Tantalum Oxide Nanoparticles for the Imaging of Articular Cartilage Using X‐Ray Computed Tomography: Visualization of Ex Vivo/In Vivo Murine Tibia and Ex Vivo Human Index Finger Cartilage

The synthesis and characterization of tantalum oxide (Ta₂O₅) nanoparticles (NPs) as new X‐ray contrast media for microcomputed tomography (μCT) imaging of articular cartilage are reported. NPs, approximately 5–10 nm in size, and possessing distinct surface charges, were synthesized using phosphonate (neutral), ammonium (cationic), and carboxylate (anionic) ligands as end functional groups. Assessment of a cartilage defect in a human cadaver distal metacarpophalangeal (MCP) joint with the ammonium nanoparticles showed good visualization of damage and preferential uptake in areas surrounding the defect. Finally, an optimized nontoxic cationic NP contrast agent was evaluated in an in vivo murine model and the cartilage was imaged. These nanoparticles represent a new type of contrast agent for imaging articular cartilage, and the results demonstrate the importance of surface charge in the design of nanoparticulate agents for targeting the surface or interior zones of articular cartilage.     

Organic Nanoplatforms for Iodinated Contrast Media in CT Imaging

X-ray computed tomography (CT) imaging can produce three-dimensional and high-resolution anatomical images without invasion, which is extremely useful for disease diagnosis in the clinic. However, its applications are still severely limited by the intrinsic drawbacks of contrast media (mainly iodinated water-soluble molecules), such as rapid clearance, serious toxicity, inefficient targetability and poor sensitivity. Due to their high biocompatibility, flexibility in preparation and modification and simplicity for drug loading, organic nanoparticles (NPs), including liposomes, nanoemulsions, micelles, polymersomes, dendrimers, polymer conjugates and polymeric particles, have demonstrated tremendous potential for use in the efficient delivery of iodinated contrast media (ICMs). Herein, we comprehensively summarized the strategies and applications of organic NPs, especially polymer-based NPs, for the delivery of ICMs in CT imaging. We mainly focused on the use of polymeric nanoplatforms to prolong circulation time, reduce toxicity and enhance the targetability of ICMs. The emergence of some new technologies, such as theragnostic NPs and multimodal imaging and their clinical translations, are also discussed.     

Engineered biocompatible nanoparticles for in vivo imaging applications

Iron-platinum alloy nanoparticles (FePt NPs) are extremely promising candidates for the next generation of contrast agents for magnetic resonance (MR) diagnostic imaging and MR-guided interventions, including hyperthermic ablation of solid cancers. FePt has high Curie temperature, saturation magnetic moment, magneto-crystalline anisotropy, and chemical stability. We describe the synthesis and characterization of a family of biocompatible FePt NPs suitable for biomedical applications, showing and discussing that FePt NPs can exhibit low cytotoxicity. The importance of engineering the interface of strongly magnetic NPs using a coating allowing free aqueous permeation is demonstrated to be an essential parameter in the design of new generations of diagnostic and therapeutic MRI contrast agents. We report effective cell internalization of FePt NPs and demonstrate that they can be used for cellular imaging and in vivo MRI applications. This opens the way for several future applications of FePt NPs, including regenerative medicine and stem cell therapy in addition to enhanced MR diagnostic imaging.     

Gold-Speckled SPION@SiO2 Nanoparticles Decorated with Thiocarbohydrates for ASGPR1 Targeting: Towards HCC Dual Mode Imaging Potential Applications

Efforts are made to perform an early and accurate detection of hepatocellular carcinoma (HCC) by simultaneous exploiting multiple clinically non-invasive imaging modalities. Original nanostructures derived from the combination of different inorganic domains can be used as efficient contrast agents in multimodal imaging. Superparamagnetic iron oxide nanoparticles (SPIONs) and Au nanoparticles (NPs) possess well-established contrasting features in magnetic resonance imaging (MRI) and X-ray computed tomography (CT), respectively. HCC can be targeted by using specific carbohydrates able to recognize asialoglycoprotein receptor 1 (ASGPR1) overexpressed in hepatocytes. Here, two different thiocarbohydrate ligands were purposely designed and alternatively conjugated to the surface of Au-speckled silica-coated SPIONs NPs, to achieve two original nanostructures that could be potentially used for dual mode targeted imaging of HCC. The results indicated that the two thiocarbohydrate decorated nanostructures possess convenient plasmonic/superparamagnetic properties, well-controlled size and morphology and good selectivity for targeting ASGPR1 receptor.     

