Cationization of simple organic molecules by singly-charged Ag<Stack><Subscript>3</Subscript><Superscript>+</Superscript></Stack> cluster ions in matrix-assisted laser desorption/ionization mass spectrometry: Metal cluster-molecule interactions

It was found earlier that under matrix-assisted laser desorption/ionization (MALDI) conditions several organic compounds which produce adduct with silver ions, are also capable of forming adducts with Ag(3)(+) cluster ions under appropriate conditions. The Ag(3)(+) cluster ion can be in situ generated under the MALDI analysis conditions from silver trifluoroacetate cationization agent in the presence of organic MALDI matrices. In this article the fragmentation of a commercial plasticizer, a peracetylated isoflavone glycoside and a pyrazolylphenyl disulfide derivative cationized with silver ions and Ag(3)(+) cluster ions are compared. It was observed that the complexes of Ag(3)(+) are less fragmented than the corresponding adduct ions with Ag(+). The presumable fragmentation channel of [M + Ag(3)(+)] is the elimination of Ag(2) units from these complexes. No significant dissociation of [M + Ag(3)(+)], into M and Ag(3)(+) takes place, indicating a tight connection between the corresponding molecule and Ag(3)(+) cluster ion. However, with a compound carrying very labile groups, such as the pyrazolylphenyl disulfide derivative, intramolecular cleavages can occur prior to significant dissociation of the Ag(3)(+) cluster ion.     

Photoreduction of Ag<Superscript>+</Superscript> cations in a perfluorosulfonic membrane

The two-stage synthesis of nanosize silver in the pore space of a perfluorosulfonic membrane by ion-exchange fixation of Ag⁺ cations with the subsequent photoreduction in formaldehyde vapor was fulfilled. The study of the obtained composites shows that they contain silver “near-wall” form and nanoparticles weakly connected with the membrane surface.     

Stability of Ag<Superscript>+</Superscript> Complexes with Cryptand 222 in Ionic Liquids

Stability constants of silver(I) complexes with cryptand 222 were measured in a number of ionic liquids, applying potentiometric titration. The ionic liquids were based on 1-butyl-3-methylimidazolium, 1-ethyl-3-methylimidazolium, 1-butyl-1-methyl-pyrrolidinium and 1-methyl-1-propyl-pyrrolidinium cations, as well as on tetrafluoroborate, triflate and bis(trifluoromethane sulfonyl) imide. The stability constants, expressed in log K scale, were within the broad range of 8.4–17.2. The formation of the Ag⁺222 cryptates was not detected in ionic liquids based on halide anions. Free enthalpy of silver(I) transfer from dimethylsulfoxide as a reference molecular solvent to ionic liquids was calculated applying the cryptate assumption. The results were discussed in terms of the competition between silver(I) complexation by ion forming ionic liquid and its complexation by cryptand 222.in final form: 6 December 2004This revised version was published online in July 2005 with a corrected issue number.     

Subcellular mass determination by <Superscript>4</Superscript>He<Superscript>+</Superscript> energy-loss micro-spectrometry

The scanning transmission ion microscope (STIM) has been used to determine the intracellular mass of human cultured cells. A 4He+ microbeam of 2.0 MeV energy was chosen to obtain enhanced ion-energy-loss sensitivity through the micron-thick freeze-dried cells. Local sample mass calculation, based on energy-loss conversion by use of appropriate matrix stopping powers, was performed by use of dedicated software. The method was validated with epoxy resin sections and polymer foil as analogues of biological samples in the range of (intra)cellular thickness, 150 to 3000 nm. STIM analysis resulted in less than 5% error in mass determination. 4He+ energy-loss micro-spectrometry was performed on freeze-dried human ovarian cancer cells, the mean areal mass obtained was 120 microg cm(-2) (200 microg cm(-2) in the nucleus and 250 microg cm(-2) in nucleoli). This method is particularly useful for mass normalization of X-ray fluorescence yields resulting from particle-induced X-ray emission microanalysis (micro-PIXE). When performed successively these two ion-beam micro-analytical methods enable the mapping of true element concentrations within single cells.     

