Preparation, characterization, and application of electrodes modified with electropolymerized one-dimensional Magnus' green salts: Pt(NH3)4 · PtCl4 and Pt(NH3)4 · PtCl6

We report the modification of various electrode surfaces with electropolymerized Magnus' green salts, [Pt(NH₃)₄ · PtCl₄] _n and [Pt(NH₃)₄ · PtCl₆] _n . The modified electrodes were prepared by cyclic scanning of the electrode potential in an aqueous solution containing Pt(NH₃)₄ ²⁺ and PtCl₄ ²⁻ or PtCl₆ ²⁻ and the supporting electrolyte. The conditions for the film deposition were studied in detail. Several surface analytical techniques, including micro-Raman scattering and X-ray diffraction, were employed to characterize the modifier film. The electrochemical behavior of the modified electrode was studied in detail and the modified electrodes display very good electrocatalytic activity in the oxidation of ascorbic acid, hydrogen peroxide, thiosulfate, and especially nitric oxide. Received: 22 April 1999 / Accepted: 30 June 1999     

Determination of hemoglobin at a novel NH2/ITO ion implantation modified electrode

A novel electrode was prepared by implanting NH₂ ⁺ into an ITO film (NH₂/ITO). Gold nanoparticles were deposited on the surface of NH₂/ITO electrode. The NH₂/ITO and Au/NH₂/ITO electrodes were used to determine hemoglobin (Hb) immobilized on the electrodes surfaces. The relationship of the reductive peak current value of Hb among different electrodes was: Hb/ITO:Hb/Au/ITO:Hb/NH₂/ITO:Hb/Au/NH₂/ITO=1:1.5:2:4. The linkage between the –NH₂ implanted into ITO film and the –COOH of Hb was recognized to be the reason for the increase of active Hb coverage on NH₂/ITO electrode compared with the ITO electrode. Increase of active Hb coverage on Au/NH₂/ITO compared with Au/ITO was attributed to the different amount of gold nanoparticles deposited. The determination of Hb at an Au/NH₂/ITO electrode was optimized. Calibration curve was obtained over the range of 1.0 × 10⁻⁸ – 1.0 × 10⁻⁶ mol · L⁻¹ with a detection limit of 1.0 × 10⁻⁸ mol · L⁻¹. Results showed that the novel NH₂/ITO and Au/NH₂/ITO electrodes exhibited good stability, reproducibility besides better electrochemical performance. Correspondence: Jing Bo Hu, Department of Chemistry, Beijing Normal University, Beijing 100875, China     

Ethanol oxidation at metal–zeolite-modified electrodes in alkaline medium. Part-1: gold–zeolite-modified graphite electrode

Gold–zeolite-modified graphite (AuZG) electrode shows higher catalytic activity for ethanol oxidation in alkaline medium compared with massive gold or gold-modified graphite (Au/G) electrodes. The activity of this electrode depends on the amount of zeolite loaded on the graphite surface and on the soaking time in Au³⁺ solution. The effects of both scan rate and ethanol concentration on the anodic peak height are indicatives of a diffusion-controlled process. Current decay measurements indicate that the activity of studied electrodes towards poisoning tolerance decreases in the following order: AuZG > Au/G > Au. This paper is dedicated to Prof. Dr. T. Iwasita for her 65th birthday.     

Electrochemical behavior of hydrogen peroxide sensor based on new methylene blue as mediator

A novel amperometric hydrogen peroxide sensor was proposed by co-immobilizing new methylene blue (NMB) and Horseradish peroxidase (HRP) on glassy carbon electrode through covalent binding. The electrochemical behavior of the sensor was studied extensively in 0.1 mol/L phosphate buffering solution (pH = 7.0). The experiments showed NMB could effectively transfer electrons between hydrogen peroxide and glassy carbon electrode. The electron transfer coefficient and apparent reaction rate constant were determined to be 0.861 and 1.27 s⁻¹. The kinetic characteristics and responses of sensor on H₂O₂ were investigated. The Michaelis constant is 8.27 mol/L and the linear dependence of current on H₂O₂ is in the range of 2.5–100 μmol/L. At the same time, the effects of solution pH, buffer capacity, and temperature on the sensor were examined. Translated from Chemistry, 2006, 23(8): 916–920 [译自: 化学通报]     

Kinetics of oxidation of hydrogen peroxide at hemin-modified electrodes in nonaqueous solvents

Hemin adsorbed on graphite electrodes and used to catalyse the reduction of hydrogen peroxide in an aqueous buffer and in a range of nonaqueous solvents has been described. The immobilised hemin is stable in the solvents examined. The rate limiting step involves the reaction between hemin and hydrogen peroxide. Kinetic analysis of the response in nonaqueous solvents showed that I_max / K_m^app increased linearly with the solvent hydrophobicity (log P) in all solvents, a trend that is explained by preferable partitioning of hydrogen peroxide into the polar hemin layer.     

