Preparation of reversibly photo-cross-linked nanogels from pH-responsive block copolymers and use as nanoreactors for the synthesis of gold nanoparticles

Reversibly photo-cross-linkable pH-responsive block copolymer poly(ethylene oxide)-b-poly((2-(diethylamino)ethyl methacrylate-co-4-methyl-[7-(methacryloyl)oxyethyloxy] coumarin)) (PEO-b-P(DEA-co-CMA)) was synthesized via atom transfer radical polymerization (ATRP). Block copolymer nanogels could be easily prepared by first photo-cross-linking of the micelles at pH > 7 and then adjusting the solution to pH < 7. The photo-cross-linking was proved to be reversibly controlled under alternative irradiation of UV light at 365 nm and 254 nm. As a result, the cross-linking degrees and sizes of the nanogels can be easily controlled by alternatively UV light irradiation. Finally, the nanogels can serve as nanoreactors for the synthesis of gold nanoparticles. The protonated DEA units were first coordinated with HAuCl₄, and then the electrostatically bounded AuCl⁴⁻ anions were reduced to gold nanoparticles by NaBH₄. The nanogel-supported gold nanoparticles were used in chemical catalysis. The pH-responsive photo-cross-linked nanogels have been characterized using dynamic light scattering, transmission electron microscopy, UV-vis spectra and ¹H NMR spectroscopy measurements, respectively.     

Cobalt nanoparticles in block copolymer micelles: Preparation and properties

 The preparation and properties of Co nanoparticles in polystyrene(PS)-poly-4-vinyl-py-ridine(PVP) micelles were studied. Elementary Co was generated by two methods: (i) by reduction of micelles loaded with CoCl₂, and (ii) by thermal decomposition of Co₂(CO)₈ in micel-lar solutions of such block copolymers. Co particles formed by both processes are effectively stabilized by the block copolymer matrix and do not aggregate. For CoCl₂ as a Co-source, the formed particles have a size less than 1 nm. Thermal treatment of such dried polymers at 200 ^°C for 2 h leads to spherical particles of 3–5 nm in size. The polymeric hybrid materials prepared in this way display remarkably high values of magnetization at rather low Co contents in the polymer, i.e., we obtain a tenfold increase of the specific magnetization density. Co₂(CO)₈ as a Co source, results in a more complex behavior. Co₂(CO)₈ dissolves in the solvent as well as in the micelle core where it is converted to an cationic–anionic complex involving the 4-VP units. The shape and size of the Co nanoparticles formed by thermolysis can be controlled by the balance of 4-VP/Co and can be varied from spherical particles in the limit of lower Co loads being mainly attached to the micelle core to a star-like and cubic morphology in case of excess of Co₂(CO)₈. Both superparamagnetic and ferromagnetic materials can be prepared. For ferromagnetic samples coercive force varies from 250 to 475 Oe depending on Co content and polymer sample. Received : 27 September 1996 Accepted: 22 November 1996     

Supramolecular assemblies of block copolymers as templates for fabrication of nanomaterials

Self-assembled polymeric systems have played an important role as templates for nanofabrication; they offer nanotemplates with different morphologies and tunable sizes, are easily removed after reactions, and could be further modified with different functional groups to enhance the interactions. Among the various self-assembled polymeric systems, block copolymer supramolecular assemblies have received considerable attention because of the inherent processing advantages. These supramolecular assemblies are formed by the non-covalent interactions of one of the blocks of the block copolymer with a low molar-mass additive. Selective extraction of the additive leads to porous membranes or nano-objects which could then be used as templates for nanofabrication leading to a variety of ordered organic/inorganic nanostructures. In this feature article, we present an over-view of the recent developments in this area with a special focus on some examples from our group.     

Control of nucleation and growth of gold nanoparticles in AOT/Span80/isooctane mixed reverse micelles

In this study, we demonstrate that mixed reverse micelles are good candidates to be used as nanoreactors for formation of shape-controlled high-quality colloidal nanocrystals and nanowires under mild conditions. Manipulation of the rate of nucleation and subsequent growth of the Au in the mixed reverse micelles induce drastic changes in the particle shape and structure. Here we demonstrate that control of the nucleation and growth kinetics of the Au in the mixed reverse micelles can be used to vary the shapes of the resulting particles from a nearly spherical morphology to cylinders, trigons and cubics. The characterization of the resultant particles, the effects of synthesis conditions (such as concentration of NaCl, addition of glycerol, and reaction temperature) on particle sizes, particle size distribution, and shape of particle formation have been investigated. This study will help us to understand the chemical control synthesis of crystal growth processes at the atomic level.     

