Fabrication and kinetic studies of a novel silver nanoparticles-glucose oxidase bioconjugate

In this study, a new effective, pH and thermally stable glucose oxidase (GOX)-silver nanoparticles (AgNPs) bioconjugate was designed. AgNPs were synthesized based on the reduction of silver nitrate (AgNO₃) by sodium borohydride (NaBH₄) using two simple procedures. Periodic acid was used for oxidation of the GOX and emission of Lucifer yellow (LyCH) was monitored by spectrofluorometer for evaluation of the oxidation properties of the GOX. The oxidized GOX (Ox-GOX) was immobilized on AgNPs by its sugar moieties via 6-aminohexanoic acid (6AHA) as linker. A sample of the synthesized bioconjugate was loaded on 7.5% non-denaturing polyacrylamide gel electrophoresis (PAGE) to confirm its structural and physical stability. The results from enzymatic activity assay showed that the bioconjugate, GOX and Ox-GOX were similar in stability and activity in acidic and basic pH (optimum pH = 7.0-8.0). Based on the results from thermal stability assay, it was found that the activity of the bioconjugate was found to be higher at lower temperatures. The V_max of the bioconjugate, GOX, and Ox-GOX was estimated as 28.6, 6.2, and 6 IU μg⁻¹ enzyme and the K_m was calculated as 2.7, 9, and 9.5 mM, respectively. It was found that the immobilization method improves the activity and stability of the GOX in different pH and temperatures. As a conclusion, the proposed method opens up the way to the development of a new bioconjugate with potential use in sensing, and many find potential applications in clinical diagnostics, medicine, and industries.     

Effect of silica nanoparticles with different sizes on the catalytic activity of glucose oxidase

In this work we present a strategy for the covalent immobilization of periodate oxidized glucose oxidase () to aminated silica nanoparticles (ASNPs) modified on gold electrodes. Silica nanoparticles greatly enhanced the catalytic ability of GOx toward the oxidation of glucose and improved the electron transfer between the GOx and the electrode surface. ASNPs of varying size—that is 100, 80, 60, and 30 nm—were prepared, and they were used to fabricate biosensors. Electrochemical impedance spectroscopy (EIS) of ferrocyanide followed the assembly process and verified the successful immobilization of on ASNPs modified on gold electrodes. From the analysis of catalytic signals of biosensors using different sizes of ASNPs under the same conditions, the surface concentration of electrically wired enzyme (Γ _ET) was estimated and was found to increase with decreasing ASNPs size. Therefore, the sensitivity of biosensors using smaller ASNPs was higher than that using larger particles. Specifically, we utilized the ASNPs with optimal size (30 nm) to fabricate the glucose biosensor. The resulting electrodes showed a wide linear response to glucose at least to 6 mM and reached 95% of the steady-state current in less than 4 s with a sensitivity of 5.02 μA mM⁻¹ cm⁻² and a detection limit of 0.01 mM. The biosensor also showed excellent stability and good reproducibility. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Amperometric glucose biosensor based on electrodeposition of platinum nanoparticles onto covalently immobilized carbon nanotube electrode

A new amperometric biosensor for glucose was developed based on adsorption of glucose oxidase (GOx) at the gold and platinum nanoparticles-modified carbon nanotube (CNT) electrode. CNTs were covalently immobilized on gold electrode via carbodiimide chemistry by forming amide linkages between carboxylic acid groups on the CNTs and amine residues of cysteamine self-assembled monolayer (SAM). The fabricated GOx/Au_nano/Pt_nano/CNT electrode was covered with a thin layer of Nafion to avoid the loss of GOx in determination and to improve the anti-interferent ability. The immobilization of CNTs on the gold electrode was characterized by quartz crystal microbalance technique. The morphologies of the CNT/gold and Pt_nano/CNT/gold electrodes have been investigated by scanning electron microscopy (SEM), and the electrochemical performance of the gold, CNT/gold, Pt_nano/gold and Pt_nano/CNT/gold electrodes has also been studied by amperometric method. In addition, effects of electrodeposition time of Pt nanoparticles, pH value, applied potential and electroactive interferents on the amperometric response of the sensor were discussed.

