太赫兹片上系统和基于微纳结构的太赫兹超宽谱源的研究进展

目前太赫兹辐射信号的功率不高,辐射带宽也较窄,这些对于生物化学、含能材料的太赫兹检测应用领域来说是一大限制因素,因此如何获得宽谱高功率的太赫兹源对于太赫兹时域光谱系统的发展是非常重要的;另一方面,常规的太赫兹系统是在自由空间传输探测的,测量过程需要在氮气或者干燥空气环境中进行,以克服空气中水的吸收干扰,同时自由空间中的光场与物质相互作用的模式又降低了物质检测的灵敏度,这对于痕量物质检测来说构成了挑战.面对这一问题,太赫兹片上系统利用微纳结构中的局域场效应实现对物质的低浓度检测,此方案有助于解决这一应用难题.综上所述,本文分成以下两部分阐述:首先阐述了纳米金属薄膜作为新的太赫兹源,它可以同时产生非相干的和相干的太赫兹信号,其输出为超过100 THz的太赫兹-红外辐射,功率高达10 mW,这种超宽谱和高功率现象主要是由于非相干的热辐射效应引起的;第二,阐述了基于不同传输线结构、不同基底材料的太赫兹片上系统结构设计和光谱应用.基于共面带状线结构和聚合物材料基底的太赫兹片上系统有着较低的损耗,能够实现超过2 THz带宽的测量和生物化学应用.     

Electrooptic sampling of low temperature GaAs pulse generators for oscilloscope calibration

Optoelectronic generation of well characterized ultrashort electrical pulses plays an important role in the calibration of fast-sampling oscilloscopes. In this paper the authors describe the National Physical Laboratory (NPL) pulse generator, comprising a femtosecond laser and an ultrafast photoconductive switch which can generate electrical pulses as short as 650 fs. The photoconductive switch consists of a GaAs substrate with a top GaAs layer grown under low temperature conditions to ensure a subpicosecond recombination rate. The technique of electrooptic sampling is used to measure pulses on planar transmission lines, such as coplanar waveguide and coplanar stripline. Good agreement is shown between electrooptic sampling measurement and the modelling of pulse propagation along a coplanar waveguide, enabling one to optimize a design of a calibration test source. The use of a pulse generator to calibrate a 50 GHz sampling oscilloscope is described.     

环状烯烃聚合物基底材料的太赫兹复介电常数和损耗特性研究

太赫兹时域光谱(THz-TDS)已被用于研究包括液体,半导体,爆炸物和气体等多种材料。然而自由空间太赫兹光谱系统存在着一些检测局限性,如微量物质难以被检测、系统尺寸难以实现微型化、空气中水的强烈吸收引起的信号衰减较大等问题。为了解决这些问题,研究人员设计了基于金属波导传输线结构的太赫兹芯片集成器件,通过飞秒红外激光激励传输线上的光电导材料实现太赫兹波的产生和检测。然而,在这些芯片上传输的太赫兹信号的频谱宽度很难达到自由空间太赫兹时域光谱系统的频带宽度,一个重要原因是由于传输信号受到随频率增加的传输线损耗所导致的衰减。通常这些损耗主要由三个部分组成：导体损耗,介电损耗和辐射损耗。研究表明：使用低介电常数材料作为共面传输线的衬底,将减少这种介电常数的失配,从而避免冲击波辐射损失;使用具有低损耗角正切的基底材料可以减少太赫兹传输线的损耗。环烯烃聚合物(COP)是一种具有环状烯烃结构的非晶性透明共聚物的材料,在太赫兹波段具有很高的透射率,为了探究这种材料是否能用于共面传输线的衬底,需要通过太赫兹时域光谱技术和介电函数理论分析它在太赫兹频段的光谱和介电特性,以及对这种材料作为基底时用在太赫兹传输线的传输特性进行仿真计算分析。使用透射式太赫兹时域光谱系统,对三种COP、熔融石英和PMMA进行了光谱测试,提取了它们的透射时域信号,采用Dorney和Duvillaret等提出的物理模型计算复介电函数。实验表明：与其他两种材料相比,COP材料在1 THz处的透过率更高,可以达到94.5%,同时介电损耗和介电常数更低,其中介电损耗在1 THz处达到4.31×10-4,因此将COP作为传输线基底材料时能有效减少基底的介电损耗。同时COP材料的介电常数在0.2～2.8 THz范围内维持在约2.3的水平,也有效减弱了辐射损耗。对实验材料基底组成的共面波导传输线进行了HFSS模拟,获得了它们的正向传输衰减系数(S₂₁ parameter),并对由基底引起的介电损耗和辐射损耗进行了计算分析。模拟和计算结果也表明在同一传输线结构下,与其他材料相比COP作为基底时的损耗更小。通过太赫兹时域光谱法与介电响应分析,表明了在太赫兹波段具有较低介电常数的COP材料更适合作为太赫兹传输线结构的基底材料,它可以有效的降低因基底引起的介电损耗和辐射损耗。这为太赫兹传输线的设计过程中衬底材料的选择与应用提供了实验和理论依据。     

