Quartzite an efficient adsorbent for the removal of anionic and cationic dyes from aqueous solutions

Quartzite obtained from local source was investigated for the removal of anionic dye congo red (CR) and cationic dye malachite green (MG) as an adsorbent from aqueous solution in batch experiment. The adsorption process was studied as a function of dye concentration, contact time, pH and temperature. Adsorption process was described well by Langmuir and Freundlich isotherms. The adsorption capacity remained 666.7 mg/g for CR dye and 348.125 mg/g for MG dye. Data was analyzed thermodynamically, ΔH⁰ and ΔG⁰ values proved that adsorption of CR and MG is an endothermic and spontaneous process. Adsorption data fitted best in the pseudo-first order kinetic model. The adsorption data proved that quartzite exhibits the best adsorption capacity and can be utilized for the removal of anionic and cationic dyes.     

Removal of cationic methylene blue and malachite green dyes from aqueous solution by waste materials of Daucus carota

In present study adsorption capacity of waste materials of Daucus carota plant (carrot stem powder: CSP and carrot leaves powder: CLP) was explored for the removal of methylene blue (MB) malachite green (MG) dye from water. The morphology and functional groups present were investigated by scanning electron microscope (SEM) and Fourier transform infrared (FTIR) spectroscopy. The operating variables studied were pH, adsorbent dose, ionic strength, initial dye concentration, contact time and temperature. Equilibrium data were analysed using Langmuir and Freundlich isotherm models and monolayer adsorption capacity of adsorbents were calculated. Kinetic data were studied using pseudo-first and pseudo-second order kinetic models and the mechanism of adsorption was described by intraparticle diffusion model.Various thermodynamic parameters such as enthalpy of adsorption ΔH°, free energy change ΔG° and entropy ΔS° were estimated. Negative value of ΔH° and negative values of ΔG° showed that the adsorption process was exothermic and spontaneous. Negative value of entropy ΔS° showed the decreased randomness at the solid–liquid interface during the adsorption of MB and MG onto CSP and CLP.     

Clay and charcoal composites: characterisation and application of factorial design analysis for dye adsorption

The characterisation of smectite clay, charcoal and prepared clay-charcoal composites was carried out through the X-ray diffractometry, energy dispersive X-ray spectroscopy (EDS), simultaneous thermal analysis (TGA/DTA), infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The analysis revealed the composites to have different characteristics from the precursor clay and charcoal, and a peak displacement (d ₀₀₁) was observed through the X-ray diffraction; this suggests the incorporation of charcoal into the clay lamellas and the formation of a new phase. Tests of adsorption with methylene blue dye were also carried out to evaluate the percentage of dye removal by the adsorbent, in which the composites presented better results than charcoal, indicating great potential for industrial use. A 2³ factorial design was employed to evaluate the influence of temperature, ionic strength and pH on the adsorption of methylene blue using the AV₅₀ composite that presented the best adsorption efficiency.     

Removal of the Malachite Green (MG) Dye From Textile Industrial Wastewater Using the Polyurethane Foam Functionalized with Salicylate

Polyurethane foam was chemically functionalized with salicylate through the –N?N– group generating a stable chelating sorbent PUFSalicylate (PUFS) for being used as a low cost, available, and renewable adsorbent for the removal of Malachite Green (MG) textile dye from aqueous solutions. Batch experiments were carried out for sorption kinetics and isotherms. The synthesized adsorbent was characterized by Fourier Transform Infrared Spectroscopy (FTIR), scanning electron microcopy (SEM), and X-ray diffraction. The present study is related to the removal of colorants. Adsorption of MG dye on PUFS was studied as a function of different experimental parameters such as temperature, contact time, amount of adsorbent, and pH. A spectrophotometer technique was used for measuring the extent of adsorption. The data were fitted with Langmuir and Freundlich isotherm equations and their corresponding constants were calculated from the slopes and intercepts of their respective lines. From the measured adsorption isotherms at different temperatures 298, 308, and 318 K, it was found that adsorption increases as the temperature increases within this range. The measured adsorption amount of MG dye increases with increased pH.     

