Diffusion of polyphosphates into (poly(allylamine)-montmorillonite) multilayer films: flame retardant-intumescent films with improved oxygen barrier

The present paper relies on the original idea to design multifunctional coatings, and in particular highly efficient intumescent flame retardant coatings, based on the diffusion of polyphosphates (PSPs) in exponentially growing "layer-by-layer" films made from montmorillonite (MMT) and poly(allylamine) (PAH). Here, we used polyphosphates as an acid source, polyallylamine as both a carbon source and a swelling agent, and finally clays to reinforce the intumescent char strength and also for their oxygen barrier property. The coatings made from the alternated deposition of n = 60 layer pairs of PAH and MMT reach a considerable thickness of ～18 μm with well-defined ordering of the MMT in the direction parallel to the substrate. Structural, morphological, mechanical, gas barrier, and fire resistance properties of these films have been studied. Excellent oxygen barrier properties and extraordinary fire resistance properties are demonstrated based on the basis of a strong increase of the time to ignition and on a decrease of the heat release rate of polylactide substrates during mass loss calorimeter tests. This new and innovative intumescent flame retardant system based on (PAH-MMT)(n)-PSP coatings is a promising universal treatment for current polymeric materials.     

Weak Polyelectrolytes as Nanoarchitectonic Design Tools for Functional Materials: A Review of Recent Achievements

The ionization degree, charge density, and conformation of weak polyelectrolytes can be adjusted through adjusting the pH and ionic strength stimuli. Such polymers thus offer a range of reversible interactions, including electrostatic complexation, H-bonding, and hydrophobic interactions, which position weak polyelectrolytes as key nano-units for the design of dynamic systems with precise structures, compositions, and responses to stimuli. The purpose of this review article is to discuss recent examples of nanoarchitectonic systems and applications that use weak polyelectrolytes as smart components. Surface platforms (electrodeposited films, brushes), multilayers (coatings and capsules), processed polyelectrolyte complexes (gels and membranes), and pharmaceutical vectors from both synthetic or natural-type weak polyelectrolytes are discussed. Finally, the increasing significance of block copolymers with weak polyion blocks is discussed with respect to the design of nanovectors by micellization and film/membrane nanopatterning via phase separation.     

Cyborg cells: functionalisation of living cells with polymers and nanomaterials

Living cells interfaced with a range of polyelectrolyte coatings, magnetic and noble metal nanoparticles, hard mineral shells and other complex nanomaterials can perform functions often completely different from their original specialisation. Such "cyborg cells" are already finding a range of novel applications in areas like whole cell biosensors, bioelectronics, toxicity microscreening, tissue engineering, cell implant protection and bioanalytical chemistry. In this tutorial review, we describe the development of novel methods for functionalisation of cells with polymers and nanoparticles and comment on future advances in this technology in the light of other literature approaches. We review recent studies on the cell viability and function upon direct deposition of nanoparticles, coating with polyelectrolytes, polymer assisted assembly of nanomaterials and hard shells on the cell surface. The cell toxicity issues are considered for many practical applications in terms of possible adverse effects of the deposited polymers, polyelectrolytes and nanoparticles on the cell surface.     

Assessment of polyelectrolyte coating stability under dynamic buffer conditions in CE

Dynamic buffer conditions are present in many electrophoretically driven separations. Polyelectrolyte multilayer coatings have been employed in CE because of their chemical and physical stability as well as their ease of application. The goal of this study is to measure the effect of dynamic changes in buffer pH on flow using a real-time method for measuring EOF. Polyelectrolyte multilayers (PEMs) were composed of pairs of strong or completely ionized polyelectrolytes including poly(diallyldimethylammonium) chloride and poly(styrene sulfonate) and weak or ionizable polyelectrolytes including poly(allylamine) and poly(methacrylic acid). Polyelectrolyte multilayers of varying thicknesses (3, 4, 7, 8, 15, or 16 layers) were also studied. While the magnitude of the EOF was monitored every 2 s, the buffer pH was exchanged from a relatively basic pH (7.1) to increasingly acidic pHs (6.6, 6.1, 5.5, and 5.1). Strong polyelectrolytes responded minimally to changes in buffer pH (<1%), whereas substantial (>10%) and sometimes irreversible changes were measured with weak polyelectrolytes. Thicker coatings resulted in a similar magnitude of response but were more likely to degrade in response to buffer pH changes. The most stable coatings were formed from thinner layers of strong polyelectrolytes.     

