四吡唑取代的[Mn_8Ce]簇合物的合成、晶体结构与磁构关系研究

向Mn(O2CCH3)2·4H2O、吡唑和醋酸的乙腈/甲醇溶液中加入(NH4)2Ce(NO3)6得到1个四吡唑取代的[Mn8Ce]混金属簇合物[Mn8O8Ce(O2CCH3)12(pyr)4]·2CH3OH(2·2CH3OH,pyr为吡唑配体),并对其进行单晶结构分析、红外、元素分析和磁性研究。单晶结构研究表明,该化合物属于单斜晶系,P21/c空间群,8个Mn原子形成1个不在同一平面的八元环,然后通过8个μ3-O2-与位于环中心的1个CeⅣ连接起来。磁性研究表明,化合物中Mn3+离子之间是弱的铁磁性作用,基态自旋值S=6,交流磁化率虚部仅显示较微弱的频率依赖现象。通过研究系列[Mn8Ce]簇合物的磁构关系发现,配合物中随着含孤立μ3-O2-的∠MnOMn键角的增大和随着含桥连羧基O的∠MnOMn键角的减小,Mn3+间的铁磁性耦合增强,并进而导致化合物基态自旋值S的增大。     

一个含苯甲酸配体的Mn-Ce混合金属簇合物的合成、晶体结构与磁性研究

本文使用(NH4)2Ce(NO3)6氧化Mn2+法合成了1个结构新颖的Mn-Ce混合金属簇合物[Mn3Ce2(O)5(O2CPh)9(CH3OH)3]·2CH3CN(1.2CH3CN,HO2CPh代表苯甲酸),并对其进行元素分析、红外光谱、单晶X-射线结构分析、磁性等表征。结构分析表明,化合物1.2CH3CN属于三斜晶系P1空间群,结构中2个Mn4+离子、2个Ce4+离子和4个桥连μ3-O原子组成1个不规则的立方烷,然后通过另1个桥连μ3-O原子与另1个Mn3+离子相连。晶胞内分子间没有氢键作用,但存在较强的π-π堆积作用。磁性研究表明,簇合物内Mn离子之间存在铁磁性耦合作用,基态自旋值S=5和磁各向异性参数D=-0.31 cm-1,交流磁化率没有频率依赖现象。     

一种新型顺式异三核金属[Cu-Mn-Cu]配合物合成、晶体结构和磁性

合成了一种新型不对称Schiff碱铜前体配合物KCuL和一种化学组成为[(CuL)2Mn (H2O)2]·0.5CH3OH·0.5CH3OH的顺式异三核配合物,并通过元素分析、IR谱的方法对其进行了表征（其中H3L = N-(2-{[(1E)-(5-氯-2-羟基苯基)亚甲基]胺基}乙基)-2-羟基苯甲酰胺）。利用X-射线单晶衍射方法对三核配合物的晶体结构进行了测定。该三核配合物的每一晶胞单元含有一个顺式中性异三核分子和两个无序的甲醇分子。中心锰离子Mn2+处于O6形成的变形八面体几何构型,而两个配阴离子[CuL]-在Mn2+周围呈顺式排布。磁性表明该三核配合物不仅具有分子内反铁磁作用,而且三核单元之间具有弱的铁磁交换作用,磁参数分别为J = -12.1 cm-1, g = 2.20 and zj¢ = 1.37 cm-1.     

吡啶-2, 6-二[N-(1′-咪唑基丙基)甲酰胺]及其锌(Ⅱ)、镉(Ⅱ)配合物的合成与光谱学研究

以吡啶-2,6-二甲酸为起始原料,经酯化后与N-(3-氨基丙基)咪唑反应合成了有机配体分子吡啶-2,6-二[N-(1'-咪唑基丙基)甲酰胺](L)及其锌(Ⅱ)、镉(Ⅱ)配合物。配体L的结构经1H NMR、13C NMR、IR、UV和元素分析表征,并采用单晶X-射线衍射方法确定了L的晶体结构,L属于正交晶系,Pbcn空间群,晶胞参数a=25.03(2),b=8.933(7),c=20.101(16),α=β=γ=90°,V=4495(6)3,Z=8,Dc=1.287g·cm-3,μ=0.095mm-1,F(000)=1856。通过元素分析确定锌(Ⅱ)、镉(Ⅱ)配合物的组成分别为(C19H23N7O2)2Zn2(ClO4)2·(CH3O)2·2H2O和(C19H23N7O2)2Cd2(ClO4)·(CH3O)3·2H2O,并采用对比分析的方法讨论了配位前后游离配体L和两种配合物的红外吸收光谱和紫外吸收光谱的谱学性质。     

