Enhanced deconstruction and dissolution of lignocellulosic biomass in ionic liquid at high water content by lithium chloride

Fabricating an aqueous ionic liquid (IL) for deconstruction and dissolution of lignocellulose is attractive because addition of water could reduce the cost and viscosity of the solvent and improve the biomass processing, but the solvating power of the IL is usually depressed in the presence of water. In the present study, an aqueous IL consisting of 1-butyl-3-methylimidazolium chloride (BmimCl), water, and lithium chloride was fabricated for efficient deconstruction and dissolution of lignocellulose (bamboo). The dissolution of cell wall components (cellulose, lignin, and hemicelluloses) in the aqueous IL was investigated. The results indicated that the presence of water significantly reduced the solvating power of BmimCl; For example, 11.5 % water decreased the dissolution of bamboo in BmimCl from ~97 to ~53 %. Dissolution of cellulose and lignin was specifically depressed. However, addition of lithium chloride was able to improve the tolerance of BmimCl to water and enhance the deconstruction and dissolution of biomass in BmimCl with high water content. It was found that approximately 80 % bamboo could be dissolved in solvent consisting of 45 wt% BmimCl and 55 wt% LiCl·2H₂O (25 wt% overall water content in the solvent). In particular, lignin and hemicelluloses were selectively dissolved by 96 and 92 %, respectively. The undissolved residue was predominantly composed of cellulose (~86 %) with a small amount of lignin (<5 %). BmimCl-LiCl-H₂O is a promising and effective solvent system with low cost and viscosity for biomass processing.     

Ionic liquid extraction method for upgrading eucalyptus kraft pulp to high purity dissolving pulp

High purity cellulose from wood is an important raw material for many applications such as cellulosic fibers, films or the manufacture of various cellulose acetate products. Hitherto, multi-step refining processes are needed for an efficient hemicellulose removal, most of them suffering from severe cellulose losses. Recently, a novel method for producing high purity cellulose from bleached paper grade birch kraft pulp was presented. In this so called IONCELL process, hemicelluloses are extracted by an ionic liquid–water mixture and both fractions can be recovered without yield losses or polymer degradation. Herein, it is demonstrated that bleached Eucalyptus urograndis kraft pulp can be refined to high purity acetate grade pulp via the IONCELL process. The hemicellulose content could be reduced from initial 16.6 to 2.4 wt% while persevering the cellulose I crystal form by using an optimized 1-ethyl-3-methylimidazolium dimethylphosphate-water mixture as the extraction medium. The degree of polymerization was then reduced by a sulfuric acid treatment for subsequent acetylation of the pulp, resulting in a final hemicellulose content of 2.2 wt%. When pre-treating the pulp enzymatically with endoxylanase, the final hemicellulose content could be reduced even to 1.7 wt%. For comparison, the eucalyptus kraft pulp was also subjected to cold caustic extraction and the same subsequent acid treatment which led to 3.9 wt% of residual hemicelluloses. The performance in acetylation of all produced pulps was tested and compared to commercial acetate grade pulp. The endoxylanase-IONCELL-treated pulp showed superior properties. Thus, an ecologically and economically efficient alternative for the production of highest value cellulose pulp is presented.     

Isolation of cellulose fibers from kenaf using electron beam

Cellulose fibers were isolated from a kenaf bast fiber using a electron beam irradiation (EBI) treatment. The methods of isolation were based on a hot water treatment after EBI and two-step bleaching processes. FT-IR spectroscopy demonstrated that the content of lignin and hemicellulose in the bleached cellulose fibers treated with various EBI doses decreased with increasing doses of EBI. Specifically, the lignin in the bleached cellulose fibers treated at 300 kGy, was almost completely removed. Moreover, XRD analyses showed that the bleached cellulose fibers treated at 300 kGy presented the highest crystallinity of all the samples treated with EBI. Finally, the morphology of the bleached fiber was characterized by SEM imagery, and the studies showed that the separated degree of bleached cellulose fibers treated with various EBI doses increased with an increase of EBI dose, and the bleached cellulose fibers obtained by EBI treatment at 300 kGy was separated more uniformly than the bleached cellulose fiber obtained by alkali cooking with non-irradiated kenaf fiber.     

Degradation of prednisone in aqueous solutions by electron beam irradiation

A novel degradation study of prednisone (PRE) in aqueous systems (10 mg L^?1) was performed under electron beam irradiation (EBI) in various conditions. The data demonstrate that the highest degradation caused by EBI was obtained with the oxidation of hydroxyl radicals. The proper amount of hydrogen peroxide could increase the PRE total carbon content removal rate. Nine degradation products of PRE in aqueous solution were preliminarily analyzed using ultra-high performance liquid chromatography in combination with mass spectrometry. Furthermore, the chemical analysis and possible degradation pathway were proposed with the assistance of theoretical calculation results by density functional theory.     

