Discrete quasi-Einstein metrics and combinatorial curvature flows in 3-dimension

Motivated by the definition of combinatorial scalar curvature given by Cooper and Rivin, we introduce a new combinatorial scalar curvature. Then we define the discrete quasi-Einstein metric, which is a combinatorial analogue of the constant scalar curvature metric in smooth case. We find that discrete quasi-Einstein metric is critical point of both the combinatorial Yamabe functional and the quadratic energy functional we defined on triangulated 3-manifolds. We introduce combinatorial curvature flows, including a new type of combinatorial Yamabe flow, to study the discrete quasi-Einstein metrics and prove that the flows produce solutions converging to discrete quasi-Einstein metrics if the initial normalized quadratic energy is small enough. As a corollary, we prove that nonsingular solution of the combinatorial Yamabe flow with nonpositive initial curvatures converges to discrete quasi-Einstein metric. The proof relies on a careful analysis of the discrete dual-Laplacian, which we interpret as the Jacobian matrix of curvature map.     

Extremal Metrics for Quadratic Functional of Scalar Curvature on Closed 3-Manifolds

In this paper, we first show the global existence of the three-dimensionalCalabi flow on any closed 3-manifold with an arbitrary background metric g ₀. Second, we show the asymptotic convergence of a subsequence ofsolutions of the Calabi flow on a closed 3-manifold with Yamabe constant Q < 0 or Q = 0 and Q > 0, up to conformal transformations. With itsapplication, we prove the existence of extremal metrics for quadraticfunctional of scalar curvature on a closed 3-manifold which is served asan extension of the Yamabe problem on closed manifolds. Moreover, theexistence of extremal metrics on complete noncompact 3-manifolds willdiscuss elsewhere.     

The Yamabe problem for almost Hermitian manifolds

The conformal class of a Hermitian metric g on a compact almost complex manifold (M^2m, J) consists entirely of metrics that are Hermitian with respect to J. For each one of these metrics, we may define a J-twisted version of the Ricci curvature, the J-Ricci curvature, and its corresponding trace, the J-scalar curvature s^J. We ask if the conformal class of g carries a metric with constant s^J, an almost Hermitian version of the usual Yamabe problem posed for the scalar curvature s. We answer our question in the affirmative. In fact, we show that (2m−1)s^J−s=2(2m−1)W(ω, ω), where W is the Weyl tensor and ω is the fundamental form of g. Using techniques developed for the solution of the problem for s, we construct an almost Hermitian Yamabe functional and its corresponding conformal invariant. This invariant is bounded from above by a constant that only depends on the dimension of M, and when it is strictly less than the universal bound, the problem has a solution that minimizes the almost complex Yamabe functional. By the relation above, we see that when W (ω, ω) is negative at least one point, or identically zero, our problem has a solution that minimizes the almost Hermitian Yamabe functional, and the universal bound is reached only in the case of the standard 6-sphere equipped with a suitable almost complex structure. When W(ω, ω) is non-negative and not identically zero, we prove that the conformal invariant is strictly less than the universal bound, thus solving the problem for this type of manifolds as well. We discuss some applications.     

Regge?s Einstein-Hilbert functional on the double tetrahedron

The double tetrahedron is the triangulation of the three-sphere gotten by gluing together two congruent tetrahedra along their boundaries. As a piecewise flat manifold, its geometry is determined by its six edge lengths, giving a notion of a metric on the double tetrahedron. We study notions of Einstein metrics, constant scalar curvature metrics, and the Yamabe problem on the double tetrahedron, with some reference to the possibilities on a general piecewise flat manifold. The main tool is analysis of Regge?s Einstein-Hilbert functional, a piecewise flat analogue of the Einstein-Hilbert (or total scalar curvature) functional on Riemannian manifolds. We study the Einstein-Hilbert-Regge functional on the space of metrics and on discrete conformal classes of metrics.     

Remarks on scalar curvature of Yamabe solitons

In this article, we consider the scalar curvature of Yamabe solitons. In particular, we show that, with natural conditions and non-positive Ricci curvature, any complete Yamabe soliton has constant scalar curvature, namely, it is a Yamabe metric. We also show that a complete non-compact Yamabe soliton with the quadratic decay at infinity of its Ricci curvature has non-negative scalar curvature. A new proof of Kazdan?CWarner condition is also presented.     

On bifurcation of solutions of the Yamabe problem in product manifolds

We study local rigidity and multiplicity of constant scalar curvature metrics in arbitrary products of compact manifolds. Using (equivariant) bifurcation theory we determine the existence of infinitely many metrics that are accumulation points of pairwise non-homothetic solutions of the Yamabe problem. Using local rigidity and some compactness results for solutions of the Yamabe problem, we also exhibit new examples of conformal classes (with positive Yamabe constant) for which uniqueness holds.     

