Reaction of lithiated 2-trimethylsilyl-1,3-dithiane with (±)-pantolactone

Pantolactone methoxymethyl ether reacted with lithiated 2-trimethylsilyl-1,3-dithiane to give the corresponding ketene dithioacetal and formal monoaddition product of silicon-free 2-lithio-1,3-dithiane at a ratio of 2:1. Possible ways of formation of the latter are discussed.     

2-十六烷氧基-5-羟甲基-1,3-苯二甲醛的合成

以对羟基苯甲醛为原料,经酚的二溴代、酚羟基的烷基化、醛的还原、醇羟基的保护、二甲酰化、去保护六步反应合成了2-十六烷氧基-5-羟甲基-1,3-苯二甲醛,其结构经1H NMR,IR和HR-MS确证。     

Conformational Analysis of 5-Ethyl-5-hydroxymethyl-2,2-dimethyl-1,3-dioxane

Russian Journal of Organic Chemistry - Computer simulation of conformational transformations of 5-ethyl-5-hydroxymefhyl-2,2-dimefhyl-1,3-dioxane in the gas phase, as well as in mixtures with...     

Comparative conformational analysis of 1,3-dioxane and 1,3-dithiane

It was shown by ab initio quantum-chemical approximations HF/6-31G(d) and MP2/6-31G(d)//HF/6-31G(d) that the conformational isomerization of 1,3-dioxane and 1,3-dithiane proceeded along common routes. The potential energy surface of both compounds contains six minima including the chair invertomers and enantiomeric flexible forms. They are separated by several potential barriers. It was established by molecular dynamics method that the flexible conformers at heating and keeping at 295–300 K transformed into each other and in the chair conformer.     

A rapid, efficient and selective conversion of aldehydes and acetals to their 1,3-dithiane derivatives with 2,2-dimethyl-2-sila-1,3-dithiane

Aldehydes and acetals are cleanly and rapidly converted to the corresponding dithianes with 2,2-dimethyl-2-sila-1,3-dithiane and stoichiometric amounts of boron trifluoride etherate even in the presence of ketones, which do not react competitively with the reagent.     

Crystal structures of 2-ferrocenylmethylidenehydrazono-1,3-dithiane and 2-ferrocenylmethylidenehydrazono-1,3-dithiepane

Two compounds of 2-ferrocenylmethylidenehydrazono-1,3-dithiane (1) and 2-ferrocenylmethylidenehydrazono-1,3-dithiepane (2) are synthesized and their single crystal structures are determined by the X-ray diffraction method. Compound 1 belongs to the orthorhombic Pca2₁ space group with the cell parameters: a = 13.989(4) Å, b = 5.785(2) Å, c = 18.231(5) Å, V = 1475.4(7) ų; while compound 2 crystallizes in a monoclinic symmetry, P2₁/c space group with a = 15.320(2) Å, b = 5.8028(6) Å, c = 36.584(4) Å, β = 91.932(1)° and V = 3250.4(6) ų.     

Addition of lithiated C-nucleophiles to 2,3-O-isopropylidene-D-erythronolactone: stereoselective formation of a furanose C-disaccharide

Addition of PhLi and lithiated dithianes to 2,3-O-isopropylidene-D-erythronolactone affords lactols, which are reduced with Et3SiH to the corresponding C-glycosides, the structures of two of which have been solved by X-ray diffraction. The use of a d-ribose-derived lithiated dithiane nucleophile in this chemistry allows for the convenient construction of a furanose C-disaccharide.     

Collision-induced dissociations of substituted benzyl anions: Deprotonated 2-Phenyl-1,3-dithiane

Deprotonated 2-phenyl-1,3-dithiane undergoes competitive losses of H˙, C₃H₆ C₂H₄S, C₃H₄S, C₇H₆S, C₁₀H₁₀ and C₁₀H₁₀S upon collisional activation. The elimination of H occurs from the phenyl ring. The loss of C₃H₆ occurs by simple cleavage of the dithiane ring. All other processes involve specific proton transfer followed by either cleavage or internal nucleophilic displacement.     

