Self-assembly of C(60) pi-extended tetrathiafulvalene (exTTF) dyads on gold surfaces

The first self-assembly of a C60 pi-extended tetrathiafulvalene (exTTF) dyad on a gold surface is reported. Four fullerene derivatives, two of them containing p-quinonoid pi-extended tetrathiafulvalenes (exTTFs), have been synthesized, and their solution electrochemistry has been investigated by means of cyclic voltammetry. Fullerene-containing SAMs of thioctic acid derivatives 3 and 6 have also been investigated by cyclic voltammetry. The cyclic voltammograms of both compounds exhibit three reversible reduction waves, and for compound 6, one irreversible oxidation process corresponding to the oxidation of the exTTF subunit is observed. Stable self-assembled monolayers (SAMs) of fullerene derivative 3 were formed on gold surfaces, whereas dyad 6 does not present a very clear electrochemical response, most probably as a result of structural rearrangements on the monolayer or charge transfer between the C60 and exTTF moieties.     

Cyclic 7-edge-cuts in fullerene graphs

A fullerene graph is a planar cubic graph whose all faces are pentagonal and hexagonal. The structure of cyclic edge-cuts of fullerene graphs of sizes at most 6 is known. In the paper we study cyclic 7-edge connectivity of fullerene graphs, distinguishing between degenerate and non-degenerate cyclic edge-cuts, regarding the arrangement of the 12 pentagons. We prove that if there exists a non-degenerate cyclic 7-edge-cut in a fullerene graph, then the graph is a nanotube unless it is one of the two exceptions presented. We determined that there are 57 configurations of degenerate cyclic 7-edge-cuts, and we listed all of them.     

Complexation of Sc3N@C80 endohedral fullerene with cyclic Zn-bisporphyrins: solid state and solution studies

We report the synthesis of two cyclic β-pyrrole unsubstituted meso-tetraphenyl bisporphyrins in which the porphyrin units are connected by two 2,3-hexadiynyl-1,6-dioxo or two hexyl-1,6-dioxo spacers, respectively. Both cyclic porphyrin dimers exist in solution as mixtures of two conformational isomers. In the solid state, the receptor with diynyl spacers forms a 1:1 complex with the icosahedral (I(h)) isomer of the trimetallic nitride endohedral fullerene Sc(3)N@C(80). In this complex the receptor adopts a scoop-shaped conformation having a dihedral angle of 87.25° between the two porphyrin planes. The hexyl spaced analogue, however, adopts a similar conformation upon encapsulation of one molecule of Sc(3)N@C(80) in a self-assembled dimeric capsule. The capsular complexes pack in columns and render the fullerene units completely isolated. In toluene solution, (1)H NMR experiments indicate that the endohedral fullerene Sc(3)N@C(80) is exclusively bound by the expanded isomer of both dimers. UV-vis and fluorescence titration experiments confirmed the existence of strong π-π interactions between the fullerene Sc(3)N@C(80) and the flexible bisporphyrin dimer with hexyl spacers. At micromolar concentration, the flexible receptor forms only a 1:1 complex with the endohedral fullerene with stability constant value of K(a) = 2.6 ± 0.3 × 10(5) M(-1).     

Cyclic edge-cuts in fullerene graphs

In this paper, we study cyclic edge-cuts in fullerene graphs. First, we show that the cyclic edge-cuts of a fullerene graph can be constructed from its trivial cyclic 5- and 6-edge-cuts using three basic operations. This result immediatelly implies the fact that fullerene graphs are cyclically 5-edge-connected. Next, we characterize a class of nanotubes as the only fullerene graphs with non-trivial cyclic 5-edge-cuts. A similar result is also given for cyclic 6-edge-cuts of fullerene graphs.     

Reactions of fullerenes with reactive methylene organophosphorus reagents: efficient synthesis of organophosphorus group substituted C60 and C70 derivatives

Treatment of C70 with cycloalkylaminomethylenebisphosphonates in the presence of NaH gave corresponding C70 dimers 1 in good yield, while the methanofullerenes, C70>CH(PO3Et2) (3) and C70>C(PO3Et2)2 (4) or C60>CH(PO3Et2) (5) and C60>C(PO3Et2)2 (6), were obtained, respectively, by the reaction of C70 or C60 with tetraethyl methylenediphosphonate in the presence of NaH. Diethyl cyanomethylphosphonate reacted with C60 or C70 under similar conditions to afford C60>C(PO3Et2)CN (7) and C70>C(PO3Et2)CN (8). Furthermore, the presence of weak electronic interactions between two fullerene cages of fullerene dimers was demonstrated by cyclic voltammetry. A radical mechanism was proposed for the formation of the fullerene derivatives on the basis of the ESR studies.     