Garlic Root Biomass as Novel Biosorbents for Malachite Green Removal: Parameter Optimization,Process Kinetics and Toxicity Test

The potential of the agricultural waste garlic root to remove malachite green(MG) from aqueous solutions was evaluated. The adsorption of this dye onto garlic root was confirmed by means of Fourier transform infrared analysis(FTIR) and scanning electron microscopy(SEM). The equilibrium data fitted well into the Langmuir mo- del(R²>0.99), and the adsorption kinetics followed the pseudo-second-order equation(R²>0.99). The maximum adsorption capacities of MG onto the adsorbent were 172.41 and 232.56 mg/g with the addition of 1 and 2 g/L garlic root, respectively. The optimal conditions for MG removal were established on the basis of orthogonal experiments(OA₁₆ matrix). The concentrations of both MG and garlic root significantly affected the removal efficiency. The acute toxicity test indicated that the treated MG solutions were less toxic than the parent solutions. These results suggest that garlic root is a potential low-cost adsorbent for removing dye from industrial wastewater.     

Fe3O4-CuO-activated carbon composite as an efficient adsorbent for bromophenol blue dye removal from aqueous solutions

Dye wastewater from industries is posing tremendous health hazards. The lethal dyes can be eliminated using nanomaterials and scientific approach like adsorption which is facile, cheap, safe as well as ecofriendly. Fe₃O₄-CuO-AC composite was prepared by a hydrothermal method and used for the removal of dyes in wastewater. The composite material was characterized by various techniques such as XRD, SEM, EDS, TEM and FT-IR. The Fe₃O₄-CuO-AC composite was used to treat five types of dyes in water. Fe₃O₄-CuO-AC composite showed the highest adsorption capability for bromophenol blue (BPB) dye. The effects of initial concentration, pH, the amount of adsorbent and temperature were also studied. The optimum conditions were found to be 20 ppm dye concentration, pH 9, an adsorbent dose of 0.06 gL^─1 at 65 °C. A removal efficiency of 97% was obtained for BPB dye during 120 min of adsorption. Kinetic studies indicated that a pseudo-second order is the most suitable model for the adsorption process. The Fe₃O₄-CuO-AC composite showed better adsorption capacity as compare to Fe₃O₄-AC except for the Methyl green dye. The maximum adsorption capacity was found to be 88.60 mg/g for BPB. Additionally, the thermodynamic parameters (ΔS°, ΔH° and ΔG°) showed that the process was spontaneous and exothermic. All the above results revealed that the Fe₃O₄-CuO-AC compositecan be an effective adsorbent for removing dyes from wastewater.     

Effect of acid and alkali treatments of a forest waste,Pinus brutia cones,on adsorption efficiency of methyl green

The removal of methyl green (MG) dye from aqueous solutions using acid- or alkali-treated Pinus brutia cones (PBH and PBN) waste was investigated in this work. Adsorption removal of MG was conducted at natural pH, namely, 4.5 ± 0.10 for PBH and near 4.8 ± 0.10 for PBN. The pseudo-second-order model appeared to be the most appropriate to describe the adsorption process of MG on both PBN and PBH with a correlation coefficient R² > 0.999. Among the tested isotherm models, the Langmuir isotherm was found to be the most relevant to describe MG sorption onto modified P. brutia cones with a correlation factor R² > 0.999. The ionic strength (presence of other ions: Cl^?, Na⁺, and SO₄^2?) also influences the adsorption due to the change in the surface properties; it had a negative impact on the adsorption of MG on these two supports. A reduction of 68.5% of the adsorption capacity for an equilibrium dye concentration Ce of 30 mg/L was found for the PBH; while with PBN no significant influence of the ionic strength on adsorption was observed, especially in the presence of NaCl for dye concentrations superior to 120 mg L^?1.     

Facile Synthesis of ZIF-67 for the Adsorption of Methyl Green from Wastewater: Integrating Molecular Models and Experimental Evidence to Comprehend the Removal Mechanism

Organic dyes with enduring colors which are malodorous are a significant source of environmental deterioration due to their virulent effects on aquatic life and lethal carcinogenic effects on living organisms. In this study, the adsorption of methyl green (MG), a cationic dye, was achieved by using ZIF-67, which has been deemed an effective adsorbent for the removal of contaminants from wastewater. The characterization of ZIF-67 was done by FTIR, XRD, and SEM analysis. The adsorption mechanism and characteristics were investigated with the help of control batch experiments and theoretical studies. The systematical kinetic studies and isotherms were sanctioned with a pseudo-second-order model and a Langmuir model (R² = 0.9951), confirming the chemisorption and monolayer interaction process, respectively. The maximum removal capacities of ZIF-67 for MG was 96% at pH = 11 and T = 25 °C. DFT calculations were done to predict the active sites in MG by molecular electrostatic potential (MEP). Furthermore, both Molecular dynamics and Monte Carlo simulations were also used to study the adsorption mechanism.     

