基于锰掺杂量子点的噁喹酸荧光共振能量转移检测研究

基于噁喹酸对锰掺杂硫化锌量子点的荧光猝灭作用,建立了一种噁喹酸荧光共振能量转移检测方法.噁喹酸对量子点的荧光猝灭是由于生成了新的复合物而造成的静态猝灭,二者相互作用过程中焓变ΔH ＜ 0,熵变ΔS ＜ 0,分子间作用力为氢键或范德华力.在0～65 μg/L线性范围内,噁喹酸质量浓度与量子点荧光抑制率呈现良好的线性关系(...     

Oligothiophene Self‐Assembly on the Surface of ZnO Nanorods: Toward Coaxial p–n Hybrid Heterojunctions

We describe herein the design, synthesis and detailed structural characterization of hybrid 1D nanostructures. They are prepared by supramolecular self‐assembly of oligothiophene molecules on the surface of zinc oxide nanorods in solution at room temperature. Electronic absorption spectroscopy and X‐ray diffraction show that both organic and inorganic components in the coaxial p–n heterojunctions are crystalline. Especially, it is demonstrated that the organic compounds form a self‐assembled monolayer at the surface of the nanorods, which is not the case when zinc oxide quantum dots are instead used. As a result of their hybrid nature, the 1D nanostructures lead to ambipolar semiconducting nanostructured materials as active layers in field‐effect transistors.     

Ab initio quantum mechanical study of the binding energies of human estrogen receptor alpha with its ligands: an application of fragment molecular orbital method

We have theoretically examined the relative binding affinities (RBA) of typical ligands, 17beta-estradiol (EST), 17alpha-estradiol (ESTA), genistein (GEN), raloxifene (RAL), 4-hydroxytamoxifen (OHT), tamoxifen (TAM), clomifene (CLO), 4-hydroxyclomifene (OHC), diethylstilbestrol (DES), bisphenol A (BISA), and bisphenol F (BISF), to the alpha-subtype of the human estrogen receptor ligand-binding domain (hERalpha LBD), by calculating their binding energies. The ab initio fragment molecular orbital (FMO) method, which we have recently proposed for the calculations of macromolecules such as proteins, was applied at the HF/STO-3G level. The receptor protein was primarily modeled by 50 amino acid residues surrounding the ligand. The number of atoms in these model complexes is about 850, including hydrogen atoms. For the complexes with EST, RAL, OHT, and DES, the binding energies were calculated again with the entire ERalphaLBD consisting of 241 residues or about 4000 atoms. No significant difference was found in the calculated binding energies between the model and the real protein complexes. This indicates that the binding between the protein and its ligands is well characterized by the model protein with the 50 residues. The calculated binding energies relative to EST were very well correlated with the experimental RBA (the correlation coefficient r=0.837) for the ligands studied in this work. We also found that the charge transfer between ER and ligands is significant on ER-ligand binding. To our knowledge, this is the first achievement of ab initio quantum mechanical calculations of large molecules such as the entire ERalphaLBD protein.     

Characterization and Polymerization of Thienylphenyl and Selenylphenyl Amines and Their Interaction with CdSe Quantum Dots

Hybrid quantum‐dot‐sensitized solar cells show promising novel optoelectronic properties. An adequate design of such cells requires a deep understanding of the characteristics of each component, including their interactions. In this context, the electrochemical properties of two different hole‐transporting materials (HTMs) and their chemical interactions with trioctylphosphine‐capped CdSe quantum dots are investigated to evaluate their potential use in hybrid quantum‐dot‐sensitized solar cells. Tris[4‐(thien‐2‐yl)phenyl]amine (TTPA) and tris[4‐(selen‐2‐yl)phenyl]amine (TSePA) are studied in the solid state as thin films deposited on a conducting substrate. Spectroelectrochemical studies evidence both solid‐state electropolymerization and doping. Upon addition of TSePA or partially polymerized TTPA to a colloidal solution of trioctylphosphine‐capped CdSe quantum dots, the steady‐state photoluminescence is quenched. This suggests that the quantum dots and the HTM strongly interact, probably through an excited‐state charge‐transfer mechanism. The combination of all these pieces of information indicates that polymerized TTPA and TSePA are potential candidates as HTMs for hybrid quantum‐dot‐sensitized solar cells.     

