Effect of the electrode material on the oxygen reduction at the nonstoichiometric lanthanum fluoride/electrode interface

The voltammetry method with a linear potential scan is used for investigating the effect the electrode material (Ni, Co, electrodes on the basis of cobalt oxides modified with carbon) exerts on the reduction of gaseous oxygen at interfaces solid fluoride-conducting electrode LaF₃:Eu²⁺/electrode, O₂, and conjugated processes. Properties of the modified electrodes are characterized by the impedance spectroscopy, scanning electron microscopy, and x-ray photoelectron spectroscopy methods. The oxygen reaction is irreversible at the LaF₃:Eu²⁺|Ni (or Co) interfaces. At the interface of LaF₃:Eu²⁺ with modified electrodes Co (C n at %), where n = 5 and 9, mobile forms of oxygen are reversible and the reduction of gaseous and chemisorbed oxygen is controlled by diffusion with different effective kinetic parameters.     

Galvanostatic investigation of electrochemical processes at the LaF<Subscript>3</Subscript>/M (M: Ag,Bi) interface

The electrochemical processes at the interface between solid fluorine-conducting electrolyte LaF₃(Eu²⁺ 0.8 mol %) and silver or bismuth electrodes in the two-electrode cell with nonpolarizable reference electrode are studied using the galvanostatic method. The anodic galvanostatic transients of LaF₃: Eu²⁺/Ag and LaF₃: Eu²⁺/Bi interfaces are linearized on the log(η ? η_max), vs. t coordinates, i.e. the rate of LaF₃|MF _n |M electrode formation is limited by slow surface diffusion of metal adions. The initial portions of cathodic galvanostatic transients in the range of solid-electrolyte lanthanum reduction are approximated by the linear dependence of η on log(1 ? √t/τ). The plots of logI vs. 1/η are linear both for the lanthanum reduction and for silver and bismuth oxidation involving mobile fluoride ion of solid electrolyte, which is typical for two-dimensional growth of new phase.     

Nonlinear Impedance of Liquid In–Ga Electrode in Aqueous Solutions of a Symmetrical Surface-Inactive Electrolyte

Experimental data related to the potential dependence of nonlinear characteristics of the electrical double layer at a liquid In–Ga electrode in aqueous solutions of a symmetrical surface-inactive electrolyte are obtained for the first time. It is shown that, as opposed to polycrystalline Cd and Pb electrodes, on a liquid (atomically smooth) In–Ga electrode, as on Hg, there is a clear intersection of the potential dependences of a nonlinear signal for different concentrations of a 1–1-valence surface-inactive electrolyte at one point. The intersection point exactly corresponds to the potential of zero charge of an electrode undistorted by specific adsorption of ions. It is established that, when estimating hydrophilicity of metals by a nonlinear impedance method, most information is provided by the region of average negative charges, rather than by the region near zero charge. It is shown that, as opposed to a linear impedance method, the nonlinear impedance method makes it possible to determine, directly from experiment, quantities that directly characterize the metal–solvent chemisorption interaction in a pure form; at the same time, these quantities are criteria of lyophilic nature of metals. Quantities that characterize the metal–solvent chemisorption interaction, obtained by the linear and nonlinear impedance methods are in good agreement, which confirms the validity of the approach we proposed earlier for separating the difference between reciprocal capacitances of the inner part of the electrical double layer on Hg and metal M, ^Hg _M C ^-1 _i= 1/C ^Hg _i– 1/C ^M _iinto physical (^Hg _M C ^–1)_physand chemical constituents. This coincidence also confirms correctness of numerical values obtained earlier for quantities (^Hg _M C ^–1)_phys.     

