Hydroalumination of alkenes by the LiAlH4 · 3AlBr3 system

The hydroalumination of a series of alkenes and some fused aromatic hydrocarbons by the LiAlH₄ · 3AlBr₃ system in low-polar solvents was studied. Alkenes with mono-, di-, tri-, and tetraalkyl substituted, mono- and diaryl substituted double bonds and anthracene react at room temperature to give the corresponding dibromoaluminoalkanes in high yields. Benzylidenefluorene, tetraphenylethylene, naphthalene, and phenanthrene do not undergo hydroalumination under these conditions. Camphene, bicyclo[3.2.1]oct-2-ene, and norbornene afford the corresponding organoaluminum compounds with high stereoselectivity. Oxidation and halo- and acyldemetallation of the resulting alkyl- and arylalanes were carried out.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1637–1642, September, 1993.     

A general and stereoselective method for synthesis of tri- and tetrasubstituted alkenes

A convenient, general and stereoselective synthesis of trisubstituted alkenes and tetrasubstituted alkenes containing a cyanide function as well as trisubstituted episulphides have been elaborated. Methodology described for the preparation of these compounds is based on the corresponding readily available selenophosphates 1 and thiophosphates 2.     

Design and Scalable Synthesis of N-Alkylhydroxylamine Reagents for the Direct Iron-Catalyzed Installation of Medicinally Relevant Amines**

Secondary and tertiary alkylamines are privileged substance classes that are often found in pharmaceuticals and other biologically active small molecules. Herein, we report their direct synthesis from alkenes through an aminative difunctionalization reaction enabled by iron catalysis. A family of ten novel hydroxylamine-derived aminating reagents were designed for the installation of several medicinally relevant amine groups, such as methylamine, morpholine and piperazine, through the aminochlorination of alkenes. The method has excellent functional group tolerance and a broad scope of alkenes was converted to the corresponding products, including several drug-like molecules. Besides aminochlorination, the installation of other functionalities through aminoazidation, aminohydroxylation and even intramolecular carboamination reactions, was demonstrated, further highlighting the broad potential of these new reagents for the discovery of novel amination reactions.     

Acid/Vanadium‐Containing Saponite for the Conversion of Propene into Coke: Potential Flame‐Retardant Filler for Nanocomposite Materials

Vanadium‐containing saponite samples were synthesized in a one‐pot synthetic procedure with the aim of preparing samples for potential application as fillers for polymeric composites. These vanadium‐modified materials were prepared from an acid support by adopting a synthetic strategy that allowed us to introduce isolated structural V species (H/V‐SAP). The physicochemical properties of these materials were investigated by XRD analysis and by DR‐UV/Vis and FTIR spectroscopy of CO that was adsorbed at 100 K; these data were compared to those of a V‐modified saponite material that did not contain any Brønsted acid sites (Na/V‐SAP). The surface‐acid properties of both samples (together with the fully acidic H‐SAP material and the Na‐SAP solid) were studied in the catalytic isomerization of α‐pinene oxide. The V‐containing solids were tested in the oxidative dehydrogenation reaction of propene to evaluate their potential use as flame‐retardant fillers for polymer composites. The effect of tuning the presence of Lewis/Brønsted acid sites was carefully studied. The V‐containing saponite sample that contained a marked presence of Brønsted acid sites showed the most interesting performance in the oxidative dehydrogenation (ODH) reactions because they produced coke, even at 773 K. The catalytic data presented herein indicate that the H/V‐SAP material is potentially active as a flame‐retardant filler.     

The syn/anti‐Dichotomy in the Palladium‐Catalyzed Addition of Nucleophiles to Alkenes

In this review the stereochemistry of palladium‐catalyzed addition of nucleophiles to alkenes is discussed, and examples of these reactions in organic synthesis are given. Most of the reactions discussed involve oxygen and nitrogen nucleophiles; the Wacker oxidation of ethylene has been reviewed in detail. An anti‐hydroxypalladation in the Wacker oxidation has strong support from both experimental and computational studies. From the reviewed material it is clear that anti‐addition of oxygen and nitrogen nucleophiles is strongly favored in intermolecular addition to olefin–palladium complexes even if the nucleophile is coordinated to the metal. On the other hand, syn‐addition is common in the case of intramolecular oxy‐ and amidopalladation as a result of the initial coordination of the internal nucleophile to the metal.     