Photoswitchable Norbornadiene–Quadricyclane Interconversion Mediated by Covalently Linked C60

The synthesis and properties of various norbornadiene/quadricyclane (NBD/QC) fullerene hybrids are reported. By cyclopropanation of C₆₀ with malonates carrying the NBD scaffold a small library of NBD–fullerene monoadducts and NBD–fullerene hexakisadducts was established. The substitution pattern of the NBD scaffold, as well as the electron affinity of the fullerene core within these hybrid systems, has a pronounced impact on the properties of the corresponding energy rich QC derivatives. Based on this, the first direct photoisomerization of NBD–fullerene hybrids to their QC derivatives was achieved. Furthermore, it was possible to use the redox-active fullerene core of a QC–fullerene monoadduct to enable the back reaction to form the corresponding NBD–fullerene monoadduct. Combining these two processes enables switching between NBD and QC simply by changing the irradiation wavelength between 310 and 400 nm. Therefore, turning this usually photo/thermal switch into a pure photoswitch. This not only simplifies the investigation of the underlying processes of the NBD–QC interconversion within the system, but also renders such hybrids interesting for applications as molecular switches.     

Fullerene-derivatized amino acids: synthesis, characterization, antioxidant properties, and solid-phase peptide synthesis

A series of [60]fullerene-substituted phenylalanine (Baa) and lysine derivatives have been prepared by the condensation of 1,2-(4'-oxocyclohexano)fullerene with the appropriately protected (4-amino)phenylalanine and lysine, respectively. Conversion of the imine to the corresponding amine is achieved by di-acid catalyzed hydroboration. The reduction of the imine is not accompanied by hydroboration of the fullerene cage. The [70]fullerene phenylalanine derivative has also been prepared as have the di-amino acid derivatives. The compounds were characterized by MALDI-TOF mass spectrometry, UV/Vis spectroscopy, and cyclic voltammetry. 1H and 13C NMR spectroscopy allowed the observation of diastereomers. Fullerene-substituted peptides may be synthesized on relatively large scale by solid-phase peptide synthesis. The presence of the C60-substituted amino acid in a peptide has a significant effect on the secondary structures and self-assembly properties of peptides as compared to the native peptide. The antioxidant assay of Baa and a Baa-derived anionic peptide was determined to be significantly more potent than Trolox.     

Synthesis of Amphiphilic Fullerene Derivatives and Their Incorporation in Langmuir and Langmuir‐Blodgett Films

Various amphiphilic fullerene derivatives were prepared by functionalization of [5,6]fullerene‐C₆₀‐I_h (C₆₀) with malonate or bis‐malonate derivatives obtained by esterification of the malonic acid mono‐esters 5 – 7 . Cyclopropafullerene 10 was obtained by protection of the carboxylic acid function of 6 as a tert‐butyl ester, followed by Bingel addition to C₆₀ and a deprotection step (Scheme 2). The preparation of 10 was also attempted directly from the malonic acid mono‐ester 6 under Bingel conditions. Surprisingly, the corresponding 3′‐iodo‐3′H‐cyclopropa[1,9][5,6]fullerene‐C₆₀‐I_h‐3′‐carboxylate 11 was formed instead of 10 (Scheme 3). The general character of this new reaction was confirmed by the preparation of 15 and 16 from the malonic acid mono‐esters 13 and 14 , respectively (Scheme 4). All the other amphiphilic fullerene derivatives were prepared by taking advantage of the versatile regioselective reaction developed by Diederich and co‐workers which led to macrocyclic bis‐adducts of C₆₀ by a cyclization reaction at the C‐sphere with bis‐malonate derivatives in a double Bingel cyclopropanation. The bis‐adducts 37 – 39 with a carboxylic acid polar head group and four pendant long alkyl chains of different length were prepared from diol 22 and acids 5 – 7 , respectively (Scheme 9). In addition, the amphiphilic fullerene derivatives 45, 46, 49, 54 , and 55 bearing different polar head groups and compound 19 with no polar head group were synthesized (Schemes 11–13, 15, and 5, resp.). The ability of all these compounds to form Langmuir monolayers at the air‐water interface was investigated in a systematic study. The films at the water surface were characterized by their surface pressure vs. molecular area isotherms, compression and expansion cycles, and Brewster‐angle microscopy. The spreading behavior of compound 10 was not good, the two long alkyl chains in 10 being insufficient to prevent aggregation resulting from the strong fullerene‐fullerene interactions. While no films could be obtained from compound 19 with no polar head group, all the corresponding amphiphilic fullerene bis‐adducts showed good spreading characteristics and reversible behavior upon successive compression/expansion cycles. The encapsulation of the fullerene in a cyclic addend surrounded by four long alkyl chains is, therefore, an efficient strategy to prevent the irreversible aggregation resulting from strong fullerene‐fullerene interactions usually observed for amphiphilic C₆₀ derivatives at the air‐water interface. The balance of hydrophobicity to hydrophilicity was modulated by changing the length of the surrounding alkyl chains or the nature of the polar head group. The best results in terms of film formation and stability were obtained with the compounds having the largest polar head group, i.e. 45 and 46 , and dodecyl chains. Finally, the Langmuir films obtained from the amphiphilic fullerene bis‐adducts were transferred onto solid substrates, yielding high‐quality Langmuir‐Blodgett films.     

