An iodine-free electrolyte based on ionic liquid polymers for all-solid-state dye-sensitized solar cells

An ionic liquid polymer, poly (1-alkyl-3-(acryloyloxy)hexylimidazolium iodide), was employed as an iodine-free electrolyte in all-solid-state dye-sensitized solar cells with an overall conversion efficiency of 5.29% under AM 1.5 simulated solar light (100 mW cm(-2)) illumination.     

Efficient co-sensitization of nanocrystalline TiO(2) films by organic sensitizers

Dye-sensitized solar cells based on co-sensitization of organic dyes having complementary spectral absorption in the visible region resulted in a panchromatic response, which exhibited 86% incident monochromatic photon-to-current conversion efficiency in the visible region; the optimized cell gave a short circuit current density of 15.5 mA cm(-2), an open circuit voltage of 685 mV and a fill factor of 0.70 corresponding to an overall conversion efficiency of 7.43% under solar simulated light irradiation of 100 mW cm(-2).     

A novel blue dye for near-IR 'dye-sensitised' solar cell applications

A squaraine dye incorporating two carboxylic acid attaching groups has been synthesised and used successfully in both liquid and solid-state solar cells, with solar energy to electricity conversion efficiencies (eta) under AM 1.5 G irradiation (100 mW cm(-2)) of 3.7 and 1.5% and short-circuit current densities (J(sc)s) of 8.6 and 4.2 mA cm(-2), with open-circuit voltages (V(oc)) of 591 and 681 mV and fill factors (FF) of 73 and 53%, respectively.     

Platinum-free tungsten carbides as an efficient counter electrode for dye sensitized solar cells

Mesoporous tungsten carbides displayed an excellent solar conversion efficiency (7.01%) as a counter electrode for dye sensitized solar cells under 100 mW cm(-2), AM 1.5G illumination, which corresponded to ca. 85% of the efficiency of the conventional platinum electrode.     

A highly efficient organic sensitizer for dye-sensitized solar cells

We have synthesized a highly efficient organic dye for a dye-sensitized solar cell; the overall solar-to-energy conversion efficiency was 9.1% at AM 1.5 illumination (100 mW cm(-2)): short-circuit current density (J(sc)) = 18.1 mA cm(-2), open circuit photovoltage (V(oc)) = 743 mV and fill factor (ff) = 0.675.     

A novel D-A-π-A organic sensitizer containing a diketopyrrolopyrrole unit with a branched alkyl chain for highly efficient and stable dye-sensitized solar cells

A novel D-A-π-A type organic dye (YCD01) incorporating a diketopyrrolopyrrole unit with a branched alkyl chain was synthesized for dye-sensitized solar cells. YCD01 showed a high conversion efficiency of 7.43% (AM 1.5, 100 mW cm(-2)) with a J(sc) of 13.40 mA cm(-2), a V(oc) of 0.76 V, a FF of 0.73 and an excellent stability.     

Low-bandgap poly(thiophene-phenylene-thiophene) derivatives with broaden absorption spectra for use in high-performance bulk-heterojunction polymer solar cells

Two low-bandgap (LGB) conjugated polymers ( P1 and P2) based on thiophene-phenylene-thiophene (TPT) with adequate energy levels have been designed and synthesized for application in bulk-heterojunction polymer solar cells (PSCs). The absorption spectral, electrochemical, field effect hole mobility and photovoltaic properties of LGB TPT derivatives are investigated and compared with poly(3-hexylthiophene) (P3HT). Photophysical studies reveal bandgaps of 1.76 eV for P1 and 1.70 eV for P2, which could effectively harvest broader solar spectrum. In addition, the thin film absorption coefficients of P1 and P2 are 1.6 x 10 (5) cm (-1) (lambda approximately 520 nm) and 1.4 x 10 (5) cm (-1) (lambda approximately 590 nm), respectively. Electrochemical studies indicate desirable HOMO/LUMO levels that enable a high open circuit voltage while blending them with fullerene derivatives as electron acceptors. Furthermore, both materials show sufficient hole mobility (3.4 x 10 (-3) cm (2)/Vs for P2) allowing efficient charge extraction and a good fill-factor for PSC application. High-performance power conversion efficiency (PCE) of 4.4% is obtained under simulated solar light AM 1.5 G (100 mW/cm (2)) from PSC device with an active layer containing 25 wt% P2 and 75 wt% [6,6]-phenyl-C71-butyric acid methyl ester (PC 71BM), which is superior to that of the analogous P3HT cell (3.9%) under the same experimental condition.     