Functional Poly(ionic liquid) Porous Membranes: From Fabrications to Advanced Applications†

Polyelectrolyte porous membranes (PPMs) belong to the most interesting classes of materials, because the synergy of tunable pore sizes and charge nature of polyelectrolyte endow them with wide-ranging practical applications. However, owing to the water solubility and ionic nature of the polyelectrolytes, traditional polyelectrolytes are difficult to use in scalable preparation of high-quality PPMs through the well-developed industrial methods. Poly(ionic liquid)s (PIL) are a subclass of functional polyelectrolytes bearing ionic liquid groups in their repeating unites, inheriting the advantages of ionic liquids (ILs) and macromolecular architecture features. In recent years, along with rapid development of PIL materials chemistry, considerable and significant developments involving the novel preparation methods, and structure-property-function relationships of PPMs have been made. In this review, we highlight the latest discovery and proceedings of PPMs, particularly the advancements in how to tailor structures and properties of PPMs by rational structure design of PILs. The formation mechanisms of various PPMs were also discussed in detail from the viewpoint of PILs molecular structures. A future perspective of the challenges and promising potential of PPMs is cast on the basis of these achievements. We expect that these analyses and deductions will be useful for the design of useful PPMs and serve as a source of inspiration for the design of future multifunctional PPMs.      

Creation of functional membranes using polyelectrolyte multilayers and polymer brushes

Over the last 15 years, the layer-by-layer deposition of polyelectrolytes and the growth of polymer brushes from surfaces have become established techniques for the formation of a wide range of thin films. This article discusses the use of these techniques in creating the skin layer of nanofiltration or gas-separation membranes and in functionalizing the interior of membranes for protein adsorption or catalysis. In the case of separation membranes for nanofiltration, the minimal thickness of layer-by-layer films allows for high flux, and the wide range of available polyelectrolytes that can form these films permits the tailoring of membranes for separations such as water softening, the reduction of F (-) concentrations, and the removal of dyes from wastewater. For gas separation, polymers grown from surfaces are more attractive than layer-by-layer coatings because most polyelectrolyte films are not highly gas-selective. Cross-linked poly(ethylene glycol dimethacrylate) films grown from porous alumina exhibit CO(2)/CH(4) selectivities of around 20, and the careful selection of monomers should further improve the selectivity of similar membranes. Both layer-by-layer methods and polymer brushes can also be employed to modify the interior of membranes, and we have utilized these techniques to create catalysts, antibody arrays in membranes, and membrane absorbers for protein purification. Polymer brushes are particularly attractive because they allow the absorption of multilayers of protein to yield membranes with binding capacities as high as 150 mg protein/cm(3). Some challenges in the practical implementation of these systems, such as the economical formation of membranes using highly permeable polymeric supports, and future directions in research on membrane modification with multilayer films and polymer brushes are also discussed herein.     

Cationic poly(methacryl oxyethyl trimethylammonium) and its poly(ethylene glycol)‐grafted analogue as capillary coating materials in electrophoresis

Cationic polyelectrolytes were synthesized and used as semipermanent coating materials for capillaries in electrophoresis. The polyelectrolytes used were a homopolymer of poly(methacryl oxyethyl trimethylammonium chloride) (PMOTAC) and its poly(ethylene glycol) (PEG)‐grafted analogue. Two PMOTAC polyelectrolytes, with molar masses of 85,000 and 300,000 g/mol, and PEG‐grafted PMOTAC with a molar mass of 280,000 g/mol were synthesized and then characterized by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. Attachment of the polyelectrolytes to the wall of the fused silica capillary for electrophoresis caused the electroosmotic flow (EOF) to reverse. The polyelectrolyte coatings were tested over the pH range 2–11 at different buffer ionic strengths, and the most stable and strongest anodic EOFs were obtained at acidic pH values with low ionic strength buffers. Between runs the capillary is merely rinsed for 2 or 3 min with the background electrolyte solution. With the PMOTAC coatings at pH values ≤5, the RSDs of the EOFs were less than 2.9% after 60 injections. The effects of the molar mass of the polycation and of PEGylation of PMOTAC on the interactions between the polycations and basic proteins were studied at acidic pH values. The differences in the effective electrophoretic mobilities, resolution values, and plate numbers of the proteins with the different coatings were due to the EOF, as demonstrated through calculations of reduced mobilities, relative resolution values, and relative plate numbers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2655–2663, 2007     