Electrochemical and chemical reduction of pyridyl-substituted pyrrolidinofullerenes

Using cyclic voltammetry, it is shown that formal reduction potentials of pyridyl-substituted pyrrolidinofullerenes are shifted to negative values as compared with formal potentials of the corresponding redoxtransitions of C₆₀, which indicates weakening of the acceptor properties of the fullerene fragment. NIR spectrophotometric and EPR spectroscopic studies show that cis-2′,5′-di-(4-pyridinyl)pyrrolidino-[3′,4′:1,2][60]fullerene is reduced with 1,8-diazobicyclo[5.4.0]undec-7-ene and morpholine to give a radical anion.     

富勒烯/环糊精复合物及其在生物医药领域的应用

富勒烯有着独特的球形结构,这一结构赋予了其优异的光电及生物性能,在生物医药领域备受关注。环糊精具有良好的水溶性和生物相容性,锥筒状结构赋予了其特异性包合作用,在主客体化学中有着非常重要的地位。富勒烯/环糊精的复合物,结合了富勒烯和环糊精的优势,在DNA切割,光动力学疗法,药物载体等领域发挥了重要作用。本文从富勒烯与环糊精体系的构筑出发,综述了富勒烯/环糊精非共价包合物及共价偶联物在生物医药领域应用的研究进展,且对富勒烯/环糊精复合物的应用进行了展望,为构建新型富勒烯/环糊精复合物提供参考。     

Synthesis and characterization of a ferrocene-linked bis-fullerene[60] dumbbell

A new [60]fullerene dumbbell consisting of two fulleropyrrolidines connected to a central ferrocene unit by amide linkages has been prepared and fully characterized by elemental analysis, (1)H NMR, UV/Vis, fluorescence and mass spectrometry. The electrochemical properties as determined by cyclic voltammetry show ground state electronic communication between the ferrocene and the fullerene units. In addition, the preparaton of a ferrocene building block for an alternative linking approach is presented.     

Fullerenes,Nanotubes, and Graphite as Matrices for Collision Mechanism in Secondary Ion Mass Spectrometry: Determination of Cyclodextrin

A technique for improving the sensitivity of high mass molecular analysis is described. Three carbon species, fullerenes, single walled carbon nanotubes, and highly ordered pyrolytic graphite are introduced as matrices for the secondary ion mass spectrometry analysis of cyclodextrin (C₄₂H₇₀O₃₅, 1134 u). The fullerene and nanotubes are deposited as single deposition, and 10, 20, or 30 deposition films and cyclodextrin is deposited on top. The cyclodextrin parent-like ions and two fragments were analyzed. A 30 deposition fullerene film enhanced the intensity of cationized cyclodextrin with Na by a factor of 37. While the C₆H₁₁O₅ fragment, corresponding to one glucopyranose unit, increased by a factor of 16. Although fragmentation on fullerene is not suppressed, the intensity is twice as low as the parent-like ion. Deprotonated cyclodextrin increases by 100× and its C₈H₇O fragment by 10×. While the fullerene matrix enhances secondary ion emission, the nanotubes matrix film generates a basically constant yield. Graphite gives rise to lower intensity peaks than either fullerene or nanotubes. Scanning electron microscopy and atomic force microscopy provide images of the fullerene and nanotubes deposition films revealing flat and web structured surfaces, respectively. A “colliding ball” model is presented to provide a plausible physical mechanism of parent-like ion enhancement using the fullerene matrix.     