Generation, measurement of 1.5ps ultrafast electrical pulse and its propagation on the microstrip line

We have designed a kind of coplanar stripline optical switch—Pockles cell (Cr: GaAs—LiTaO_3). Electrical pulses with 10%—90% risetime of 1.5ps have been achieved by using electrooptic sampling. We have also measured the pulse width at different distances when the ps electrical pulse propagates along the coplanar stripline.     

共面微带传输线超短电脉冲传输特性

本文用快速傅里叶变换对LTGaAs衬底共面微带传输线光生超短电脉冲的时域传输特性进行了数值计算结果表明,THz以上高频范围的模式色散、LTGaAs衬底切伦科夫辐射衰减使超短电脉冲信号沿LTGaAs衬底共面微带传输线超传输时波形畸变,初始光生电脉冲越窄,则信号波形畸变越严重减簿衬底厚度可降低LTGaAs衬底共面微带传输线的模式色散和辐射衰减,有利于改善LTGaAs衬底共面微带传输线亚皮秒超短电脉冲的传输特性.     

Optical generation of terahertz plasmons on comb-shaped surface of metal

The possibilities of a recently proposed (Opt. Express 17, 9323 (2009)) method for generating terahertz surface plasmons on a microstructured (comb-shaped) metal surface using a nonlinear polarization pulse that moves with a superluminal velocity and is induced by an ultrashort laser pulse in a strip of electrooptic material deposited on the surface are theoretically studied. For an arbitrary direction of motion of the nonlinear source along the comb-shaped surface, fields of excited terahertz plasmons and the angular spectral distribution of the radiated energy are calculated. It is shown that the spectral and energy characteristics of plasmons can be efficiently controlled by varying the direction of motion of the source. Conditions (parameters of the comb-shaped structure, direction and velocity of motion of the source) that ensure the maximal efficiency of the optical-to-terahertz conversion are found. The developed method of terahertz generation is promising for surface terahertz spectroscopy.     

Terahertz wave narrow bandpass filter based on photonic crystal

We designed a narrow bandpass terahertz wave filter using photonic crystals with a line defect. An inserted linear defect in one-dimensional photonic crystal structures for a channeled filtering in the terahertz range are studied and designed theoretically. By using transfer matrix method, we examined the transmittance spectra for the proposed terahertz wave filter has a 3 dB transmission loss bandwidth of 20 MHz ranging from 0.29998 THz to 0.30001 THz. The simulated results show that a very narrow transmission band and high transmission (higher than 99.99%) centered at λ₀, and very sharp edges can be achieved.     

Experimental research on spectrum and imaging of continuous-wave terahertz radiation based on interferometry

A system for measuring terahertz spectrum is proposed based on optical interferometer theory, and is experimentally demonstrated by using a backward-wave oscillator as the terahertz source. A high-resolution, high-precision interferometer is constructed by using a pyroelectric detector and a chopper. The results show that the spectral resolution is better than 1 GHz and the relative error of frequency is less than 3%. The terahertz energy density distribution is calculated by an inverse Fourier transform and tested to verify the feasibility of the interferometric approach. Two kinds of carbon-fiber composites are imaged. The results confirm that the interferometer is useful for transmission imaging of materials with different thickness values.     