Emerging Methods and Design Principles for Cell‐Penetrant Peptides

Biomolecules such as antibodies, proteins, and peptides are important tools for chemical biology and leads for drug development. They have been used to inhibit a variety of extracellular proteins, but accessing intracellular proteins has been much more challenging. In this review, we discuss diverse chemical approaches that have yielded cell‐penetrant peptides and identify three distinct strategies: masking backbone amides, guanidinium group patterning, and amphipathic patterning. We summarize a growing number of large data sets, which are starting to reveal more specific design guidelines for each strategy. We also discuss advantages and disadvantages of current methods for quantifying cell penetration. Finally, we provide an overview of best‐odds approaches for applying these new methods and design principles to optimize cytosolic penetration for a given bioactive peptide.     

Thickness and morphology of polyelectrolyte coatings on silica surfaces before and after protein exposure studied by atomic force microscopy

Analyte–wall interaction is a significant problem in capillary electrophoresis (CE) as it may compromise separation efficiencies and migration time repeatability. In CE, self-assembled polyelectrolyte multilayer films of Polybrene (PB) and dextran sulfate (DS) or poly(vinylsulfonic acid) (PVS) have been used to coat the capillary inner wall and thereby prevent analyte adsorption. In this study, atomic force microscopy (AFM) was employed to investigate the layer thickness and surface morphology of monolayer (PB), bilayer, (PB-DS and PB-PVS), and trilayer (PB-DS-PB and PB-PVS-PB) coatings on glass surfaces. AFM nanoshaving experiments providing height distributions demonstrated that the coating procedures led to average layer thicknesses between 1 nm (PB) and 5 nm (PB-DS-PB), suggesting the individual polyelectrolytes adhere flat on the silica surface. Investigation of the surface morphology of the different coatings by AFM revealed that the PB coating does not completely cover the silica surface, whereas full coverage was observed for the trilayer coatings. The DS-containing coatings appeared on average 1 nm thicker than the corresponding PVS-containing coatings, which could be attributed to the molecular structure of the anionic polymers applied. Upon exposure to the basic protein cytochrome c, AFM measurements showed an increase of the layer thickness for bare (3.1 nm) and PB-DS-coated (4.6 nm) silica, indicating substantial protein adsorption. In contrast, a very small or no increase of the layer thickness was observed for the PB and PB-DS-PB coatings, demonstrating their effectiveness against protein adsorption. The AFM results are consistent with earlier obtained CE data obtained for proteins using the same polyelectrolyte coatings.     

Multicompartment films made of alternate polyelectrolyte multilayers of exponential and linear growth

The layer by layer deposition process of polyelectrolytes is used to construct films equipped with several compartments containing "free polyelectrolytes". Each compartment corresponds to a stratum of an exponentially growing polyelectrolyte multilayer film, and two consecutive compartments are separated by a stratum composed of a linearly growing multilayer that acts as a barrier preventing polyelectrolyte diffusion from one compartment to another. We use hyaluronic acid/poly(L-lysine) as the system to build the compartments and the poly(styrene sulfonate)/poly(allylamine) system for the barrier. Using confocal microscopy, it is shown that poly(L-lysine) diffuses only within the compartment in which it was initially introduced during the film construction and is thus unable to cross the barriers. Using fluorescein isothiocyanate as a pH indicator, it is also shown that although poly(styrene sulfonate)/poly(allylamine) multilayers act as a barrier for polyelectrolytes, they do not prevent proton diffusion through the film. Such films open the route for multiple functionalization of biomaterial coatings.     

