higher surface pressures (>40 mN m-1) and the formation of multilayered structures, apparently consisting of stacked monolayers. The studies suggested potential roles for individual surfactant lipid components in supramolecular arrangements, which could be the contributing factors in pulmonary surfactant to attain low surface tension at the air-water interface.  相似文献   

2.
The primary role of lung surfactant is to reduce surface tension at the air–liquid interface of alveoli during respiration. Axisymmetric drop shape analysis (ADSA) was used to study the effect of poly(ethylene glycol) (PEG) on the rate of surface film formation of a bovine lipid extract surfactant (BLES), a therapeutic lung surfactant preparation. PEG of molecular weights 3350; 8000; 10,000; 35,000; and 300,000 in combination with a BLES mixture of 0.5 mg/mL was studied. The adsorption rate of BLES alone at 0.5 mg/mL was much slower than that of a natural lung surfactant at the same concentration; more than 200 s are required to reach the equilibrium surface tension of 25 mJ/m2. PEG, while not surface active itself, enhances the adsorption of BLES to an extent depending on its concentration and molecular weight. These findings suggest that depletion attraction induced by higher molecular weight PEG (in the range of 8000 to 35,000) may be responsible for increasing the adsorption rate of BLES at low concentration. The results provide a basis for using PEG as an additive to BLES to reduce its required concentration in clinical treatment, thus reducing the cost for surfactant replacement therapy.  相似文献   

3.
In the lungs, oxygen transfer from the inspired air to the capillary blood needs to cross the surfactant lining layer of the alveoli. Therefore, the gas transfer characteristics of lung surfactant film are of fundamental physiological interest. However, previous in vitro studies-most relied on the Langmuir-type balance-fail to cover the low surface tension range (i.e., less than the equilibrium surface tension of approximately 25 mJ/m2) due to film leakage. We have recently developed a novel in vitro experimental strategy, the combination of axisymmetric drop shape analysis and captive bubble technique (ADSA-CB), in studying the effect of surfactant films on interfacial gas transfer (Langmuir 2005, 21, 5446). In the present work, ADSA-CB is used as a micro-film-balance to study the effect of compressed bovine lipid extract surfactant (BLES) films on oxygen transfer. A low surface tension ranging from approximately 25 mJ/m2 to 2 mJ/m2 is studied. The experimental results suggest that lung surfactant films at a low surface tension near 2 mJ/m2 provide resistance to oxygen transfer, as indicated by a decrease of 30-50% in the mass transfer coefficient (kL) of oxygen in BLES suspensions with respect to water. At higher surface tension (i.e., >6 mJ/m2), the resistance to oxygen transfer is only modest, i.e., the decrease in kL is less than 20% compared to water. The experimental results suggest that lung surfactant plays a role in oxygen transfer in the pulmonary system.  相似文献   

4.
Shortage or malfunction of pulmonary surfactant in alveolar space leads to a critical condition termed respiratory distress syndrome (RDS). Surfactant replacement therapy, the major method to treat RDS, is an expensive treatment. In this paper, the effect of poly(ethylene glycol) (PEG) to improve dynamic surface activity of a bovine lipid extract surfactant (BLES) was studied by axisymmetric drop shape analysis (ADSA) and a captive bubble method. The activity of BLES+PEG mixtures was compared to that of a natural surfactant containing surfactant proteins A and D. When PEG was added into BLES mixtures, the surface tension hysteresis of BLES films was minimized when the films were compressed by more than 50%. PEG also helps to quickly restore surfactant films after film collapse. Thus, as far as surface tension effects go, the findings suggest that PEG might be used as a substitute for surfactant-associated protein SP-A in therapeutic surfactant products, and might also be used to reduce the amount of BLES required in clinical applications.  相似文献   