Electrochemical Behavior of the LaF3:Eu2+/Me Interface (Me = Sm,Ce, Gd,V, Ag)

The electrochemical behavior of the LaF₃ : Eu²⁺| interface (Me = Sm, Ce, Gd, V, Ag) is studied using stripping voltammetry. Current–voltage curves for cells Ag, AgCl|KCl and KF|LaF₃ : Eu²⁺|Sm (or Ce) may be viewed as background curves for analyzing solid-phase reactions with other metallic electrodes. The substrate material is found to affect properties of interfaces LaF₃ : Eu²⁺/Gd (or V), which are characterized either by solid-phase reactions involving the fluoride ion of a solid electrolyte or by reactions involving oxygen. Regularities, obtained for silver in contact with LaF₃ : Eu²⁺, link electrochemical signals of the reaction of the silver fluoride formation with the contact area.     

Synthesis and spectral characteristics of Sr2Y8(SiO4)6O2: Eu polycrystals

Spectral-luminescent characteristics of Sr₂Y₈(SiO₄)₆O₂: Eu powder crystal phosphor with the apatite structure and high-intensity luminescence of Eu³⁺ ions have been studied. The charge state of europium in the samples has been characterized by means of X-ray L₃-adsorption spectroscopy. It was established that Eu³⁺ forms two types of optical centers. Besides, luminescence of Eu²⁺ions was found. Reduction Eu³⁺→Eu²⁺ was considered, which may be due to vacancy formation in the 4f crystal lattice position and to negative charge transfer by this vacancy to two ions. Thus, in the silicate lattice there exist inhomogeneously distributed oxygen-deficient centers, which are responsible for nonradiative transfer of excitation energy to Eu³⁺ and Eu²⁺ ions. To study electron-vibrational interactions in the crystal phosphor samples, their IR and Raman spectra were examined. In the luminescence spectrum of Eu²⁺, a series of low-intensity bands caused by interaction of the 4f⁶5d state of Eu²⁺ with silicate lattice vibrations was observed.     

Excitation-dependent variation in local symmetry in Ba2Mg(BO3)2 evidenced by Eu3+ luminescent structural probe

Eu³⁺ luminescence was studied in Ba₂Mg(BO₃)₂ by selectively substituting at Mg site. The parent host Ba₂Mg(BO₃)₂ and Ba₂Mg_0.9Eu_0.05Li_0.05(BO₃)₂ were synthesized by conventional solid state reaction method. Their isostructural nature was confirmed using powder X-ray diffraction technique. The photoluminescence excitation spectrum of Eu³⁺ exhibited a broad Eu³⁺O²⁻ charge transfer band with a maximum at 253 nm along with other excitation transitions. The emission characteristics of Eu³⁺ were found to be excitation wavelength-dependent. The equally intense magnetic and electric dipole transitions for excitation under longer wavelengths showed the presence of Eu³⁺ at a site with non-inversion symmetry. Excitation using 253 nm resulted in the predominant magnetic dipole transition revealing Eu³⁺ at a site with inversion symmetry. The difference in the relative intensities of magnetic and electric dipole transitions originates from the change in symmetry around Eu³⁺ in Ba₂Mg(BO₃)₂ under different excitations.     

Electrical Double Layer on Liquid Bi–Ga Alloys in Aqueous Solutions

Double-layer characteristics of a liquid bismuth–gallium electrode are studied in aqueous electrolyte solutions. Based on the results obtained it is shown that Bi in an alloy with Ga is a surface-active component and forced out to the electrode surface layer. For electrode charges q –5 C/cm², the double layer characteristics of Bi–Ga electrodes approach those of a bismuth electrode. Thus, with respect to its electrochemical properties, a Bi–Ga electrode containing 0.25 at. % Bi simulates a liquid bismuth electrode. The corrected electrochemical work function is determined for bismuth. The close values of the difference of zero-charge potentials on mercury and bismuth in water and the difference of corrected electrochemical work functions for these metals points to the very low hydrophilicity of the Bi–Ga electrode, which approaches the value for mercury at negative electrode potentials. Taking into account that the Bi–Ga electrode displays no semimetallic properties, the similarity of the electric double layer (EDL) parameters for the Bi–Ga alloy and solid pure Bi indicates that the semimetallic properties of bismuth make no contribution to the EDL characteristics of the alloy in the studied range of negative charges q –5 C/cm².     