Self-Assembled Monolayers of Molecular Conductors with Terpyridine-Metal Redox Switching Elements: A Combined AFM,STM and Electrochemical Study

Self-assembled monolayers (SAMs) of terpyridine-based transition metal (ruthenium and osmium) complexes, anchored to gold substrate via tripodal anchoring groups, have been investigated as possible redox switching elements for molecular electronics. An electrochemical study was complemented by atomic force microscopy (AFM) and scanning tunneling microscopy (STM) methods. STM was used for determination of the SAM conductance values, and computation of the attenuation factor β from tunneling current–distance curves. We have shown that SAMs of Os-tripod molecules contain larger adlayer structures compared with SAMs of Ru-tripod molecules, which are characterized by a large number of almost evenly distributed small islands. Furthermore, upon cyclic voltammetric experimentation, Os-tripod films rearrange to form a smaller number of even larger islands, reminiscent of the Ostwald ripening process. Os-tripod SAMs displayed a higher surface concentration of molecules and lower conductance compared with Ru-tripod SAMs. The attenuation factor of Os-tripod films changed dramatically, upon electrochemical cycling, to a higher value. These observations are in accordance with previously reported electron transfer kinetics studies.     

Rapid,single-step nucleic acid detection

A rapid detection method for nucleic acid based on bioluminescence resonance energy transfer (BRET) from the luminescence donor Renilla luciferase to an acceptor quantum dot upon oligonucleotide probe hybridization has been developed. Utilizing a competitive assay, we detected the target nucleic acid by correlating the BRET signal with the amount of target present in the sample. This method allows for the detection of as little as 4 pmol (20 nM) of nucleic acid in a single-step, homogeneous format both in vitro in a buffer matrix as well as in a cellular matrix. Using this method, one may perform nucleic acid detection in as little as 30 min, showing much improvement over time-consuming blotting methods and solid-phase methods which require multiple wash steps to remove unbound probe. This is the first report on the use of quantum dots as a BRET acceptor in the development of a nucleic acid hybridization assay. An erratum to this article can be found at     

Surface Chemistry Studies of Quantum Dots (QDs) Modified with Surfactants

Since luminescent CdSe quantum dots (QDs) have shown great potential in biological labeling, the surface chemistry behavior of QDs at interfaces is of great research interest. In the present study, CdSe QDs with green luminescence were modified with hydrophobic chains of varying lengths [from C6 to C18]. These modified QDs can be utilized to form stable monolayers at the air/water interface. Surface pressure-area isotherms of modified QDs have been measured and limiting molecular areas have also been extrapolated in order to analyze the size of the QDs. UV absorption spectra of modified QDs at various surface pressures were also determined. Surface chemistry, as well as the topographic properties, of modified QDs in Langmuir and L-B films was discussed.     

The Emerging Use of Quantum Dots in Analysis

Abstract

The optical properties of quantum dots (QDs) have made them attractive materials in diverse fields of application. Since water‐soluble derivatives were obtained, quantum dots have attracted intensive research interest in sensing, diagnosis, imaging, and optical tracking. The analytes that have been targeted span ions, small chemical molecules, proteins, nucleic acids, and cells. The fluorescence of functionalized QDs can be quenched, enhanced, or even ‘switch’ on and off in different cases. However, the mechanisms behind these various responses are not yet all fully understood. This review gives an overview of the emerging use of QDs in analysis. Typical examples, in particular in relation to the discussion on mechanisms are highlighted.     