5.
Natural lung surfactant contains less than 40% disaturated phospholipids, mainly dipalmitoylphosphatidylcholine (DPPC). The mechanism by which lung surfactant achieves very low near-zero surface tensions, well below its equilibrium value, is not fully understood. To date, the low surface tension of lung surfactant is usually explained by a squeeze-out model which predicts that upon film compression non-DPPC components are gradually excluded from the air-water interface into a surface-associated surfactant reservoir. However, detailed experimental evidence of the squeeze-out within the physiologically relevant high surface pressure range is still lacking. In the present work, we studied four animal-derived clinical surfactant preparations, including Survanta, Curosurf, Infasurf, and BLES. By comparing compression isotherms and lateral structures of these surfactant films obtained by atomic force microscopy within the physiologically relevant high surface pressure range, we have derived an updated squeeze-out model. Our model suggests that the squeeze-out originates from fluid phases of a phase-separated monolayer. The squeeze-out process follows a nucleation-growth model and only occurs within a narrow surface pressure range around the equilibrium spreading pressure of lung surfactant. After the squeeze-out, three-dimensional nuclei stop growing, thereby resulting in a DPPC-enriched interfacial monolayer to reduce the air-water surface tension to very low values.  相似文献   

6.
Lung surfactant (LS), a lipid–protein mixture responsible for alveolar stability, is inhibited by serum proteins leaked into the lungs in disease. Interaction of bovine lipid extract surfactant (BLES), a clinical replacement lung surfactant, with serum protein fibrinogen (Fbg) was studied employing various structural and biophysical techniques in adsorbed films and bulk bilayer dispersions. Surface tension area isotherms of the adsorbed films revealed the suppression of interfacial activity of BLES by Fbg (adsorption and surface tension reduction). Fbg, predominantly associated with the fluid phase of BLES films, resulted in the aggregation of the gel lipid domains as evidenced by atomic force microscopy. BLES bilayer dispersion showed phase transition from a diffused gel to liquid–crystalline phase in the temperature range 10–35 °C as studied by differential scanning calorimetry (DSC). Fbg resulted in the shift of peak to a higher transition temperature for the maximal heat flow (T max) of BLES dispersions. Combined Raman and FTIR spectral studies of the BLES/Fbg dispersions revealed that Fbg altered the –CH2–, –CH3, and –PO4 ? vibrational modes of the phospholipids present in BLES, suggesting the condensing and dehydrating effect of the protein on surfactant. Studies suggest that Fbg, by directly interacting with the gel lipids in LS in bulk dispersions, alter the packing of the films formed at the interface, and can be used as a specific model for lung disease.  相似文献   

7.
Pulmonary lung surfactant is a mixture of surfactants that reduces surface tension during respiration. Perfluorinated surfactants have potential applications for artificial lung surfactant formulations, but the interactions that exist between these compounds and phospholipids in surfactant monolayer mixtures are poorly understood. We report here, for the first time, a detailed thermodynamic and structural characterization of a minimal pulmonary lung surfactant model system that is based on a ternary phospholipid-perfluorocarbon mixture. Langmuir and Langmuir-Blodgett monolayers of binary and ternary mixtures of the surfactants 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-dipalmitoyl-sn-glycero-3-phosphoglycerol (DPPG) and perfluorooctadecanoic acid (C18F) have been studied in terms of miscibility, elasticity and film structure. The extent of surfactant miscibility and elasticity has been evaluated via Gibbs excess free energies of mixing and isothermal compressibilities. Film structure has been studied by a combination of atomic force microscopy and fluorescence microscopy. Combined thermodynamic and microscopy data indicate that the ternary monolayer films were fully miscible, with the mixed films being more stable than their pure individual components alone, and that film compressibility is minimally improved by the addition of perfluorocarbons to the phospholipids. The importance of these results is discussed in context of these mixtures' potential applications in pulmonary lung surfactant formulations.  相似文献   

8.
Molecular interactions between mycobacterial cell wall lipid, cord factor (CF) and the abundant surfactant lipid, dipalmitoylphosphatidylcholine (DPPC) were investigated using Langmuir monolayers at physiological temperatures (37 degrees C). Surface topography of the films was visualized by atomic force microscopy (AFM). Thermodynamic behavior of the mixed monolayers was evaluated by investigating the molecular area excess, excess Gibbs free energy of mixing and maximum compressibility modulus (SCM(max)). Cord factor formed immiscible and thermodynamically unstable monolayers with DPPC. Monolayer presence of cord factor altered the physical state of DPPC monolayers from liquid condensed to liquid expanded with the lowering of SCM(max) from 160 to 40 mN/m, respectively. AFM imaging exhibited smooth homogenous surface topography of DPPC films which in the presence of cord factor was markedly altered with the appearance of aggregates and increased surface roughness. The results highlight the capacity of cord factor to disturb DPPC monolayer organization and structure. Interfacial presence of cord factor results in DPPC monolayer fluidization. Lung surfactant function is attributed to its ability to form well packed low compressibility films. Such molecular interactions suggest a dysfunction of lung surfactant in pulmonary tuberculosis due to surfactant monolayer fluidization.  相似文献   