Multisegmented one-dimensional nanorods prepared by hard-template synthetic methods

In the science and engineering communities, the nanoscience revolution is intensifying. As many types of nanomaterials are becoming more reliably synthesized, they are being used for novel applications in all branches of nanoscience and nanotechnology. Since it is sometimes desirable for single nanomaterials to perform multiple functions simultaneously, multicomponent nanomaterials, such as core-shell, alloyed, and striped nanoparticles, are being more extensively researched. Nanoscientists hope to design multicomponent nanostructures and exploit their inherent multiple functionalities for use in many novel applications. This review highlights recent advances in the synthesis of multisegmented one-dimensional nanorods and nanowires with metal, semiconductor, polymer, molecular, and even gapped components. It also discusses the applications of these multicomponent nanomaterials in magnetism, self-assembly, electronics, biology, catalysis, and optics. Particular emphasis is placed on the new materials and devices achievable using these multicomponent, rather than single-component, nanowire structures.     

表面抗菌功能涂层的构建及在生物医用材料中的应用研究

近年来,生物医用材料在使用过程中产生的医源性感染问题层出不穷,对人们健康和生命造成严重威胁.表面抗菌涂层构建是解决该类医源性感染问题最有效的策略之一.目前,按照作用机制和功能不同将表面抗菌涂层分为接触式抗菌涂层、抗黏附抑菌涂层、抗黏附杀菌涂层以及智能抗菌涂层.表面抗菌涂层的构建不仅赋予了生物医用材料抗菌性能,有效解决了...     

Hierarchically structured superhydrophilic coatings fabricated by self-assembling raspberry-like silica nanospheres

Raspberry-like silica nanospheres were prepared by electrostatic self-assembly of polyelectrolytes and monodisperse silica nanoparticles of two different sizes, and their coatings were fabricated via layer-by-layer assembly with polyelectrolytes and following calcination. The morphology of the raspberry-like silica nanospheres and their coatings were observed by scanning and transmission electron microscopies. The surface properties of these coatings were investigated by measuring their water contact angles, and the results showed that such hierarchically structured coatings had unique superhydrophilic and antifogging properties. Finally, the formation mechanism and the property-structure relationship were discussed in details.     

Influence of polyelectrolyte coating conditions on capillary coating stability and separation efficiency in capillary electrophoresis

Polyelectrolytes are widely used in capillary electrophoresis as coating agents of silica capillaries to prevent adsorption phenomena and improve the repeatability of peptide and protein analysis. A systematic study of the coating experimental conditions has been carried out to optimize coating stability and performance. The main experimental parameters studied were the type and concentration of polyelectrolytes used in several monolayer and multilayer coatings, the ionic strength of coating and stabilizing solutions, and the procedures used for coating and capillary storage. Electroosmotic flow magnitude, direction and repeatability were used to monitor coating stability. Coating ability to limit adsorption was investigated by monitoring variations of migration times, time-corrected peak areas and separation efficiency of test peptides. Capillary-to-capillary and batch-to-batch reproducibility was also studied. In addition, the separation performance of polyelectrolyte coatings were compared to those obtained with bare silica capillaries.     

Nanofabrication: conventional and nonconventional methods

Nanofabrication is playing an ever increasing role in science and technology on the nanometer scale and will soon allow us to build systems of the same complexity as found in nature. Conventional methods that emerged from microelectronics are now used for the fabrication of structures for integrated circuits, microelectro-mechanical systems, microoptics and microanalytical devices. Nonconventional or alternative approaches have changed the way we pattern very fine structures and have brought about a new appreciation of simple and low-cost techniques. We present an overview of some of these methods, paying particular attention to those which enable large-scale production of lithographic patterns. We preface the review with a brief primer on lithography and pattern transfer concepts. After reviewing the various patterning techniques, we discuss some recent application issues in the fields of microelectronics, optoelectronics, magnetism as well as in biology and biochemistry.     

Polymer architectures via mass spectrometry and hyphenated techniques: A review

This review covers the application of mass spectrometry (MS) and its hyphenated techniques to synthetic polymers of varying architectural complexities. The synthetic polymers are discussed as according to their architectural complexity from linear homopolymers and copolymers to stars, dendrimers, cyclic copolymers and other polymers. MS and tandem MS (MS/MS) has been extensively used for the analysis of synthetic polymers. However, the increase in structural or architectural complexity can result in analytical challenges that MS or MS/MS cannot overcome alone. Hyphenation to MS with different chromatographic techniques (2D × LC, SEC, HPLC etc.), utilization of other ionization methods (APCI, DESI etc.) and various mass analyzers (FT-ICR, quadrupole, time-of-flight, ion trap etc.) are applied to overcome these challenges and achieve more detailed structural characterizations of complex polymeric systems. In addition, computational methods (software: MassChrom2D, COCONUT, 2D maps etc.) have also reached polymer science to facilitate and accelerate data interpretation. Developments in technology and the comprehension of different polymer classes with diverse architectures have significantly improved, which allow for smart polymer designs to be examined and advanced. We present specific examples covering diverse analytical aspects as well as forthcoming prospects in polymer science.     