新型大环双核铜配合物[Cu2（H2L）2（SO4）2（H2O）6]·CH3OH·6H2O的合成及其晶体结构与催化性能

H2L[N,N’-二(3-吡啶基)-2,6-吡啶羧酸二酰胺]与CuSO4.5H2O反应合成了新型大环双核铜配合物——[Cu2(H2L)2(SO4)2(H2O)6]·CH3OH·6H2O(1),其结构经IR,XRD和元素分析表征。1属单斜晶系,空间群P21/C,晶胞参数a=26.870(5),b=7.563 7(15),c=28.316(6),α=90°,β=114.91(3)°,γ=90°。1在催化2,6-二甲基苯酚氧化偶联反应时表现出较好的选择性及催化活性。     

一个双核β-二酮镝(Ⅲ)配合物的超声化学合成、晶体结构和磁性(英文)

用超声波辅助的方法合成得到了一个双核β-二酮镝配合物Dy2(Hpdm)2(dbm)4·2EtOH(1)(H2pdm=2,6-吡啶二甲醇,Hdbm=二苯甲酰甲烷)。单晶X-射线衍射结构分析表明双核镝(Ⅲ)结构单元通过2,6-吡啶二甲醇配体中去质子化的羟基氧原子桥联,每个镝(Ⅲ)离子呈现不规则的八面体配位构型。磁学性质研究表明,该配合物中镝(Ⅲ)离子之间存在着反铁磁性耦合作用,但没有出现磁驰豫行为。     

基于磷钼酸和2-(2-羟基苯)苯并咪唑复合物的晶体结构和质子导电性(英文)

以磷钼酸和2-(2-羟基苯)苯并咪唑(L)为原料制备了具有质子导电性的有机-无机化合物[H3L2(PMo12O40)·7H2O·4CH3OH]n(1).单晶X射线衍射分析结果表明化合物1具有基于磷钼酸、2-(2-羟基苯)苯并咪唑及溶剂甲醇分子的二维氢键网络结构;质子导电性能测试结果表明该化合物在100℃、相对湿度为98%时的电导率达到10-4 S·cm-1.     

新型含2,5-二-（3,5-二甲基吡唑-4-巯基）-1,3,4-噻二唑-M(M=Co2+,Cd2+,Mn2+)配合物的合成、晶体结构及其抑菌活性研究

将配体L[2,5-二-(3,5-二甲基吡唑-4-巯基)-1,3,4-噻二唑]与Co(NO3)2 6H2O,Cd(NO3)2 4H2O和MnCl2 4H2O进行配位反应,得到三个配合物[Co(L)2(H2O)4](NO3)2 4(CH3CH2OH)(1),[Cd(L)2(H2O)4](NO3)2 4(CH3CH2OH)(2),[Mn(L)2(Cl)2(CH3OH)2]2(CH3OH)(3),并用元素分析,FT-IR和X射线单晶衍射进行了表征.分析结果表明,配体L呈"U"形,配合物1～3呈"S"形.配合物中Co(II),Cd(II),Mn(II)的配位环境均为扭曲八面体,每个金属离子同时和两个配体进行配位.配体和配合物体外抑菌活性研究结果表明,配体及其配合物都有一定的抑菌活性.     

2,6-吡啶二亚胺基锰(Ⅲ)配合物的合成、晶体结构及催化性能

由三齿含氮配体2,6-二[1-(2,6-二甲基苯基亚胺)乙基]吡啶(L1)、2,6-二[1-(2,6-二乙基苯基亚胺)乙基]吡啶(L2)和2,6-二[1-(2,4,6-三甲基苯基亚胺)乙基]吡啶(L3)分别与MnCl2·4H2O在乙腈中反应,合成了3个新的具有较大空间位阻的2,6-吡啶二亚胺基氯化锰配合物L1Mn(Ⅱ)...     

基于二氰根铬的一系列氰根桥联Cr~Ⅲ-Cu~Ⅱ-Cr~Ⅲ三核配合物的合成、结构与磁性（英文）

基于一系列二氰根铬与[Cu(cyclam)](Cl O4)2反应合成了3个氰根桥联CrⅢ-CuⅡ-CrⅢ三核配合物[Cu(cyclam)][Cr(bpmb)(CN)2]2·4H2O(1)(cyclam=1,4,8,11-四氮杂环十四烷,bpmb2-=1,2-二(2-吡啶甲酰胺基)-4-甲基苯),[Cu(cyclam)][Cr(bpdmb)(CN)2]2(2)(bpdmb2-=1,2-二(2-吡啶甲酰胺基)-4,5-二甲基苯)和[Cu(cyclam)][Cr(bp Clb)(CN)2]2·4H2O(3)(bp Clb2-=1,2-二(2-吡啶甲酰胺基)-4-氯苯)。单晶衍射结果表明:3个化合物是结构类似的中性三核配合物,均含有氰根桥联的Cr(Ⅲ)-CN-Cu(Ⅱ)-NC-Cr(Ⅲ)连接;磁性研究表明:氰根桥在CrⅢ和CuⅡ离子间传递弱的铁磁耦合作用,基于自旋哈密顿算符H=-2JCr CuSCu(SCr1+SCr2)拟合得到它们的磁耦合常数分别是JCr Cu=1.53(2)cm-1(1),0.45(1)cm-1(2)和0.73(2)cm-1(3)。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.