Synthesis,structure, and aromaticity of a hoop-shaped cyclic benzenoid [10]cyclophenacene

The first hoop-shaped cyclic benzenoid compounds, [10]cyclophenacene derivatives that contain 40 pi electrons, have been synthesized in three or four steps from [60]fullerene by rationally designed chemical modification. The compounds thus synthesized are chemically stable, yellow-colored, luminescent, and EPR-silent. X-ray crystallographic analysis provided high precision structural data sets. On the basis of these results and theoretical investigations, the new cyclic benzenoid molecules were proven to be aromatic.     

The carbon skeleton of the belt region of fullerene C84 (D2)

The synthesis and structural characterization of the double-stranded carbon skeleton in the belt region of a C84 fullerene has been achieved. The synthetic methodology used is based on cyclic dimerization of diastereomeric AB-type monomers 18 by a non-diastereospecific Diels-Alder reaction with isobenzofuran and acenaphthylene groups as reactive termini. Four diasteromeric monomer precursors 17 were prepared for the first time by the use of dihydropyracylene (12) in a multistep synthesis. The synthesis of dihydropyracylene itself has been optimized to the degree that it is now available on the 10 g scale. The belt-shaped macrocycle 19, obtained from dimerization of the monomers 17, could be partly aromatized by an acid-catalyzed dehydration reaction to give 23, which differs from the fully unsaturated belt by two water molecules. Semiempirical AM1 calculations of the electronic and thermodynamic properties of cyclic fluoranthenes revealed strain energy as the essential reason for the incomplete aromatization of 19. The structures of the macrocycles 19 and 23, one of the monomer precursors, and two diastereomeric epoxybenzo[k]fluoranthenes were elucidated by single-crystal X-ray crystallography.     

Light-harvesting supramolecular porphyrin macrocycle accommodating a fullerene-tripodal ligand

Trisporphyrinatozinc(II) (1-Zn) with imidazolyl groups at both ends of the porphyrin self-assembles exclusively into a light-harvesting cyclic trimer (N-(1-Zn)(3)) through complementary coordination of imidazolyl to zinc(II). Because only the two terminal porphyrins in 1-Zn are employed in ring formation, macrocycle N-(1-Zn)(3) leaves three uncoordinated porphyrinatozinc(II) groups as a scaffold that can accommodate ligands into the central pore. A pyridyl tripodal ligand with an appended fullerene connected through an amide linkage (C(60)-Tripod) was synthesized by coupling tripodal ligand 3 with pyrrolidine-modified fullerene, and this ligand was incorporated into N-(1-Zn)(3). The binding constant for C(60)-Tripod in benzonitrile reached the order of 10(8) M(-1). This value is ten times larger than those of pyridyl tetrapodal ligand 2 and tripodal ligand 3. This behavior suggests that the fullerene moiety contributes to enhance the binding of C(60)-Tripod in N-(1-Zn)(3). The fluorescence of N-(1-Zn)(3) was almost completely quenched (approximately 97 %) by complexation with C(60)-Tripod, without any indication of the formation of charge-separated species or a triplet excited state of either porphyrin or fullerene in the transient absorption spectra. These observations are explained by the idea that the fullerene moiety of C(60)-Tripod is in direct contact with the porphyrin planes of N-(1-Zn)(3) through fullerene-porphyrin pi-pi interactions. Thus, C(60)-Tripod is accommodated in N-(1-Zn)(3) with a pi-pi interaction and two pyridyl coordinations. The cooperative interaction achieves a sufficiently high affinity for quantitative and specific introduction of one equivalent of tripodal guest into the antenna ring, even under dilute conditions ( approximately 10(-7) M) in polar solvents such as benzonitrile. Additionally, complete fluorescence quenching of N-(1-Zn)(3) when accommodating C(60)-Tripod demonstrates that all of the excitation energy collected by the nine porphyrins migrates rapidly over the macrocycle and then converges efficiently on the fullerene moiety by electron transfer.     

Electrocatalytic performance of Pt/Ru/Sn/W fullerene electrode for methanol oxidation in direct methanol fuel cell

In this work,fullerene was modified by platinum,ruthenium,tin and tungsten nanoparticles.The material was characterized by XRD,ICP-OES and TEM micrograph.The average nanoparticle size on fullerene was 5-8 nm.The application of this material was investigated as a catalyst for methanol oxidation in direct methanol fuel cell.A glassy carbon electrode was modified by Pt/Ru/Sn/W fullerene and electrocatalytic activity of the electrode toward methanol oxidation in basic medium has been demonstrated and investigated using cyclic voltammetry.The catalyst showed good reactivity for methanol oxidation.     