9.
The in vitro adsorption kinetics of lung surfactant at air-water interfaces is affected by both the composition of the surfactant preparations and the conditions under which the assessment is conducted. Relevant experimental conditions are surfactant concentration, temperature, subphase pH, electrolyte concentration, humidity, and gas composition of the atmosphere exposed to the interface. The effect of humidity on the adsorption kinetics of a therapeutic lung surfactant preparation, bovine lipid extract surfactant (BLES), was studied by measuring the dynamic surface tension (DST). Axisymmetric drop shape analysis (ADSA) was used in conjunction with three different experimental methodologies, i.e., captive bubble (CB), pendant drop (PD), and constrained sessile drop (CSD), to measure the DST. The experimental results obtained from these three methodologies show that for 100% relative humidity (RH) at 37 degrees C the rate of adsorption of BLES at an air-water interface is substantially slower than for low humidity. It is also found that there is a difference in the rate of surface tension decrease measured from the PD and CB/CSD methods. These experimental results agree well with an adsorption model that considers the combined effects of entropic force, electrostatic interaction, and gravity. These findings have implications for the development and evaluation of new formulations for surfactant replacement therapy.  相似文献   

10.
We study via molecular dynamics simulations thin films (Newton black films, NBF) consisting of water coated with sodium dodecyl sulfate (SDS) surfactants. We analyze in detail the film properties (distribution of particles, pair correlation functions, roughness of the film, tilt angle of the hydrocarbon chain, electron density profiles, and mobility of water molecules) as a function of water content in the film core (i.e., film thickness, H). Our simulations indicate that water is part of the bilayer structure as solvation water. We estimate that around 2.25 water molecules per surfactant are part of this solvation structure. The structural analysis of the NBF shows that the headgroups exhibit a high degree of in-plane ordering. We find evidence for the existence of cavities in the monolayer, where only water is present. The basic structure of the monolayer is conserved down to water contents of the order of 4 water molecules per surfactant (H approximately equal to 11 A). The computed monolayer roughness for the present model is 2.5 A, in good agreement with the experimental data. We find that the roughness is very sensitive to the details of the interatomic potentials. Water mobility calculations emphasize the sluggish dynamics of very thin NBF. Diffusion coefficients of water in the lateral direction strongly decrease with film thickness. We find that the typical mean squared displacement of water in the direction normal to the bilayer is between 9 and 80 A2. Overall, our results indicate that the equilibrium SDS Newton black films studied in the X-ray experiments contain from 2 to 4 water molecules per surfactant.  相似文献   

11.
Langmuir film behavior of bovine lipid extract surfactant (BLES), mixed with cholesterol (CHOL) and cholesterol palmitate (CHOLP), has been studied by surface pressure (pi)-area (A) measurements. Associative interactions, observed for both systems, were less favored at lower BLES content. The presence of unsaturated phospholipids and surfactant proteins in BLES favored the association. Miscibility of BLES was better with CHOLP than with CHOL at all compositions, indicating more compact packing of the BLES-CHOLP than of the BLES-CHOL system. The most stable mixtures were found at 30-40 mol% CHOL and at low pi and at 20-25 mol% CHOLP but at higher pi. These results suggest that BLES-CHOL miscibility is better at low pi and low CHOL concentrations, while BLES-CHOLP miscibility is better at high pi and high CHOLP concentrations.  相似文献   

12.
Lateral non-uniformities in surfactant distribution in drying latex films induce surface tension gradients at the film surface and lead to film thinning through surfactant spreading. Here we investigate the influence of the surfactant driven to the air-water interface, during the early stages of latex film drying, on the film thinning process which could possibly lead to film rupture. A film height evolution equation is coupled with conservation equations for particles and surfactant, within the lubrication approximation, and solved numerically, to obtain the film height, particle volume fraction, and surfactant concentration profiles. Parametric analysis identifies the effect of drying rate, dispersion viscosity and initial particle volume fraction on film thinning and reveals the conditions under which films could rupture. The results from surface profilometry conform qualitatively to the model predictions.  相似文献   