Structural effects of amphiphilic block copolymers on the gold nanoplates synthesis. Experimental and theoretical study

Geometric and multi-arms gold nanoplates were synthesized by direct reaction between two different amphiphilic block copolymers and KAuCl₄ in aqueous solution. Amphiphilic copolymers containing blocks of ε-caprolactone and N-vinyl-2-pyrrolidone were used. The block copolymer structures and concentration play a key role on the morphology and size of gold nanoparticles. Copolymers have a dual function as reductant and stabilizer agent. The gold nanoparticles obtained were characterized by transmission electron microscopy (TEM), UV–visible spectroscopy (UV–vis) and dynamic light scattering (DLS). On the other hand, electronic structure calculations, based on density functional theory were performed to support the experimental results. The simple models built with small clusters of gold and co-monomer units provide planar structures complexes with higher stabilization energies. These results agree with the nanoplates obtained experimentally. Moreover, the reactivity analysis based on monoelectronic properties suggests that the formation of aggregates between complexes is favored.     

各向异性金纳米粒子的制备及其在催化中的应用

尽管有关金纳米粒子催化的研究工作很多,但其中大多数都是采用传统的浸渍法将金盐负载到载体上、共沉淀或沉积-沉淀法制得负载的纳米粒子,但这些方法并未吸收最新的纳米技术。最近,金催化剂的研究者开发了在胶态悬浮液中制取金属纳米粒子,然后进行固载,从而使得单金属和双金属催化剂的催化活性和形貌控制取得较大进展。另一方面,最近十年出现了金纳米粒子合成的高级控制技术,得到了许多各向异性的金纳米粒子,且很容易制得新的形貌,可以控制纳米粒子的表面原子配位数和光学特性(可调的等离子体带),这些都与催化密切相关。这些形貌包括纳米棒、纳米星、纳米花、树枝状纳米结构或多面体纳米粒子等。除了高度关注各向异性金纳米粒子的最新开发的制备方法和性质,本综述也清楚地总结了这些纳米粒子独特的催化性能,以及通过提供更高催化性能的金催化剂、控制暴露的活性位,以及热、电和光催化的鲁棒性和可调性,从而给多相催化领域带来令人惊奇的潜在变革。     

Dissipative particle dynamics simulation of gold nanoparticles stabilization by PEO–PPO–PEO block copolymer micelles

Dissipative particle dynamics (DPD) was used to simulate the formation and stabilization of gold nanoparticles in poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) (PEO–PPO–PEO) block copolymer micelles. Primary gold clusters that were experimentally observed in the early stage of gold nanoparticle formation were modeled as gold bead in DPD simulation. It showed that gold beads were wrapped by the block copolymer and aggregated into spherical particles inside the micelles and forming stable Pluronic–gold colloids with two-layer structures. Increasing Pluronic concentration, molecular weight, and PPO block length led to the formation of more uniform and more stable gold nanoparticles. Density profiles of water beads suggested that the micelles, especially the hydrophobicity of the micellar cores, played an important role in stabilizing gold nanoparticles. Dynamic process indicated that the formation of gold nanoparticles was controlled by the competition between aggregation of primary gold clusters and the stabilization by micelles of block copolymers.. The DPD simulation results of gold–copolymer–water system agree well with previous experiments, while more structure information on microscopic level could be provided.     

Plant-assisted synthesis of gold nanoparticles for photocatalytic,anticancer, and antioxidant applications

The current study is the first to disclose a quick, cost-effective, and environmentally safe phytofabrication of gold nanoparticles (AuNPs) that remained stable for three months utilizing the aqueous extract of T. capensis leaves to uphold the principles of green chemistry such as less hazardous chemical syntheses, safer solvents and auxiliaries, design for energy efficiency, and use of renewable feedstocks. Several approaches were used to describe T. capensis-AuNPs, with the findings revealing the successful phytoformation of crystalline AuNPs with a dark brown color, spherical nanoparticles with a size range of 10–35 nm, a surface plasmon peak at 515 nm, and a surface charge of ? 24.5 mV. T. capensis-AuNPs showed 72% photodegradation efficacy against malachite green. The MTT experiment revealed that T. capensis-AuNPs and T. capensis extract had excellent potency in preventing the development and proliferation of human breast cancer cells (MCF7 cell line), with IC50 values of 9.6 g/mL and 23.3 g/mL, respectively. Both T. capensis-AuNPs and T. capensis extract had significant antioxidant efficacies, with DPPH scavenging percentages of 70.73% for T. capensis-AuNPs and 85.62% for T. capensis extract. Consequently, these findings suggest a new and sustainable route for the green synthesis of AuNPs using the aqueous extract of T. capensis.     

