两个2,6-二氨基-3,5-二硝基吡嗪-1-氧化物含能配合物的合成、晶体结构及催化性能

合成了2,6-二氨基-3,5-二硝基吡嗪-1-氧化物(LLM-105)₂种含能配合物[Cu₄O₂(C₄N₆O₅H₂)₂(CH₃COO)₂(DMF)₂]·DMF(1)((C₄N₆O₅H₂)^2- 为配体LLM-105失去2个H⁺)和[Co(C₄N₆O₅H₃)₃]·7H₂O(2)((C₄N₆O₅H₃)^- 为LLM-105失去1个H⁺),用X射线单晶衍射法测定了其分子结构。配合物1属正交晶系,空间群为Pbca,配合物2属三斜晶系,空间群为R3。用DSC,TG-DTG技术对配体和2个配合物的热分解进行了研究。用Kissinger法和Ozawa-Doyle法对配合物热分解过程中放热峰的表观活化能进行了计算。同时研究了2种配合物对AP热分解催化效果的影响,结果表明,2种配合物使AP的高温分解峰温分别提前117.42和71.85℃,分解放热量增加1916.97和1433.76J·g^-1,对AP热分解具有非常显著的催化效果。     

吡啶-2, 6-二[N-(1′-咪唑基丙基)甲酰胺]及其锌(Ⅱ)、镉(Ⅱ)配合物的合成与光谱学研究

以吡啶-2,6-二甲酸为起始原料,经酯化后与N-(3-氨基丙基)咪唑反应合成了有机配体分子吡啶-2,6-二[N-(1'-咪唑基丙基)甲酰胺](L)及其锌(Ⅱ)、镉(Ⅱ)配合物。配体L的结构经1H NMR、13C NMR、IR、UV和元素分析表征,并采用单晶X-射线衍射方法确定了L的晶体结构,L属于正交晶系,Pbcn空间群,晶胞参数a=25.03(2),b=8.933(7),c=20.101(16),α=β=γ=90°,V=4495(6)3,Z=8,Dc=1.287g·cm-3,μ=0.095mm-1,F(000)=1856。通过元素分析确定锌(Ⅱ)、镉(Ⅱ)配合物的组成分别为(C19H23N7O2)2Zn2(ClO4)2·(CH3O)2·2H2O和(C19H23N7O2)2Cd2(ClO4)·(CH3O)3·2H2O,并采用对比分析的方法讨论了配位前后游离配体L和两种配合物的红外吸收光谱和紫外吸收光谱的谱学性质。     

由2-甲基-4-噻唑甲酸构筑的过渡金属配合物的合成、晶体结构及与DNA作用（英文）

以2-甲基-4-噻唑甲酸(HMTZA,C5H5NO2S)为配体合成了3种新型过渡金属配合物[Co(MTZA)2(H2O)2]·3H2O (1),[Cu(MTZA)2(H2O)]·2H2O (2)和[Zn(MTZA)2(H2O)2]·3H2O (3)。对配合物进行了元素分析、红外光谱和热重分析表征,用单晶X射线衍射方法测定了配合物的晶体结构。结果表明,配合物1属于单斜晶系,空间群为P21/n,中心金属Co(Ⅱ)离子的配位数为6,配位构型为略为变形的八面体;配合物2属于三斜晶系,空间群为P1,Cu(Ⅱ)离子的配位构型是一个畸变的四方锥;配合物3属单斜晶系,空间群为P21/n,中心金属Zn(Ⅱ)离子的配位构型为畸变的八面体。用溴化乙锭荧光探针法测定了配体和配合物与DNA作用的荧光光谱,结果显示无论配体还是配合物均能使EB-DNA复合体系发生不同程度的荧光猝灭,且配合物的作用强度远大于配体。     

(—)-2,2'-(2,5-噻吩二甲酰氨基)二丙氨酸和4,4'-联吡啶构筑的铕配位聚合物的水热合成、晶体结构及性质研究

以(—)-2,2'-(2,5-噻吩二甲酰氨基)二丙氨酸(C12H14N2O6S)及4,4'-联吡啶(4,4'-bipy)为配体,在水热条件下合成了铕配位聚合物{[Eu2(C12H12N2O6S)3(4,4'-bipy)(H2O)2]· (H2O)6}n.通过X-射线单晶衍射仪测定其结构,结果表明:晶体为正交晶系,晶胞参数a=1.113992(18) nm,b=1.804 972(19) nm,c=2.933 80(3) nm,Z=4;2个Eu原子分别为九和八配位.测定发现配合物固体具有Eu3+的典型光致发光光谱,配合物中配体能有效提高稀土离子的发光效果.并通过热重分析对配合物进行了热稳定性研究.     

4，4′-二羧基二苯基砜的镧系配合物的合成和结构

合成了V型半刚性配体4,4'-二羧基二苯基砜的3个新的镧系配合物[Nd2(dbsf)3(DMF)225(H2O)1.75·1.25DMF·0.5MeOH(1),[Yb2(dbsf)3(H2O)2]·1.5H2O(2)和[Er2(dbsf)3(H2O)2]·0.75H2O(3)(H2dbsf=4,4'-二羧基二苯基砜,DMF=N,N-二甲基甲酰胺,MeOH=甲醇),并测定了它们的晶体结构.结构表明配合物1具有一维孔道的三维镧系金属,有机骨架结构(LnOF),未配位的DMF和MeOH填充在孔道中;配合物2和3也具有三维的LnOF结构,但晶格水存在于洞穴里.它们的形成与结构特征可能与半刚性V型配体H2dbsf和镧系收缩效应有关.     