Temperature dependence of hydrogen overvoltage on nickel and iron in acid solution

The temperature dependence of hydrogen overvoltage on mechanically and chemically polished nickel electrodes, on iron armco, and iron of high purity in 0.25 M H₂SO₄ are studied in the interval of temperatures 298–278 K. It is established that the influence of temperature on the slope of Tafel line depends essentially on the type of electrodes. The apparent energy of activationE and pre-exponential factorB are determined. The results show an important role of the electrode surface treatment and purity of the metal in the determination of energetic parameters of the hydrogen evolution reaction. The most striking result is that in the case of nickel electrodes with mechanically polished surfaceE increases andB decreases with the increase of overvoltage. Some aspects of nonclassical behavior of electrodes studied are discussed. Dedicated to the ninetieth anniversary of Ya.M. Kolotyrkin’s birth.     

Voltammetric determination of sorbite at a mechanically renewed copper electrode

Potentials and currents of D-sorbitol oxidation peaks as a function of polarization conditions for a copper electrode in situ renewed by mechanically cutting a 0.5-μm surface layer are studied by direct-current cyclic voltammetry. Oxidation peaks of sorbite emerge in cyclic voltammograms recorded in alkaline supporting electrolytes (0.05–0.10 M KOH and NaOH solutions) upon scanning the potential to the anodic region (E _p = 0.50–0.58 V) and in the reverse direction (E _p = 0.60–0.62 V). The shape and parameters of these peaks depend on the concentration of KOH, because of the different copper oxides involved in the oxidation of sorbite formed at the electrode surface. The regeneration of the electrode surface is the necessary condition for good reproducibility of the peak parameters. The signals obtained on the surface of the unrenewed electrodes are almost halved and less reproducible. The calibration graph of the current of the sorbite oxidation peak as a function of its concentration is linear in the range from 5 × 10⁻⁴ to 1 × 10⁻² M.     

Gold particles supported on self-organized nanotubular TiO2 matrix as highly active catalysts for electrochemical oxidation of glucose

Au/TiO₂/Ti electrode was prepared by a two-step process of anodic oxidation of titanium followed by cathodic electrodeposition of gold on resulted TiO₂. The morphology and surface analysis of Au/TiO₂/Ti electrodes was investigated using scanning electron microscopy and EDAX, respectively. The results indicated that gold particles were homogeneously deposited on the surface of TiO₂ nanotubes. The nanotubular TiO₂ layers consist of individual tubes of about 60–90 nm in diameter, and the electrode surface was covered by gold particles with a diameter of about 100–200 nm which are distributed evenly on the titanium dioxide nanotubes. This nanotubular TiO₂ support provides a high surface area and therefore enhances the electrocatalytic activity of Au/TiO₂/Ti electrode. The electrocatalytic behavior of Au/TiO₂/Ti electrodes in the glucose electro-oxidation was studied by cyclic voltammetry. The results showed that Au/TiO₂/Ti electrodes exhibit a considerably higher electrocatalytic activity toward the glucose oxidation than that of gold electrode.     

Enzymatic detection of glucose using fluoride-selective electrodes with polymeric membranes

The feasibility of using polymeric membrane fluoride-selective electrodes based on zirconium(IV) 5,10,15,20-tetraphenylporphyrin as a detector in a flow-injection analysis (FIA) system for glucose determination was examined. The optimization of enzymatic reactions, FIA system configuration and enzyme-immobilization process was performed. It was shown that the resulting flow-injection system exhibits good working parameters, such as reproducibility, linear range of glucose concentration (3 × 10⁻³–10⁻¹ M), sampling rate (60 samples per minute) and lifetime (over 1 month). The performance of the polymeric membrane electrode was similar to that of a crystalline LaF₃ electrode. The results of glucose determination in synthetic samples with the proposed system show good agreement with real glucose concentrations.     