Gamma radiolytic degradation of the endrin insecticide in methanol and monitoring of radiolytic degradation products by HPLC

The objective of this investigation was to verify the degradation of endrin by gamma irradiation. ⁶⁰Co was used as radiation source for irradiation of 50 mg L^?1 endrin with a varied dose of 1–6 kGy. High performance liquid chromatography (HPLC) coupled with diode array detector was used as an analytical technique to monitor the degradation rate along with numbers of degradation products formed. At dose rate of 6 kGy ≥99% of endrin was degraded. It is proposed that utilization of ionization radiations can be an effective and efficient tool for the removal of halogenated pesticides.     

Isolation and characterization of cellulose nanofibers from four plant cellulose fibers using a chemical-ultrasonic process

Cellulose nanofibers (CNFs) were isolated from four kinds of plant cellulose fibers by a chemical-ultrasonic treatment. The chemical composition, morphology, crystalline behavior, and thermal properties of the nanofibers and their intermediate products were characterized and compared. The CNFs extracted from wood, bamboo, and wheat straw fibers had uniform diameters of 10–40 nm, whereas the flax fibers were not uniformly nanofibrillated because of their initially high cellulose content. The chemical composition of each kind of nanofibers was mainly cellulose because hemicelluloses and lignin were significantly removed during chemical process. The crystallinity of the nanofibers increased as the chemical treatments were applied. The degradation temperature of each kind of nanofiber reached beyond 330 °C. Based on the properties of the CNFs, we expect that they will be suitable for use in green nanocomposites, filtration media and optically transparent films.     

Thermogravimetric and calorimetric study of cellulose paper at low doses of gamma irradiation

The study of the behaviour of cellulose materials at low doses of ionizing radiation regained the interest because of the recent results showing that physical properties of the paper have less or no changes for absorbed doses below 10 kGy, despite the high decrease of the degree of polymerization. The understanding of the relationship among molecular, microscopic and macroscopic changes in cellulose materials may change the current opinion that irradiation of paper is not the best choice for conservation of cultural heritage. The aim of this study is to reveal the changes in gamma-irradiated pure cellulose paper by simultaneous TG/DSC analysis. For cellulose fibres, the thermal decomposition parameters depend on the cellulose degree of polymerization. For high irradiation doses, there is established a relationship between the absorbed dose and the degree of polymerization. However, a direct relationship between absorbed dose and the parameters of cellulose thermal decomposition for low irradiation doses was not established either in the literature or in our study. By using a peak separation technique, we studied the changes in the region of water loss (70–150 °C) and physical ageing (160–300 °C) for Whatman paper with low initial water content (<1 %), previously gamma irradiated at doses between 0 and 30 kGy. We concluded that strength of the hydrogen bond structure is increasing up to a point when the stress produces fractures in the fibrilar structure. This may explain the results reported for mechanical tests at low dose irradiation and it is in agreement with scanning electron microscopy pictures showing changes in fibril structure at high irradiation doses. Cellulose irradiated at low doses maintains its original hydrogen bond structure despite the decrease of the degree of polymerization.     

Enhanced removal of hemicelluloses from cellulosic fibers by poly(ethylene glycol) during alkali treatment

Enhancing removal of hemicelluloses from cellulosic fibers is of decisive importance for producing high-purity cellulose. In this study, poly(ethylene glycol) (PEG) was added to a cold caustic extraction (CCE) process to promote removal of hemicelluloses from a softwood sulfite dissolving pulp. The content of hemicelluloses was considerably decreased from 11.4 % in the original sample to 5.3 % in the PEG/CCE-treated sample under the studied conditions. This positive result of PEG addition can be explained by (1) improved inward penetration and diffusion of NaOH into the fiber structure and outward diffusion of hemicelluloses from the fiber structure to the bulk phase, and (2) enhanced fiber swelling due to inclusion of PEG in the fiber walls and improved NaOH diffusion. Moreover, the effects of PEG/CCE treatment on the distribution of hemicelluloses in the fiber walls and the molecular weight of the residual hemicelluloses in the resulting pulp were investigated.     