Synthesis and bio-functionalization of magnetic nanoparticles for medical diagnosis and treatment

The synthesis of multifunctional magnetic nanoparticles (NPs) is a highly active area of current research located at the interface between materials science, biotechnology and medicine. By virtue of their unique physical properties magnetic nanoparticles are emerging as a new class of diagnostic probes for multimodal tracking and as contrast agents for MRI. Furthermore, they show great potential as carriers for targeted drug and gene delivery, since reactive agents, such as drug molecules or large biomolecules (including genes and antibodies), can easily be attached to their surface. On the other hand, the fate of the nanoparticles inside the body is mainly determined by the interactions with its local environment. These interactions strongly depend upon the size of the magnetic NPs but also on the individual surface characteristics, like charge, morphology and surface chemistry. This review not only summarizes the most common synthetic approaches for the generation of magnetic NPs, it also focuses on different surface modification strategies that are used today to enhance the biocompatibility of these NPs. Finally, key considerations for the application of magnetic NPs in biomedicine, as well as various examples for the utilization in multimodal imaging and targeted gene delivery are presented.     

Polymer materials for constructing therapeutical nanoparticles in photothermal therapy

Photothermal therapy (PTT) ablates tumors by thermal effects of photothermal agents (PTAs), and attracts wide attention due to the non-invasive characteristic. The ideal PTAs are expected to have high photothermal conversion effect under NIR irradiation, as well as targeting abilities and good biocompatibility satisfying the need of application in vivo. Nanoparticles (NPs) are commonly used as anti-tumor materials, and plenty of researches on therapeutical NPs for PTT treatment have been developed. Among various building blocks for photothermal NPs, polymer materials for biomedical applications have great advantages due to their negligible toxicity, flexibility for functional modification, and ability to integrate multiple therapeutic strategies. This review focuses on the polymer materials utilized in photothermal NP designing, including their application as excellent carriers and powerful PTAs with great PTT effects. Furthermore, the synergy therapy based on polymeric nanoplatform for enhancing PTT therapeutic efficiency will be introduced.     

Paramagnetic nanoparticle T(1) and T(2) MRI contrast agents

There is no doubt that magnetic resonance imaging contrast agents (MRI CAs) can play a vital role in diagnosing diseases. Therefore, demand for new MRI CAs with an enhanced sensitivity and advanced functionalities is very high. Here, paramagnetic nanoparticles (NPs) are reviewed as new potential candidates for either T(1) or T(2) MRI CAs or both. These include surface coated lanthanide (Ln) oxide NPs (Ln = Gd, Dy, and Ho) and manganese oxide NPs. Surface coating materials should be biocompatible and hydrophilic. Compared to conventional large NPs, these surface coated paramagnetic NPs can be made ultrasmall with core particle diameter ranging from 1 to 3 nm, but their magnetic properties are still sufficient for MRI CAs. At this particle diameter, they can be easily excreted from the body through the renal system, which is prerequisite for in vivo applications. Mixed lanthanide oxide NPs into which a fluorescent Ln material is incorporated will be valuable as multiple imaging agents for both MRI-fluorescent imaging (FI) and MRI-cellular imaging (CL). These paramagnetic NPs can be further functionalized towards target-specific imaging, multiplex imaging, and drug delivery.     

Direct Assembly of Metal-Phenolic Network Nanoparticles for Biomedical Applications

Coordination assembly offers a versatile means to developing advanced materials for various applications. However, current strategies for assembling metal-organic networks into nanoparticles (NPs) often face challenges such as the use of toxic organic solvents, cytotoxicity because of synthetic organic ligands, and complex synthesis procedures. Herein, we directly assemble metal-organic networks into NPs using metal ions and polyphenols (i.e., metal-phenolic networks (MPNs)) in aqueous solutions without templating or seeding agents. We demonstrate the role of buffers (e.g., phosphate buffer) in governing NP formation and the engineering of the NP physicochemical properties (e.g., tunable sizes from 50 to 270 nm) by altering the assembly conditions. A library of MPN NPs is prepared using natural polyphenols and various metal ions. Diverse functional cargos, including anticancer drugs and proteins with different molecular weights and isoelectric points, are readily loaded within the NPs for various applications (e.g., biocatalysis, therapeutic delivery) by direct mixing, without surface modification, owing to the strong affinity of polyphenols to various guest molecules. This study provides insights into the assembly mechanism of metal-organic complexes into NPs and offers a simple strategy to engineer nanosized materials with desired properties for diverse biotechnological applications.     

Imaging the cellular uptake of tiopronin-modified gold nanoparticles

Well-dispersed gold nanoparticles (NP) coated with tiopronin were synthesized by X-ray irradiation without reducing agents. High-resolution transmission electron microscopy shows that the average core diameters of the NPs can be systematically controlled by adjusting the tiopronin to Au mole ratio in the reaction. Three methods were used to study the NP uptake by cells: quantitative measurements by inductively coupled plasma mass spectrometry, direct imaging with high lateral resolution transmission electron microscopy and transmission X-ray microscopy. The results confirmed that the NP internalization mostly occurred via endocytosis and concerned the cytoplasm. The particles, in spite of their small sizes, were not found to arrive inside the cell nuclei. The synthesis without reducing agents and solvents increased the biocompatibility as required for potential applications in analysis and biomedicine in general.     