Q Curvature on a Class of 3‐Manifolds

Motivated by the strong maximum principle for the Paneitz operator in dimension 5 or higher found in a preprint by Gursky and Malchiodi and the calculation of the second variation of the Green's function pole's value on ??³ in our preprint, we study the Riemannian metric on 3‐manifolds with positive scalar and Q curvature. Among other things, we show it is always possible to find a constant Q curvature metric in the conformal class. Moreover, the Green's function is always negative away from the pole, and the pole's value vanishes if and only if the Riemannian manifold is conformal diffeomorphic to the standard ??³. Compactness of constant Q curvature metrics in a conformal class and the associated Sobolev inequality are also discussed. © 2016 Wiley Periodicals, Inc.     

An optimal parabolic estimate and its applications in prescribing scalar curvature on some open manifolds with Ricci \ge 0

By establishing an optimal comparison result on the heat kernel of the conformal Laplacian on open manifolds with nonnegative Ricci curvature, (a) we show that many manifolds with positive scalar curvature do not possess conformal metrics with scalar curvature bounded below by a positive constant; (b) we identify a class of functions with the following property: If the manifold has a scalar curvature in this class, then there exists a complete conformal metric whose scalar curvature is any given function in this class. This class is optimal in some sense; (c) we have identified all manifolds with nonnegative Ricci curvature, which are “uniformly” conformal to manifolds with zero scalar curvature. Even in the Euclidean case, we obtain a necessary and sufficient condition under which the main existence results in [Ni1] and [KN] on prescribing nonnegative scalar curvature will hold. This condition had been sought in several papers in the last two decades. Received: 11 November 1998 / Revised: 7 April 1999     

Localized gluing of Riemannian metrics in interpolating their scalar curvature

We show that two smooth nearby Riemannian metrics can be glued interpolating their scalar curvature. The resulting smooth metric is the same as the starting ones outside the gluing region and has scalar curvature interpolating between the original ones. One can then glue metrics while maintaining inequalities satisfied by the scalar curvature. We also glue asymptotically Euclidean metrics to Schwarzschild ones and the same for asymptotically Delaunay metrics, keeping bounds on the scalar curvature, if any. This extends the Corvino gluing near infinity to non-constant scalar curvature metrics.     

The Calabi flow on Kähler Surfaces with bounded Sobolev constant (I)

We consider the formation of singularities along the Calabi flow by assuming the uniformly bounded Sobolev constants. On Kähler surfaces we prove that if curvature tensor is not uniformly bounded, then one can form a singular model called deepest bubble; such deepest bubble has to be a scalar flat ALE Kähler metric. In certain Kähler classes on toric Fano surfaces, the Sobolev constants are a priori bounded along the Calabi flow with small Calabi energy. We can also show in certain cases no deepest bubble can form along the flow. It follows that the curvature tensor is uniformly bounded and the flow exists for all time and converges to an extremal metric subsequently. To illustrate our results more clearly, we focus on an example on \({\mathbb{CP}^2}\) blown up three points at generic position. Our result also implies existence of constant scalar curvature metrics on \({\mathbb{CP}^2}\) blown up three points at generic position in the Kähler classes where the exceptional divisors have the same area.     

Compact complex surfaces and constant scalar curvature Kähler metrics

In this article, I prove the following statement: Every compact complex surface with even first Betti number is deformation equivalent to one which admits an extremal Kähler metric. In fact, this extremal Kähler metric can even be taken to have constant scalar curvature in all but two cases: the deformation equivalence classes of the blow-up of \({\mathbb {P}_2}\) at one or two points. The explicit construction of compact complex surfaces with constant scalar curvature Kähler metrics in different deformation equivalence classes is given. The main tool repeatedly applied here is the gluing theorem of C. Arezzo and F. Pacard which states that the blow-up/resolution of a compact manifold/orbifold of discrete type, which admits cscK metrics, still admits cscK metrics.     

Strongly Extremal Kähler Metrics

On a compact complex manifold (M, J) of the Kähler type, we consider the functional defined by the L²-norm of the scalar curvature with its domain the space of Kähler metrics of fixed total volume. We calculate its critical points, and derive a formula that relates the Kähler and Ricci forms of such metrics on surfaces. If these metrics have a nonzero constant scalar curvature, then they must be Einstein. For surfaces, if the scalar curvature is nonconstant, these critical metrics are conformally equivalent to non-Kähler Einstein metrics on an open dense subset of the manifold. We also calculate the Hessian of the lower bound of the functional at a critical extremal class, and show that, in low dimensions, these classes are weakly stable minima for the said bound. We use this result to discuss some applications concerning the two-points blow-up of CP².     

First eigenvalues of geometric operators under the Yamabe flow

Suppose \((M,g_0)\) is a compact Riemannian manifold without boundary of dimension \(n\ge 3\). Using the Yamabe flow, we obtain estimate for the first nonzero eigenvalue of the Laplacian of \(g_0\) with negative scalar curvature in terms of the Yamabe metric in its conformal class. On the other hand, we prove that the first eigenvalue of some geometric operators on a compact Riemannian manifold is nondecreasing along the unnormalized Yamabe flow under suitable curvature assumption. Similar results are obtained for manifolds with boundary and for CR manifold.     