Methylene blue removal from aqueous solution by magnetic clinoptilolite/chitosan/EDTA nanocomposite

In this study, clinoptilolite as a natural zeolite which was magnetized using precipitation of maghemite nanoparticles was coated by chitosan and then modified by thylenediamine tetra-acetic acid to add functional groups and its performance in the removal of toxic methylene blue from aqueous solution was investigated. Synthesized magnetic nanocomposite was characterized by VSM, XRD, SEM, and FTIR analyses. The saturation magnetization of the final nanocomposite was obtained as 22.2 emu/g. In addition, the factors affecting adsorption process and its optimization were investigated using response surface methodology and central composite design. Data obtained by different isotherm, adsorption kinetic and thermodynamic models were also studied. The results showed good agreement of these data with the Freundlich isotherm model (R ² = 0.99), and it was found that adsorption follows the second-order kinetics model (R ² = 1). Negative values of ΔG and positive values of ΔH obtained from this adsorption thermodynamic study revealed that the methylene blue adsorption process is exothermic and spontaneous. The optimum conditions to ensure maximum adsorption efficiency were determined, and included pH = 5.54, adsorbent amount of 0.03 g, temperature of 31.18 °C, and initial solution concentration of 16.21 mg/l which resulted in a removal efficiency of 99.44%. The results indicated that this nanocomposite can be used as a proper adsorbent for adsorbing methylene blue and other dye contaminants.     

Surface characterization of dead microalgae‐based biomass using methylene blue adsorption

To examine the surface characterization of dead chlorella biomass, the chlorella‐manufacturing residue was used as an adsorbent for removal of cationic dye (i.e. methylene blue) from aqueous solutions at low concentrations (less than 5 mg dm^?3). It could be elucidated by considering the ion‐exchange adsorption phenomena on the negative‐charged surface of the adsorbent based on the characterization of functional groups by the Fourier transform infrared (FTIR) analysis. On the basis of monolayer dye adsorption capacity, the specific surface area of this spherical biomass powder was estimated as 11.8 m² g^?1, which was consistent with the rigid cell wall structure of the dead chlorella particles as shown in the SEM observation. Copyright © 2010 John Wiley & Sons, Ltd.     

ZIF-8/改性聚丙烯腈电纺纳米纤维的制备及其高效去除水中孔雀石绿

通过原位生长方法,将最常见的金属有机骨架(MOFs)——沸石咪唑酯骨架材料(ZIF-8)固定到羧甲基化聚丙烯腈静电纺丝纳米纤维(PAN-COOH NFs)表面,得到ZIF-8/PAN-COOH NFs。通过扫描电子显微镜(SEM)、能量色散光谱(EDS)、X射线粉末衍射(XRD)和傅里叶变换红外光谱(FTIR)对合成的ZIF-8/PAN-COOH NFs形貌和结构进行表征,并深入研究ZIF-8/PAN-COOHNFs从废水中去除孔雀石绿(MG)的性能。研究发现： ZIF-8/PAN-COOH NFs对MG的吸附符合拟二级动力学方程,吸附过程可采用Langmuir等温线模型拟合,其对MG的最大吸附容量可达3 604 mg·g^-1。此外,ZIF-8/PAN-COOH NFs在染料吸附实验中表现出良好的分离功能和重复利用性。     

Functionalized MgO,CeO<Subscript>2</Subscript> and ZnO nanoparticles with humic acid for the study of nitrate adsorption efficiency from water

In this study, the removal of nitrate using ZnO, MgO, and CeO₂ nanoparticles (NPs) modified by humic acid from water was tested. Nanoparticles were modified by humic acid using the microwave-assisted technique and then modified ZnO (Zn–H), modified MgO (Mg–H), and modified CeO₂ (Ce–H) were characterized through SEM, EDX, FTIR, and XRD analysis. Several important parameters influencing the removal of nitrate such as contact time, pH, adsorbent dosage and temperature were explored systematically by batch experiments. Isotherm studies were set up with the following optimum conditions: pH?=?5, adsorbent concentration of 1 g L^?1, 180 min and 25 °C. The results revealed that the adsorption were best fitted to pseudo-second order and simple Elovich kinetics models. Langmuir, Freundlich and linear adsorption models were fitted to describe adsorption isotherms and constants. The isotherm analysis indicated that the adsorption data can be represented by both Freundlich and linear isotherm models. The maximum adsorption capacity (q_m) was obtained at 55.1, 74.2 and 75.8 mg g^?1 for Zn–H, Ce–H, and Mg–H, respectively. The thermodynamic parameters such as free energy, enthalpy and entropy of adsorption were obtained. From the thermodynamic parameters, it is suggested that the adsorption of nitrate on modified NPs (MNPs) followed the exothermic and spontaneous processes. The obtained results showed that the MNPs were efficient adsorbents for removing nitrate from aqueous media.     