Electrochemical behavior of nicotinamide using carbon paste electrode modified with macrocyclic compounds

The electrochemical behavior of nicotinamide was studied at a carbon paste electrode and the electrodes modified with macrocyclic compounds using voltammetric and impedance measurements. The electrodes so formed were able to bind nicotinamide ions chemically and gave better voltammetric responses than the unmodified ones. The macrocycles used as modifiers for the electrode preparation were 18-crown-6, dicyclohexano-18-crown-6, dibenzo-18-crown-6, 7,16-dibenzyl-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane, 1,4,7,10,13,16-hexathiacyclooctadecane (Hexathia), 1,4,7,10-tetratosyl-1,4,7,10-tetraazacyclododecane, 1,4,8,11-tetraazacyclooctadecane, c-Methylcalix[4]resorcenarene and calix[8]arene. Among these macrocyclic modified electrodes, hexathia showed more affinity towards nicotinamide and a 2.3-fold increase in voltammetric signal was obtained. Impedance measurement was used to confirm this enhancement observed on modified electrode. This increase in anodic peak current was then used for finding linear working range, which was 0.1–500 μg mL⁻¹ with a detection limit of 0.03 μg mL⁻¹ by DPV. Interference from other vitamins like thiamine HCl (Vit. B₁), riboflavin (Vit. B₂), pyridoxine HCl (Vit. B₆) cynocobamine (Vit. B₁₂), para-aminobenzoic acid (PABA) and ascorbic acid (Vit. C) was also studied. The modified electrode could be used for the simultaneous determination of riboflavin, nicotinamide and pyridoxine HCl. It has also been utilized for the analysis of nicotinamide in pharmaceutical preparations.     

Development of membrane electrodes for selective determination of some antiepileptic drugs in pharmaceuticals,plasma and urine

Newly developed, simple, low-cost and sensitive ion-selective electrodes have been proposed for determination of some antiepileptic drugs such as lamotrigine, felbamate, and primidone in their pharmaceutical preparations as well as in biological fluids. The electrodes are based on poly(vinyl chloride) membranes doped with drug–tetraphenyl borate (TPB) or drug–phosphotungstic acid (PT) ion-pair complexes as molecular recognition materials. The novel electrodes displayed rapid Nernstian responses with detection limits of approximately 10⁻⁷ M. Calibration graphs were linear over the ranges 5.2 × 10⁻⁷–1.0 × 10⁻³, 1.5 × 10⁻⁶–1.0 × 10⁻³, and 2.6 × 10⁻⁷–1.0 × 10⁻³ M for drug–TPB and 5.8 × 10⁻⁷–1.0 × 10⁻³, 1.8 × 10⁻⁷–1.0 × 10⁻³, and 6.6 × 10⁻⁷–1.0 × 10⁻³ M for drug–PT electrodes, respectively, with slopes ranging from 52.3 to 62.3 mV/decade. The membranes developed have potential stability for up to 1 month and proved to be highly selective for the drugs investigated over other ions and excipients. The results show that the selectivity of the ion-selective electrodes is influenced significantly by the plasticizer. The proposed electrodes were successfully applied in the determination of these drugs in pharmaceutical preparations in four batches of different expiry dates. Statistical Student’s t test and F test showed insignificant systematic error between the ion-selective electrode methods developed and a standard method. Comparison of the results obtained using the proposed electrodes with those found using a reference method showed that the ion-selective electrode technique is sensitive, reliable, and can be used with very good accuracy and high percentage recovery without pretreatment procedures of the samples to minimize interfering matrix effects. Figure Structure of lamotrigine, felbanate and primidone     

Kinetics of mixed-controlled oxygen reduction at nafion-impregnated Pt-alloy-dispersed carbon electrode by analysis of cathodic current transients

The effects of Co alloying to Pt catalyst and Nafion pretreatment by NaClO₄ solution on the rate-determining step (RDS) of oxygen reduction at Nafion-impregnated Pt-dispersed carbon (Pt/C) electrode were investigated as a function of the potential step ΔE employing potentiostatic current transient (PCT) technique. For this purpose, the cathodic PCTs were measured on the pure Nafion-impregnated and partially Na⁺-doped Nafion-impregnated Pt/C and PtCo/C electrodes in an oxygen-saturated 1 M H₂SO₄ solution and analyzed. From the shape of the cathodic PCTs and the dependence of the instantaneous current on the value of ΔE, it was confirmed that oxygen reduction at the pure Nafion-impregnated electrodes is controlled by charge transfer at the electrode surface mixed with oxygen diffusion in the solution below the transition potential step |ΔE _tr| in absolute value, whereas oxygen reduction is purely governed by oxygen diffusion above |ΔE _tr|. On the other hand, the RDS of oxygen reduction at the partially Na⁺-doped Nafion-impregnated electrodes below |ΔE _tr| is charge transfer coupled with proton migration, whereas above |ΔE _tr|, it becomes proton migration in the Nafion electrolyte instead of oxygen diffusion. Consequently, it is expected in real fuel cell system that the cell performance is improved by Co alloying since the electrode reaches the maximum diffusion (migration) current even at small value of |ΔE|, whereas the cell performance is aggravated by Nafion pretreatment due to the decrease in the maximum diffusion (migration) current.     