The enzyme electrode exhibited excellent electrocatalytic activity and rapid response for glucose in the absence of a mediator. The linear range was from 0.5 to 17.5 mM with correction coefficient of 0.996. The biosensor had good reproducibility and stability for the determination of glucose.     

Comparative evaluation of antibacterial activity of silver nanoparticles synthesized using Rhizophora apiculata and glucose

The focus of the study is to compare the antibacterial efficacy of silver nanoparticles (AgNPs) fabricated by exploiting biological (a mangrove plant, Rhizophora apiculata) and chemical means (Glucose). The synthesized nanoparticles were characterised using UV-visible absorption spectrophotometry (UV-vis), Fourier transform Infra-red Spectroscopy (FTIR) and Transmission electron microscopy (TEM). Biologically synthesized silver nanoparticles (BAgNPs) were observed at 423 nm with particle sizes of 19-42 nm. The chemically synthesized silver nanoparticles (CAgNPs) showed a maximum peak at 422 nm with particle sizes of 13-19 nm. An obvious superiority of the antibacterial potency of BAgNPs compared to the CAgNPs as denoted by the zone of inhibition (ZoI) was noted when the nanoparticles were treated against seven different Microbial Type Culture Collection (MTCC) strains. The current study therefore elucidates that the synthesized AgNPs were efficient against the bacterial strains tested.     

Construction of glucose biosensor based on sorption of glucose oxidase onto multilayers of polyelectrolyte/nanoparticles

A new approach to constructing an enzyme-containing film on the surface of a gold electrode for use as a biosensor is described. A basic multilayer film (BMF) of (PDDA/GNPs) _n /PDDA was first constructed on the gold electrode by electrostatic layer-by-layer self-assembly of poly(diallyldimethylammonium chloride) (PDDA) and gold nanoparticles (GNPs). Glucose oxidase (GOx) was then sorbed into this BMF by dipping the BMF-modified electrode into a GOx solution. The assembly of the BMF was monitored and tested via UV-vis spectroscopy and cyclic voltammetry (CV). The ferrocenemethanol-mediated cyclic voltammograms obtained from the gold electrode modified with the (PDDA/GNPs) _n /PDDA/GOx indicated that the assembled GOx remained electrocatalytically active for the oxidation of glucose. Analysis of the voltammetric signals showed that the surface coverage of active enzyme was a linear function of the number of PDDA/GNPs bilayers. This result confirmed the penetration of GOx into the BMF and suggests that the BMF-based enzyme film forms in a uniform manner. Electrochemical impedance measurements revealed that the biosensor had a lower electron transfer resistance (R _et) than that of a sensor prepared by layer-by-layer assembly of PDDA and GOx, due to the presence of gold nanoparticles. The sensitivity of the biosensor for the determination of glucose, which could be controlled by adjusting the number of PDDA/GNPs bilayers, was investigated.     

A quantitative colorimetric assay of H2O2 and glucose using silver nanoparticles induced by H2O2 and UV

A simple spectrophotometric assay of H2O2 and glucose using Ag nanoparticles has been carried out. Relying on the synergistic effect of H2O2 reduction and ultraviolet （UV） irradiation, Ag nanoparticles with enhanced absorption signals were synthesized. H2O2 served as a reducing agent in the Ag nanoparticles formation in which Ag＋ was reduced to Ago by O2- generated via the decomposition of H2O2 in alkaline media. On the other hand, photoreduction of Ag＋ to Ago under UV irradiations also contributed to the nanoparticles formation. The synthesized nanoparticles were characterized by TEM, XPS, and XRD. The proposed method could determine H2O2 with concentrations ranging from 5.0× 10^-7 to 6.0× 10^-5 tool/ L The detection limit was estimated to be 2.0 × 10^-7 mol/L. Since the conversion of glucose to gluconic acid catalyzed by glucose oxidase was companied with the formation of H2O2, the sensing protocol has been successfully utilized for the determination of glucose in human blood samples. The results were in good agreement with those determined by a local hospital. This colorimetric sensor thus holds great promises in clinical applications.     