Electrochemical Properties of Hydroxyphenazine-Coated Electrodes

Glassy carbon and gold electrodes were coated with 1-hydroxyphenazine, and the electrochemical properties of these electrodes were tested using them as a rotating disc electrode to reduce Ru (bipy)₃³⁺, Fe³⁺, quinoxaline, O₂, and to oxidize Eu²⁺. The fixed redox couple can be reversibly reduced and oxidized, and acts as an intermediate medium for the electron transfer. For example the Ru(bipy)₃³⁺ (E_1/2= 1010 mV vs. SCE. (saturated calomel electrode) on a glassy carbon electrode in 1M H₂SO₄) is only reduced at 50 mV, whereas the oxidation of Eu²⁺ (E_1/2= ?460 mV vs. SCE. on a Hg-electrode in 1M HCl) takes place at ? 100 mV. The heterogeneous rate constant depends on the second order reaction between the attached coating and the redox couple in solution. Depending on this rate constant, selectivity of the electrode is observed.     

Redox Potentials of Samarium and Europium in Molten Cesium Chloride

The method of direct potentiometry was applied to measure redox potentials of Sm^{3 +}/Sm^{2 +} and Eu^{3 +}/Eu^{2 +} in molten cesium chloride relative to chlorine reference electrode in the temperature range 973-1173 K. Changes in the Gibbs energy of the redox reaction LnCl₂(l) + 1/2Cl₂(g) LnCl₃(l) were calculated.     

The kinetics of electroreduction of europium(III) cations at bismuth single-crystal electrode

Electroreduction of Eu(ClO₄)₃ and Eu₂(SO₄)₃ has been studied at electrochemically polished \textBi( 01[`1] ) {\text{Bi}}\left( {01\bar{1}} \right) single-crystal electrode in an acidic HClO₄ or H₂SO₄ (pH ~3) aqueous solution with LiClO₄ or Na₂SO₄ additions as a surface inactive electrolyte. The Eu³⁺ cations electroreduction rate depends on the electrode potential applied and the concentration of the supporting electrolyte as well as the concentration of the Eu³⁺ ions. At the more negative electrode potentials than the zero charge potential (zcp), the diffusion current plateaus were observed. The values of the rate constant for the heterogeneous reaction calculated at zcp are independent of the base electrolyte concentration studied. Analysis of the kinetic data corrected for the electrical double-layer effect shows that the coincidence of the corrected Tafel plots can be achieved, assuming that the effective charge of a reactant (+1.6) is significantly lower than it would be expected (z _A = +3).     

Emission from the working and counter electrodes under co-reactant electrochemiluminescence conditions

We present a new approach to explore the potential-dependent multi-colour co-reactant electrochemiluminescence (ECL) from multiple luminophores. The potentials at both the working and counter electrodes, the current between these electrodes, and the emission over cyclic voltammetric scans were simultaneously measured for the ECL reaction of Ir(ppy)₃ and either [Ru(bpy)₃]²⁺ or [Ir(df-ppy)₂(ptb)]⁺, with tri-n-propylamine as the co-reactant. The counter electrode potential was monitored by adding a differential electrometer module to the potentiostat. Plotting the data against the applied working electrode potential and against time provided complementary depictions of their relationships. Photographs of the ECL at the surface of the two electrodes were taken to confirm the source of the emissions. This provided a new understanding of these multifaceted ECL systems, including the nature of the counter electrode potential and the possibility of eliciting ECL at this electrode, a mechanism-based rationalisation of the interactions of different metal-complex luminophores, and a previously unknown ECL pathway for the Ir(ppy)₃ complex at negative potentials that was observed even in the absence of the co-reactant.

Exploration of potential-dependent, multi-colour co-reactant electrochemiluminescence from multiple luminophores at the working and counter electrodes reveals new pathways to emission.     