Direct electron transfer of hemoglobin on dihexadecyl hydrogen phosphate/single-wall carbon nanotubes film modified Au electrode and its interaction with taxol

Direct electrochemistry of hemoglobin (Hb) immobilized on the dihexadecyl hydrogen phosphate (DHP)/single-wall carbon nanotubes (SWNTs) film modified Au electrode is investigated. The immobilized Hb displays a couple of stable and well-defined redox peaks, whose formal potential (E ⁰) is −0.434 V (SCE) in a phosphate buffer solution of pH 7.0. The formal potential of the heme Fe(III)/Fe(II) couple shifts negatively linearly with increased pH with a slope of −42.3 mV/pH, denoting that one electron transfer accompanies single proton transportation. Both SWNTs and DHP can accelerate the electron transfer between Hb and the electrode. Using DHP/Hb/SWNTs-film-modified Au electrode, the interaction between Hb and taxol is investigated. The voltammetric response of Hb decreases with increasing concentration of taxol. The peak currents decreases proportionally to the taxol concentration at 1.4 × 10⁻⁵ to 1.3 × 10⁻⁴ M, the linear regression equation being Δi (A) = 2.9603 − 0.4225 c_taxol (M), with a correlation coefficient (r) 0.9985, and the detection limit 6.95 × 10⁻⁶ M (signal-to-noise ratio of three). Published in Russian in Elektrokhimiya, 2007, Vol. 43, No. 7, pp. 801–807. The text was submitted by the authors in English.     

Determination of Hydrogen Single Ion Activity Coefficients in Aqueous HCl Solutions at 25°C

The single ion activity coefficients of hydrogen and chloride ions in aqueous HCl solutions have been estimated at 25°C at concentrations up to 1 mol-kg^–1, using potentiometric measurements with ion-selective electrodes and appropriate calibration procedures. Two methods are described for an internal calibration of the electrodes in the extended Debye–Hückel concentration range. The results are compared to the conventional pH calibration with external buffer solutions. Since the latter calibration method does not account for the liquid junction potential E _J which arises at the reference electrode, the resulting activity coefficients are quite different in HCl solutions of higher concentration. These differences between internal and external calibration decrease significantly, when a correction for E _J is introduced into the conventional pH calibration. Hence, in solutions of higher ionic strength the accuracy of the conventional pH electrode calibration using buffer solutions is very limited, when exact H⁺ activities are required. The consistency of the results indicates that the liquid junction potentials in the examined systems calculated by the Henderson/Bates approximation are of reasonable precision.     

Studies on photo-electro-chemical catalytic degradation of acid scarlet 3R dye

The photocatalytic oxidation of poisonous or nonbiodegradable organic pollutants in wastewater has been the focus of numerous environmental investiga- tions in recent years. Selecting excellent-performance photocatalytic material is very important in thes…     

Immobilization of Hemoglobin on the Gold Colloid Modified Pretreated Glassy Carbon Electrode for Preparing a Novel Hydrogen Peroxide Biosensor

A novel hydrogen peroxide (H₂O₂) biosensor was developed by immobilizing hemoglobin on the gold colloid modified electrochemical pretreated glassy carbon electrode (PGCE) via the bridging of an ethylenediamine monolayer. This biosensor was characterized by UV-vis reflection spectroscopy (UV-vis), electrochemical impendence spectroscopy (EIS) and cyclic voltammetry (CV). The immobilized Hb exhibited excellent electrocatalytic activity for hydrogen peroxide. The Michaelis–Menten constant (K _m) was 3.6 mM. The currents were proportional to the H₂O₂ concentration from 2.6 × 10⁻⁷ to 7.0 × 10⁻³ M, and the detection limit was as low as 1.0 × 10⁻⁷ M (S/N = 3).     