Antibacterial,antioxidant and photocatalytic activity of novel Rubus ellipticus leaf mediated silver nanoparticles

Nanotechnology is an emerging field of science that has significant applications in applied sciences. In this study, silver nanoparticles (SNPs) were synthesized utilizing the leaf filtrate of Rubus ellipticus. SNPs were characterized using UV–visible spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction patterns to determine their morphology and chemical composition. The surface plasmon resonance of SNPs revealed a peak at 415 nm. The synthesized SNPs were mainly spherical crystals with an average size of 21.43 nm. When compared to plant extract and positive controls (AgNO₃ and penicillin), SNPs demonstrated significant bactericidal activity against all the tested bacteria (gram-positive and gram-negative). The most effective bactericidal activity was found against Pseudomonas aeruginosa, with a minimum inhibitory concentration of 1.25 µg/mL. In addition, a dose-dependent antioxidant activity of SNPs was found against the 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical with an average IC50 value of 72.84 µg/mL. The photocatalytic activity of Methylene blue (MB) dye decomposition under sunlight was studied. The results showed that MB degraded by 98 % after 150 min in the sun. Overall, the findings of this study indicate that R. ellipticus biosynthesized SNPs may have bactericidal and photocatalytic effects.     

Highly sensitive luminol electrochemiluminescence immunosensor based on ZnO nanoparticles and glucose oxidase decorated graphene for cancer biomarker detection

In this work, we reported a sandwiched luminol electrochemiluminescence (ECL) immunosensor using ZnO nanoparticles (ZnONPs) and glucose oxidase (GOD) decorated graphene as labels and in situ generated hydrogen peroxide as coreactant. In order to construct the base of the immunosensor, a hybrid architecture of Au nanoparticles and graphene by reduction of HAuCl₄ and graphene oxide (GO) with ascorbic acid was prepared. The resulted hybrid architecture modified electrode provided an excellent platform for immobilization of antibody with good bioactivity and stability. Then, ZnONPs and GOD functionalized graphene labeled secondary antibody was designed for fabricating a novel sandwiched ECL immunosensor. Enhanced sensitivity was obtained by in situ generating hydrogen peroxide with glucose oxidase and the catalysis of ZnONPs to the ECL reaction of luminol–H₂O₂ system. The as-prepared ECL immunosensor exhibited excellent analytical property for the detection of carcinoembryonic antigen (CEA) in the range from 10 pg mL⁻¹ to 80 ng mL⁻¹ and with a detection limit of 3.3 pg mL⁻¹ (S N⁻¹ = 3). The amplification strategy performed good promise for clinical application of screening of cancer biomarkers.     

Modification of polypyrrole nanowires array with platinum nanoparticles and glucose oxidase for fabrication of a novel glucose biosensor

A novel glucose biosensor, based on the modification of well-aligned polypyrrole nanowires array (PPyNWA) with Pt nanoparticles (PtNPs) and subsequent surface adsorption of glucose oxidase (GOx), is described. The distinct differences in the electrochemical properties of PPyNWA–GOx, PPyNWA–PtNPs, and PPyNWA–PtNPs–GOx electrodes were revealed by cyclic voltammetry. In particular, the results obtained for PPyNWA–PtNPs–GOx biosensor showed evidence of direct electron transfer due mainly to modification with PtNPs. Optimum fabrication of the PPyNWA–PtNPs–GOx biosensor for both potentiometric and amperometric detection of glucose were achieved with 0.2 M pyrrole, applied current density of 0.1 mA cm⁻², polymerization time of 600 s, cyclic deposition of PtNPs from −200 mV to 200 mV, scan rate of 50 mV s⁻¹, and 20 cycles. A sensitivity of 40.5 mV/decade and a linear range of 10 μM to 1000 μM (R² = 0.9936) were achieved for potentiometric detection, while for amperometric detection a sensitivity of 34.7 μA cm⁻² mM⁻¹ at an applied potential of 700 mV and a linear range of 0.1–9 mM (R² = 0.9977) were achieved. In terms of achievable detection limit, potentiometric detection achieved 5.6 μM of glucose, while amperometric detection achieved 27.7 μM.     