Facile synthesis of mesoporous magnesium oxide–graphene oxide composite for efficient and highly selective adsorption of hazardous anionic dyes

Mesoporous magnesium oxide–graphene oxide composite (MGC) has been synthesized using a facile post-immobilization method by mixing pre-synthesized magnesium oxide (MgO) with graphene oxide (GO). MgO used for fabrication of the composite has been synthesized using an environment-friendly method involving gelatin as a template. XRD, Raman and EDX analyses have confirmed the presence of MgO and GO in the composite. FTIR and SEM analyses of synthesized MGC have further elucidated the surface functionalities and morphology, respectively. Using N₂ adsorption–desorption isotherm, BET surface area of MGC has been calculated to be 55.9 m² g^?1 and BJH analysis confirmed the mesoporous nature of MGC. The application of synthesized MGC as a selective adsorbent for various toxic anionic dyes has been explored. Batch adsorption studies have been carried out to investigate the influence of different adsorption parameters on the adsorption of two anionic dyes: indigo carmine (IC) and orange G (OG). The maximum adsorption capacities exhibited by MGC for IC and OG are 252.4 and 24.5 mg g^?1, respectively. Plausible mechanism of dye adsorption has been explained in detail using FTIR analysis. In a mixture of cationic and anionic dyes, MGC selectively adsorbs anionic dyes with high separation factors, while in binary mixtures of anionic dyes, both dyes are adsorbed efficiently. Thus, MGC has been shown to be a potential adsorbent for the selective removal of anionic dyes from wastewater.

     

ZIF-8/改性聚丙烯腈电纺纳米纤维的制备及其高效去除水中孔雀石绿

通过原位生长方法，将最常见的金属有机骨架（MOFs）——沸石咪唑酯骨架材料（ZIF‐8）固定到羧甲基化聚丙烯腈静电纺丝纳米纤维（PAN‐COOH NFs）表面，得到ZIF‐8/PAN‐COOH NFs。通过扫描电子显微镜（SEM）、能量色散光谱（EDS）、X射线粉末衍射（XRD）和傅里叶变换红外光谱（FTIR）对合成的ZIF‐8/PAN‐COOH NFs形貌和结构进行表征，并深入研究ZIF‐8/PAN‐COOHNFs从废水中去除孔雀石绿（MG）的性能。研究发现： ZIF‐8/PAN‐COOH NFs对MG的吸附符合拟二级动力学方程，吸附过程可采用Langmuir等温线模型拟合，其对MG的最大吸附容量可达3 604 mg·g^-1。此外，ZIF‐8/PAN‐COOH NFs在染料吸附实验中表现出良好的分离功能和重复利用性。     

Preparation and adsorption mechanism of rare earth-doped adsorbent for arsenic(V) removal from groundwater

Human poisoning and death from arsenic(As) have occurred as a result of drinking water contaminated with As in some regions and countries, such as Taiwan, Chile, Bangladesh, and In-dia[1]. Chronic arsenism poses a serious health problem in China also[2]. If China lowers its current drinking water standard of As from 0.05 to 0.01 mg/L[3], a level adopted by WHO[4] and some industrialized countries[5], the population affected will increase significantly. It is of great impor-tance to develo…     

Deep adsorptive desulfurization over Cu,Ce bimetal ion-exchanged Y-typed molecule sieve

In this paper, Ce(IV)–Y, Cu(II)–Y and Cu(II)–Ce(IV)–Y adsorbents were prepared by the liquid-phase ion-exchange Y zeolites with combined Cu and Ce ions at low temperature and room pressure. The adsorbents were characterized by means of X-ray diffraction, N₂-adsorption specific surface area measurements (BET), X-ray photoelectron spectroscopy, Pyridine adsorption infrared spectroscopy and Fourier transform infrared. The adsorptive desulfurization properties of these three adsorbents were studied in a fixed-bed unit through a model gasoline which made up of 1-octane solution of the refractory sulfur compounds (Such as thiophene and benzothiophene) and a certain amount of toluene or cyclohexene. The results indicate that Cu(II)–Ce(IV)–Y bind the organic sulfur compounds through two types of adsorption modes: π-complexation and direct sulfur–adsorbent interaction. The adsorption selectivity of sulfur compounds onto Cu(II)–Ce(IV)–Y decreased in the order: benzothiophene > 2,5-dimethylthiophene > 3-methylthiophene > thiophene. The effect of competition components on the metal ion-exchanged Y zeolites for sulfur removal in the order: cyclohexene > toluene. The Cu(II)–Ce(IV)–Y possesses the high sulfur adsorption capacity similar to Cu(II)–Y and high selectivity for sulfur compounds similar to Ce(IV)–Y, which can be attributed to the synergistic interaction between Cu²⁺ and Ce⁴⁺.     

