A new electrochemical method based on transfer at a liquid/liquid interface: Determination of barium and strontium

A new kind of polyoxyethylene ionophore is introduced to facilitate metal ion transfer across a liquid/liquid interface. The transfer of Ba(2+) and Sr(2+), facilitated by polyethylene glycol 400 across the interfaces of water/nitrobenzene and water/1,2-dichloroethane, has been studied in detail by cyclic voltammetry, and a new method for the determination of barium and strontium established. Both metals can be determined by cyclic voltammetry with good selectivity and reproducibility.     

Charge transfer across a polymer gel/liquid interface: determination of ionophores

An electrochemical method for the determination of the ionophores monensin and lasalocid was developed, based on the polarization of an agar gel/nitrobenzene electrolyte interface. The measured current corresponding to the facilitated ion transfer across this interface is directly proportional to the concentration of an ionophore dissolved in the organic phase. Using cyclic voltammetry in a three-electrode system the detection limit for both ionophores is about 3 × 10^?5 M.     

Electrochemical heparin sensing at liquid/liquid interfaces and polymeric membranes

The monitoring of heparin and its derivatives in blood samples is important for the safe usage of these anticoagulants and antithrombotics in many medical procedures. Such an analytical task is, however, highly challenging due to their low therapeutic levels in the complex blood matrix, and it still relies on classical, indirect, clot-based assays. Here we review recent progress in the direct electrochemical sensing of heparin and its analogs at liquid/liquid interfaces and polymeric membranes. This progress has been made by utilizing the principle of electrochemical ion transfer at the interface between two immiscible electrolyte solutions (ITIES) to voltammetrically drive the interfacial transfer of polyanionic heparin and monitoring the resulting ionic current as a direct measure of heparin concentration. The sensitivity, selectivity, and reproducibility of the ion-transfer voltammetry of heparin are dramatically enhanced compared to those of traditional potentiometry. This voltammetric principle was successfully applied for the detection of heparin in undiluted blood samples, and was used to develop highly sensitive ion-selective electrodes based on thin polymeric membranes that are intended for analytical applications beyond heparin detection. The mechanism of heparin recognition and transfer at liquid/liquid interfaces was assessed quantitatively via sophisticated micropipet techniques, which aided the development of a powerful ionophore that can extract large heparin molecules into nonpolar organic media. Moreover, the reversible potentiometric detection of a lethal heparin-like contaminant in commercial heparin preparations was achieved through the use of a PVC membrane doped with methyltridodecylammonium chloride, which enables charge density dependent polyanion selectivity.     

Probing non-polarizable liquid/liquid interfaces using scanning ion conductance microscopy

The study of microscopic structure of a liquid/liquid interface is of fundamental importance due to its close relation to the thermodynamics and kinetics of interfacial charge transfer reactions.In this article,the microscopic structure of a non-polarizable water/nitrobenzene(W/NB) interface was evaluated by scanning ion conductance microscope(SICM).Using SICM with a nanometer-sized quartz pipette filled with an electrolyte solution as the probe,the thickness of this type of W/NB interface could be measured at sub-nanometer scale,based on the continuous change of ionic current from one phase to another one.The effects for thicknesses of the non-polarizable W/NB interfaces with different electrolyte concentrations,the Galvani potentials at the interface and the applied potentials on the probe were measured and systematically analyzed.Both experimental setups,that is an organic phase up and an aqueous down,and a reverse version,were employed to acquire the approach curves.These data were compared with those of an ideal polarizable interface under the similar experimental conditions,and several characteristics of non-polarizable interfaces were found.The thickness of a non-polarizable interface increases with the decrease of electrolyte concentration and the increase of applied potential,which is similar to the situation of a polarizable liquid/liquid interface.We also find that the Galvani potential across a non-polarizable interface can also influence the interfacial thickness,this phenomenon is difficult to observe when using polarizable interface.Most importantly,by the comparison of two kinds of liquid/liquid interfaces,we experimentally proved that much more excess ions are gathered in the space charge layer of non-polarizable interfaces than in that of polarizable interfaces.These results are consistent with the predictions of molecular dynamic simulations and X-ray reflectivity measurements.     