Green fabrication of silver nanoparticles via Ipomea carnea latex extract: Antibacterial activity

A versatile green and nontoxic begin method for bio-reduction of silver nanoparticles (AgNPs) using latex extract of Ipomea carnea was reported. Different instrumental tools were applied to evaluate the formation of AgNPs, as an example UV–Visible spectroscopy (UV–Vis), Fourier transform infra-red (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HR-TEM). The absorption peak of AgNPs obtained at around 413 nm. FTIR study confirmed that the bio-capping components present in latex extract served as reducing and stabilizing agent. The findings of XRD, SEM and HR-TEM images revealed that the formation of crystalline and spherical shape nanoparticles and showed well size distribution with mean size 9.8±0.27 nm. Additionally, the green fabricated AgNPs exhibited considerable zone of inhibition for both Gram-positive and Gram–negative bacteria. The outcome implies that the synthesized AgNPs also showed similar inhibition effect as streptomycin (a common reference antibiotic).     

纳米银自组装电极的制备及对高氯酸二茂铁的电化学响应

采用自组装的方法制备了纳米银粒子修饰金电极,并运用循环伏安法、交流阻抗谱探讨了该电极的电化学特性.研究了高氯酸二茂铁在该修饰电极上的直接电化学行为.实验结果表明,高氯酸二茂铁在该修饰电极上具有良好的电流响应.用示差脉冲法测定高氯酸二茂铁,其氧化峰电流与浓度在4.0×10-6～5.0×10-4 mol/L范围呈良好线性关系,线性方程为:Ip(μA)=0.0236c(μmol/L)-0.0975,线性相关系数为0.9982,检出限为2.3×10-7 mol/L(信噪比为3).     

Direct electrochemistry of glucose oxidase based on its direct immobilization on carbon ionic liquid electrode and glucose sensing

Direct electrochemistry of glucose oxidase (GOx) has been achieved by its direct immobilization on carbon ionic liquid electrode (CILE) with a conductive hydrophobic ionic liquid, 1-butyl pyridinium hexafluophosphate ([BuPy][PF₆]) as binder for the first time. A pair of reversible peaks is exhibited on GOx/CILE by cyclic voltammetry. The peak-to-peak potential separation (ΔE_P) of immobilized GOx is 0.056 V in 0.067 M phosphate buffer solution (pH 6.98) with scan rate of 0.1 V/s. The average surface coverage and the apparent Michaelis–Menten constant are 6.69 × 10⁻¹¹ mol·cm⁻² and 2.47 μM. GOx/CILE shows excellent electrocatalytic activity towards glucose determination in the range of 0.1–800 μM with detection limit of 0.03 μM (S/N = 3). The biosensor has been successfully applied to the determination of glucose in human plasma with the average recoveries between 95.0% and 102.5% for three times determination. The direct electrochemistry of GOx on CILE is achieved without the help of any supporting film or any electron mediator. GOx/CILE is inexpensive, stable, repeatable and easy to be fabricated.     

Antimicrobial properties of biosynthesized silver nanoparticles studied by flow cytometry and related techniques

This work reports the effect of silver bionanoparticles (Bio(AgNPs) synthesized by Actinobacteria CGG 11n on selected Gram (+) and Gram (–) bacteria. Flow cytometry, classical antibiogram method and fluorescent microscopy approach was used for evaluation of antimicrobial activity of Bio(AgNPs) and their combination with antibiotics. Furthermore, the performed research specified the capacity of flow cytometry method as an alternative to the standard ones and as a complementary method to electromigration techniques. The study showed antibacterial activity of both BioAgNPs and the combination of antibiotics/BioAgNPs against all the tested bacteria strains in comparison with a diffusion, dilution and bioautographic methods. The synergistic effect of antibiotics/BioAgNPs combination (e.g. kanamycin, ampicillin, neomycin and streptomycin) was found to be more notable against Pseudomonas aeruginosa representing a prototype of multi‐drug resistant “superbugs” for which effective therapeutic options are very limited.     