Über Polyanion-Polykation-Komplexe mit Polyphosphat

Polyanion-Polycation Complexes with Polyphosphate With two Na polyphosphates of different molar weight and a series of cationic polyelectrolytes (polydimethyldiallylammonium chloride, polyethylenimine, cationically modified polyacryloamides of different charge density) polysalts (symplexes) have been prepared. The precipitates were investigated with regard to stoichiometry of cationic to anionic groups, with regard to swelling in water, and with regard to morphology. Applying special conditions of component concentration, stoichiometric 1:1 symplexes were obtained also with polyphosphate. According to our results, the cohesion in these polyphosphate symplexes is caused mainly by electrostatic forces only, in contrast to symplexes with anionic cellulose derivatives.     

1，4，7，10－四氮杂环十二烷及其衍生物的合成

1，4，7，10－四氮杂环十二烷（cyclen）及其衍生物具有优良的配位性能， 在化学及生物医学等领域有广泛的应用潜力，合成高纯度的cyclen非常困难，制备 符合不同要求的cyclen衍生物也有相当的难度，本文着重介绍cyclen及其N－取代 衍生物的各种合成方法，并对不同方法的优缺点进行比较，以供研究者选择。另外 ，还简要介绍了部分重要的cyclen衍生物在不同领域的应用情况。     

Pillararene-based supramolecular systems for theranostics and bioapplications

As an emerging type of important macrocycles for supramolecular chemistry, pillararenes and their derivatives have been widely studied and applied in numerous fields, which intensively promotes the development of chemistry, materials science and biology.Pillararene-based theranostic systems are of special interest in the biological and medical areas as they have shown very promising results. Owing to easy preparation, reliable guest affinity, good biocompatibility and stability, pillararenes are frequently used to construct functional biomaterials. On one hand, pillararenes can either be used individually or form diversiform self-assemblies such as micelles, nanoparticles and vesicles to increase water solubility and biocompatibility of drugs.On the other hand, it is promising to modify solid materials like framework materials, silica nanoparticles and graphene oxides with pillararene derivatives to enhance their functions and controllability. In this review, we summarize recent endeavors of pillararene-based supramolecular systems with theranostics and other biological applications comprising drug delivery/chemotherapy, photodynamic/photothermal therapy, antimicrobials, bioimaging, etc. By introducing several typical examples, the design principles, preparation strategies, identifications and bio-applications of these pillararene-based supramolecular systems are described. Future challenges and directions of this field are also outlined.     

Direct evidence of layer-by-layer assembly of polyelectrolyte multilayers on soft and porous temperature-sensitive PNiPAM microgel using fluorescence correlation spectroscopy

We describe the layer-by-layer assembly of polyelectrolyte multilayers on soft and porous temperature-sensitive poly(N-isopropylacrylamide) (PNiPAM) microgel. Microgels are not hard and rigid but rather are soft and porous particles, and polyelectrolytes not only interdigitate with each other during multilayer formation but also with the microgel. Because of this difference, there could be concerns about the feasibility of the layer-by-layer technique on these systems. The argument is that the layer being deposited is stripping the underlying layer instead of anchoring to the latter, and common methods of characterizing film growth on particles such as zeta-potentials will still show "successful" charge reversal. To address this issue, we used two differently labeled polyelectrolytes during the deposition. Because of the small size of the microgel (400 nm) studied, we cannot distinguish between polyelectrolytes adsorbed on or in the microgel. However, with fluorescence correlation spectroscopy, we can clearly distinguish between free labeled polyelectrolytes and those that are bound to the microgel. Dual-color correlation confirms the presence of both polyelectrolytes bound to the same particle while fluorescence imaging (on a dry sample) provides the visual proof.