Mechanism of [M + H]<Superscript>+</Superscript> formation in photoionization mass spectrometry

In this paper we examine the mechanism of [M + H]+ (henceforth MH+) formation by direct photoionization. Based on comparisons of the relative abundance of M+ and MH+ ions for photoionization of a variety of compounds M as vapor in air versus in different solvents, we conclude that the mechanism is M + hnu --> M+ + e- followed by the reaction M+ + S --> MH+ + S(-H). The principal evidence for molecular radical ion formation M+ followed by hydrogen atom abstraction from protic solvent S are: (1) Nearly exclusive formation of M+ for headspace ionization of M in air, (2) significant relative abundance of MH+ in the presence of protic solvents (e.g., CH3OH, H2O, c-hexane), but not in aprotic solvents (e.g., CCl4-), (3) observation of induced equilibrium oscillations in the abundance of MH+ and M+, and (4) correlation of the ratio of MH+/M+ to reaction length in the photoionization source. Thermodynamic models are advanced that explain the qualitative dependence of the MH+/M+ equilibrium ratio on the properties of solvent S and analyte M. Though the hydrogen abstraction reaction is endothermic in most cases, it is shown that the equilibrium constant is still expected to be much greater than unity in most of the cases studied due to the very slow reverse reaction involving the very low abundant MH+ and S(-H) species.     

Conversion of Methane over Ag<Superscript>+</Superscript>-exchanged Zeolite in the Presence of Ethene

Methane is shown to react with ethene over silver-exchanged zeolites at around 673 K to form higher hydrocarbons. Methane conversion of 13.2% is achieved at 673 K over Ag–ZSM−5 catalyst. Under these conditions, H–ZSM−5 does not catalyze the methane conversion, only ethene being converted into higher hydrocarbons. Zeolites with extra-framework metal cations such as In and Ga also activate methane in the presence of ethene. Using ¹³C-labeled methane as a reactant, propene is shown to be a primary product from methane and ethane. ¹³C atoms were not found in benzene molecules produced, indicating that benzene is entirely originated from ethane. On the other hand, in toluene, ¹³C atoms are found in both the methyl group and the aromatic ring. This implies that toluene is formed by the reaction of propene with butenes formed by the dimerization of ethene, and also by the reaction of benzene with methane. The latter path was confirmed by direct reaction of ¹³CH₄ with benzene. In this case, ¹³C atoms are found only in methyl groups of toluene produced. The heterolytic dissociation of methane over Ag⁺-exchanged zeolites is proposed as a reaction mechanism for the catalytic conversion of methane, leading to the formation of silver hydride and CH₃^δ+ species, which reacts with ethene and benzene to form propene and toluene, respectively. The conversion of methane over zeolites loaded with metal cations other than Ag⁺ is also described. The reaction of methane with benzene over indium-loaded ZSM−5 afforded toluene and xylenes in yields of up to 7.6% and 0.9% at 623 K when the reaction was carried out in a flow reactor.     

Interaction energies of histidine with cations (H<Superscript>+</Superscript>, Li<Superscript>+</Superscript>, Na<Superscript>+</Superscript>, K<Superscript>+</Superscript>, Mg<Superscript>2+</Superscript>, Ca<Superscript>2+</Superscript>)

The imidazol side group of histidine has two nitrogen atoms capable of being protonated or participating in metal binding. Hence, histidine can take on various metal-bound and protonated forms in proteins. Because of its variable structural state, histidine often functions as a key amino acid residue in enzymatic reactions. Ab initio (HF and MP2) calculations were done in modeling the cation (H⁺, Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺) interaction with side chain of histidine. The region selectivity of metal ion complexation is controlled by the affinity of the side of attack. In the imidazol unite of histidine the ring nitrogen has much higher metal ion (as well as proton) affinity. The complexation energies with the model systems decrease in the following order: Mg²⁺ > Ca²⁺ > Li⁺ > Na⁺ > K⁺. The variation of the bond lengths and the extent of charge transfer upon complexation correlate well with the computed interaction energies.     