Interactions of amphiphilic block copolymers with lipid model membranes

Studies on interactions between amphiphilic block copolymers and lipid membranes have been focused traditionally on ABA triblock copolymers of poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide), widely due to their commercial availability. However, new architectures of amphiphilic block copolymer have been synthesized in recent years partially taking advantage of new polymerization techniques. This review focuses on amphiphilic block copolymers with potential biological activity and on model membrane systems used for studying interactions with such block copolymers. Experimental methods to study block copolymer–phospholipid interactions in Langmuir monolayers, liposomes, and planar bilayers are summarized. This work is intended to convey a better understanding of amphiphilic block copolymers used for in vitro and in vivo experiments in medicine and pharmacy. Recent developments and open questions are addressed.     

Block copolymers in the synthesis of gold nanoparticles. Two new approaches: Copolymer aggregates as reductants and stabilizers and simultaneous formation of copolymer aggregates and gold nanoparticles

In this article, innovative applications of amphiphilic triblock and pentablock copolymers in the synthesis of gold nanoparticles are reported. The synthesis of gold nanoparticles is performed using two methods. In the first method, micellar aggregates of block copolymers and AuCl₄^? ions directly react in water; the nanoparticles obtained by this method are variable in size and are associated with copolymer aggregates. In the second method, two processes take place simultaneously: the aggregation of block copolymers and the reduction of Au (III) by the copolymers to form nanoparticles. In contrast with the first method, in this case, the nanoparticles obtained are located inside the copolymer aggregates. In both methods of synthesis, the block copolymers act simultaneously as reducing and stabilizing agents. To understand the role of copolymer aggregates in the synthesis of nanoparticles, molecular simulation methods are used. The gold nanoparticles, copolymer aggregates, and nanocomposite systems are characterized using transmission electron microscopy and dynamic light scattering. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3069–3079     

金纳米粒子的表面修饰及生物应用进展

近年来纳米材料被广泛应用于生物医学、航空航天和精细化工等领域。构成纳米材料的纳米粒子具有小尺寸效应、表面效应和宏观量子隧道效应等性质。其中金纳米粒子由于其独特的荧光特性、良好的生物相容性和表面等离子共振等性质,被广大科研人员进行深入研究。例如,在生物医学领域,科研人员构建了一系列新型的金纳米比色传感器、光学探针及各类载药体系等。然而,目前金纳米粒子仍存在水分散性差、肾清除效率低和量子发射产率低等问题,限制了其广泛应用。因此,研究人员对金纳米粒子表面进行多样化修饰,从而能有效克服上述缺点。本文就目前主流配体表面修饰金纳米粒子的研究进展进行了详细总结,着重介绍了功能化金纳米粒子在生物成像、生物检测、生物治疗三方面的应用,最后对金纳米粒子的临床治疗机制的探索以及商业化的应用进行了展望,希望能为相关领域的研究者们提供新思路。     

Block copolymer micelles as nanoreactors for single‐site polymerization catalysts

New micelle‐like organic supports for single site catalysts based on the self‐assembly of polystyrene‐b‐poly(4‐vinylbenzoic acid) block copolymers have been designed. These block copolymers were synthesized by sequential atom transfer radical polymerization (ATRP) of styrene and methyl 4‐vinylbenzoate, followed by hydrolysis. As evidenced by dynamic light scattering, self‐assembly in toluene that is a selective solvent of polystyrene, induced the formation of micelle‐like nanoparticles composed of a poly(4‐vinylbenzoic acid) core and a polystyrene corona. Further addition of trimethylaluminium (TMA) afforded in situ MAO‐like species by diffusion of TMA into the core of the micelles and its subsequent reaction with the benzoic acid groups. Such reactive micelles then served as nanoreactors, MAO‐like species being efficient activators of 2,6‐bis[1‐{(2,6‐diisopropylphenyl)imino}ethyl]pyridinyl iron toward ethylene polymerization. These new micelle‐like organic supports enabled the production of polyethylene beads with a spherical morphology and a high bulk density through homogeneous‐like catalysis. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 197–209, 2009     

Concentrated reverse micelles in a random graft block copolymer system: structure and in-situ synthesis of silver nanoparticles