Physics and engineering of peptide supramolecular nanostructures

The emerging "bottom-up" nanotechnology reveals a new field of bioinspired nanomaterials composed of chemically synthesized biomolecules. They are formed from elementary constituents in supramolecular structures by the use of a developed nature self-assembly mechanism. The focus of this perspective paper is on intrinsic fundamental physical properties of bioinspired peptide nanostructures and their small building units linked by weak noncovalent bonds. The observed exceptional optical properties indicate a phenomenon of quantum confinement in these supramolecular structures, which originates from nanoscale size of their elementary building blocks. The dimensionality of the confinement gives insight into intrinsic packing of peptide supramolecular nanomaterials. QC regions, revealed in bioinspired nanostructures, were found by us in amyloid fibrils formed from insulin protein. We describe ferroelectric and related properties found at the nanoscale based on original crystalline asymmetry of the nanoscale building blocks, packing these structures. In this context, we reveal a classic solid state physics phenomenon such as reconstructive phase transition observed in bioorganic peptide nanotubes. This irreversible phase transformation leads to drastic reshaping of their quantum structure from quantum dots to quantum wells, which is followed by variation of their space group symmetry from asymmetric to symmetric. We show that the supramolecular origin of these bioinspired nanomaterials provides them a unique chance to be disassembled into elementary building block peptide nanodots of 1-2 nm size possessing unique electronic, optical and ferroelectric properties. These multifunctional nanounits could lead to a new future step in nanotechnology and nanoscale advanced devices in the fields of nanophotonics, nanobiomedicine, nanobiopiezotronics, etc.     

Luminescence of Hybrid Nanostructures of InP@ZnS Colloidal Quantum Dots and <Emphasis Type="Italic">meso</Emphasis>-Tetra(3-pyridyl)porphyrin Molecules

The formation of hybrid nanostructures consisting of InP@ZnS colloidal quantum dots and mesotetra(3-pyridyl)porphyrin molecules adsorbed on the quantum dots has been studied. In such nanostructures, strong quenching of quantum dot luminescence and an increase in the emission intensity of porphyrin are observed due to nonradiative resonance energy transfer from colloidal quantum dots to porphyrin.     

In‐capillary probing of quantum dots and fluorescent protein self‐assembly and displacement using Förster resonance energy transfer

Herein, a Förster resonance energy transfer system was designed, which consisted of CdSe/ZnS quantum dots donor and mCherry fluorescent protein acceptor. The quantum dots and the mCherry proteins were conjugated to permit Förster resonance energy transfer. Capillary electrophoresis with fluorescence detection was used for the analyses for the described system. The quantum dots and mCherry were sequentially injected into the capillary, while the real‐time fluorescence signal of donor and acceptor was simultaneously monitored by two channels with fixed wavelength detectors. An effective separation of complexes from free donor and acceptor was achieved. Results showed quantum dots and hexahistidine tagged mCherry had high affinity and the assembly was affected by His₆‐mCherry/quantum dot molar ratio. The kinetics of the self‐assembly was calculated using the Hill equation. The microscopic dissociation constant values for out of‐ and in‐capillary assays were 10.49 and 23.39 μM, respectively. The capillary electrophoresis with fluorescence detection that monitored ligands competition assay further delineated the different binding capacities of histidine containing peptide ligands for binding sites on quantum dots. This work demonstrated a novel approach for the improvement of Förster resonance energy transfer for higher efficiency, increased sensitivity, intuitionistic observation, and low sample requirements of the in‐capillary probing system.     