Electrochemical behavior of europium perovskites (Ca<Subscript>0.6</Subscript>Eu<Subscript>0.4</Subscript>MnO<Subscript>3</Subscript>) in alkaline aqueous media

In this paper, the electrochemical behavior of europium perovskites (Ca_0.6Eu_0.4MnO₃) prepared by a gel combustion method followed by a thermal treatment performed at 1073 and 1473 K is compared with the pristine oxide CaMnO₃ (T = 1073 K) obtained by the same method. The experiments were performed in alkaline aqueous media via open-circuit potential, cyclic voltammetry, chronopotentiometry, and impedance spectroscopy. The data show that the electrode roughness is inversely proportional to the oxide particle size. The chronopotentiometric curves show also that the presence of europium is advantageous due to the increase of the electrode roughness for the oxides formed at the same temperature (1073 K) or by increasing the charge per unit area for the oxide formed at 1473 K. The impedance spectra, which were obtained in the capacitive behavior domain, reflect the porous morphology of the electrode surfaces according to the theory developed by Levie. This feature is particularly evident for the electrodes with an average particle diameter of 90 and 60 nm, corresponding respectively to the oxides CaMnO₃ and Ca_0.6Eu_0.4MnO₃, both formed at 1073 K.     

The Electrical Double Layer at the Bi–Ga Liquid Alloy in the Acetonitrile Electrolyte Solutions

The electrical double layer (EDL) characteristics of a Bi (0.25 at. %)–Ga liquid electrode in acetonitrile are studied. In acetonitrile, as in water, the electrode models Bi electrodes in their electrochemical properties. In contrast to aqueous solutions, in acetonitrile solutions it is possible to study the EDL structure not only at negative charges but also near the zero charge and at small positive charges. In acetonitrile, the electrode's potential of zero charge not distorted by specific ion adsorption and the corrected electrochemical work function are determined. The electrode is as lyophilic with respect to acetonitrile as Hg. Thus, the orientation of acetonitrile dipoles on Hg and Bi is identical at negative charges. The obtained data and data for a partially fused polycrystalline electrode in aqueous solutions are used to determine contributions of semimetal properties of a Bi electrode to the capacitance of the inner part of EDL and to a potential drop. The charge dependences of these contributions are found.     

Gas diffusion hindrances on Ni cermet anode in contact with Zr<Subscript>0.84</Subscript>Y<Subscript>0.16</Subscript>O<Subscript>1.92</Subscript> solid electrolyte

The electrochemical behavior of Ni cermet electrode with CeO_{2 ? x} additive in contact with YSZ electrode was studied by means of impedance spectroscopy in H₂, H₂O, CO₂, CO, He, and Ar gas media of various composition within the temperature range of 700 to 950°C. Near the equilibrium potential, the electrochemical impedance spectra of the studied electrodes indicate to three stages of electrode reaction. The polarization conductivity of the low-frequency stage of electrode reaction (σ_lf) is characterized with the following regularities: (a) temperature dependence of σ_lf has a positive slope in Arrhenius coordinates; (b) σ_lf increases upon replacement of gas mixture with lower mutual diffusion coefficient by mixture with higher mutual diffusion coefficient, while polarization conductivity values of other stages remain practically invariable; (c) concentration relationships of 1/σ_lfrecorded for constant activity of oxygen in the gas phase are linear in the 1/σ_lf vs. 1/P _{CO 2} (P _CO) coordinates; (d) no low-frequency stage of the electrode reaction is observed upon electrochemical inflow (outflow) of the gas reagents (reaction products) to (from) the test electrodes (current passing through closely pressed specimens and central specimen impedance measurement); and (e) no change in the gas flow rate affects σ_lf value. The observed regularities were explained by assuming the gas diffusion nature of the low-frequency stage of the electrode reaction. The gas diffusion layer thickness was estimated.     