Sulfenyl Halides in the Synthesis of Heterocycles. 2. Cyclization in Reactions of Hetarenesulfenyl Chlorides with 3,3-Dimethyl-1-butene

Products of additive cyclization with ring closure at the nitrogen atom of the thiohetaryl unit were synthesized by the interaction of 4,6-dimethylpyrimidine-2-, 3-cyano-4,6-dimethylpyridine-2-, quinoline-8-, and 1,3-benzothiazole-2-sulfenyl chlorides with 3,3-dimethyl-1-butene. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, 893–900, June, 2005.     

Sulfenyl halides in the synthesis of heterocycles. 3. Interaction of perfluoro-1-ethyl-2-methyl-1-propenyl-iminochloromethanesulfenyl chloride with 1-allyl-2-methoxybenzene

Reaction of perfluoro-1-ethyl-2-methyl-1-propenyliminochloromethanesulfenyl chloride with 1-allyl-2-methoxybenzene in methylene chloride and nitromethane gives as the main products β-and β-chloro sulfides plus derivative of 2,3-dihydrobenzofuran. The reaction in nitromethane in the presence of lithium perchlorate gave a product of addition of sulfur-containing electrophiles to the double bond-a derivative of 1,3-thiazolidin-2-one-in preference to the cycloaddition product. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, 1558–1564, October, 2006.     

Functional models for rhodium-mediated olefin-oxygenation catalysis

Oxygenation of C-H and C=C bonds of hydrocarbons with H2O2 and O2 is an important industrial method to convert mineral oil into useful chemicals. Despite their enormous economic impact, these reactions are still not fully understood. In the early 1970s, the potential of Rh and Ir complexes for olefin oxygenation was investigated intensively. Simple inorganic salts of these metals proved to be rather useless for industrial application when compared with the traditional Wacker system. However, the appropriate choice of ligands allows the stepwise oxidation of olefins at Rh and Ir. These systems are therefore useful to study mechanistic details of substrate binding and C-O bond formation at the catalytic metal center. Insight from these model studies helps in understanding the catalytic reactions at these (and possibly other) metal centers. Further insight into the differences between the Rh system and traditional Wacker-type oxidation at Pd may lead to useful applications.     

Sesterterpenes and phenolic alkenes from the Thai sponge Hyrtios erectus

Sesterterpene, erectusolide A (1), six phenolic alkenes, erectuseneols A?F (2–7) and nine known compounds, luffalactone (8), luffariolide E (9), (6E)- and (6Z)-neomanoalide 24,25-diacetates (10 and 11), 6,6-dimethylundecane-2,5,10-trione (12), threo- and erythro-cavernosines (13 and 14), (4E,6E)-dehydromanoalide (15), echinoclerodane A (16), were isolated from the marine sponge Hyrtios erectus. Compound 13 was isolated for the first time from a natural source. The structures of these compounds were elucidated on the basis of spectroscopic analysis. The phenolic alkenes 3 and 7, the sesterterpenes 8–11 and 15, and compounds 12–14 were evaluated for cytotoxic activities against six cancer cell lines, MOLT-3, HepG2, HeLa, HuCCA-1, A549, and MDA-MB-231.     

Fluorohalogenation of gem-Difluoroalkenes: Synthesis and Applications of α-Trifluoromethyl Halides

A novel strategy for 1,2-dihalogenation of alkenes is reported that occurs through a sequential nucleophilic halide addition and electrophilic halogenation. By trapping the in situ generated unstable α-trifluoromethyl carbanion intermediates derived from the nucleophilic fluoride addition to electron-poor gem-difluoroalkenes, this fluorohalogenation of gem-difluoroalkenes with electrophilic haloalkynes affords various useful α-trifluoromethyl halides in high yields. A pesticidal active compound and various attractive trifluromethylated molecules could be smoothly synthesized from these obtained α-trifluoromethyl halides.     

Bredt Compounds and the Bredt Rule

The Bredt rule, which proved useful in earlier decades mainly as an exclusion criterion in the assignment of structures, has in recent years become the stimulus for efforts to synthesize strained bicyclic systems with a bridgehead double bond. On the basis of the ring-strain forces operating in such systems, an extended Bredt rule is discussed. The “Bredt comgounds” to which this rule applies, which include bicyclic systems not prevoously consodered from this point of view (e.g. bridged methylenecyclopropanes), form a clearly circumscribed, interesting field within the chemistry of highly-strained hydrocarbons with ring unsaturation.     