Determination of <Superscript>238</Superscript>Pu in plutonium bearing fuels by thermal ionization mass spectrometry

Determination of ²³⁸Pu in plutonium bearing fuels is required as a part of the chemical quality assurance of nuclear fuels. In addition, the determination of ²³⁸Pu is required in nuclear technology for many other applications, e.g., for developing isotope correlations and while using ²³⁸Pu as a spike (tracer) in isotope dilution α-spectrometry (IDAS). This determination usually involves the use of α-spectrometry on purified Pu sample. In view of the random errors associated with the counting statistics and the systematic errors due to (1) in-growth of ²⁴¹Am in purified Pu sample and (2) tail contribution correction methodology in α-spectrometry, the precision and accuracy obtainable by α-spectrometry are limited. Thermal ionization mass spectrometry (TIMS) is generally used for the determination of different Pu isotopes other than ²³⁸Pu. This is due to the ubiquitous isobaric interference from ²³⁸U at ²³⁸Pu in TIMS. Recently, we have carried out studies on the formation of atomic and oxide ions of U and Pu by TIMS and developed a novel approach using interfering element correction methodology to account for the isobaric interference of ²³⁸U at ²³⁸Pu in TIMS. This methodology is based on the addition of ²³⁵U (enrichment >90 atom%) to Pu sample followed by the determination of ²³⁸U/²³⁵U atom ratio using UO⁺ ion and determination of Pu isotope ratios using Pu⁺ ion, from the same filament loading. The TIMS methodology was used for the determination of ²³⁸Pu in different Pu samples in U based nuclear fuels from PHWRs with ²³⁸Pu content about 0.2 atom%. The ²³⁸Pu determination was also carried out using α-spectrometry. This paper reports the results obtained by the two methods and presents the ments and shortcomings of the two approaches.     

Preparation of Pt<Subscript>core</Subscript>Ag<Subscript>shell</Subscript> nanoparticles: Catalytic reduction of Ag<Superscript>+</Superscript> ions by hydrogen

It is shown that the saturation of an aqueous solution containing silver ions with hydrogen in the presence of 9.5-nm platinum nanoparticles leads to the reduction of silver and the formation of Pt_coreAg_shell bimetal nanoparticles. An increase in the concentration of silver ions gives rise to a number of elementary silver layers that cover the platinum core. It is established that the concentration of silver ions does not substantially affect the rate of the formation of a silver shell on the surface of platinum nanoparticles.     

UV-induced reduction of Ag<Superscript>+</Superscript> by diazene sulphonates: new method of metallisation of surfaces

The metallisation of surfaces would be technologically very simple if it were possible to use the properties of the substances that decompose upon UV irradiation and produce species with a strong redox potential. In this work, diazene sulphonates are presented as possible reducing agents for Ag⁺ in aqueous solutions and in thin solid layers. The photo-formation of Ag^m+_n clusters in the presence of diazene sulphonates in solutions was investigated via UV-VIS spectroscopy. Significant differences were observed in the electrical properties of surfaces after photo reduction; these occurred without any additional reducing agent.     

Photoreduction of Ag<Superscript>+</Superscript> ions and coalescence of silver nanoparticles in aqueous polyacrylate solutions

It is shown that changes in the spectral composition of irradiating light makes it possible to realize the competing photoreduction of Ag⁺ ions by polyacrylate anions in the bulk of an aqueous solution and on the surface of silver nanoparticles, which is accompanied by their coalescence.     