Thick-film electrodes for measurement of superoxide and hydrogen peroxide based on direct protein–electrode contacts

Cytochrome c was immobilized on screen-printed thick-film gold electrodes by a self-assembly approach using mixed monolayers of mercaptoundecanoic acid and mercaptoundecanol. Cyclic voltammetry revealed quasi-reversible electrochemical behavior of the covalently fixed protein with a formal potential of +10 mV vs. Ag/AgCl. Polarized at +150 mV vs. Ag/AgCl the electrode was found to be sensitive to superoxide radicals in the range 300–1200 nmol L^–1. Compared with metal needle electrodes sensitivity and reproducibility could be improved and combined with the easiness of preparation. This allows the fabrication of disposable sensors for nanomolar superoxide concentrations. By changing the electrode potential the sensor can be switched from response to superoxide radicals to hydrogen peroxide—another reactive oxygen species. H₂O₂ sensitivity can be provided in the range 10–1000 mol L^–1 which makes the electrode suitable for oxidative stress studies.     

The preparation,characterization, photoelectrochemical and photocatalytic properties of lanthanide metal-ion-doped TiO2 nanoparticles

Lanthanide metal-ion-doped TiO₂ nanoparticles were prepared with hydrothermal method and characterized with X-ray diffraction (XRD), transmission electron microscopy (TEM), inductively coupled plasma (ICP) and fluorescence spectrum. The results showed that a small part of metal ions entered into the lattice of TiO₂ and others adsorbed on the surface of TiO₂. The photoelectrochemical and photocatalytic properties of these lanthanide metal-ion-doped TiO₂ nanoparticles were investigated and the results showed that the photoresponse of Eu³⁺-, La³⁺-, Nd³⁺- and Pr³⁺-doped TiO₂ electrodes were much larger and that of Sm³⁺-doped TiO₂ electrode was a little larger than that of undoped TiO₂ electrode, indicating that the photogenerated carriers were separated more efficiently in Eu³⁺-, La³⁺-, Nd³⁺- and Pr³⁺-doped TiO₂ nanoparticles than in undoped TiO₂ nanoparticles. The photocatalytic degradation of rhodamine B (RB) was conducted in the suspension of lanthanide metal-ion-doped TiO₂ nanoparticles, and its first-order reaction rate constant (k) and average initial rate (r_ini) were significantly higher in the presence of Eu³⁺-, La³⁺-, Nd³⁺- and Pr³⁺-doped TiO₂ nanoparticles than those in the presence of undoped TiO₂ nanoparticles. The enhanced photocatalytic degradation rate of RB in the presence of Eu³⁺-, La³⁺-, Nd³⁺- and Pr³⁺-doped TiO₂ nanoparticles is attributed to increased charge separation in these systems. The effect of the content of La³⁺ on the reaction parameters (k and r_ini) was also investigated and the result showed that there was an optimal value (ca. 0.5%) of the content of La³⁺ to make the rate constant (k) and average initial rate (r_ini) reach the maxima.     

Radioluminescence of Europium(III) in POCl3–SnCl4–235UO2+ 2–Eu3+, and D2O–235UO2+ 2–Eu3+ Solutions

Results of studying the spectral and luminescent properties of Eu³⁺ ions upon homogeneous excitation of POCl₃–SnCl₄–^-UO²⁺ ₂–Eu³⁺ and D₂O–²³⁵UO²⁺ ₂–Eu³⁺ solutions by -particles are presented. It was found that the radioluminescence intensity of Eu³⁺ ions in both solvents increases proportionally to the energy input by -particles. The yield of radioluminescence photons from europium ions in the POCl₃–SnCl₄–UO²⁺ ₂–Eu³⁺ solutions is more than nine times as high as that in D₂O–UO²⁺ ₂–Eu³⁺. The radiation-chemical yields of excited ⁵ D ₀ states of Eu³⁺ ions are 0.74 ± 0.07 and 0.18 ± 0.02 ions/100 eV in POCl₃–SnCl₄–UO²⁺ ₂–Eu³⁺ and D₂O–UO²⁺ ₂–Eu³⁺ solutions, respectively.     

