Bio-inspired colorimetric detection of Hg<Superscript>2+</Superscript> and Pb<Superscript>2+</Superscript> heavy metal ions using Au nanoparticles

Heavy metal ions are highly toxic species which can cause long-term damage to biological systems. These species are known to disrupt biological events at the cellular level, cause significant oxidative damage, and are carcinogens. The production of simple, in-field detection methods that are highly sensitive for these cations is highly desirable in response to global pollution. In that regard, bio-inspired colorimetric sensing systems have been developed to detect Hg²⁺ and Pb²⁺, and other cations, down to nmol L⁻¹ concentrations. The benefits of these systems, which are reviewed herein, include cost-effective production, facile usage, and a visual color change for the detection method. Such advantages are significant positive steps for heavy metal ion detection, especially in regions where sophisticated laboratory studies are prohibited. Figure Biological-based colorimetric detection of heavy metal cations. The materials on the left are independent Au nanoparticles in solution, functionalized with heavy metal binding biomolecules, which, upon metal addition, aggregate to evolve a detectable solution color change.

Development of the <Emphasis Type="Italic">k</Emphasis><Subscript>0</Subscript>-based cyclic neutron activation analysis for short-lived radionuclides

The k ₀-based cyclic neutron activation analysis (k ₀-CNAA) technique has been studied to explore the applicability at the Portuguese research reactor (RPI). In particular, for the determination of elements which form short-lived radionuclides, particularly fluorine (²⁰F, 11.16 s half-life) and selenium (^77mSe, 17.36 s half-life) in polymer, biological and environmental samples. The detection limits obtained for F and Se were about 50 and 0.01 mg kg⁻¹, respectively, in the investigated materials. The timing parameters for the procedure were 10 to 20 s for irradiation, 5 s decay, 10 to 20 s counting, 5 s waiting and performed with eight cycles. The k ₀-IAEA program was modified to use millisecond time resolution for irradiation, decay and counting times as needed for interpreting k ₀-CNAA data in terms of concentration, accuracy and detection limit. The quality control of the procedure was performed by preparing a standard solution containing fluorine with different contents as well as using the certified reference materials containing selenium from which the bias between the results and the certified values were within 15% for most elements at the investigated content ranges. The analytical results for several other elements producing short-lived or detectable radionuclides, e.g., Al, Ca, Cl, Cu, Dy, I, Mg, Mn, Ti, and V were also obtained by the k ₀-CNAA procedure with accuracy within 12%.     

Heat capacity and magnetic phase transition of two-dimensional metal-assembled complex (NEt<Subscript>4</Subscript>)[{Mn<Superscript>III</Superscript>(salen)}<Subscript>2</Subscript>Fe<Superscript>III</Superscript>(CN)<Subscript>6</Subscript>]

Summary Heat capacity measurements of the two-dimensional metal-assembled complex, (NEt₄)[{Mn^III(salen)}₂Fe^III(CN)₆] [Et=ethyl, salen= N,N’-ethylenebis(salicylideneaminato) dianion], were performed in the temperature range between 0.2 and 300 K by adiabatic calorimetry. A ferrimagnetic phase transition was observed at T_c1=7.51 K. Furthermore, another small magnetic phase transition appeared at T_c2=0.78 K. Above T_c1, a heat capacity tail arising from the short-range ordering of the spins characteristic of two-dimensional magnets was found. The magnetic enthalpy and entropy were evaluated to be ΔH=291 J mol^-1 and ΔS=27.4 J K^-1 mol^-1, respectively. The experimental magnetic entropy agrees roughly with ΔS=Rln(5·5·2) (=32.5 J K^-1 mol^-1; R being the gas constant), which is expected for the metal complex with two Mn(III) ions in high-spin state (spin quantum number S=2) and one Fe(III) ion in low-spin state (S=1/2). The heat capacity tail above T_c1 became small by grinding and pressing the crystal. This mechanochemical effect would be attributed to the increase of lattice defects and imperfections in the crystal lattice, leading not only to formation of the crystal with a different magnetic phase transition temperature but also to decrease of the magnetic heat capacity and thus the magnetic enthalpy and entropy.     