Beyond labels: A review of the application of quantum dots as integrated components of assays, bioprobes, and biosensors utilizing optical transduction

A comprehensive review of the development of assays, bioprobes, and biosensors using quantum dots (QDs) as integrated components is presented. In contrast to a QD that is selectively introduced as a label, an integrated QD is one that is present in a system throughout a bioanalysis, and simultaneously has a role in transduction and as a scaffold for biorecognition. Through a diverse array of coatings and bioconjugation strategies, it is possible to use QDs as a scaffold for biorecognition events. The modulation of QD luminescence provides the opportunity for the transduction of these events via fluorescence resonance energy transfer (FRET), bioluminescence resonance energy transfer (BRET), charge transfer quenching, and electrochemiluminescence (ECL). An overview of the basic concepts and principles underlying the use of QDs with each of these transduction methods is provided, along with many examples of their application in biological sensing. The latter include: the detection of small molecules using enzyme-linked methods, or using aptamers as affinity probes; the detection of proteins via immunoassays or aptamers; nucleic acid hybridization assays; and assays for protease or nuclease activity. Strategies for multiplexed detection are highlighted among these examples. Although the majority of developments to date have been in vitro, QD-based methods for ex vivo biological sensing are emerging. Some special attention is given to the development of solid-phase assays, which offer certain advantages over their solution-phase counterparts.     

Functional Carbon Quantum Dots: A Versatile Platform for Chemosensing and Biosensing

Carbon quantum dot has emerged as a new promising fluorescent nanomaterial due to its excellent optical properties, outstanding biocompatibility and accessible fabrication methods, and has shown huge application perspective in a variety of areas, especially in chemosensing and biosensing applications. In this personal account, we give a brief overview of carbon quantum dots from its origin and preparation methods, present some advance on fluorescence origin of carbon quantum dots, and focus on development of chemosensors and biosensors based on functional carbon quantum dots. Comprehensive advances on functional carbon quantum dots as a versatile platform for sensing from our group are included and summarized as well as some typical examples from the other groups. The biosensing applications of functional carbon quantum dots are highlighted from selective assays of enzyme activity to fluorescent identification of cancer cells and bacteria.     

Observation of enhanced energy transfer in individual quantum dot-oligophenylene vinylene nanostructures

The temporal and spectral properties of luminescence from individual CdSe quantum dot-oligophenylene vinylene nanostructures (single quantum dots with conjugated organic ligands coordinated to the surface) are profoundly modified relative to blended films of the same components. These kinds of composite quantum dot-conjugated organic systems have attracted significant interest as a way to improve efficiency in photovoltaic device applications. By direct functionalization of the dot surface with the conjugated organic ligands, we realize a significant enhancement in energy transfer and luminescence stability.     

表面引发聚合反应研究进展

表面引发聚合反应作为一种新的聚合反应可广泛应用于固体基底的表面修饰与改性。结合分子自组装技术,几乎各种类型的聚合反应都有可能在固体基底表面进行。本文对表面引发聚合反应的研究进展进行了综述,对反应类型、实验方法、研究动向以及在合成聚合物刷、形成图案化聚合物薄膜等方面的应用与发展前景作了介绍与讨论。     

温度控制TiO2纳米管及管/线复合阵列的制备

以含有NH4F的乙二醇溶液为电解液,在宽温度范围内(10~70℃)对纯Ti表面进行阳极氧化,制得形貌可控的TiO2纳米结构。利用场发射扫描电子显微镜(FESEM)和透射电镜(TEM)对纳米TiO2的形貌进行表征。结果表明,随着电解液温度的变化,纳米TiO2的形貌得到控制,可形成TiO2纳米管阵列及纳米管阵列/纳米线复合结构,温度40~50℃为转折温区。     

In pursuit of key features for constructing electrochemical biosensors – electrochemical and acid-base characteristic of self-assembled monolayers on gold

ABSTRACT

Electrochemical biosensors are a well-known group of tools used widely in a variety of industries. Due to interactions between analytes and a surface, a measurable signal occurs which can then be processed to quantitative and/or qualitative data. The knowledge of surfaces’ electrochemical properties as well as their pK_a is of great importance when it comes to the construction of biosensors based on an electrochemical signal. In our work, we focused on determining electrochemical properties as well as pK_a of thiol-based SAMs – commonly used linker layers in biosensors. By applying cyclic voltammetry and electrochemical spectroscopy we were able to describe the overall resistive behaviour of SAMs synthesised with both alkanethiols and thiols with carboxyl and amine groups. Coherent use of contact angle measurements let us also describe the overall polarity of the investigated surfaces. The obtained data of pK_a values differed from the ones described for bulk solutions of modifying agents, which yields important information for further modification of the surface.     