Indium Tribromide-Catalysed Transfer-Hydrogenation: Expanding the Scope of the Hydrogenation and of the Regiodivergent DH or HD Addition to Alkenes

The transfer-hydrogenation as well as the regioselective and regiodivergent addition of H−D from regiospecific deuterated dihydroaromatic compounds to a variety of 1,1-di- and trisubstituted alkenes was realised with InBr₃ in dichloro(m)ethane. In comparison with the previously reported BF₃⋅Et₂O-catalysed process, electron-deficient aryl-substituents can be applied reliably and thereby several restrictions could be lifted, and new types of substrates could be transformed successfully in hydrodeuterogenation as well as deuterohydrogenation transfer-hydrogenation reactions.     

Hydrogenation of non-activated alkenes catalysed by water-soluble ruthenium carbonyl clusters using a biphasic protocol

The use of the water soluble ruthenium clusters Ru₃(CO)_12−x(TPPTN)_x (x=1 1, 2 2 or 3 3) and H₄Ru₄(CO)₁₁(TPPTN) 4 (TPPTN=P{m-C₆H₄SO₃Na)₃) as catalyst precursors in the hydrogenation of non-activated alkenes under biphasic conditions is described. Each cluster displays activity under moderate conditions, ca. 60 atm. H₂ at 60°C, with catalytic turnovers up to ca. 500. The trinuclear clusters undergo transformation during reaction but can be reused repeatedly without loss of activity. Other methodologies such as ionic liquid–organic and the use of silica supports have been attempted with these clusters but they are less effective than the aqueous–organic regime.     

生物催化烯烃不对称环氧化反应

手性环氧化物在合成上具有重要的应用价值。近年来,制取这些手性合成物的合成方法取得了很大的发展。文章重点讨论了生物催化手性前体烯烃不对称合成光学活性环氧化合物的发展状况。     

Endocyclic extension of porphyrin pi-system by interior functionalization of N-confused porphyrins

Internally alkynylated or cyanated N-confused porphyrins have been prepared, and these have been characterized by NMR, UV/Vis/NIR absorption, and X-ray analysis. The desired porphyrins have been synthesized by interconversion between an N-confused porphyrin and an N-fused porphyrin. In the case of terminal alkyne derivatives, intramolecular addition of a pyrrolic NH moiety to the triple bond occurred at ambient temperature to give etheno-bridged N-confused porphyrins. Significant bathochromic shifts in the absorbances of these compounds may be reasonably explained in terms of an increase in their HOMO energy levels due to effective overlap of the porphyrin pi-orbital and the bridged alkene pi-orbital. The corresponding rhodium(I) complexes have also been prepared, and these have been characterized by NMR and X-ray analysis.     

Lanosterol Biosynthesis: The Critical Role of the Methyl‐29 Group of 2,3‐Oxidosqualene for the Correct Folding of this Substrate and for the Construction of the Five‐Membered D Ring

Lanosterol synthase catalyzes the polycyclization reaction of (3S)‐2,3‐oxidosqualene ( 1 ) into tetracyclic lanosterol 2 by folding 1 in a chair‐boat‐chair‐chair conformation. 27‐Nor‐ and 29‐noroxidosqaulenes ( 7 and 8 , respectively) were incubated with this enzyme to investigate the role of the methyl groups on 1 for the polycyclization cascade. Compound 7 afforded two enzymatic products, namely, 30‐norlanosterol ( 12 ) and 26‐normalabaricatriene ( 13 ; 12 / 13 9:1), which were produced through the normal chair‐boat‐chair‐chair conformation and an atypical chair‐chair‐boat conformation, respectively. Compound 8 gave two products 14 and 15 ( 14 / 15 4:5), which were generated by the normal and the unusual polycyclization pathways through a chair‐chair‐boat‐chair conformation, respectively. It is remarkable that the twist‐boat structure for the B‐ring formation was changed to an energetically favored chair structure for the generation of 15 . Surprisingly, 14 and 15 consisted of a novel 6,6,6,6‐fused tetracyclic ring system, thus differing from the 6,6,6,5‐fused lanosterol skeleton. Together with previous results, we conclude that the methyl‐29 group is critical to the correct folding of 1 , with lesser contributions from the other branched methyl groups, such as methyl‐26, ‐27, and ‐28. Furthermore, we demonstrate that the methyl‐29 group has a crucial role in the formation of the five‐membered D ring of the lanosterol scaffold.     