Synthesis of an all-in-one molecule (for organic solar cells)

A multidomain compound with applications in the area of organic solar cells has been prepared. This all-in-one molecule compound integrates all the functionalities needed for solar cell action from light harvesting, carrier generation, and separation, to transport and contact to external electrodes. A convergent synthetic strategy with some 60 steps involving preparation of regioregular oligothiophenes, a zinc porphyrin, a bisterpyridine ruthenium(II) complex, a hetero oligo phenylenevinylene and functional end groups is described. Preliminary investigations of photovoltaic devices based on the target molecule gave values of 0.18 V, 0.0044 mA cm(-2), 29% and 0.000081% for the open circuit voltage (Voc), short circuit current (Isc), fill factor (FF), and efficiency (eta). These poor values are compared to those obtained with an oligo-3-hexylthiophene which gave values of 0.7 V, 0.046 mA cm(-2), 24.6%, and 0.0081% for the open circuit voltage (Voc), short circuit current (Isc), fill factor (FF) and efficiency (eta). This latter compound was also studied in a bulk heterojunction device with PCBM (1:1 blend) which gave values of 0.43 V, 0.45 mA cm(-2), 33.5%, and 0.063%.     

Multichromophore light harvesting in hybrid solar cells

A new technologically relevant method for multichromophore sensitizing of hybrid blend solar cells is presented. Two dyes having complementary absorption in the UV-visible regions are individually adsorbed on nanocrystalline TiO(2) powder. These dyed TiO(2) nanoparticles are blended with an organic hole-conductor (HC) Spiro-OMeTAD in desired compositions and applied on a conducting substrate by doctor-blading at room temperature to fabricate multichromophore-sensitized hybrid blend solar cells. The external quantum efficiency (EQE) of the single hybrid layer system fabricated with two dyes, that absorb mainly UV (TPD dye) and visible regions (Ru-TPA-NCS dye), exhibited a clear panchromatic response with the sum of the EQE characteristics of each single dye cell. The first results of a multichromophore-sensitized solid-state solar cell showed J(sc) of 2.1 mA cm(-2), V(oc) of 645 mV, FF of 47% and efficiency of 0.65% at AM 1.5 G, 100 mW cm(-2) illumination intensity. The J(sc) of the multichromophore cell is the sum of the individually dyed solar cells. The process described here is technically very innovative and very simple in procedure. It has potentials to be adopted for panchromatic sensitization using more than two dyes in a single hybrid layer or layer-wise fabrication of a tandem structure at room temperature.     

Oligothiophene-containing coumarin dyes for efficient dye-sensitized solar cells

We have developed oligothiophene-containing coumarin dyes fully functionalized for dye-sensitized nanocrystalline TiO(2) solar cells (DSSCs). DSSCs based on the dyes gave good performance in terms of incident photon-to-current conversion efficiency (IPCE) in the range of 400-800 nm. A solar energy-to-electricity conversion efficiency (eta) of 7.4% was obtained with a DSSC based on 2-cyano-3-[5'-(1,1,6,6-tetramethyl-10-oxo-2,3,5,6-tetrahydro-1H,4H,10H-11-oxa-3a-aza-benzo[de]anthracen-9-yl)-[2,2']bithiophenyl-5-yl]acrylic acid (NKX-2677) under simulated AM 1.5G irradiation (100 mW cm(-2)) with a mask: short-circuit current density (J(sc)) = 13.5 mA cm(-2); open-circuit voltage (V(oc)) = 0.71 V; fill factor (FF) = 0.77. Transient absorption spectroscopy measurements indicated that electron injection from NKX-2677 to the conduction band of TiO(2) is very rapid (<100 fs), which is much faster than the emission lifetime of the dye (1.0 ns), giving a highly efficient electron injection yield of near unity.     