Green biosynthesis of silver nanoparticles using Torreya nucifera and their antibacterial activity

Silver nanoparticles were biosynthesized with the aid of a novel and eco-friendly biological material Torreya nucifera. Temperature and extract concentration were found to influence the size and shape of the biosynthesized silver nanoparticles. Morphological images of biosynthesized nanomaterials revealed that the particles are in spherical shape and size ranging between 10 and 125 nm. Crystalline nature of nanoparticles in face centered cubic (fcc) structure was ensured by diffraction pattern peaks corresponding to (1 1 1), (2 0 0), (2 2 0) and (3 1 1) planes. Characterization of the biosynthesized nanoparticles was performed by the X-ray diffraction and Fourier Transform Infrared spectroscopy analyses. FT-IR analysis indicates that nanoparticles are bound to proteins through amine groups of the aminoacid. Furthermore the biosynthesized nanoparticles were found to be highly effective against Salmonella typhimurium bacterium, which validates its potential applications as antibacterial agents in drinking water treatment and in food packagings.     

Mediator-free amperometric determination of glucose based on direct electron transfer between glucose oxidase and an oxidized boron-doped diamond electrode

A mediator-free glucose biosensor, termed a “third-generation biosensor,” was fabricated by immobilizing glucose oxidase (GOD) directly onto an oxidized boron-doped diamond (BDD) electrode. The surface of the oxidized BDD electrode possesses carboxyl groups (as shown by Raman spectra) which covalently cross-link with GOD through glutaraldehyde. Glucose was determined in the absence of a mediator used to transfer electrons between the electrode and enzyme. O₂ has no effect on the electron transfer. The effects of experimental variables (applied potential, pH and cross-link time) were investigated in order to optimize the analytical performance of the amperometric detection method. The resulting biosensor exhibited fast amperometric response (less than 5 s) to glucose. The biosensor provided a linear response to glucose over the range 6.67×10⁻⁵ to 2×10⁻³ mol/L, with a detection limit of 2.31×10⁻⁵ mol/L. The lifetime, reproducibility and measurement repeatability were evaluated and satisfactory results were obtained.     

Investigation of the origin of the glucose response in a glucose oxidase|polyaniline system

The origin of the signal seen in response to glucose in a polyaniline|glucose oxidase system is explored by immittance spectroscopy, by comparing data from an equivalent circuit model and the parameters obtained from a solution of the faradaic branch of the frequency dispersion for a coupled chemical—electrochemical reaction mechanism. It was shown that an RC subcircuit in the equivalent circuit model was sensitive to peroxide concentration, and the interaction of peroxide with polyaniline at potentials where it either oxidised or reduced the polyaniline was discussed. This information was used to compare the data obtained in a bulk and entrapped glucose oxidaselglucose system, and it was seen that the origin of the response could not be fully attributed to peroxide interaction in the latter case. Under anaerobic conditions with entrapped enzyme, it was proposed that a complex between the gluconolactone product of the enzyme reaction and the polymer leads to a more conducting polymer, with inherent charge compensation, and this results in the observed enhanced current signal.     