Lewis Acid‐Assisted Ene Cyclization of 2‐Azetidinone‐Tethered Enals: Synthesis of Enantiopure Carbacepham Derivatives

Diastereocontrolled Lewis acid‐catalyzed preparation of enantiopure carbacepham derivatives have been developed starting from 2‐azetidinone‐tethered enals. The BF₃?Et₂O‐promoted reaction of alkenylaldehydes 1 and 16 is effective as carbocyclization protocol to afford 4‐substituted 5‐hydroxycarbacephams or 3‐substituted 4,5‐dihydroxycarbacephams, respectively, by a type I carbonyl‐ene reaction, while the BF₃?Et₂O or SnCl₄‐mediated type II carbonyl‐ene cyclization of alkenylaldehydes 2 furnishes 3‐methylene 5‐hydroxycarbacephams along with the corresponding 3‐halo 5‐hydroxycarbacepham. The stereochemical outcome of these carbonyl‐ene cyclizations leading to carbacepham derivatives can be explained in terms of six‐membered, cyclic chair‐like transition‐state models. The formation of halocarbacepham derivatives is proposed to proceed by a stepwise mechanism.     

Reaction of alkenes with hydrogen peroxide and sodium iodide: a nonenzymatic biogenic-like approach to iodohydrins

An efficient protocol to synthesize iodohydrins from alkenes is presented. Reactions were conducted in aqueous media using safe and readily available sodium iodide (the most abundant form of the element), and a highly convenient oxidant such as hydrogen peroxide. Addition of a protic acid triggers a faster and efficient process, a role formally related to that played by haloperoxidase enzymes in naturally occurring transformations. The successful application of these conditions to multigram scale preparations and over natural products derivatives is also discussed.     

Mechanism of the rhodium-catalyzed asymmetric isomerization of allylamines to enamines

A theoretical study of the mechanism of the rhodium-catalyzed asymmetric isomerization of allylamines to enamines by using density functional theory with the B3LYP functional leads us to discard the so far accepted nitrogen-triggered mechanism, in which the isomerization occurs on N-bonded intermediates and transition states, in favor of a variation of the classical allylic mechanism for olefin isomerization. The modified allylic mechanism consists of four main steps: 1) N-coordination of the allylamine to Rh(I); 2) intramolecular isomerization from kappa(1)-(N)-coordination to eta(2)-(C,C)-coordination of the allylamine; 3) oxidative addition of C(1)--H to form a distorted octahedral eta(3)-allyl complex of Rh(III); and 4) hydrogen transfer to C(3) (reductive C(3)--H elimination). The two hydrogen transfer steps (oxidative addition and reductive elimination) have the highest barriers of the overall process. The oxidative addition barrier, which includes solvent effects, is 28.4 kcal mol(-1). For the reductive elimination, the value in solvent is 28.6 kcal mol(-1), very similar to the oxidative addition barrier.     

Enhanced Catalytic Activity and Unexpected Products from the Oxidation of Cyclohexene by Organic Nanoparticles of 5,10,15,20‐Tetrakis‐(2,3,4,5,6‐pentafluorophenyl)porphyrinatoiron(III) in Water by Using O2

The catalytic oxidation of alkenes by most iron porphyrins using a variety of oxygen sources, but generally not dioxygen, yields the epoxide with minor quantities of other products. The turnover numbers for these catalysts are modest, ranging from a few hundred to a few thousand depending on the porphyrin structure, axial ligands, and other reaction conditions. Halogenation of substituents increases the activity of the metalloporphyrin catalyst and/or makes it more robust to oxidative degradation. Oxidation of cyclohexene by 5,10,15,20‐tetrakis‐(2,3,4,5,6‐pentafluorophenyl)porphyrinato iron(III), ([Fe^III(tppf₂₀)]) and H₂O₂ is typical of the latter: the epoxide is 99 % of the product and turnover numbers are about 350. 1 – 4 Herein, we report that dynamic organic nanoparticles (ONPs) of [Fe^III(tppf₂₀)] with a diameter of 10 nm, formed by host–guest solvent methods, catalytically oxidize cyclohexene with O₂ to yield only 2‐cyclohexene‐1‐one and 2‐cyclohexene‐1‐ol with approximately 10‐fold greater turnover numbers compared to the non‐aggregated metalloporphyrin in acetonitrile/methanol. These ONPs facilitate a greener reaction because the reaction solvent is 89 % water and O₂ is the oxidant in place of synthetic oxygen sources. This reactivity is unexpected because the metalloporphyrins are in close proximity and oxidative degradation of the catalyst should be enhanced, thus causing a significant decrease in catalytic turnovers. The allylic products suggest a different oxidative mechanism compared to that of the solvated metalloporphyrins. These results illustrate the unique properties of some ONPs relative to the component molecules or those attached to supports.