Atmospheric Pressure Plasma Pretreatment of Sugarcane Bagasse: The Influence of Moisture in the Ozonation Process

Sugarcane bagasse samples were pretreated with ozone via atmospheric O₂ pressure plasma. A delignification efficiency of approximately 80 % was observed within 6 h of treatment. Some hemicelluloses were removed, and the cellulose was not affected by ozonolysis. The quantity of moisture in the bagasse had a large influence on delignification and saccharification after ozonation pretreatment of the bagasse, where 50 % moisture content was found to be best for delignification (65 % of the cellulose was converted into glucose). Optical absorption spectroscopy was applied to determine ozone concentrations in real time. The ozone consumption as a function of the delignification process revealed two main reaction phases, as the ozone molecules cleave the strong carbon–carbon bonds of aromatic rings more slowly than the weak carbon–carbon bonds of aliphatic chains.     

Steam pretreatment of douglas-fir wood chips

Douglas-fir sapwood and heartwood were impregnated with SO₂ and steam exploded at three severity levels, and the cellulose-rich, water-insoluble component was enzymatically hydrolyzed. The high-severity conditions resulted in near complete solubilization and some degradation of hemicelluloses and a significant improvement in the efficiency of enzymatic digestibility of the cell ulose component. At lower severity, some of the hemicellulose remained un hydrolyzed, and the cellulose present in the pretreated solids was not readily hydrolyzed. The medium-severity pretreatment conditions proved to be a good compromise because they improved the enzymatic hydrolyzability of the solids and resulted in the recovery of the majority of hemicellulose in a monomeric form within the water-soluble stream. Sapwood-derived wood chips exhibited a higher susceptibility to both pretreatment and hydrolysis and, on steam explosion, formed smaller particles as compared to heartwood-derived wood chips.

     

Efficient hydrolyzation of cellulose in ionic liquid by novel sulfonated biomass-based catalysts

A green and effective approach for comprehensive hydrolyzation of cellulose has been described. Several carbon-based solid acids were successfully prepared using various biomass (glucose, microcrystalline cellulose, bamboo, and rice husk) and used to catalyze cellulose hydrolysis. The acid groups (–SO₃H and –COOH) were successfully introduced onto the surface of the carbon-based solid acid catalysts as evidenced by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. The structure of the prepared catalysts was characterized by scanning electron microscope and X-ray diffraction. The catalysts showed excellent catalytic performance for hydrolysis of cellulose. To improve the reaction efficiency, ball-milling and solubilization in ionic liquids of cellulose were adopted. A maximum total reducing sugar yield of 81.8 % was obtained in ionic liquid 1-butyl-3-methyl imidazolium chloride at 125 °C for 90 min when the water addition was 10 % of ionic liquid. This study provided a promising strategy to synthesize solid acids from lignocelluloses, which were further used to convert biomass into biofuels and platform chemicals.     

Phytosterols Elevation in Bamboo Shoot Residue through Laboratorial Scale Solid-State Fermentation Using Isolated Aspergillus niger CTBU

Aspergillus niger CTBU isolated from local decayed bamboo shoot residue was employed to solid-state fermentation (SSF) of bamboo shoot residue to elevate the content of phytosterols. Strain acclimatization was carried out under the fermentation condition using bamboo shoot as substrate for fermentation performance improvement. The optimal fermentation temperature and nitrogen level were investigated using acclimatized strain, and SSF was carried out in a 500-ml Erlenmeyer flask feeding 300-mg bamboo shoot residue chips under the optimal condition (33 °C and feeding 4 % urea), and 1,186 mg (100 g)^?1 of total phytosterol was attained after 5-day fermentation, in comparison, only 523 mg (100 g)^?1 of phytosterol was assayed in fresh shoots residue. HPLC analysis of the main composition of total phytosterols displays that the types of phytosterols and composition ratio of main sterols keep steady. This laboratorial scale SSF unit could be scaled up for raw phytosterols production from discarded bamboo shoot residue and could reduce its cost.     

Application of Pigeon Pea (Cajanus cajan) Stalks as Raw Material for Xylooligosaccharides Production

Pigeon pea (Cajanus cajan) is a perennial plant widely cultivated in tropical and subtropical regions of many countries. The present studies aimed to produce xylooligosaccharides (XOS) from pigeon pea stalks in order to do value addition. The chemical analysis of stalks revealed 18.33?±?1.40 % hemicelluloses in addition to cellulose, protein, and lignin. Sodium hydroxide coupled with steam application enabled almost 96 % recovery of original xylan, present in the pigeon pea stalks. Enzymatic hydrolysis of xylan led to production of XOS namely, xylobiose and xylotriose. Response surface model indicated a maximum yield of xylobiose (0.502 mg/ml) under the hydrolysis conditions of pH 4.91, temperature at 48.11 °C, enzyme dose at 11.01 U, and incubation time at 15.65 h. The ideal conditions for higher xylotriose yield (0.204 mg/ml) were pH 5.44, temperature at 39.29 °C, enzyme dose at 3.23 U, and incubation time at 15.26 h. The present investigation was successful in assessing the prospect of using pigeon pea stalks as a raw material for xylan extraction vis-à-vis XOS production.     