Transfer Mechanism of Ionic Drugs: Piroxicam as an agent facilitating proton transfer

Facilitated proton transfer may be of potential significance in pharmacokinetic and pharmacodynamic processes. Here, we show that the NSAID piroxicam and its N-and O-methylated derivatives act as ionophores for proton transfer across the H₂O/1,2-dichloroethane interface. Investigations by cyclic voltammetry showed that the proton transfer occurs by interfacial protonation of the ionophore. The dissociation constants of the three compounds in the organic phase were calculated by Matsuda's theory. With this particular transfer mechanism, the present study exemplifies how electrochemistry at a liquid/liquid interface can be applied to calculate the fundamental thermodynamic parameters related to the pharmacokinetic behavior of ionic drugs.     

中性载体ETH1616推动质子在油／水界面的转移

本文用循环伏安法和循环电流扫描计时电位法研究了中性载体ETH1616(N,N-bjs-heptylethyldiamide)推动质子在油/水界面的转移过程,探讨了有关转移过程的机理,测定了相应的扩散系数和配合物的稳定常数。     

Molecular dynamics simulation of the water|nitrobenzene interface

The structure and dynamics of the neat water|nitrobenzene liquid|liquid interface are studied at 300 K using molecular dynamics computer simulations. The water is modeled using the flexible SPC potential, and the nitrobenzene is modeled using an empirically determined nitrobenzene potential energy function. Although nitrobenzene is a polar liquid with a large dielectric constant, the structure of the interface is similar to other water|non-polar organic liquid interfaces. Among the main structural features we describe are an enhancement of interfacial water hydrogen bonds, the specific orientation of water dipoles and nitrobenzene molecules, and a rough surface that is locally sharp. Surface roughness is also characterized dynamically. The dynamics of molecular reorientation are shown to be only mildly modified at the interface. The effect due to the polarizable many-body potential energy functions of both liquids is investigated and is found to affect only mildly the above results.     

Interfacial tension in polyelectrolyte systems exhibiting associative liquid–liquid phase separation

A continued interest in polyelectrolyte phase diagrams guides the study of interfacial phenomena driven by polyelectrolyte complexation. The liquid–liquid interfaces formed by associative phase separation of oppositely charged synthetic and natural polyelectrolytes provide measurement challenges addressed by force-sensitive methods and deformed droplet retraction. The ultralow interfacial tension, typical of these systems, is sensitive to salt concentration and temperature and displays universal features described by mean-field theory. Several areas of fundamental development and novel applications of charge complexation for interfacial study and examples from membraneless organelles and biomolecular condensates are described.     

Triton X-100推动碱金属离子在液/液界面上转移的机制和伏安行为

本文用四电极循环伏安法研究了非离子型表面活性剂Triton X-100推动碱金属离子K^+, Na^+等在水/硝基苯, 水/1,2-二氯乙烷界面上的转移过程, 根据实验结果提出Triton X-100推动金属离子转移的一种机制, 推导了转移半波电位方程式, 并用实验进行了验证。     

Hydrogen-bond-assisted excited-state deactivation at liquid/water interfaces

The excited-state dynamics of eosin B (EB) at dodecane/water and decanol/water interfaces has been investigated with polarization-dependent and time-resolved surface second harmonic generation. The results of the polarization-dependent measurements vary substantially with (1) the EB concentration, (2) the age of the sample, and (3) the nature of the organic phase. All of these effects are ascribed to the formation of EB aggregates at the interface. Aggregation also manifests itself in the time-resolved measurements as a substantial shortening of the excited-state lifetime of EB. However, independently of the dye concentration used, the excited-state lifetime of EB at both dodecane/water and decanol/water interfaces is much longer than in bulk water, where the excited-state population undergoes hydrogen-bond-assisted non-radiative deactivation in a few picoseconds. These results indicate that hydrogen bonding between EB and water molecules at liquid/water interfaces is either much less efficient than in bulk water or does not enhance non-radiative deactivation. This strong increase of the excited-state lifetime of EB at liquid/water interfaces opens promising avenues of applying this molecule as a fluorescent interfacial probe.     

Dynamic behaviors of molecular assemblies at liquid/liquid interfaces studied by time-resolved quasi-elastic laser scattering spectroscopy.