13.
Langmuir monolayers have provided experimentally accessible models for studies of lung surfactants at the air-alveolus interface since the medical necessity of lung surfactant was demonstrated by the pioneering work of Avery and Clements in the early 1960s. The fundamental goal of these in vitro studies is a molecular level understanding of the relationships between lung surfactant composition, monolayer morphology, and monolayer physical parameters such as minimum surface tension, spreading, viscosity, etc.  相似文献   

14.
In pulmonary tuberculosis, Mycobacterium tuberculosis lies in close physical proximity to alveolar surfactant. Cell walls of the mycobacteria contain loosely bound, detachable surface-active lipids. In this study, the effect of mycolic acid (MA), the most abundant mycobacterial cell wall lipid, on the surface activity of phospholipid mixtures from lung surfactant was investigated using Langmuir monolayers and atomic force microscopy (AFM). In the presence of mycolic acid, all the surfactant lipid mixtures attained high minimum surface tensions (between 20 and 40 mN/m) and decreased surface compressibility moduli <50 mN/m. AFM images showed that the smooth surface topography of surfactant lipid monolayers was altered with addition of MA. Aggregates with diverse heights of at least two layer thicknesses were found in the presence of mycolic acid. Mycolic acids could aggregate within surfactant lipid monolayers and result in disturbed monolayer surface activity. The extent of the effect of mycolic acid depended on the initial state of the monolayer, with fluid films of DPPC-POPC and DPPC-CHOL being least affected. The results imply inhibitory effects of mycolic acid toward lung surfactant lipids and could be a mechanism of lung surfactant dysfunction in pulmonary tuberculosis.  相似文献   

15.
16.
Monolayer films of hexagonal close-packed polystyrene (PS) spheres were formed at the air-water interface through a self-ordering process without using Langmuir trough. The contact angle of PS particles on the surface of water was determined by an interfacial swelling method. It was found that the concentration and the nature of surfactant had an obvious influence on the arrangement of PS particles. PS suspension containing Triton X 100 (TX 100) of an appropriate concentration self-assembled into a closely packed monolayer on the surface of water. Sodium dodecyl sulfonate, an anionic surfactant, had a relative weak influence on the arrangement of pre-dried PS particles, in contrast, had an obvious effect on newly synthesized PS particles. Quantitative ultraviolet-visible (UV-vis) absorption spectrometry indicated that about 3% of the added TX 100 was adsorbed on the PS particle surface. Laser diffraction patterns on the monolayer film were used to investigate the lattice orientation. Ultraviolet-visible-near infrared (UV-vis-NIR) spectra of monolayer films of different sized PS particles displayed that the method presented here was universal for preparation of two-dimensional (2D) colloidal crystals.  相似文献   

17.
This paper presents a continuation of the development of a drop shape method for film studies, ADSA-CSD (Axisymmetric Drop Shape Analysis-Constrained Sessile Drop). ADSA-CSD has certain advantages over conventional methods. The development presented here allows complete exchange of the subphase of a spread or adsorbed film. This feature allows certain studies relevant to lung surfactant research that cannot be readily performed by other means. The key feature of the design is a second capillary into the bulk of the drop to facilitate addition or removal of a secondary liquid. The development will be illustrated through studies concerning lung surfactant inhibition. After forming a sessile drop of a basic lung surfactant preparation, the bulk phase can be removed and exchanged for one containing different inhibitors. Such studies mimic the leakage of plasma and blood proteins into the alveolar spaces altering the surface activity of lung surfactant in a phenomenon called surfactant inhibition. The resistance of the lung surfactant to specific inhibitors can be readily evaluated using the method. The new method is also useful for surfactant reversal studies, i.e. the ability to restore the normal surface activity of an inhibited lung surfactant film by using special additives. Results show a distinctive difference between the inhibition when an inhibitor is mixed with and when it is injected under a preformed surfactant film. None of the inhibitors studied (serum, albumin, fibrinogen, and cholesterol) were able to penetrate a preexisting film formed by the basic preparation (BLES and protasan), while all of them can alter the surface activity of such preparation when mixed with the preparation. Preliminary results show that reversal of serum inhibition can be easily achieved and evaluated using the modified methodology.  相似文献   