High efficiency terahertz diffraction grating with trapezoidal elements

A newly designed grating used in terahertz region is proposed, which is composed of the trapezoidal elements repeated successively along one dimension of the substrate, and uniform interval(the grating period) repeated along the other dimension. The transmission of the grating owns a designable trapezoidal profile dependent on the geometric dimensions of the element. The far-field diffraction patterns of a designed grating at incident broadband terahertz frequencies, with element dimensions of upper, lower side and period of 50, 250, and 300 μm, respectively, are simulated by the scalar diffraction theory. The simulation results indicate that the terahertz grating exhibits a property of single-order diffraction,and the diffraction efficiency of the first order reaches 6.6%, exceeding that of a traditional sinusoidal amplitude grating with identical period and duty cycle. Owing to the regular architecture and the high single-order diffraction efficiency, the grating is easy to fabricate and shows great potential applications in single-shot spectral measurements of weak broadband terahertz pulse.     

Spin dynamics at low microwave frequencies in crystalline Fe ultrathin film double layers using co-planar transmission lines

Magnetic damping has been studied in magnetic double layers using a network analyzer (NA) with a coplanar transmission line. The magnetic films consisted of ultrathin crystalline films of Fe separated by an Au spacer. The films were deposited on GaAs(0 0 1) substrates using the molecular beam epitaxy (MBE) technique. NA-ferromagnetic resonance (NA-FMR) measurements were carried out along the magnetic hard axis, allowing one to follow the frequency FMR linewidth down to the 1 GHz range of frequencies. It will be shown that the FMR linewidth in the NA-FMR measurements is not entirely described by Gilbert damping. The additional contribution in the frequency linewidth increases with decreasing frequency, and is most likely caused by dipolar fields associated with an inhomogeneous RF field around the coplanar transmission line.     

A traveling-wave stripline dipole antenna on a substrate lens at terahertz frequency

In this paper, a study of a stripline dipole antenna on a substrate lens used as a photoconductive detector in a terahertz system is presented. The traveling-wave behavior of the stripline dipole and the influence of the substrate lens are investigated over a broad frequency range up to 5.0 THz. The numerical results show that the lens shape represented by the ratio of the extension length to the lens radius plays an important role in maximizing the antenna gain and radiation spectral bandwidth. The gain response exhibited an increased level of sensitivity to the lens shape as the lens size increased, and this is particularly important in optimizing large substrate lenses. Improvements in the gain level over the entire frequency range of interest were observed as the lens diameter increased. This study provides helpful guidelines in choosing and optimizing a substrate lens designed for a terahertz photoconductive antenna, which is particularly useful for specific applications requiring a miniaturized photoconductive antenna design.     

基于LT-GaAs外延片的THz片上系统

太赫兹（THz）波在物质检测方面发挥着巨大的作用,是一种非常有潜力的生化传感工具。但是传统的太赫兹时域光谱系统（TDS）结构复杂,系统的集成度低,占用空间较大。所以,如何对THz波进行有效引导、实现集成化传输并得到高质量光谱就成为太赫兹光谱系统的研究热点。太赫兹片上系统是将THz的产生、传输以及探测都集成到同一芯片上,然后通过相干探测的方法获得THz时域光谱。它可以实现对多种样品的检测,尤其在对难于取样的微量样品探测方面具有广泛的应用价值。它无需光路准直,操作简便,成品率高。两个研究工作都是基于低温砷化镓(LT-GaAs)外延片开展的。首先将一根直径为200 μm的铜线固定在LT-GaAs外延片的上方,通过真空蒸镀的方法制备出天线电极,同时得到天线间隙,研制出基于LT-GaAs外延片的THz天线。利用波长为800 nm的飞秒激光对其进行测试,得到了质量较高的THz信号,验证了天线的实用性。然后在另一外延片上利用光刻微加工工艺制作出传输线和微电极,得到了集成的THz片上系统。使用波长为1 550 nm的飞秒激光分别激发片上系统的太赫兹产生天线和探测天线,天线产生的太赫兹波在传输线上传播,在探测端同样得到了质量较高的THz时域信号,证实了THz片上系统的可行性。该方法省去了腐蚀牺牲层以及LT-GaAs薄膜的转移、键合等步骤,极大地提高了片上系统的成品率,避免了薄膜转移过程中易破碎及腐蚀液存在毒性的问题。最后,研究了外加电压对从片上系统中获得的THz波性能的影响,结果为电压越高,THz波的信号强度越强;另外,通过在传输线上方垂直放置铜箔的方法验证了THz波沿着传输线传播的事实。该研究中采用的基于LT-GaAs外延片的片上系统的制备方法简单,制作周期短,制作过程安全,应用领域广泛,这为将来与微流控芯片相结合实现对液体样品的探测打下了基础。     