The dynamic behaviors of molecular assemblies at two immiscible liquid interfaces are intriguing topics in many fields of science and technology. However, it is generally difficult to investigate the dynamic behaviors of such molecular assemblies because of the buried nature of liquid/liquid interfaces. In the present paper, our recent investigations on dynamic behaviors of various molecular self-assemblies at liquid/liquid interfaces are reviewed. We monitored dynamic behaviors of the molecular assemblies by time-resolved quasi-elastic laser scattering (TR-QELS) and fluorescent spectroscopy. The former method allows us to monitor the change in interfacial tension with millisecond time-resolution. As molecular assemblies, bis(2-ethylhexyl)sulfosuccinate (AOT) microemulsion, phospholipid biomembrane models, and liposome-DNA complexes have all been studied, since they are relevant in material sciences and biological technologies. At liquid/liquid interfaces, these molecular assemblies showed characteristic behaviors. We review the finding of rebound response of the interfacial tension at the liquid/liquid interface induced by the adsorption of the AOT microemulsion. We monitored the hydrolysis reaction of phospholipid biomembrane models formed at oil/water interfaces, observing the different types of behavior of liposome-DNA complexes at biomembrane models with different kinds of phospholipids.     

Lactone cleavage reaction kinetics of rhodamine dye at liquid/liquid interfaces studied by micro-two-phase sheath flow/two-photon excitation fluorescence microscopy

Two-photon excitation fluorescence microscopy was combined with the two-phase microflow system in order to measure the fast interfacial reaction rate at liquid/liquid interfaces. The lactone cleavage kinetics of octadecylrhodamine B (C(18)RB) at the toluene/water and heptane/water interfaces was studied by this new method. The organic solution containing the nonfluorescent lactone of C(18)RB was made to flow as an inner flow with an aqueous outer sheath flow. The diameter of the inner flow was <20 microm. A focused fundamental beam of a Ti:sapphire pulse laser of 780 nm was irradiated to the interface, and emitted fluorescence from the fluorescent product was detected by a charge-coupled device (CCD) camera or a streakscope. The increase in the concentration of the fluorescent form of C(18)RB was measured along the interface of the inner flow of the toluene/water and heptane/water systems for 80 micros just after the contact of two phases. The analysis made by the time-dependent Langmuir adsorption model with the aid of the digital simulation method gave the cleavage reaction rate constants of the lactone form of C(18)RB at the liquid/liquid interfaces.     

中性载体ETH129推动金属离子在水/硝基苯界面的转移

本文用循环伏安法发现了中性载体ETH129(N, N, N', N'-四环己基-3-氧杂-戊二酰胺)在水/硝基苯界面推动H^+, Li^+, Na^+, Zn^2^+, Mg^2^+, Cu^2^+的离子转移,对推动离子转移过程的机理进行了探讨, 测定了相应离子的扩散系数和其配合物的稳定常数。     

Liquid–liquid interfaces: studied by X-ray and neutron scattering

Major recent advances include the development of new experimental techniques that enabled the first precise measurements of interfacial widths at water–oil interfaces and of the ordering of surfactants adsorbed to these interfaces, studies of phase transitions and domain formation in surfactant monolayers, and studies of interfacial fluctuations confined by and coupled across thin liquid films.     

Selective transport of zinc and copper ions by synthetic ionophores using liquid membrane technology

This work highlights the role of synthetic carrier (ionophore) in the separation of heavy metal ions. A new series of ionophores; 4,4′-nitrophenyl-azo-O,O′-phenyl-3,6,9-trioxaundecane-1,10-dioate (R₁), bis[4,4′nitro-phenylazo-naphthyl-(2,2-dioxydiethylether)] (R₂) 1,8-bis-(2-naphthyloxy)-3,6-dioxaoctane (R₃), 1,11-bis-(2-naphthyloxy)-3,6,9-trioxaunde-cane (R₄), 1,5-bis-(2-naphthyloxy)-3-oxa-pentane (R₅) have been synthesized and used as extractant as well as carrier for the transport of various metal ions (Na⁺, K⁺, Mg²⁺, Ni²⁺, Cu²⁺ and Zn²⁺) through liquid membranes. Effect of various parameters such as metal ion concentration, ionophore concentration, liquid–liquid extraction, back extraction, comparison of transport efficiency of BLM and SLM and different membrane support (hen’s egg shell and PTFE) have been studied. In BLM ionophores (R₂–R₅) transport Zn⁺ at greater extent and the observed trend for the transport of Zn²⁺ is R₂?>?R₄?>?R₃?>?R₅ respectively. Further transport efficiency is increased in SLM. In egg shell membrane ionophores (R₂–R₅) transport Zn⁺ due to their non-cyclic structure and pseudo cavity formation while ionophore R₁ transports Cu²⁺ ions at greater extent due to its cyclic structure and cavity size. Among the membrane support used egg shell membrane is found best for the transport of zinc ions because of its hydrophobic nature and exhibits electrostatic interactions between positively charged zinc ions and –COOH group of egg shell membrane. Thus structure of ionophores, hydrophobicity and porosity of the membrane support plays important role in separation of metal ions.     