Mechanism of Proton Relaxation for Enzyme‐Manipulated,Multicomponent Gold–Magnetic Nanoparticle Chains

Longitudinal and transverse relaxation times of multicomponent nanoparticle (NP) chains are investigated for their potential use as multifunctional imaging agents in magnetic resonance imaging (MRI). Gold NPs (ca. 5 nm) are arranged linearly along double‐stranded DNA, creating gold NP chains. After cutting gold NP chains with restriction enzymes (EcoRI or BamHI), multicomponent NP chains are formed through a ligation reaction with enzyme‐cut, superparamagnetic NP chains. We evaluate the changes in relaxation times for different constructs of gold–iron oxide NP chains and gold–cobalt iron oxide NP chains using 300 MHz ¹H NMR. In addition, the mechanism of proton relaxation for multicomponent NP chains is examined. The results indicate that relaxation times are dependent on the one‐dimensional structure and the amount of superparamagnetic NP chains present in the multicomponent constructs. Multicomponent NP chains arranged on double‐stranded DNA provide a feasible method for fabrication of multifunctional imaging agents that improve relaxation times effectively for MRI applications.     

The unique role of nanoparticles in nanomedicine: imaging, drug delivery and therapy

This critical review will present the role of nanoparticles (NPs) in the directions that are vital to the new field of nanomedicine, including imaging and drug delivery. We reflect on the physical properties that make NPs advantageous for in vivo efficacy, and review recent advances in major NP based biomedical applications. Critical questions of transport, uptake, and clearance will be discussed and illustrated through the success and opportunities of NP imaging and therapy on a photodynamic therapy (PDT) based NP system that has been developed in our lab over the past decade (540 references).     

Organic surface modification and analysis of titania nanoparticles for self-assembly in multiple layers

The characteristics of TiO₂ coatings can greatly influence their final performance in large-scale applications. In the present study, self-assembly of TiO₂ nanoparticles (NPs) in multiple layers was selected as a deposition procedure on various substrates. For this, the main prerequisite constitutes the surface modification of both NPs and substrate with, for example, silane coupling agents. A set of functionalized TiO₂ NPs has been produced by reaction with either (3-aminopropyl)triethoxysilane (APTES) or (3-aminopropyl)phosphonic acid (APPA) to functionalize the NP surface with free amino-groups. Then, the complementary functionalized NP set can be obtained from an aliquot of the first one, through the conversion of free surface amino groups to aldehydes by reaction with glutaraldehyde (GA). Several types of TiO₂ NPs differing in size, shape, and specific surface area have been functionalized. Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), SEM/ energy-dispersive X-ray spectroscopy (EDS), XPS, Auger electron spectroscopy (AES), and Time-of-Flight (ToF)-SIMS analyses have been carried out to evaluate the degree of functionalization, all the analytical methods employed demonstrating successful functionalization of TiO₂ NP surface with APTES or APPA and GA.     

Synthesis, characterization, and self-assembly of protein lysozyme monolayer-stabilized gold nanoparticles

Lysozyme monolayer-protected gold nanoparticles (Au NPs) which are hydrophilic and biocompatible and show excellent colloidal stability (at low temperature, ca. 4 degrees C), were synthesized in aqueous medium by chemical reduction of HAuCl4 with NaBH4 in the presence of a familiar small enzyme, lysozyme. UV-vis spectra, transmission electron microscopy (TEM), atomic force microscopy, and X-ray photoelectron spectroscopy characterization of the as-prepared nanoparticles revealed the formation of well-dispersed Au NPs of ca. 2 nm diameter. Moreover, the color change of the Au NP solution as well as UV-vis spectroscopy and TEM measurements have also demonstrated the occurrence of Ostwald ripening of the nanoparticles at low temperature. Further characterization with Fourier transform infrared spectroscopy (FTIR) and dynamic light scattering indicated the formation of a monolayer of lysozyme molecules on the particle surface. FTIR data also indicated the intactness of the protein molecules coated on Au NPs. All the characterization results showed that the monodisperse Au NPs are well-coated directly with lysozyme. Driven by the dipole-dipole attraction, the protein-stabilized Au NPs self-assembled into network structures and nanowires upon aging under ambient temperature. On the basis of their excellent colloidal stability, controlled self-assembly ability, and biocompatible surface, the lysozyme monolayer-stabilized Au NPs hold great promise for being used in nanoscience and biomedical applications.     