Thermochemistry of 1,3-dithiacyclohexane 1-oxide (1,3-dithiane sulfoxide): calorimetric and computational study

The enthalpies of combustion and sublimation of 1,3-dithiacyclohexane 1-oxide (1,3-dithiane sulfoxide, 2) were measured by a rotating-bomb combustion calorimeter and the Knudsen effusion technique, and the gas-phase enthalpy of formation was determined, DeltafH degrees m(g) = -98.0 +/- 1.9 kJ mol(-1). This value is not as large (negative) as could have been expected from comparison with thermochemical data available for the thiane/thiane oxide reference system. High-level ab initio molecular orbital calculations at the MP2(FULL)/6-31G(3df,2p) level were performed, and the optimized molecular and electronic structures of 2 afforded valuable information on (1) the relative conformational energies of 2-axial and 2-equatorial--the latter being 7.1 kJ mol(-1) more stable than 2-axial, (2) the possible involvement of nS --> sigma*(C-S(O)) hyperconjugation in 2-equatorial, (3) the lack of computational evidence for sigma(S-C) --> sigma*(S-O) stereoelectronic interaction in 2-equatorial, and (4) the relevance of a repulsive electrostatic interaction between sulfur atoms in 1,3-dithiane sulfoxide, which apparently counterbalances any nS --> sigma*(C-S(O)) stabilizing hyperconjugative interaction and accounts for the lower than expected enthalpy of formation for sulfoxide 2.     

Calorimetric and computational study of 1,3-dithiacyclohexane 1,1-dioxide (1,3-dithiane sulfone)

The enthalpies of combustion and sublimation of 1,3-dithiacyclohexane 1,1-dioxide (1,3-dithiane sulfone) were measured by a rotating-bomb combustion calorimeter and the Knudsen effusion technique, and the gas-phase enthalpy of formation was determined, Delta(f)H(m)*(g) = -326.3 +/- 2.0 kJ mol(-1). Standard ab initio molecular orbital calculations at the G2(MP2) level were performed, and a theoretical study on molecular and electronic structure of the compound has been carried out. Calculated Delta(f)H(m)*(g) values agree very well with the experimental one. These experimental and theoretical studies support the relevance of the repulsive electrostatic interaction between sulfur atoms in 1,3-dithiane sulfone, that apparently counterbalances any n(S) --> rho(C-SO2)* stabilizing hyperconjugative interaction.     

1,3-Dioxolan-4-ones and 1,3-oxathiolan-5-ones. Configuration of cis and trans isomers

The attempted acid-catalyzed azeotropic removal of water from a mixture containing lactamide and chloral in refluxing toluene lead to the elimination of ammonia; both cis- and trans-5-methyi-2-(trichloromethyl)-1,3-dioxolan-4-one were isolated. A number of 1,3-dioxolan-4-ones and 1,3-oxathiolan-5-ones were obtained by cyclodehydration of aldehydes with α-hydroxy- and α-mercapto-carboxylic acids in the presence of boron trifluoride etherate. Geometric isomers were separated, and their configurations were determined by nuclear magnetic resonance.     

Preparation and stereoselectivity of 1,3-dipolar cycloaddition ofD-glucose-derived nitrones to N-arylmaleimides

Summary Nitrones2 derived fromD-glucose oxime and benzaldehydes without employing any protection of hydroxyl group were isolated in pure state. The 1,3-dipolar cycloaddition of2 to N-arylmaleimides gave predominantly theanti isoxazolidines3 and was rationalized byZ/E isomerization of N-glycosylnitrones2. The structure and steric configuration of the products have been assigned on the basis of¹H- and¹³C-NMR spectroscopy. AM1 calculations of the nitrones and MM2 calculations of the adducts were performed.

---

Darstellung und Stereoselektivität der 1,3-dipolaren Cycloaddition vonD-Glucose-abgeleiteten Nitronen an N-Arylmaleimiden

Zusammenfassung Die Nitrone2 wurden ausD-Glucoseoxim und Benzaldehyden ohne Schutz von Hydroxylgruppen in reinem Zustand erhalten. Die 1,3-dipolare Cycloaddition von2 an N-Arylmaleimiden ergab bevorzugt dieanti-Isoxazolidine3; dies wurde über eineZ/E-Isomerisierung der N-Glycosylnitrone2 rationalisiert. Struktur und Stereochemie wurden auf Basis von¹H- und¹³C-NMR-Spektroskopie ermittelt. Außerdem wurden AM1-Berechnungen an den Nitronen und MM2-Rechnungen an den Addukten ausgeführt.

     

Synthesis of 6-hydroxymethyl-1,3-dimethyllumazine by rearrangement of the corresponding 6-methyllumazine 5-oxide

Starting with a chloronitrouracil, the synthesis of 1, 3, 6-trimethyllumazine has been achieved. Oxidation to the 5-oxide and subsequent rearrangement gave 6-hydroxymethyl-1, 3-dimethyllumazine. Because of the method of synthesis, the product is uncontaminated with the 7-isomer.