Mineralization of TiO<Subscript>2</Subscript> nanoparticles for the determination of titanium in rat tissues

In order to draw appropriate conclusions about the possible adverse biological effects of titanium dioxide nanoparticles (TiO₂—NPs), the so-called “dose?effect” relationship must be explored. This requires proper quantification of titanium in complex matrices such as animal organs for future toxicological studies. This study presents the method development for mineralizing TiO₂—NPs for analysis of biological tissues. We compared the recovery and quantification limits of the four most commonly used mineralization methods for metal oxides. Microwave-assisted dissolution in an HNO3–HF mixture followed by H₂O₂ treatment produced the best results for a TiO₂—NPs suspension, with 96 ± 8% recovery and a limit of quantification as low as 0.9 µg/L. This method was then used for the determination of titanium levels in tissue samples taken from rats. However, our tests revealed that even this method is not sensitive enough for quantifying titanium levels in single olfactory bulbs or hippocampus in control animals.     

Molecular modeling of hydration properties of hydrophobic ions Li<Superscript>+</Superscript>@C<Subscript>60</Subscript> and K<Superscript>+</Superscript>@C<Subscript>60</Subscript>

The Gibbs free energies of solvation (ΔG _s) and the electronic structures of endohedral metallofullerenes M⁺@C₆₀ (M⁺= Li⁺, K⁺) were calculated within the framework of the density functional theory and the polarizable continuum model. In water environment, the equilibrium position of K⁺ is at the center of the fullerene cavity whereas that of Li⁺ is shifted by 0.14 nm toward the fullerene cage. The Li⁺ cation is stabilized by interactions with both the fullerene and solvent. The equilibrium structures of both endohedral metallofullerenes are characterized by very close ΔG _s values. In particular, the calculated ΔG _s values for K⁺@C₆₀ are in the range from −124 to −149 kJ mol⁻¹ depending on the basis set and on the type of the density functional. Molecular dynamics simulations (TIP3P H₂O, OPLS force field, water sphere of radius 1.9 nm) showed that the radial distribution functions of water density around C₆₀ and M⁺@C₆₀ are very similar, whereas orientations of water dipoles around the endohedral metallofullerenes resemble the hydration pattern of isolated metal ions.     

Reaction of the novel Ru<Subscript>3</Subscript>(CO)<Subscript>10</Subscript>[Ph<Subscript>2</Subscript>P(CH<Subscript>2</Subscript>)<Subscript>2</Subscript>Si(OEt<Subscript>3</Subscript>)]<Subscript>2</Subscript> complex on SBA-15 and MCM-41 mesoporous silicas

The reaction of Ru₃(CO)₁₂ with 2(diphenylphosphino)ethyl-triethoxysilane (DPTS) in hydrocarbons, leads to the functionalized Ru₃(CO)_12−n [Ph₂P(CH₂)₂Si(OEt₃)] _n (n = 1,2) complexes. The complex with two phosphine substituents was chemically anchored on mesoporous silicas, SBA-15 and MCM-41, in order to obtain two hybrid materials characterized by a different localization of the metal centre on the surface of the porous supports. A detailed investigation of the cluster, before and after chemical anchoring on the mesoporous silicas, was pursued. Particular attention was also devoted to the study of the morphological, structural and textural properties of the metal-functionalised silicas (Ru/SBA-15 and Ru/MCM-41) by infrared spectroscopy (FT-IR), scanning electron microscopy, X-ray diffraction and N₂ physisorption analysis.     

Advances in <Superscript>79</Superscript>Se analyses on Savannah river site radioactive waste matrices

Waste cleanup efforts underway at the United States Department of Energy’s (DOE) Savannah River Site (SRS) in South Carolina, as well as other DOE nuclear sites, have created a need to characterize ⁷⁹Se in radioactive waste inventories. Successful analysis of ⁷⁹Se in high activity waste matrices is challenging for a variety of reasons. As a result of these unique challenges, the successful quantification of ⁷⁹Se in the types of matrices present at SRS requires an extremely efficient and selective separation of ⁷⁹Se from high levels of interfering radionuclides. A robust ⁷⁹Se radiochemical separation method has been developed at the Savannah River National Laboratory (SRNL) which is routinely capable of successfully purifying ⁷⁹Se from a wide range of interfering radioactive species. In addition to dramatic improvements in the K_d, ease, and reproducibility of the analysis, the laboratory time has been reduced from several days to only 6 h.     

Thermodynamics of citrate complexation with Mn<Superscript>2+</Superscript>, Co<Superscript>2+</Superscript>, Ni<Superscript>2+</Superscript> and Zn<Superscript>2+</Superscript> ions

Isothermal titration calorimetry has been used to determine the stoichiometry, formation constants and thermodynamic parameters (ΔG ^o, ΔH, ΔS) for the formation of the citrate complexes with the Mn²⁺, Co²⁺, Ni²⁺ and Zn²⁺ ions. The measurements were run in Cacodylate, Pipes and Mes buffer solutions with a pH of 6, at 298.15 K. A constant ionic strength of 100 mM was maintained with NaClO₄. The influence of a metal ion on its interaction energy with the citrate ions and the stability of the resulting complexes have been discussed.     