Efficient eosin y dye-sensitized solar cell containing Br-/Br3- electrolyte

We found that Br-/Br3- is more suitable than an I-/I3- couple in dye-sensitized solar cells in terms of higher open-circuit photovoltage (Voc) production and higher overall energy conversion efficiency (eta) if the dye sensitizer has a more positive potential than that of Br-/Br3-. Under simulated AM1.5 one sun, an eosin Y dye-sensitized solar cell containing 0.4 M LiBr + 0.04 M Br2 electrolyte in acetonitrile yielded a short-circuit photocurrent (Jsc) of 4.63 mA cm(-2), Voc of 0.813 V, and fill factor (FF) of 0.693, corresponding to 2.61% of eta. Under the same conditions except for the electrolyte 0.4 M LiI + 0.04 M I2 in acetonitrile instead, the device produced 1.67% of eta (Jsc = 5.15 mA cm(-2), Voc = 0.451 V, FF = 0.721). Replacement of I-/I3- with Br-/Br3- in eosin Y dye-sensitized solar cells yielded a significant increase in Voc offset by slight decreases in Jsc and FF, leading to an increase in eta by 56%. The significant gain in Voc was attributed to the enlarged energy level difference between the redox potential of the electrolyte and the Fermi level of TiO2 and the suppressed charge recombination as well. The rate for charge recombination between bromine and the injected electrons was determined to be first order in bromine.     

Molecular engineering of organic sensitizers for dye-sensitized solar cell applications

Novel unsymmetrical organic sensitizers comprising donor, electron-conducting, and anchoring groups were engineered at a molecular level and synthesized for sensitization of mesoscopic titanium dioxide injection solar cells. The unsymmetrical organic sensitizers 3-(5-(4-(diphenylamino)styryl)thiophen-2-yl)-2-cyanoacrylic acid (D5), 3-(5-bis(4-(diphenylamino)styryl)thiophen-2-yl)-2-cyanoacrylic acid (D7), 5-(4-(bis(4-methoxyphenylamino)styryl)thiophen-2-yl)-2-cyanoacrylic acid (D9), and 3-(5-bis(4,4'-dimethoxydiphenylamino)styryl)thiophen-2-yl)-2-cyanoacrylic acid (D11) anchored onto TiO2 and were tested in dye-sensitized solar cell with a volatile electrolyte. The monochromatic incident photon-to-current conversion efficiency of these sensitizers is above 80%, and D11-sensitized solar cells yield a short-circuit photocurrent density of 13.90 +/- 0.2 mA/cm(2), an open-circuit voltage of 740 +/- 10 mV, and a fill factor of 0.70 +/- 0.02, corresponding to an overall conversion efficiency of 7.20% under standard AM 1.5 sun light. Detailed investigations of these sensitizers reveal that the long electron lifetime is responsible for differences in observed open-circuit potential of the cell. As an alternative to liquid electrolyte cells, a solid-state organic hole transporter is used in combination with the D9 sensitizer, which exhibited an efficiency of 3.25%. Density functional theory/time-dependent density functional theory calculations have been employed to gain insight into the electronic structure and excited states of the investigated species.     

Co-sensitization of organic dyes for efficient ionic liquid electrolyte-based dye-sensitized solar cells

The co-sensitization of two organic dyes (SQ1 and JK2), which are complementary in their spectral responses, shows enhanced photovoltaic performance compared with that of an individual organic dye-sensitized solar cell. The power conversion efficiency of the co-sensitized organic dye solar cell based on the newly developed binary ionic liquid (solvent-free) electrolyte gives 6.4% under AM 1.5 sunlight at 100 mW/cm2 irradiation, which is higher than that of individual dye-sensitized solar cells. The incident monochromatic photon-to-current conversion efficiency (IPCE) of the co-sensitized solar cell shows typical absorption peaks at 530 and 650 nm corresponding to the two dyes and displays a broad spectral response over the entire visible spectrum with IPCE of >40% in the 400-700 nm wavelength domain.     

Influence of doped anions on poly(3,4-ethylenedioxythiophene) as hole conductors for iodine-free solid-state dye-sensitized solar cells

Poly(3,4-ethylenedioxythiophene) (PEDOT) is an excellent hole-conducting polymer able to replace the liquid I(-)/I3(-) redox electrolyte in dye-sensitized solar cells (DSCs). In this work we applied the in situ photoelectropolymerization technique to synthesize PEDOT and carried out a careful analysis of the effect of different doping anions on overall solar cell performance. The anions analyzed in this work are ClO4(-), CF3SO3(-), BF4(-), and TFSI(-). The best solar cell performance was observed when the TFSI(-) anion was used. Photoelectrochemical and impedance studies reveal that the doped anions in the PEDOT hole conductor system have great influences on I-V curves, conductivity, and impedance. The optimization of these parameters allowed us to obtain an iodine-free solid-state DSC with a maximum J(sc) of 5.3 mA/cm2, V(oc) of 750 mV, and a conversion efficiency of 2.85% which is the highest efficiency obtained so far for an iodine-free solid-state DSC using PEDOT as hole-transport material.     