离子液体(1-甲基-3-羧甲基咪唑)钴配合物的合成和晶体结构

由离子液体1-甲基-3-羧甲基咪唑硫酸氢盐([C6H9N2O2][HSO4])和氯化钴合成了一种新的配合物[Co(H2O)4(C6H8N2O2)2]Cl2.2H2O;采用单晶X射线衍射方法测定了配合物的晶体结构.结果表明,所合成的配合物C12H28Cl2CoN4O10属于三斜晶系,空间群P-1,a=0.66753(5)nm,b=0.91751(6)nm,c=1.80604(13)nm,α=85.618(5)°,β=83.385(5)°,γ=83.443(5)°,V=1.08934(13)nm3,Z=2,Mr=520.23,F(000)=538,Dc=1.580g.cm-3,μ(Mo-Kα)=1.088mm-1,R1=0.0861,wR2=0.2878.单晶X射线分析结果表明,在所合成的配合物中,每个1-甲基-3-羧甲基咪唑除羧基外其它原子均位于同一平面,咪唑环带正电荷,而羧基氢原子消失;即整个1-甲基-3-羧甲基咪唑分子不带电荷.总体而言,配合物的内界[Co(H2O)4(C6H8N2O2)2]2+带两个正电荷,外界游离的两个氯离子起平衡电荷作用.     

4-(4′-吡啶)-1,3-二硫代环戊烯-2-酮双核铜(Ⅱ)配合物的合成与晶体结构

用溶液法合成了4-(4′-吡啶)-1,3-二硫代环戊烯-2-酮(C8H5NOS2)与铜(Ⅱ)的配合物,并得到了单晶.通过红外光谱、元素分析和X射线单晶衍射分析对配合物的组成和结构进行了表征.X射线单晶衍射分析表明:配合物属三斜晶系,空间群P-1,是由2个CuSO4、4个配体C8H5NOS2分子、2个配位H2O和6个游离的H2O组成的双核配合物.配合物分子通过S…S短程作用形成了1个二维层状结构,并通过分子间的氢键作用进一步形成了更稳定的三维结构.     

(-)-2，2′-(2，5-噻吩二甲酰氨基)二丙氨酸和4，4′-联吡啶构筑的铕配位聚合物的水热合成、晶体结构及性质研究

以(-)-2,2′-(2,5-噻吩二甲酰氨基)二丙氨酸(C12H14N2O6S)及4,4′-联吡啶(4,4′-bipy)为配体,在水热条件下合成了铕配位聚合物{[Eu2(C12H12N2O6S)3(4,4′-bipy)(H2O)2].(H2O)6}n。通过X-射线单晶衍射仪测定其结构,结果表明:晶体为正交晶系,晶胞参数a=1.113 992(18)nm,b=1.804 972(19)nm,c=2.933 80(3)nm,Z=4;2个Eu原子分别为九和八配位。测定发现配合物固体具有Eu3+的典型光致发光光谱,配合物中配体能有效提高稀土离子的发光效果。并通过热重分析对配合物进行了热稳定性研究。     

2-(4’-羧基苯基)咪唑-4,5-二羧酸构筑的稀土(Gd,Dy)MOFs的合成、晶体结构及与DNA作用

由2-(4’-羧基苯基)咪唑-4,5-二羧酸(HCPhIDC,C12H8N2O6,H4L)和稀土硝酸盐合成了两个稀土配合物[Ln(HCPhIDC)(H2O)2]·3H2O(Ln=Gd(1),Dy(2)),通过元素分析、红外光谱对其进行表征,用单晶X射线衍射方法测定了配合物的晶体结构。结构分析表明:两种晶体属于异质同晶型,同属于三斜晶系,空间群为P1,具有(3,6)-双节点的二维(43)(46·66·83)拓扑结构。测定了配体和配合物与EBDNA体系的作用,结果表明:配体本身对DNA的插入作用很强,而在与稀土离子形成配合物以后,其插入作用反而减弱,这是由于配体本身的分子结构具有良好的平面性,可以很好地插入到DNA的双螺旋结构中,当形成配合物后,整个分子的平面性反而降低了,从而导致插入作用减弱,因此猝灭常数大大降低。     

2-苯亚胺官能化吲哚基铕胺基配合物与芳基取代甲脒的反应性（英文）

2-(苯亚胺基次甲基)吲哚铕胺基配合物[η1∶η1-2-(C6H5NH=CH)C8H5N]2Eu[N(Si Me3)2](1)与二芳基取代甲脒(2,6-R2C6H3N=CHNH(C6H3R2-2,6)(R=iPr(2),Me(3))经过配体交换反应,分别得到了含吲哚基脒基铕配合物[η1∶η1-2-(C6H5NH=CH)C8H5N]Eu[(η3-2,6-iPr2C6H3)N=CHN(C6H3iPr2-2,6)][N(Si Me3)2](4)和含脒基的稀土铕配合物[(η3-2,6-Me2C6H3)N=CHN(C6H3Me2-2,6)]2Eu[N(Si Me3)2](5)。结果表明,脒基的位阻显著影响了吲哚基稀土金属胺基配合物与二芳基取代甲脒的配体交换反应。配合物4和5通过IR、元素分析和X射线单晶衍射分析进行了表征。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.