Synthesis and crystal structure of a mixed valence heteropoly green compound, (PPh<Subscript>4</Subscript>)<Subscript>4</Subscript>[PMo<Subscript>12</Subscript>O<Subscript>40</Subscript>], and its use as a catalyst in olefin epoxidation

A green heteropolyblue compound, (PPh₄)₄[PMo₁₂O₄₀] · 3DMF(1), has been synthesized from MoO₃, H₂O₂ and H₃PO₄ in acetylacetone medium and crystallized from N,N-dimethylformamide. Compound 1 was characterized by analytical and spectroscopic methods, and X-ray structure analysis. The compound is a one-electron paramagnet and shows a featureless and cubic EPR spectrum with <g> = 1.95 in DMF glass. The complex shows a Mo(V)–Mo(IV) couple, which has been studied by cyclic voltammetric and coulometric methods. The compound acts as an efficient olefin epoxidation catalyst with H₂O₂ as oxidant and NaHCO₃ as co-catalyst. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Synthesis of pyridyl derivatives for the future functionalization of biomolecules labeled with the fac-[<Superscript>188</Superscript>Re(CO)<Subscript>3</Subscript>(H<Subscript>2</Subscript>O)<Subscript>3</Subscript>]<Superscript>+</Superscript> precursor

In this paper, we investigated three ligand systems, symmetric and asymmetric pyridyl-containing tridentate ligands (L¹NH₂ = (bis(2-pyridylmethyl)-amino)-ethylamine, L²H = (bis(2-pyridylmethyl)-amino)-acetic acid, L³NH₂ = [(6-amino-hexyl)-pyridyl-2-methyl-amino]-acetic acid) as bifunctional chelating agents for labeling biomolecules. These ligands reacted with the precursor fac-[¹⁸⁸Re(CO)₃(H₂O)₃]⁺ and yielded the radioactive complexes fac-[¹⁸⁸Re(CO)₃L] (L = three ligands), which were identified by RP-HPLC. The corresponding stable rhenium tricarbonyl complexes (1–3) were allowed for macroscopic identification of the radiochemical compounds. ¹⁸⁸Re tricarbonyl complexes, with log P _o/w values ranging from −1.36 to −0.32, were obtained with yields of ≥90% using ligand concentrations within the 10⁻⁶−10⁻⁴M range. Challenge studies with cysteine and histidine revealed the high stability properties of these radioactive complexes, and biodistribution studies in normal mice indicated a fast rate of blood clearance and high rate of total radioactivity excretion, primarily through the renal-urinary pathway. In summary, these asymmetric and symmetric pyridyl-containing tridentate ligands are potent bifunctional chelators for the future biomolecules labeling of fac-[¹⁸⁸Re(CO)₃(H₂O)₃]⁺.     

Study on the method of preparation <Superscript>97</Superscript>Tc

Technetium-99 is one of several long-lived fission products which, when detected in the environment can give an indication of a specific nuclear activity. The most sensitive analytical technique for ⁹⁹Tc yet reported is by isotopic dilution mass spectrometry with technetium-97 as the yield tracer. A method for the preparation of ⁹⁷Tc is reported in this paper. ⁹⁷Tc was obtained by irradiation of a sample of natural ruthenium metal in a high flux reactor. After cooling for 2 years, the technetium was isolated from the sample by technique combining; deposition, solvent extraction, and ion-exchange chromatography techniques. ^99mTc and ¹⁰³Ru were used as radio-tracers for the process. The results showed that more than 70% of the Tc was recovered the decontamination factor is more than 2.3 × 10⁷. The ⁹⁷Tc was calibrated by isotope dilution mass spectrometry with ⁹⁹Tc as the yield tracer. The final yield was 29.56 μg of ⁹⁷Tc suitable for use as a mass spectrometric spike (weight % ⁹⁷Tc spike: ⁹⁷Tc, 84.77%; ⁹⁸Tc, 15.03%; ⁹⁹Tc, 0.20%).     