Efficient "green" quantum dot-sensitized solar cells based on Cu2S-CuInS2-ZnSe architecture

A Cu(2)S-CuInS(2)-ZnSe quantum dot (QD)-sensitized solar cell with cascaded energy gap structures has been fabricated. Under simulated illumination (AM 1.5, 100 mW cm(-2)), the best device is obtained with a Cu(2)S-CuInS(2)-ZnSe QD-sensitized solar cell, yielding a power conversion efficiency of 2.52%.     

Conductive polymer-carbon-imidazolium composite: a simple means for constructing solid-state dye-sensitized solar cells

A clay-like conductive material comprising polyaniline-loaded carbon black particles and an ethyleneoxide-substituted imidazolium iodide was prepared. The material was sandwiched between dye-coated porous TiO2 and counter-electrode to form a solid-state dye-sensitized solar cell, which works with overall conversion efficiencies of 3.48% and 4.07% for AM 1.5, 100 mW cm(-2) and 23 mW cm(-2) irradiation, respectively.     

Thieno[3,2-b]thiophene-diketopyrrolopyrrole-containing polymers for high-performance organic field-effect transistors and organic photovoltaic devices

We report the synthesis and polymerization of a novel thieno[3,2-b]thiophene-diketopyrrolopyrrole-based monomer. Copolymerization with thiophene afforded a polymer with a maximum hole mobility of 1.95 cm(2) V(-1) s(-1), which is the highest mobility from a polymer-based OFET reported to date. Bulk-heterojunction solar cells comprising this polymer and PC(71)BM gave a power conversion efficiency of 5.4%.     

Synthesis and characterization of a thiazolo[5,4-d]thiazole-based copolymer for high performance polymer solar cells

A highly processable, new semiconducting polymer, PCDTTz, based on alternating thiazolothiazole and carbazole units was synthesized. The new polymer exhibited a field-effect carrier mobility of up to 3.8 × 10(-3) cm(2) V(-1) s(-1) and bulk heterojunction solar cells made from PCDTTz produced a power conversion efficiency of 4.88% under AM 1.5 G (100 mW cm(-2)) conditions.     

A 7.72% efficient dye sensitized solar cell based on novel necklace-like polymer gel electrolyte containing latent chemically cross-linked gel electrolyte precursors

Novel necklace-like polymer gel electrolytes containing latent chemically cross-linked gel electrolyte precursors were prepared for quasi-solid dye sensitized solar cells with a highest efficiency of 7.72% and an active area of 0.25 cm2 under AM1.5 condition at 100 mW cm(-2) irradiation.     

Vertical migration and motility responses in three marine phytoplankton species exposed to solar radiation

Diurnal vertical migration in the water column and the impact of solar radiation on motility were investigated in three marine phytoplankton species: Tetraselmis suecica, Dunaliella salina and Gymnodinium chlorophorum. Cells were exposed to solar radiation either in ultraviolet radiation (UVR, 280-400 nm) transparent Plexiglas tubes (45 cm length, 10 cm diameter) or in quartz tubes under three radiation treatments: PAB (280-700 nm), PA (320-700 nm) and P (400-700 nm). The three species displayed different behavior after exposure to solar radiation. Tetraselmis suecica was insensitive to UVR and under high solar radiation levels, cells accumulated preferentially near the surface. Exposure experiments did not indicate any significant changes in swimming speed nor in the percentage of motile cells after 5 h of exposure. On the other hand, D. salina was sensitive to UV-B displaying a significant decrease in swimming speed and percentage of motile cells after 2-3 h of exposure. Moreover, D. salina cells migrated deep in the water column when irradiance was high. The response of G. chlorophorum was in between that of the other two species tested, with a slight (but significant) decrease in swimming speed and percentage of motile cells in all radiation treatments after 5 h of exposure. While G. chlorophorum cells were more or less homogenously distributed in the water column, a slight (but significant) avoidance response to high radiation was observed at local noon, with cells migrating deep in the water column. Our data clearly indicate that these sub-lethal effects of solar radiation are species-specific and they might have important implications for the aquatic ecosystem.