SEC-MALLS analysis of TEMPO-oxidized celluloses using methylation of carboxyl groups

Two cellouronic acids [sodium (1 → 4)-β-polyglucuronates, CUAs] and one 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-oxidized wood cellulose (TOC) became soluble in 8 % lithium chloride/N,N-dimethylacetamide (LiCl/DMAc) after the methylation of C6 carboxyl groups in these samples using trimethylsilyldiazomethane (TMSD). The obtained solutions were diluted to 1 % LiCl/DMAc and subjected to size-exclusion chromatography combined with multi-angle laser-light scattering (SEC-MALLS). Neither depolymerization nor side reactions took place during methylation; this was confirmed by SEC-MALLS and nuclear magnetic resonance analyses, using CUAs as models. The SEC-MALLS analysis of the original wood cellulose and the carboxyl-methylated TOC prepared from it, using 1 % LiCl/N,N-dimethyl-2-imidazolidinone and 1 % LiCl/DMAc, respectively, as eluents, showed that the weight-average degree of polymerization of the original wood cellulose decreased from 3,100 to 2,210 through TEMPO-mediated oxidation. The molecular-mass distributions of the original wood cellulose and the TOC both consisted of one large peak with a small shoulder, indicating that some of the oxidized hemicelluloses remained in the TOC. The combination of methylation of carboxyl groups in polysaccharides using TMSD and subsequent SEC-MALLS analysis using 1 % LiCl/DMAc as an eluent may be applicable not only to TOCs, but also to other polysaccharides with carboxyl groups, for evaluation of their molecular-mass parameters.     

The effect of chemical and physical characteristics of spruce SEW pulps on enzymatic hydrolysis

Conifers, which are the most abundant biomass species in Nordic countries, USA, Canada and Russia, exhibit strong resistance towards depolymerization by cellulolytic enzymes. At present, it is still not possible to isolate a single structural feature which would govern the rate and degree of enzymatic hydrolysis. On the other hand, the forest residues alone represent an important potential for biochemical production of biofuels. In this study, the effect of substrate properties on the enzymatic hydrolysis of softwood was studied. Stem wood spruce chips were fractionated by SO₂–ethanol–water (SEW) treatment to produce pulps of varying composition by applying different operating conditions. The SEW technology efficiently fractionates different types of lignocellulosic biomass by rapidly dissolving hemicelluloses and lignin. Cellulose remains fully in the solid residue which is then treated by enzymes to release glucose. The differences in enzymatic digestibility of the spruce SEW pulp fibers were interpreted in terms of their chemical and physical characteristics. A strong correlation between the residual lignin content of SEW pulp and enzymatic digestibility was observed whereas cellulose degree of polymerization and hemicellulose content of pulp were not as important. For the pulps containing about 1.5 % (w/w) lignin, 90 % enzymatic digestibility was achieved at 10 FPU enzyme charge and 24 h of hydrolysis time.     

Gamma-irradiation of cellulose nanocrystals (CNCs): investigation of physicochemical and antioxidant properties

Gamma irradiation is a common process mostly used for sterilization against bacteria growth. However, when the process is applied to a material, physical and chemical changes may alter its integrity and behaviour. The aim of this study was to observe the effect of γ-irradiation on the surface chemistry of CNCs. The carbonyl content (both carboxylic acid and aldehyde functionalities) was followed to investigate the influence of the irradiation dose. Thermal stability, wettability and antioxidant properties were also measured. Conductometric titration showed that the carboxylic acid groups content (COOH) was increased from 43 mmol COOH kg^?1 CNCs for native CNCs to 631 mmol COOH kg^?1 CNCs when a dose of 80 kGy was applied. These changes were confirmed by FTIR and fluorescence spectroscopy. At high irradiation doses, a significant decrease of approximately 30% was observed in the cellulose degree of polymerization while the aldehyde groups content was increased to 379 mmol CHO kg^?1 CNCs due to the cleavage of glycosidic linkages. These physicochemical changes led to enhanced antioxidant properties of CNCs.     