Synthesis,characterisation and photocatalytic activity of Ag<Superscript>+</Superscript>- and Sn<Superscript>2+</Superscript>-substituted KSbTeO<Subscript>6</Subscript>

Ag⁺- and Sn²⁺-substituted KSbTeO₆ were prepared by a facile ion-exchange method at ambient temperature. All the samples were characterised by scanning electron microscopy, energy-dispersive spectra, thermogravimetric analysis, powder X-ray diffraction, Raman spectra and UV-VIS diffuse reflectance spectra. Both Sn²⁺- and Ag⁺-substituted KSbTeO₆ were crystallised in a cubic lattice with the \(Fd\bar 3m\) space group. The band-gap energy of all the samples was deduced from their UV-VIS diffuse reflectance spectral profiles. The visible light-induced photocatalytic oxidation of the methylene blue (MB) dye was examined in the presence of all the as-prepared materials. The Ag⁺- and Sn²⁺-substituted KSbTeO₆ exhibited a higher photocatalytic activity than the parent KSbTeO₆ in degradation of the MB dye under visible light irradiation.     

Fast evaluation of <Superscript>235</Superscript>U/<Superscript>238</Superscript>U ratio in nuclear spent fuel safe guard by thermal ionization mass spectrometry by using refractory metal oxides

A direct simple and fast method was established, to overcome the influence of low and high level impurities on the measurement of ²³⁵U/²³⁸U isotopic ratio in nuclear spent fuel safeguard by thermal ionization mass spectrometry (TIMS), by using refractory metal oxide. The addition of refractory metal oxides forming solution (RMOFS), in certain proportions alongside with the spent fuel solution on the sample filaments were found to be useful during the analysis of uranium isotopic ratio by TIMS. RMOFS (with oxide melting point exceeding 2,000 °C), and particularly that of magnesium, were found to be very effective in improving the quality of the ion signal of ²³⁵U and ²³⁸U, when added without the need for prior purification. Solutions of chromium, cerium, thorium, and magnesium were investigated, to select the more convenient one, and it was found that magnesium was very useful to start with. The method was very simple, improve both the accuracy and precision of the collected data, reduce the time required to achieve steady uranium pilot signal, and hence the over all time of the analysis, regardless of the level of impurities present.     

Kinetics of solid-phase H<Superscript>+</Superscript>/M<Superscript>+</Superscript> ion exchange on hafnium hydrogen phosphate

The kinetics of solid-phase reactions between hafnium hydrogen phosphate and alkali metal chlorides were studied by thermogravimetry with subsequent analysis of leaving gases. For sodium and potassium chlorides, the reaction occurs in two stages; the first stages produces MHHf(PO₄)₂, and the second yields the MHf₂(PO₄)₃ NASICON phosphate. For rubidium chloride, the reaction is one stage and produces Rb₂Hf(PO₄)₂. For cesium chloride, the reaction is an analogue of the reaction for rubidium chloride, but has two stages. Kinetic data were used to determine interdiffusion coefficients for hydrogen and alkali-metal ions at various temperatures and the activation energies of interdiffusion.     

Transport of <Superscript>13</Superscript>C-oleate in adipocytes measured using multi imaging mass spectrometry

The mechanism of long chain free fatty acid (FFA) transport across cell membranes is under active investigation. Here we describe the use of multi imaging mass spectrometry (MIMS) to monitor intracellular concentrations of FFA and provide new insight into FFA transport in cultured adipocytes. Cells were incubated with 13C-oleate:BSA and either dried directly or dried after washing with a medium deprived of 13C-oleate:BSA. Cells were analyzed with MIMS using a scanning primary Cs+ ion beam and 12C-, 13C-, 12C14N-, 13C14N-) (or 12C 15N-) were imaged simultaneously. From these quantitative images the values of the 13C/ 12C ratios were determined in the intracellular lipid droplets, in the cytoplasm and outside the 3T3F442A adipocytes. The results indicate that after incubation with 13C-oleate:BSA the droplet 13C/ 12C ratio was 15 +/- 6%. This value is about 14-fold higher than the 13C/ 12C terrestrial ratio (1.12%). After washing the 13C-oleate:BSA, the droplet 13C/ 12C ratios decreased to 1.6 +/- 0.1%, about 40% greater than the natural abundance. Results for washed cells indicate that relatively little FFA was esterified. The unwashed cell results, together with the value of the lipid water partition coefficient, reveal that intracellular unbound FFA (FFAu) concentrations were on average about 4.5-fold greater than the extracellular FFAu concentrations. These results are consistent with the possibility that FFA may be pumped into adipocytes against their electro-chemical potential. This work demonstrates that MIMS can be used to image and quantitate stable isotope labeled fatty acid in intracellular lipid droplets.     