Enzyme biosensor based on the immobilization of HRP on SiO<Subscript>2</Subscript>/BSA/Au composite nanoparticles

In this work, an enzyme biosensor based on the immobilization of horseradish peroxidase (HRP) on SiO₂/BSA/Au/thionine/nafion-modified gold electrode was fabricated successfully. Firstly, nafion was dropped on the surface of the gold electrode to form a nafion film followed by chemisorption of thionine (Thi) as an electron mediator via the ion-exchange interaction between the Thi and nafion. Subsequently, the SiO₂/BSA/Au composite nanoparticles were assembled onto Thi film through the covalent bounding with the amino groups of Thi. Finally, HRP was immobilized on the SiO₂/BSA/Au composite nanoparticles due to the covalent conjugation to construct an enzyme biosensor. The surface topographies of the SiO₂/BSA/Au composite nanoparticles were investigated by using scanning electronic microscopy. The stepwise self-assemble procedure of the biosensor was further characterized by means of cyclic voltammetry and chronoamperometry. The enzyme biosensor showed high sensitivity, good stability and selectivity, a wide linear response to hydrogen peroxide (H₂O₂) in the range of 8.0 × 10^-6 ∼ 3.72 × 10^-3 mol/L, with a detection limit of 2.0 × 10^-6 mol/L. The Michaelies-Menten constant K_M^app K_M^{app} value was estimated to be 2.3 mM.     

Kinetics of the hydrogen electrode of a fuel cell with eutectic molten electrolyte (Li, K)2CO3 at 923 K in a coulostatic experiment

The anodic process on the hydrogen electrode in eutectic melt (Li, K)₂CO₃ is studied at 923 K by the coulostatic method. The experiment is performed at a relatively high electrode charge which makes its potential deviate from equilibrium by up to 50–100 mV. The relaxation dependence η vs.t is analyzed theoretically within the Ang-Sammels reaction scheme taking into consideration the charge-transfer and adsorption steps. Exchange currents (fluxes) of corresponding processes and the Au, Pt, Ni, and Pd electrode coverages with hydrogen adatoms are estimated. The adsorption step is shown to significantly contribute to the polarization resistance on the hydrogen electrode in a carbonate melt. This should be taken into account when estimating exchange currents of the charge-transfer step by the coulostatic method.     

Electrocatalysis of oxygen reduction by lanthanum-strontium manganate

The electrocatalysis of the oxygen reduction reaction by lanthanum-strontium manganate La_0.5Sr_0.5MnO₃ (LSM) has been studied by cyclic voltammetry using the rotating ring-disc electrode technique (RRDE) in alkaline medium. From the ring-disc data and other kinetic parameters it was concluded that the oxygen reduction occurs by dissociative chemisorption at low overpotentials. At higher overpotentials, the formation of hydrogen peroxide (HO₂⁻ in this case) on the electrocatalyst has been observed. The apparent exchange current density for oxygen reduction on LSM has been found to be 2 × 10⁻⁷ A cm⁻², while the corresponding Tafel slope is 0.100 V per decade. The possible reaction mechanism for electroreduction of oxygen on this oxide catalyst has been discussed. Published in Russian in Elektrokhimiya, 2008, Vol. 44, No. 7, pp. 919–923. The text was submitted by the authors in English.     

Al Electrode Modified by Au Atoms as a Novel Electrode for Electrocatalytic Oxidation of Thiosulfate

An aluminum electrode modified with gold atoms was introduced as a novel electrode. Gold atoms were deposited both chemically and electrochemically onto the aluminum electrode to make an aluminum/gold (Al/Au) modified electrode (ME). The experimental results showed that the Al/Au modified electrode prepared by chemical deposition, exhibits much more current than the electrochemical deposition method. The electrochemical behavior of the Al/Au modified electrode was studied by cyclic voltammometry. This modified electrode showed two pairs of peaks, a₁c₁ and a₂c₂, with surface‐confined characteristics in a 0.5 M phosphate buffer. The dependence of E_pa of the second peak (a₂c₂) on pH shows a Nernestian behavior with a slope of 55 mV per unit pH. The effect of different supporting electrolytes, solution's pH and different scan rates on electrochemical behavior of Al/Au modified electrode was studied. Au deposited electrochemically on a Pt electrode (Pt/Au) was also used as another modified electrode. A comparative study of electrochemical behavior of bare Al, Pt/Au and Al/Au modified electrodes showed that both Pt/Au and Al/Au electrodes have the ability of electrocatalytic oxidation of S₂O₃^2?, but the electrocatalytic oxidation on the latter was better than the former. The kinetics of the catalytic reaction was investigated by using cyclic voltammetry and chronoamperometry techniques. The average value of the rate constant for the catalytic reaction and the diffusion coefficient were evaluated by means of chronoamperometry technique.