Terahertz radiation source in air based on bifilamentation of femtosecond laser pulses

A new terahertz (THz) source in air based on the bifilamentation of femtosecond laser pulses is reported. This THz radiation is 1 order of magnitude more intense than the transition-Cherenkov THz emission from femtosecond laser filaments reported recently and shows different angular and polarization properties. We attribute it to the emission from a bimodal transmission line created by two plasma filaments.     

Analysis of Asymmetrical Coplanar Strip Lines with Finite Boundary Substrate

Analytical closed-form expressions for the quasi-TEM parameters for asymmetrical coplanar strip lines (ACPS) with finite boundary substrate are obtained using conformal mapping method. The formulations are CAD-oriented purpose. The calculated results are compared with those obtained for a corresponding ACPS assumed that the substrate is infinite. The analyses are useful for MMIC's designs and transmission line theory.     

A novel integrated MEMS helix antenna for terahertz applications

This paper reports the design and analysis of a novel helix antenna based on Micro-electromechanical Systems (MEMS) technology, which is used in terahertz (THz) applications. The structure of the antenna includes two parts, the metallic helix and the coplanar waveguide (CPW) on the substrate for feed, the fabrication of the structure needs only one wafer, and the antenna can be easily integrated with other parts of on-chip circuits. There are many tunable parameters of the helix, so that high performance THz antenna can be achieved by optimizing these parameters. The proposed antenna can be manufactured by MEMS processing with low fabrication cost, suitable for many terahertz systems.     

基于双向长短期记忆网络的太赫兹光谱识别

特征提取是太赫兹光谱识别的关键处理步骤,通常利用降维方法作为特征提取手段。然而,当一些化合物的太赫兹光谱曲线整体差异度较小时,降维方法往往会缺失样本差异的重要特征信息,从而导致分类错误。如果不采用降维方法提取特征,传统机器学习分类算法对维数较高的原始太赫兹光谱数据又不能很好的分类。针对此问题,提出了一种基于双向长短期记忆网络（BLSTM-RNN）自动提取太赫兹光谱特征的识别方法。BLSTM-RNN作为一种特殊的循环神经网络,利用其LSTM单元可以有效解决原始太赫兹光谱数据维数较高使得模型难以训练问题。再结合模型的双向频谱信息利用架构模式,可以增强模型对复杂光谱数据自动提取有效特征信息的能力。采用三类、15种化合物太赫兹透射光谱作为测试对象,首先利用S-G滤波和三次样条插值对Anthraquinone,Benomyl和Carbazole等十五种化合物在0.9～6 THz内的太赫兹透射光谱数据进行归一化处理,然后通过构建一个具有双向长短期记忆的循环神经网络对太赫兹光谱的全频谱信息进行自动特征提取并利用Softmax分类器进行分类。通过试验优化网络结构和各项参数,最终获得了针对复杂太赫兹透射光谱数据的预测模型,并与传统机器学习算法SVM,KNN及神经网络算法MLP,CNN进行对比实验。结果表明,dataset-1和dataset-2分别作为差异度较大和无明显峰值特征的五种化合物太赫兹透射光谱数据集,其平均识别率分别为100%和98.51%,与其他方法相比识别率有所提高;最重要的是,dataset-3作为5种化合物谱线极为相似的太赫兹透射光谱数据集,其平均识别率为96.56%,与其他方法相比识别率提高显著;dataset-4作为dataset-1,dataset-2和dataset-3的透射光谱数据集集合,其平均识别率为98.87%。从而验证了BLSTM-RNN模型能自动提取有效的太赫兹光谱特征,同时又能保证复杂太赫兹光谱的预测精度。在选择模型训练优化算法方面,使用Adam优化算法要好于RMSProp,SGD和AdaGrad,其模型的目标函数损失值收敛速度最快。同时随着模型训练迭代次数增加,相似太赫兹透射光谱数据集的预测准确率也不断提升。可为复杂太赫兹光谱数据库的光谱识别检索提供一种新的识别方法。     