Synthesis of fullerene-substituted oligo(phenylenebutadiyndiyl)

A diethynylbenzene monomer substituted with two fullerene moieties has been prepared, and its oligomerization performed in the presence of phenylacetylene as end-capping reagent afforded the corresponding end-capped mono- and di-mer with an oligo(phenylenebutadiyndiyl) (OPB) conjugated backbone substituted with two and four fullerene subunits, respectively.     

Rigid dendritic donor-acceptor ensembles: control over energy and electron transduction

Several generations of phenylenevinylene dendrons, covalently attached to a C(60) core, have been developed as synthetic model systems with hierarchical, fine-tuned architectures. End-capping of these dendritic spacers with dibutylaniline or dodecyloxynaphthalene, as antennas/electron donors, yielded new donor-bridge-acceptor ensembles in which one, two, or four donors are allocated at the peripheral positions of the well-defined dendrons, while the electron accepting fullerene is placed at the focal point of the dendron. On the basis of our cyclic voltammetry experiments, which disclose a single anodic oxidation and several cathodic reduction processes, we rule out significant, long-range couplings between the fullerene core and the end-standing donors in their ground-state configuration. Photophysical investigations, on the other hand, show that upon photoexcitation an efficient and rapid transfer of singlet excited-state energy (6 x 10(10) to 2.5 x 10(12) s(-1)) controls the reactivity of the initially excited antenna portion. Spectroscopic and kinetic evidence suggests that yet a second contribution, that is, an intramolecular electron-transfer, exists, affording C(60)(.-) -dendron(.+) with quantum yields (Phi) as high as 0.76 and lifetimes (tau) that are on the order of hundreds of nanoseconds (220-725 ns). Variation of the energy gap modulates the interplay of these two pathways (i.e., competition or sequence between energy and electron transfer).     

Immobilization and electrochemical redox behavior of cytochrome c on fullerene film-modified electrodes

Two different fullerene film-modified electrodes were prepared and used for surface immobilization and electrochemical property investigation of horse heart cytochrome c (cyt c). Both a pristine fullerene film and fullerene-palladium (C(60)-Pd) polymer film-modified platinum, glassy carbon and indium-tin-oxide (ITO) electrodes were used. The immobilized cyt c was characterized by piezoelectric microgravimetry at a quartz crystal microbalance (QCM), UV-visible absorption, and X-ray photoelectron spectroscopy (XPS), as well as cyclic voltammetry (CV) techniques. The UV-visible spectral studies revealed a small blue shift of both the Soret and Q band of the heme moiety of cyt c, immobilized on the C(60)-Pd polymer film-modified ITO electrode, as compared to the bands of cyt c in solution suggesting that molecules of cyt c are densely packed onto the surface of the modified electrode. The CV studies revealed a quasi-reversible electrode behavior of the heme moiety indicating the occurrence of kinetically hindered electron transfer. A good agreement was found between the values of cyt c electrode surface coverage determined by piezoelectric microgravimetry and cyclic voltammetry. For piezoelectric microgravimetry, these values ranged from 0.5 x 10(-10) to 2.5 x 10(-10) mol cm(-2), depending upon the amount of cyt c present in solution and the time allowed for immobilization, which compared with a value of 3.6+/-0.4 x 10(-10) mol cm(-2) determined by CV. The possible mechanisms of cyt c immobilization on the C(60) film and C(60)-Pd film-modified electrodes are also discussed.     

Chlorofullerene C60Cl6: a precursor for straightforward preparation of highly water-soluble polycarboxylic fullerene derivatives active against HIV

We report for the first time the application of chlorofullerene C60Cl6 as a substrate for straightforward preparation of highly water-soluble fullerene derivatives, promising compounds for investigation of the biological action of fullerenes in vitro and in vivo. Methyl esters of phenylacetic and benzylmalonic acids were used as reagents in the Friedel-Crafts arylation of C60Cl6 that resulted in the corresponding C60(Ar)5Cl compounds with 50-60% yields. The following cleavage of ester groups in phenylacetic and benzylmalonic residues was accomplished almost quantitatively to yield the corresponding fullerene-based acids bearing 5 and 10 carboxylic groups, respectively. The relatively-low solubility of these acids in water can be strongly enhanced (up to 150-200 mg ml(-1)) by their conversion to salts with alkali metal cations. These fullerene salt derivatives showed pronounced anti-HIV action and low toxicity; these two findings point to the necessity for further investigation of the biological properties of the here-reported compounds.