Silicate complexation of NpO<Subscript>2</Subscript><Superscript>+</Superscript> ion in perchlorate media

Complexation behavior of NpO₂ ⁺ with ortho-silicic acid (o-SA) has been studied using solvent extraction at ionic strengths varying from 0.10 to 1.00M (NaClO₄) at pcH 3.68±0.08 and 25 °C with bis-(2-ethylhexyl) phosphoric acid (HDEHP) as the extractant. The stability constant value (log β₁) for the 1:1 complex, NpO₂(OSi(OH)₃), was found to decrease with increase in ionic strength of the aqueous phase [6.83±0.01 at I=0.10M to 6.51±0.02 at I = 1.00M]. These values have been fitted in the SIT model expression and compared with similar values of complexation of the metal ions Am³⁺, Eu³⁺, UO₂ ²⁺, PuO₂ ²⁺, Np⁴⁺, Ni²⁺ and Co²⁺. The speciation of NpO₂ ⁺-o-silicate/carbonate system has been calculated as a function of pcH under ground water conditions. On leave from Radiochemistry Division, Bhabha Atomic Research Centre, Trombay, Mumbai-400 085, India.     

Interference of non-specific peroxidases in the fluorescence detection of superoxide radical by hydroethidine oxidation: a new assay for H<Subscript>2</Subscript>O<Subscript>2</Subscript>

The present study shows that hydroethidine (HE), used for in-vivo qualitative fluorescent detection of superoxide anion, can be also oxidized by H₂O₂ via non-specific peroxidase (horseradish peroxidase and myeloperoxidase) catalysis, forming fluorescent oxidation products. These products give broad excitation/emission peaks (490–495/580–600 nm) near the excitation/emission peaks (475/580 nm) of the HE-superoxide oxidation product, and this may pose serious interference problems to the fluorescent detection of the superoxide radical. The study suggests cautionary use of the HE-superoxide anion assay mainly for detection of reactive oxygen species. A byproduct of this study was the development of a simple and sensitive HE-horseradish peroxidase assay for the in-vitro quantification of H₂O₂ in biological tissues with a sensitivity of 1 mol L^–1.     

Synthesis and characterization of the [Ru<Subscript>3</Subscript>O(CH<Subscript>3</Subscript>COO)<Subscript>6</Subscript>(py)<Subscript>2</Subscript>(BPE)Ru(bpy)<Subscript>2</Subscript>Cl](PF<Subscript>6</Subscript>)<Subscript>2</Subscript> dimer

The polymetallic [Ru₃O(CH₃COO)₆(py)₂(BPE)Ru(bpy)₂Cl](PF₆)₂ complex (bpy = 2,2′-bipyridine, BPE = trans-1,2-bis(4-pyridil)ethylene and py = pyridine) was assembled by the combination of an electroactive [Ru₃O] moiety with a [Ru(bpy)₂(BPE)Cl] photoactive centre, and its structure was determined using positive ion electrospray (ESI-MS) and tandem mass (ESI-MS/MS) spectrometry. The [Ru₃O(CH₃COO)₆(py)₂(BPE)Ru(bpy)₂Cl]²⁺ doubly charged ion of m/z 732 was mass-selected and subject to 15 eV collision-induced dissociation, leading to a specific dissociation pattern, diagnostic of the complex structure. The electronic spectra display broad bands at 409, 491 and 692 nm ascribed to the [Ru(bpy)₂(BPE)] charge-transfer bands and to the [Ru₃O] internal cluster transitions. The cyclic voltammetry shows five reversible waves at −1.07 V, 0.13 V, 1.17 V, 2.91 V and −1.29 V (vs SHE) assigned to the [Ru₃O]^{−1/0/+1/+2/+3} and to the bpy^0/−1 redox processes; also a wave is observed at 0.96 V, assigned to the Ru^+2/+3 pair. Despite the conjugated BPE bridge, the electrochemical and spectroelectrochemical results indicate only a weak coupling through the π-system, and preliminary photophysical essays showed the compound decomposes under visible light irradiation.     