分布式负载平行板有界波电磁脉冲模拟器的模拟分析

将并行时域有限差分方法用于分布式负载平行板有界波电磁脉冲模拟器模拟,并给出模拟器的尺寸参数对工作空间半高处几个测试点场的影响。研究结果表明:与源在x轴向距离上越靠近的点,其电场的上升沿越小;模拟器传输线最大宽度和最大高度之比为2,且下金属板宽度与传输线最大宽度相同时,测试点场的上升沿较小,半高宽较大;随着传输线在x方向投影长度的增加,与源位置x轴向等距离的测试点场的峰值增大,场的上升沿减小,但减小的量趋于平缓。且同轴线馈电时得到的各测试点场脉冲的上升沿要比直接加平面电场源的方式更大一点,半高宽则要小一点,但两者波形相似。     

BEPCⅡ试验束束流位置探测器的研制

 为实现试验束束流位置的非拦截测量,研制了3个条形电极束流位置探测器和一批真空定位子。利用高定位精度电控精度电控位移平台对这3个探测器分别进行了标定,随后进行了束流初步试验。探测器主要由位于真空管道内的4条1 mm厚不锈钢条带构成,条带上感应信号的大小反映束流位置的变化。给出了探测器的定标系数、系统特性阻抗和端口传输系数。     

Analytical analysis of circular-shaped microshield and conductor-backed coplanar waveguide

In this paper, a new type of circular-shaped microshield and conductor-backed coplanar waveguide is proposed. Analytic closed-form expressions for characteristic impedance and effective dielectric constant for the new line are obtained using conformal mapping method under the assumption of pure-TEM propagation and zero dispersion. The new waveguide proposed by this paper can reduce radiation to much less than the conventional coplanar waveguide and microstrip, and can reduce the current concentration at both the edges of the strip conductor.     

一种有效提高太赫兹时域光谱装置成像空间分辨率的方法

太赫兹波成像技术一个最显著的制约因素是其有限的空间分辨率。提出通过在样品前加小孔的方法来提高传统太赫兹时域光谱装置成像的空间分辨率。采用在样品前约2 mm处加直径为0.5 mm小孔的方法使成像的空间分辨率从1.276 mm提高到0.774 mm,提高0.502 mm,约39％。通过这个简单的方法在传统的太赫兹时域光谱成像装置上实现了空间分辨率从毫米量级到亚毫米量级的提高。聚乙烯板上直径为1 mm的小孔被作为成像的研究对象,分别采用传统的太赫兹时域光谱装置对样品进行直接成像和在样品前约2 mm处加直径为0.5 mm的小孔后对样品成像两种方式,并采用损失成像中信噪比较好的能量损失成像,对比两种方式得到的样品的太赫兹像,结果显示聚乙烯板上小孔的边界加小孔后成像比不加小孔直接成像明显清晰。证实了在样品前加小孔可以有效的提高太赫兹成像系统的空间分辨率。从理论上对通过在样品前加小孔提高系统空间分辨率的方法进行了分析,指出小孔尺寸越小,系统的空间相干长度越大,空间分辨率越高,但同时太赫兹信号的强度会相应减小。该方法可以简单有效的提高太赫兹时域光谱装置成像的空间分辨率,从而进一步拓展太赫兹谱成像技术的应用领域。