18.
Drug delivery to the body via the inhaled route is dependent upon patient status, device use, and respirable formulation characteristics. Further to inhalation, drug‐containing particles interact and dissolve within pulmonary fluid leading to the desired pharmacological response. Pulmonary surfactant stabilises the alveolar air‐liquid interface and permits optimal respiratory mechanics. This material represents the initial contacting surface for all inhaled matter. On dissolution, the fate of a drug substance can include receptor activation, membrane partitioning and cellular penetration. Here, we consider the partitioning behaviour of salbutamol when located in proximity to a simulated pulmonary surfactant monolayer at pH 7. The administration of salbutamol to the underside of the surfactant film resulted in an expanded character for the 2‐dimensional ensemble and a decrease in the compressibility term. The rate of drug partitioning was greater when the monolayer was in the expanded state (ie, inhalation end‐point), which was ascribed to more accessible areas for molecular insertion. Quantum mechanics protocols, executed via Gaussian 09, indicated that constructive interactions between salbutamol and integral components of the model surfactant film took the form of electrostatic and hydrophobic associations. The favourable interactions are thought to promote drug insertion into the monolayer structure leading to the observed expanded character. The data presented herein confirm that drug partitioning into pulmonary surfactant monolayers is a likely prospect further to the inhalation of respirable formulations. As such, this process holds potential to reduce drug‐receptor activation and/or increase the residence time of drug within the pulmonary space.  相似文献   

19.
The adsorption behavior of dipalmitoylphosphatidylcholine (DPPC), which is the major component of lung surfactant, at the air/aqueous interface and the competitive adsorption with bovine serum albumin (BSA) were studied with tensiometry, infrared reflection absorption spectroscopy (IRRAS), and ellipsometry. Dynamic surface tensions lower than 1 mN/m were observed for DPPC dispersions, with mostly vesicles, prepared with new protocols, involving extensive sonication above 50 °C. The lipid adsorbs faster and more extensively for DPPC dispersions with vesicles than with liposomes. For DPPC dispersions by a certain preparation procedure at T > Tc, when lipid particles were observed on the surface, dynamic surface tensions as low as 1 mN/m were measured. Moreover, IRRAS intensities and ellipsometric δΔ values were found to be much higher than the values for other DPPC dispersions or spread DPPC monolayers, suggesting that a larger amount of liposomes or vesicles adsorb on the surface. For DPPC/BSA mixtures, the tension behavior is controlled primarily by BSA, which prevents the formation of a dense DPPC monolayer. When BSA is injected into the subphase with a spread DPPC monolayer or into a DPPC dispersion with preadsorbed layers, little or no BSA adsorbs and the DPPC layer remains on the surface. When a DPPC monolayer is spread on a BSA solution at 0.1 wt% at 25 °C, then DPPC lipid can displace the adsorbed BSA molecules. The lack of BSA adsorption, and the expulsion of BSA by DPPC monolayer is probably due to the strong hydrophilicity of the lipid polar headgroup. When a DPPC dispersion is introduced with Trurnit's method or when dispersion drops are sprayed onto the surface of a DPPC/BSA mixture, the surface tension becomes lower and is controlled by DPPC, which can prevent the adsorption of BSA. The results may be important in understanding inhibition of lung surfactants by serum proteins and in designing efficient protocols of surfactant preparation and administration.  相似文献   

20.
Inhaled particles may land on the surface of the lung’s airspaces. Upon making contact with the airway wall, the processes of retention and clearance begin. Particle retention depends on many factors; among these are: (1) particle size, shape, solubility, surface chemistry and elastic properties of both the particles and the lung surface. (2) The anatomical location of the deposition site. (3) The structures with which the particle interacts at the site of deposition, including the surfactant film at the air–liquid interface, the aqueous phase, free cells like macrophages, lymphocytes and granulocytes, the epithelial cells and dendritic cells that reside at the basal side of the epithelium. Particles, after their deposition are wetted and displaced towards the epithelium by the surfactant film during the retention process. In vitro experiments have demonstrated that the extent of particle immersion depends on the surface tension of the surfactant film. The lower the surface tension, the greater is the immersion of the particles into the aqueous phase. Experimental results demonstrate consistently greater immersion of smaller particles into a liquid substrate covered with a surfactant film than that for larger particles. The exact mechanism, especially the initial wetting process, is not yet understood and requires further experiments. Line tension is a possible explanation for the dependence of particle displacement on particle size.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号