Electrochemical Behavior of a Copper Electrode in Solid RbCu4Cl3I2Electrolyte

The electrochemical behavior of a copper electrode in solid RbCu₄Cl₃I₂electrolyte is studied by galvanostatic and potentiostatic methods. It is found that a Cu₂O layer 1 m thick exists at the interface between the Cu electrode and RbCu₄Cl₃I₂. The layer blocks the electrochemical reaction Cu⁰– e Cu⁺, which involves with metallic copper. At low overpotentials, the Cu electrode acts as an inert redox electrode. At the Cu₂O/RbCu₄Cl₃I₂interface, the electrochemical reaction Cu⁺– e Cu²⁺occurs, which involves Cu²⁺ions. The reaction rate is limited by slow diffusion of Cu²⁺ions in RbCu₄Cl₃I₂. The initial concentration of Cu²⁺ions in the electrolyte near this interface is about 1.4 × 10¹⁷cm^–3. The exchange current density is (4 ± 2) × 10^–6A/cm². At potentials exceeding 8–10 mV, an electric breakdown of the Cu₂O layer occurs, and the reaction with metallic copper becomes unblocked. At 10 mV < < 100 mV, the rate of this reaction is limited by the nucleation of copper crystals and the nuclei growth. At > 120 mV, the reaction rate is limited by charge transfer.     

Electrochemical Capacitors

The current literature sources on the electrochemical capacitors, which are divided into the film (dielectric), electrolytic, and supercapacitors, are reviewed. The supercapacitors are in turn subdivided into the double-layer capacitors, which use the EDL recharge on a highly-developed interfacial surface of electrodes; pseudocapacitors, where the charge is stored in a faradaic pseudocapacitance of sufficiently reversible redox reactions and the EDL capacitance; and hybrid capacitors, which employ a variety of electrodes. A macrokinetic theory of operation of double-layer capacitors is considered. Effect of various factors on the properties of electrodes utilized in supercapacitors is analyzed. A novel type of hybrid capacitor, which has a negative electrode of activated carbon cloth and a PbSO₄/PbO₂ positive electrode, is proposed. A theory of capillary equilibrium in hermetically sealed electrochemical capacitors is considered. Specific features of the application of voltammetric and impedance methods to studying electrochemical processes in supercapacitors are revealed. Characteristics of electrochemical capacitors and batteries are compared.     

Synthesis and optical properties of BaTiO3:Eu3+@SiO2 glass ceramic nano particles

BaTiO₃:(5 %)Eu³⁺ nanoparticles and BaTiO₃:(5 %)Eu³⁺@SiO₂ composites were synthesized by the solvothermal method. The effects on the structure, morphology and luminescent properties were studied using samples with different molar ratios of BaTiO₃:(5 %)Eu³⁺@SiO₂: 60:40, 50:50, 40:60, 30:70, 20:80, 10:90, 08:92, 6.5:93.5, 05:95, and 1.5:98.5. When the amount of silica in the composites was increased, the orange emission of Eu³⁺ increased, too; this was observed by exciting the charge transfer band centered at 283 nm. Furthermore, an increase in the intensity of the emission was obtained under excitation at 394 nm as a consequence of the improvement in the crystallinity of the samples. The presence of silica and the degree of crystallinity of the samples were determined through the Fourier transform infrared spectra and X-ray diffraction patterns. All of the results suggest that our ceramic material could be a good candidate for biomedical applications such as biolabeling, since the luminescence of BaTiO₃:(5 %)Eu³⁺@SiO₂ composites have an emission intensity higher than that of nanoparticles composed solely of BaTiO₃:Eu³⁺. This work demonstrates that BaTiO₃:Eu³⁺@SiO₂ composites have an emission intensity higher than that of nanoparticles composed solely of BaTiO₃:Eu³⁺.