The structure and rheological properties of a poly(dimethylsiloxane)-graft-poly(oxyethylene) copolymer at high concentrations in block-selective solvents were studied by small-angle X-ray scattering (SAXS) and rheometry. Analysis of SAXS data indicates that quasispherical, reverse micellar aggregates (with no ordered packing) are present in concentrated solutions of the copolymer in nonpolar solvents, and that upon addition of water, the size of such aggregates increases due to the solubilization inside the micellar cores. The viscosity of concentrated polymer solutions increases exponentially as water is added, and finally, viscoelastic, gel-like behavior is found in the vicinity of the phase separation limit. It was found that small silver nanoparticles with an average diameter of ≈3 nm can be synthesized inside the copolymer aggregates without the need of a reducing agent; namely, particles embedded in a viscoelastic matrix are obtained. The synthesis seems to follow first-order kinetics. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Biogenic synthesis of gold and silver nanoparticles used in environmental applications: A review

Due to their physical, chemical, optical, and mechanical properties, metallic nanoparticles (MNPs) are increasingly being used, with an emphasis on silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs). In recent years, green synthesis has gained prominence for exploring the use of naturally available biological sources for the obtention of metallic nanoparticles. Among these, algae and plants stand out due to the presence of polysaccharides, proteins, polyphenols, and vitamins (among others) in their composition, which can act in the reduction and stabilisation of MNPs, and these biogenic materials have been characterised mainly by spectrometric and microscopic techniques. In addition, due to the numerous advantages of nanoparticles (NPs) synthetize from biogenic source, such as their simplicity and cost benefits, they have been used in the development of sensors applied in the determination of contaminants present in environmental samples and in the catalytic reduction of organic and inorganic contaminants. Therefore, this review describes the synthesis, mechanisms, characterization, and environmental analytical applications of NPs obtained by biogenic synthesis as well as the perspectives and challenges of these NPs.     

Lipid,protein and poly(NIPAM) coated mesoporous silica nanoparticles for biomedical applications

In the past decade, mesoporous silica nanoparticles (MSNs) as nanocarriers have showed much potential in advanced nanomaterials due to their large surface area and pore volume. Especially, more and more MSNs based nanodevices have been designed as efficient drug delivery systems (DDSs) or biosensors. In this paper, lipid, protein and poly(NIPAM) coated MSNs are reviewed from the preparation, properties and their potential application. We also introduce the preparative methods including physical adsorption, covalent binding and self-assembly on the MSNs' surfaces. Furthermore, the interaction between the aimed cells and these molecular modified MSNs is discussed. We also demonstrate their typical applications, such as photodynamic therapy, bioimaging, controlled release and selective recognition in biomedical field.     

Colloidal AgCl induced-growth of thorny gold nanoparticles and their SERS activity

In this paper, we exploited a unique procedure for obtaining thorny gold nanoparticles (Au NPs) with controllable length of thorns without using seeds and surfactants. The obtained Au NPs exhibited shape-determined surface-enhanced Raman spectroscopy activity toward rhodamine 6G.     

Star-block copolymers as templates for the preparation of stable gold nanoparticles

Gold nanoparticles of improved stability against aggregation were prepared using poly(ethylene oxide)-block-poly(epsilon-caprolactone) (PEO-b-PCL) star-block copolymers. A five-arm star-shaped macroinitiator (PEO) was utilized for the automated parallel controlled ring-opening polymerization of epsilon-caprolactone to prepare a series of PEO-b-PCL star-block copolymers with a constant PEO core linked to PCL blocks of variable length. The PEO core was swelled with KAuCl4 in N,N-dimethylformamide (DMF), and gold nanoparticles were subsequently obtained by reduction with NaBH4. Since the process was always templated by the same PEO core for all investigated polymers, the average dimension of the formed gold nanoparticles was in the same range for all star-block copolymers. In sharp contrast, the size distribution and long-term stability against aggregation of the gold nanoparticles dispersed in DMF were strongly dependent on the PCL block length, confirming the role of PCL blocks as stabilizing blocks for these nanoparticles.     

Balance of polyacrylate-fluorosilicone block copolymers as icephobic coatings

Polyacrylate-fluorosilicone block copolymers, namely, polyacrylate-b-polydimethylsiloxane and polyacrylate-bpolymethyltrifluoropropylsiloxane were synthesized for fabricating icephobic coatings. The surface morphology and chemical composition of the block copolymers were characterized by atomic force microscopy and X-ray photoelectron spectroscopy, suggesting that the fluorosilicone blocks aggregated on the top of the copolymer surfaces. Results of water contact angles and ice shear strength demonstrated a certain amount adding of methacryloisobutyl polyhedral oligomeric silsesquioxane could lead to the decrease of contact angle hysteresis and increase of surface roughness, consequently resulting in significant reduction of the ice adhesion strength. Therefore, the block copolymers with the combined advantages of silicone and fluoropolymers could be potentially applied as icephobic coatings.