Accelerator mass spectrometry of <Superscript>129</Superscript>I: Technique and applications

Summary The advantages that accelerator mass spectrometry (AMS) provide for radiocarbon analysis, notably smaller sample sizes and shorter measurement times, also apply to the analysis of ¹²⁹I. In this paper, the requirements for a mass spectrometry system for measuring extremely low concentrations of rare atoms are discussed and these requirements are illustrated using the details of the AMS analysis of ¹²⁹I. As an example of an application of this AMS technology, a series of ¹²⁹I measurements, used to identify isolated events in which radioactivity has been atmospherically transported into the Arctic, is described. Such investigations could not be carried out without the small sample size capability of AMS analysis.     

Hydration of the H<Superscript>+</Superscript>, Li<Superscript>+</Superscript>, Na<Superscript>+</Superscript>, and Cs<Superscript>+</Superscript> ions in MF-4SK perfluorinated sulfonic acid cation-exchange membranes modified with inorganic dopants

The hydration, state, and mobility of protons and Li⁺, Na⁺, and Cs⁺ ions in MF-4SK perfluorinated sulfonic acid cation-exchange membranes doped with silicon dioxide and phosphotungstic acid have been investigated by NMR and impedance spectroscopy. The dopants increase the moisture content of the membrane and change the system of pores and channels in which ion transport takes place. At low humidities, the dopant particles are involved in ion transport. The greatest effect is observed for the membranes doped with both SiO₂ and phosphotungstic acid. The water molecules sorbed by dopant particles as a material participate in the hydration of alkali metal cations in the membrane.     

Selective ion-exchange sorption of K<Superscript>+</Superscript> from aqueous solutions containing Na<Superscript>+</Superscript>-K<Superscript>+</Superscript> mixture on Sn(IV) hydrophosphate

Ion-exchange sorption of K⁺ and Na⁺ from their mixture on X-ray-amorphous and crystalline Sn(IV) hydrophosphates was studied. These sorbents exhibit a high selectivity for K⁺. Amorphous Sn(IV) hydrophosphate can be used for efficient purification of aqueous sodium salt solutions to remove potassium impurity.Translated from Zhurnal Prikladnoi Khimii, Vol. 77, No. 8, 2004, pp. 1275–1278.Original Russian Text Copyright © 2004 by Smirnov, Dimova, Redchenko.     

Styrene oxide DNA adducts: quantitative determination using <Superscript>31</Superscript>P monitoring

The reaction of styrene oxide, a potential carcinogen in humans, with DNA constituents has been used to develop an improved method for quantification of DNA adducts. To enable monitoring of DNA adducts caused by xenobiotics at physiological relevant levels, a robust, reliable and powerful method based on monitoring of phosphorus in nucleotides is described. An efficient enzymatic digestion step and a sample-preconcentration procedure are essential, and enable separation of alkylated nucleotides from the large excess of native nucleotides. The adducts are detected by means of the phosphorus signal measured at mass m/z=31 with an inductively-coupled-plasma mass spectrometer. Bis(4-nitrophenyl)phosphate (BNPP) serves as internal standard for quantification of the adducts. The absolute limit of detection, 45 fmol, corresponds to detection of three modified nucleotides among 10⁷ native nucleotides (the calculation is based on use of 50 g calf thymus DNA). An adduct formation ratio at the DNA of 3.6 adducts per 1000 nucleotides was measured, which is 75% lower than for reaction with monomeric 2-deoxy-nucleotides. In addition, a substantial amount of phosphate adducts were detected, but in DNA the rate of phosphate formation was lower than with monomeric nucleotides. Most probably these adducts escaped unnoticed when ³¹P-post-labelling was employed.