Mesoporous structures in never-dried softwood cellulose fibers investigated by nitrogen adsorption

Nitrogen adsorption was used to characterize mesoporous structures in never-dried softwood cellulose fibers. Distinct inflections in desorption isotherms were observed over the relative vapor pressure (P/P₀) range of 0.5–0.42 for never-dried cellulose fibers and partially delignified softwood powders. The reduction in N₂ adsorption volume was attributed to cavitation of condensed N₂ present in mesopores formed via lignin removal from wood cell walls during delignification. The specific surface areas of significantly delignified softwood powders were ~150 m² g^?1, indicating that in wood cell walls 16 individual cellulose microfibrils, each 3–4 nm in width, form one cellulose fibril bundle surrounded with a thin layer of lignin and hemicelluloses. Analysis of N₂ adsorption isotherms indicates that mesopores in the softwood cellulose fibers and partially delignified softwood powders had peaks ranging from 4 to 20 nm in diameter.     

Sulfur-free dissolving pulps and their application for viscose and lyocell

In this study, the concept of multifunctional alkaline pulping has been approved to produce high-purity and high-yield dissolving pulps. The selective removal of hemicelluloses was achieved by either water autohydrolysis (PH) or alkaline extraction (E) both applied as pre-treatments prior to cooking. Alternatively, hemicelluloses were isolated after oxygen delignification in a process step denoted as cold caustic extraction (CCE). Eucalyptus globulus wood chips were used as the raw material for kraft and soda-AQ pulping. In all process modifications sulfur was successfully replaced by anthraquinone. By these modifications purified dissolving pulps were subjected to TCF bleaching and comprehensive viscose and lyocell application tests. All pulps met the specifications for dissolving pulps. Further more, CCE-pulps showed a significantly higher yield after final bleaching. Morphological changes such as ultrastructure of the preserved outer cell wall layers, specific surface area and lateral fibril aggregate dimension correlated with the reduced reactivity towards regular viscose processing. The residual xylan after alkali purification depicted a lower content of functional groups and a higher molecular weight and was obviously entrapped in the cellulose fibril aggregates which render the hemicelluloses more resistant to steeping in the standard viscose process. Simultaneously, the supramolecular structure of the cellulose is partly converted from cellulose I to cellulose II by the alkaline purification step which did not influence the pulps reactivity significantly. Nevertheless, these differences in pulp parameters did not affect the lyocell process due to the outstanding solubility of the pulps in NMMO. Laboratory spinning revealed good fiber strength for both, regular viscose and lyocell fibers. The high molecular weight xylan of the CCE-treated pulps even took part in fiber forming.     

Pyrolytic behaviour of different biomasses (angiosperms) (maize plants,straws, and wood) in low temperature pyrolysis

The thermal degradation of agricultural products and by-products (two kinds of maize plants, wheat, and barley straw) has been investigated by means of thermogravimetric/mass spectrometric analysis at heating rates from 1 to 10 °C/min. Large differences were found in the pyrolytic behaviour of the untreated samples, mainly caused by the high content of inorganics (ash content of about 4–6 wt%). These differences could be reduced by washing the samples with cold water. A kinetic model based on the formal kinetic parameters for the pyrolysis of the main components (hemicelluloses, lignin, and cellulose) and their degradable amounts was applied. To reduce the complexity of the model, only largely ash reduced samples were used. The formal kinetic parameters for the main components of barley straw and Gavott were individually determined. Although, different monomeric lignin degradation products were found for the angiosperms of grassy biomass in comparison to woody biomass, the formal kinetic parameters for lignin degradation are similar. The transferability of the formal kinetic parameters was successfully tested by applying them to a different straw type (wheat) and to a different maize cultivar (Doge) using the results of the biochemical analysis for the main components (hemicelluloses, lignin, and cellulose).     

Cellulose nano-particles from Pandanus: viscometric and crystallographic studies

Pandanus utilis a plant abundant throughout Kerala, India has been used as a source to isolate nano-particles. The fibres were extracted from Pandanus plant by biological natural retting. Extracted fibres were dried, ground and treated with 5 % NaOH followed by bleaching using 5 wt % hypochlorite solution. Bleached cellulose was hydrolysed using sulphuric acid. After centrifugation, suspension was freeze dried. Effect of Acid concentration, temperature and time of hydrolysis on the isolation of cellulose nanoparticles was studied. FESEM images of cellulose showed the presence of spherical nano-particles. Dynamic light scattering revealed homogeneous dispersion of nano-particles. Degree of polymerisation of cellulose was determined viscometrically using cupriethylene-diamine as solvent. Removal of lignin and hemicelluloses was confirmed from FTIR spectra. X-Ray diffractograms of powdered fibre, bleached cellulose and nano-cellulose were compared. Using peak height method and peak de-convolution method, crystallinity indices were determined. Using Scherrer equation crystallite size was calculated and it further confirmed that particles are of nanometre size.