One-pot synthesis of a novel magnetic activated carbon/clay composite for removal of heavy metals from aqueous solution

Abstract

In the present work, a novel composite consisting of magnetite, activated carbon from spent coffee grounds and natural clay (MACCC) was prepared by a one-pot synthesis method via a simultaneous activation and magnetization processes. Various techniques (XRD, FTIR, SEM, TEM, EDX, BET) were utilized to characterize the synthesized composite before utilizing it as an adsorbent for removal of Cu(II), Ni(II) and Pb(II) ions from aqueous solutions. Conditions for removal of heavy metals were thoroughly optimized as 25?°C, pH of 5.5, adsorbent dosage of 2?g L^?1, and a contact time of 60?min. Three models of pseudo first-, second-order and intraparticle diffusion as well as three models of Langmuir, Freundlich, and Temkin were used to analyze kinetics and isotherms of the adsorption process. Thermodynamics was discussed completely. Regeneration and recyclability of the adsorbent were also evaluated. Based on the analysis of experimental results, a possible adsorption mechanism of heavy metals onto the synthesized composite was proposed. The maximum capacities caculated from Langmuir model followed the order of Pb(II) > Cu(II) > Ni(II) as 143.56, 96.16 and 84.86?mg·g^?1, respectively. The overall results indicated that MACCC is a potential adsorbent for removal of toxic Pb(II), Cu(II) and Ni(II) ions from wastewater due to simple preparation, high removal efficiency and good recyclability.     

Synthesis and characterisation of magnetic activated carbon/diopside nanocomposite for removal of reactive dyes from aqueous solutions: experimental design and optimisation

In this work, a series of magnetic activated carbon/nanodiopside (Fe₃O₄/AC/Diop) nanocomposites were synthesised and used for the removal of reactive green KE-4BD dye from the aqueous solution. After preparation of nanodiopside by sol-gel method and activated carbon from coconut husk, first, Fe₃O₄/AC composite was prepared by in situ synthesis of Fe₃O₄ nanoparticles between activated carbon pores, and then, different percentages of Fe₃O₄/AC/Diop nanocomposites were prepared by simple mixing of Fe₃O₄/AC composite and Diop in ethanol. Formation of Fe₃O₄/AC and Fe₃O₄/AC/Diop composites was characterised by FTIR, field emission scanning electron microscopy, BET, XRD and vibrating sample magnetometer analyses. Thermogravimetric analysis was used to show the adsorption capacity of the adsorbent more accurately. Effects of amount of adsorbent, initial pH, contact time and dye concentration on reactive green dye removal were also studied using central composite design. Optimal conditions for maximum reactive green KE-4BD dye adsorption (98.35%) process were as follows: pH= 4.90, adsorbent amount: 0.015 g, dye concentration: 37.17 mg/L and contact time: 10.12 min, respectively. In addition, the adsorption kinetics, thermodynamics and isotherms were examined. Adsorption isotherms (q_max: 344.827 mg/g), kinetics and thermodynamics were demonstrated that the sorption processes were better described by the pseudo-second-order equation and the Langmuir equation.     

Kinetic of Patent Blue VF Adsorption from Aqueous Solution on Activated Bone Charcoal

The effect of temperature of activation on bone charcoal, used as adsorbent for the removal of Patent Blue VF from water solutions was studied. The adsorbent was characterized by FTIR, XRD, SEM and EDS. The kinetic of adsorption of dye was carried out at 10 °C and 45 °C. Carbonization temperature (600–1000 °C) of the adsorbent has significant effect on the removal of dye from water solutions. The first order kinetic, Elovich, Bangham, parabolic diffusion and power function equations were found to fit the kinetic data. Activation energies of adsorption (Δ≠) have higher values for the charcoal activated at high temperatures and the other thermodynamic parameters like ΔH≠, ΔS≠ and ΔG≠ were also found.