Tailoring block copolymer and polymer blend morphology using nanoparticle surfactants

Combining the functionality of nanoparticles (NPs) with the processability of polymers offers great promise for designing novel materials. In particular, NPs with tailored surface properties can effectively modify the interface between two distinct fluids and/or different polymer matrices which allows them to function as efficient surfactants. The efficiency of NP surfactants is strongly affected by their size and shape, which influences their adsorption energy to the interface, and the entropic contribution to the system. In this review, the assembly of size- and shape-controlled inorganic NPs at the interface of block copolymers (BCPs) and polymer blends has been focused. First, we discuss the design of size- and shape-controlled NP surfactants and we review the examples of NP surfactant-driven BCPs and polymer blend morphologies. In addition, we review the recent investigations of the morphological transition of BCP emulsion particles induced by NP surfactants. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016, 54, 228–237     

A review on the therapeutic applications of aptamers and aptamer-conjugated nanoparticles in cancer,inflammatory and viral diseases

The advancement in early diagnosis and precise treatments options result in more predictable and powerful health care modalities. Aptamers are known as nucleic acid structures with three-dimensional conformation to selectively bind a target site. Physicochemical properties of aptamers, their conjugation with nanoparticles (NPs) in theranostics applications and their internalization have been found to be of interest in development of aptamer-based drug delivery systems. Therefore, we aimed to present an overview on the structure and generation of aptamers followed by advantages of aptamers-conjugated NPs and their theranostics applications in various diseases such as oncology, inflammatory diseases and viral diseases. Afterward, we discussed several reports on the internalization approaches of aptamers, efficiency of aptamers vs. their analogous, and implications of aptamers in clinical trials. Finally, we discussed the current challenges and future perspectives of actively targeted aptamers for clinical application. In conclusion, this review may hold a great promise for development of aptamer-based therapeutic platforms in clinical trials.     

Polymer microgels: reactors for semiconductor, metal, and magnetic nanoparticles

We report a strategy for the production of materials with structural hierarchy. The approach employs polymer microgels as templates for the synthesis of semiconductor, metal, or magnetic nanoparticles (NPs). We show that NPs with predetermined dimensions and size-dependent properties can be synthesized by using a very delicate balance between the reaction conditions, the composition and the structure of microgel templates, and the concentration of NPs in the microgel. Postheat treatment of microgels doped with semiconductor nanoparticles reduces NP polydispersity and allows control of their photoluminescence. Microgel templates are particularly beneficial in the synthesis of polymer microspheres heavily loaded with monodisperse superparamagnetic Fe(3)O(4) NPs. Hybrid submicrometer-size microgels have promising potential applications in photonics, catalysis, and separation technologies.     

激活型有机光声造影剂的应用

光声(PA)成像作为一种结合了光学和声学成像优势的新型成像方式,具有深层组织穿透和高空间分辨率等优点,在重大疾病的早期影像诊断方面有着巨大的应用前景.然而传统的PA造影剂依然存在信噪比低、选择性及特异性差等不足,容易产生假阳性诊断结果.激活型PA造影剂可以有效的降低背景噪声,并提升成像的灵敏度和特异性,是目前PA造影剂...     

Ultrasensitive detection and molecular imaging with magnetic nanoparticles

Recent advances in nanotechnology have produced a variety of nanoparticles ranging from semiconductor quantum dots (QDs), magnetic nanoparticles (MNPs), metallic nanoparticles, to polymeric nanoparticles. Their unique electronic, magnetic, and optical properties have enabled a broad spectrum of biomedical applications such as ultrasensitive detection, medical imaging, and specific therapeutics. MNPs made from iron oxide, in particular, have attracted extensive interest and have already been used in clinical studies owing to their capability of deep-tissue imaging, non-immunogenesis, and low toxicity. In this Research Highlight article, we attempt to highlight the recent breakthroughs in MNP synthesis based on a non-hydrolytic approach, nanoparticle (NP) surface engineering, their unique structural and magnetic properties, and current applications in ultrasensitive detection and imaging with a special focus on innovative bioassays. We will also discuss our perspectives on future research directions.     

Using selenium-conjugated polyethylene glycol to enhance the stability of gold nanoparticles in biologically relevant samples

Using stabilizing agents to maintain the physicochemical properties of colloids in complex environments is crucial for their realworld applications. In this article, we describe how selenium-(Se-) terminated polyethylene glycol(PEG) can serve as a highaffinity stabilizing agent for gold nanoparticles(AuNPs). Compared to Au NPs modified with standard thiolated PEG(S-PEG),Se-PEG-coated Au NPs are much more stable under extreme conditions such as high/low pH, high salt content, and high temperatures. We demonstrate that the Se anchor can prevent the dissociation of PEG ligands from Au NP surfaces in living cells,where a higher concentration of biothiols is usually present. These results indicate that Se-PEG is an excellent stabilizing agent that may facilitate further studies on metal NPs for various complex and physiological systems.