Surgery and equivariant Yamabe invariant

We consider the equivariant Yamabe problem, i.e., the Yamabe problem on the space of G-invariant metrics for a compact Lie group G. The G-Yamabe invariant is analogously defined as the supremum of the constant scalar curvatures of unit volume G-invariant metrics minimizing the total scalar curvature functional in their G-invariant conformal subclasses. We prove a formula about how the G-Yamabe invariant changes under the surgery of codimension 3 or more, and compute some G-Yamabe invariants.     

Q‐Curvature on a Class of Manifolds with Dimension at Least 5

For a smooth compact Riemannian manifold with positive Yamabe invariant, positive Q‐curvature, and dimension at least 5, we prove the existence of a conformal metric with constant Q‐curvature. Our approach is based on the study of an extremal problem for a new functional involving the Paneitz operator.© 2016 Wiley Periodicals, Inc.     

Manifolds of positive scalar curvature and conformal cobordism theory

For a supergoup , we study closed -manifolds with positive conformal classes. We use the relative Yamabe invariant from [2] to define the conformal cobordism relation on the category of such manifolds. We prove that the corresponding conformal cobordism groups are isomorphic to the cobordism groups defined by Stolz in [19]. As a corollary, we show that the conformal concordance relation on positive conformal classes coincides with the standard concordance relation on positive scalar curvature metrics. Our main technical tools come from analysis and conformal geometry. Received: 22 August 2000 / Published online: 5 September 2002     

On the geometry of generalized Gaussian distributions

In this paper we consider the space of those probability distributions which maximize the q-Rényi entropy. These distributions have the same parameter space for every q, and in the q=1 case these are the normal distributions. Some methods to endow this parameter space with a Riemannian metric is presented: the second derivative of the q-Rényi entropy, the Tsallis entropy, and the relative entropy give rise to a Riemannian metric, the Fisher information matrix is a natural Riemannian metric, and there are some geometrically motivated metrics which were studied by Siegel, Calvo and Oller, Lovri?, Min-Oo and Ruh. These metrics are different; therefore, our differential geometrical calculations are based on a new metric with parameters, which covers all the above-mentioned metrics for special values of the parameters, among others. We also compute the geometrical properties of this metric, the equation of the geodesic line with some special solutions, the Riemann and Ricci curvature tensors, and the scalar curvature. Using the correspondence between the volume of the geodesic ball and the scalar curvature we show how the parameter q modulates the statistical distinguishability of close points. We show that some frequently used metrics in quantum information geometry can be easily recovered from classical metrics.     

Higher order curvature flows on surfaces

We consider a sixth and an eighth order conformal flow on Riemannian surfaces, which arise as gradient flows for the Calabi energy with respect to a higher order metric. Motivated by a work of Struwe which unified the approach to the Hamilton-Ricci and Calabi flow, we extend the method to these higher order cases. Our results contain global existence and exponentially fast convergence to a constant scalar curvature metric.Uniform bounds on the conformal factor are obtained via the concentration-compactness result for conformal metrics. In the case of the sphere we use the idea of DeTurck's gauge flow to derive bounds up to conformal transformation.We prove exponential convergence by showing that the Calabi energy decreases exponentially fast. The problem of the non-trivial kernel in the evolution of the Calabi energy on the sphere is resolved by using Kazdan-Warner's identity. Mathematics subject classifications (2000) {Primary 53C44 Secondary 35K25}     

Scalar Curvature and Q-Curvature of Random Metrics

We define a family of probability measures on the set of Riemannian metrics lying in a fixed conformal class, induced by Gaussian probability measures on the (logarithms of) conformal factors. We control the smoothness of the resulting metric by adjusting the decay rate of the variance of the random Fourier coefficients of the conformal factor. On a compact surface, we evaluate the probability of the set of metrics with non-vanishing Gauss curvature, lying in a fixed conformal class. On higher-dimensional manifolds, we estimate the probability of the set of metrics with non-vanishing scalar curvature (or Q-curvature), lying in a fixed conformal class.     

On the negative case of the Singular Yamabe Problem

Let (M, g) be a compact Riemannian manifold of dimension n ≥3, and let Γ be a nonempty closed subset of M. The negative case of the Singular Yamabe Problem concerns the existence and behavior of a complete metric g on M∖Γ that has constant negative scalar curvature and is pointwise conformally related to the smooth metric g. Previous results have shown that when Γ is a smooth submanifold (with or without boundary) of dimension d, there exists such a metric if and only if . In this paper, we consider a more general class of closed sets and show the existence of a complete conformai metric ĝ with constant negative scalar curvature which depends on the dimension of the tangent cone to Γ at every point. Specifically, provided Γ admits a nice tangent cone at p, we show that when the dimension of the tangent cone to Γ at p is less than then there cannot exist a negative Singular Yamabe metric ĝ on M∖Γ.