Dynamic adsorption and characterization of phospholipid and mixed phospholipid/protein layers at liquid/liquid interfaces

Drop profile analysis tensiometry is applied to study the adsorption dynamics of phospholipids, proteins and phospholipid/protein mixtures at liquid/liquid interfaces. Measurements of the dynamic interfacial tension of phospholipid layers give information on the adsorption mechanism and the structure of the adsorption layer. The equilibrium and dynamic adsorption of pure protein solutions, i.e. human serum album (HSA), beta-lactoglobulin (beta-LG), beta-casein (beta-CA), can be explained well by the thermodynamic model of Frumkin and the diffusion-controlled adsorption theory. The adsorption behavior from mixed phospholipid/protein solutions was also investigated in terms of dynamic interfacial tensions. Interestingly, a "skin-like" folded film of pure protein or phospholipid/protein complex layers can be observed at curved surfaces at the water/oil interfaces. The addition of phospholipids accelerates the formation of the folded structure at the drop surface through co-adsorption of proteins.     

Study on the Voltammetric Behaviour of Emulsifier OP across the Water-nitrobenzene Interface and its Application

Surfactantsareproducedworldwideinlargeamountsandwidelyusedinhouseholdorindustrialcleaners,cosmetic,researchlaboratories,etc.Manyelectfoanalyticalmethodsdevotedtosurfactantanalysishavebeenproposed',suchaspotentiometry,amperometry,tensammetry,electrocaPillarymeasurements.InthispaPer,emulsifierOP,asanewionophore,hasbeenintroducedtofacilitatemetaliontransferacrossaliquid/liquidinterface.ThevoltammetricbehaviourofemulsifierOP(EOP)whichfacilitatesthetransferofNa acrossthewater/nitrobebzene(w/nb)…     

Electron transfer kinetics at polarized nanoscopic liquid/liquid interfaces

Rapid kinetics of electron transfer (ET) reactions across the interface between water and 1,2-dichloroethane were measured by steady-state voltammetry at nanopipet electrodes (50- to 400-nm orifice radius). The origins of previously reported imperfect voltammetric responses of ET reactions at micropipets were investigated. Several new experimental systems were explored, and two of them yielded high-quality voltammograms suitable for kinetic experiments. The determined standard rate constants were compared to those measured previously at polarized and nonpolarized liquid/liquid interfaces. The effect of the interfacial dimensions on the magnitude of the apparent ET rate constant is discussed. A new approach to ET kinetic measurements based on the use of the scanning electrochemical microscope with a nanopipet tip and a metallic substrate has been developed and employed to check the validity of determined kinetic parameters.     

Cyclic voltammetry of biopolymer heparin at PVC plasticized liquid membrane

Cyclic voltammetry is used to study the charge transfer reaction of the biopolymer heparin at the PVC plasticized 1,6-dichlorohexane membrane–solution interface. Several unique feature of the reaction are demonstrated including the apparent diffusion control and the specific interaction of heparin with the cation of the membrane phase, which probably acts as the heparin carrier (ionophore). Voltammetric behaviour corresponds to the interfacial transfer of a mixture of polyanions with a relatively high content of polyanions carrying a low charge. Amperometry appears to be a suitable method for the quantification of heparin in various preparations with the sensitivity of ca. 1 U mL⁻¹ (S/N=3).