Density functional theoretical study on attachment sites of Mg<Superscript>2+</Superscript> and Ca<Superscript>2+</Superscript> and metal ion affinity to Crenulatin molecule

Crenulatin (C₂₅H₂₀O₁₀) is a flavonol derivative and has been isolated from the roots of Rhodiola crenulata (Hook. F. et Thoms.), a widely used medicinal herb. Magnesium and calcium cations play an important physiological role in biological systems. In this work, interactions of magnesium and calcium divalent cations with Crenulatin molecule were studied. Density functional theory (DFT) was used to determine coordination geometries and absolute metal ion affinities (MIA) for all possible stable complexes. The results show that calcium and magnesium cations are able to interact with the Crenulatin molecule through mono-, bi-, and tricoordination. B3LYP/6-31G(d) bond energies for all complexes reveal that magnesium cation has a greater affinity to Crenulatin molecule than calcium cation. The calculated value of Mg²⁺ cation affinity, including the zero-point vibrational energy (ZPE) and basis set superposition error (BSSE), is 231.8 kcal mol⁻¹ for the most stable complex. Entropy (ΔS) and free energy (ΔG) variations for the metalation processes considered here have also been reported. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Second Dissociation Constant of H<Subscript>2</Subscript>Te and the Absorption Spectra of HTe<Superscript>–</Superscript>, Te<Superscript>2–</Superscript> and Te<Subscript>2</Subscript><Superscript>2–</Superscript> in Aqueous Solution

We have measured the second acid dissociation constant, K _2a , at several ionic strengths for hydrogen telluride (H₂Te) using the Charge Transfer to Solvent (CTTS) uv spectra of its anions HTe⁻ and Te²⁻. Since it is produced in our solutions, we have also determined the spectra of Te₂ ²⁻ both in the uv and in the visible regions. At 25 ^∘C, K _2a = (1.28 ± 0.02) × 10⁻¹² by extrapolation to zero ionic strength. Its value at an ionic strength equal to 0.5 mol.dm^-3 was estimated to be (8.7 ± 0.2) × 10⁻¹². The solution thermodynamics of these species are also discussed and comparisons are made to related acids.     

Photochemical substitution of benzene in the iron cyclohexadienyl complex [(η<Superscript>5</Superscript>-C<Subscript>6</Subscript>H<Subscript>7</Subscript>)Fe(η-C<Subscript>6</Subscript>H<Subscript>6</Subscript>)]<Superscript>+</Superscript>

The visible light irradiation of the [(η⁵-C₆H₇)Fe(η-C₆H₆)]⁺ cation (1) in acetonitrile resulted in the substitution of the benzene ligand to form the labile acetonitrile species [(η⁵-C₆H₇)Fe(MeCN)₃]⁺ (2). The reaction of 1 with Bu^tNC in MeCN produced the stable isonitrile complex [(η⁵-C₆H₇)Fe(Bu^tNC)₃]⁺ (3). The photochemical reaction of cation 1 with pentaphosphaferrocene Cp*Fe(η-cyclo-P₅) afforded the triple-decker cation with the bridging pentaphospholyl ligand, [(η⁵-C₆H₇)Fe(μ-η:η-cyclo-P₅)FeCp*]⁺ (4). The latter complex was also synthesized by the reaction of cation 2 with Cp*Fe(η-cyclo-P₅). The structure of the complex [3]PF₆ was established by X-ray diffraction. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2088–2091, November, 2007.     

Gas phase structure of micro-hydrated [Mn(ClO<Subscript>4</Subscript>)]<Superscript>+</Superscript> and [Mn<Subscript>2</Subscript>(ClO<Subscript>4</Subscript>)<Subscript>3</Subscript>]<Superscript>+</Superscript> ions probed by infrared spectroscopy

Gas-phase infrared photodissociation spectroscopy is reported for the microsolvated [Mn(ClO₄)(H₂O) _n ]⁺ and [Mn₂(ClO₄)₃(H₂O) _n ]⁺ complexes from n = 2 to 5. Electrosprayed ions are isolated in an ion-trap where they are photodissociated. The 2600–3800 cm⁻¹ spectral region associated with the OH stretching mode is scanned with a relatively low-power infrared table-top laser, which is used in combination with a CO₂ laser to enhance the photofragmentation yield of these strongly bound ions. Hydrogen bonding is evidenced by a relatively broad band red-shifted from the free OH region. Band assignment based on quantum chemical calculations suggest that there is formation of water—perchlorate hydrogen bond within the first coordination shell of high-spin Mn(II). Although the observed spectral features are also compatible with the formation of structures with double-acceptor water in the second shell, these structures are found relatively high in energy compared with structures with all water directly bound to manganese. Using the highly intense IR beam of the free electron laser CLIO in the 800–1700 cm⁻¹, we were also able to characterize the coordination mode (η²) of perchlorate for two clusters. The comparison of experimental and calculated spectra suggests that the perchlorate Cl—O stretches are unexpectedly underestimated at the B3LYP level, while they are correctly described at the MP2 level allowing for spectral assignment.