CuInS2量子点敏化太阳能电池中尺寸依赖的电子注入和光电性质

研究了CuInS₂（CIS）量子点敏化太阳能电池（QDSSCs）的电子注入和器件性能与粒子尺寸之间的依赖关系. 首先合成了不同尺寸的CuInS₂量子点（QDs）,制备了CuInS₂量子点敏化的TiO₂薄膜,并组装了量子点敏化太阳能电池. 通过循环伏安法确定了CuInS₂量子点的能级位置. 采用时间分辨荧光光谱分析测量了CuInS₂量子点到TiO₂薄膜的电子转移速率和效率. 结果发现,随着粒子尺寸从4.0 nm减小到2.5 nm,电子注入速率略微增加而电子注入效率减小,同时量子点敏化太阳能电池的开路电压基本不变,而光电转换效率、短路电流和填充因子（FF）均减小. 上述研究结果表明量子点敏化太阳能电池性能的优化可以通过改变量子点的尺寸来实现.     

Theoretical Study on the Hydrogen Bonding Interactions in Complexes of 5‐Hydroxytryptamine with Water

The energies, geometries and harmonic vibrational frequencies of 1:1 5‐hydroxytryptamine‐water (5‐HT‐H₂O) complexes are studied at the MP2/6‐311++G(d,p) level. Natural bond orbital (NBO), quantum theory of atoms in molecules (QTAIM) analyses and the localized molecular orbital energy decomposition analysis (LMO‐EDA) were performed to explore the nature of the hydrogen‐bonding interactions in these complexes. Various types of hydrogen bonds (H‐bonds) are formed in these 5‐HT‐H₂O complexes. The intermolecular C4H5^5‐HT···O^w H‐bond in HTW3 is strengthened due to the cooperativity, whereas no such cooperativity is found in the other 5‐HT‐H₂O complexes. H‐bond in which nitrogen atom of amino in 5‐HT acted as proton donors was stronger than other H‐bonds. Our researches show that the hydrogen bonding interaction plays a vital role on the relative stabilities of 5‐HT‐H₂O complexes.     

Designing a 0D/1D S-Scheme Heterojunction of Cadmium Selenide and Polymeric Carbon Nitride for Photocatalytic Water Splitting and Carbon Dioxide Reduction

Constructing photocatalysts to promote hydrogen evolution and carbon dioxide photoreduction into solar fuels is of vital importance. The design and establishment of an S-scheme heterojunction system is one of the most feasible approaches to facilitate the separation and transfer of photogenerated charge carriers and obtain powerful photoredox capabilities for boosting photocatalytic performance. Herein, a zero-dimensional/one-dimensional S-scheme heterojunction composed of CdSe quantum dots and polymeric carbon nitride nanorods (CdSe/CN) is created and constructed via a linker-assisted hybridization approach. The CdSe/CN composites exhibit superior photocatalytic activity in water splitting and promoted carbon dioxide conversion performance compared with CN nanorods and CdSe quantum dots. The best efficiency in photocatalytic water splitting (10.2% apparent quantum yield at 420 nm irradiation, 20.1 mmol g⁻¹ h⁻¹ hydrogen evolution rate) and CO₂ reduction (0.77 mmol g⁻¹ h⁻¹ CO production rate) was achieved by 5%CdSe/CN composites. The significantly improved photocatalytic reactivity of CdSe/CN composites primarily originates from the emergence of an internal electric field in the zero-dimensional/one-dimensional S-scheme heterojunction, which could greatly improve the photoinduced charge-carrier separation. This work underlines the possibility of employing polymeric carbon nitride nanostructures as appropriate platforms to establish highly active S-scheme heterojunction photocatalysts for solar fuel production.