Development of amperometric glucose biosensor through immobilizing enzyme in a Pt nanoparticles/mesoporous carbon matrix

Pt nanoparticles were deposited on mesoporous carbon material CMK-3. Glucose oxidase (GOx) was immobilized in the resulting Pt nanoparticles/mesoporous carbon (Pt/CMK-3) matrix, and then the mixture was cast on a glassy carbon electrode (GCE) using gelatin as a binder. The glucose biosensor exhibited excellent current response to glucose after cross-linking with glutaraldehyde. At 0.6V (vs. SCE) the response current was linear to glucose concentration in the range of 0.04-12.2mM. The response time (time for achieving 95% of the maximum current) was 15s and the detection limit (S/N=3) was 1 microM. The Michaelis-Menten constant (K(m)(app)) and the maximum current density (i(max)) were 10.8 mM and 908 microAcm(-2), respectively. The activation energy of the enzymatic reaction was estimated to be 22.54 kJ mol(-1). The biosensor showed good stability. It achieved the maximum response current at about 52 degrees C and retained 95.1% of its initial response current after being stored for 30 days. In addition, some fabrication and operation parameters for the biosensor were optimized in this work. The biosensor was used to monitor the glucose levels of serum samples after being covered with an extra Nafion film to improve its anti-interferent ability and satisfied results were obtained.     

银纳米修饰电极的制备及其对灿烂甲酚蓝的催化研究

用共价修饰法制备了银纳米修饰电极,通过透射电子显微镜(TEM)、紫外可见光谱和电化学交流阻抗谱进行了表征和研究。实验表明,该修饰电极对灿烂甲酚蓝(BCB)的电化学氧化还原有较强的催化作用,氧化峰电流与其浓度在4.0×10-7～2.1×10-4mol L范围内成线性关系,相关系数为0.9989,检出限为1.5×10-8mol L。     

A simple method to fabricate a chitosan-gold nanoparticles film and its application in glucose biosensor

A novel film of chitosan-gold nanoparticles is fabricated by a direct and facile electrochemical deposition method and its application in glucose biosensor is investigated. HAuCl(4) solution is mixed with chitosan and electrochemically reduced to gold nanoparticles, which can be stabilized by chitosan and electrodeposited onto glassy carbon electrode surfaces along with the electrodeposition of chitosan. Then a model enzyme, glucose oxidase (GOD) is immobilized onto the resulting film to construct a glucose biosensor through self-assembly. The resulting modified electrode surfaces are characterized with both AFM and cyclic voltammetry. Effects of chitosan and HAuCl(4) concentration in the mixture together with the deposition time and the applied voltage on the amperometric response of the biosensor are also investigated. The linear range of the glucose biosensor is from 5.0 x 10(-5) approximately 1.30 x 10(-3) M with a Michaelis-Menten constant of 3.5 mM and a detection limit of about 13 microM.     

Phytogenic-mediated silver nanoparticles using Persicaria hydropiper extracts and its catalytic activity against multidrug resistant bacteria

Multidrug resistance (MDR) is one of the major global threats of this century. So new innovative approaches are needed for the development of existing antibiotics to limit antibacterial resistance. The current study was aimed to utilize extracts of root, stem, and leaves of Persicaria hydropiper for the synthesis of silver nanoparticles (AgNPs) using standard procedure. Synthesis of AgNPs was evident from the change in color of the solution to dark brownish and then it was further revealed by UV–Vis and Fourier Transformed Infrared Spectroscopy (FTIR). UV–Vis spectroscopy has revealed absorbance peak at 370 nm while, FTIR spectrum displayed that aromatics amines were used as reducing agent in the fabrication of AgNPs. In addition, Scanning Electron Microscopy (SEM micrograph) displaying tetrahedron, spherical and oval shapes of synthesized AgNPs whereas, average size of synthesized AgNPs was found in the range of 32–77 nm. Beside this, it was also observed that the potency of antibiotics against MDR bacteria increased after coating with synthesized AgNPs i.e., the potency of Ceftazidime and Ciprofloxacin increased up to 450% and 500% against Bacillus respectively while, the potency of Gentamicin, Vancomycin and Linezolid increased up to 150%, 200% and 58% against Bacillus, Staphylococcus, and Proteus species respectively. Furthermore, it was concluded that utilizing AgNPs in combination with commercially available antibiotics would provide an alternate therapy for the treatment of infectious diseases caused by MDR bacteria.