Polyaniline-coated cellulose fibers decorated with silver nanoparticles

Cellulose fibers of 20 μm in diameter and aspect ratio of 2 or 10 were coated with protonated polyaniline (PANI) during the oxidation of aniline hydrochloride with ammonium peroxydisulfate in an aqueous medium. The presence of PANI has been proved by FTIR spectroscopy. The conductivity increased from 4.0 × 10⁻¹⁴ S cm⁻¹ to 0.41 S cm⁻¹ after coating the fibers with PANI. The percolation threshold in the mixture of original uncoated and PANI-coated fibers was reduced from 10 mass % PANI to 6 mass % PANI, as the aspect ratio changed from 2 to 10. The subsequent reaction with silver nitrate results in the decoration of PANI-coated cellulose fibers with silver nanoparticles of about 50 nm average size. The content of silver of up to 10.6 mass % was determined as a residue in thermogravimetric analysis. FTIR spectra suggest that the protonated emeraldine coating changed to the pernigraniline form during the latter process and, consequently, the conductivity of the composite was reduced to 4.1 × 10⁻⁴ S cm⁻¹, despite the presence of silver.     

Cellulose matrix as a nanoreactor for preparing nanoparticles of nickel and its oxides using hydrazine dihydrochloride as reductant

A matrix of microcrystalline cellulose was used as a nanoreactor for the reduction of Ni(II) ions with hydrazine dihydrochloride.     

Porous and nonporous Ag nanostructures fabricated using cellulose fiber as a template

Porous and nonporous metallic Ag nanostructures were fabricated with ease by using cellulose fiber as a template.     

Luminescent cellulose fibers activated by Eu3+-doped nanoparticles

UV- active cellulose fibers were obtained by dry-wet method spinning an 8?% by weight α-cellulose solution in N-methylomorpholine-N-oxide (NMMO) modified by europium-doped gadolinium oxyfluoride Gd₄O₃F₆:Eu³⁺ containing 5?mol (%) of the dopant. Photoluminescent nanoparticles were introduced in the in powder form into a polymer matrix during the process of cellulose dissolution in NMMO. The dependencies of emission intensity on excitation energy and the concentration of Gd₄O₃F₆:Eu³⁺ nanoparticles in the final cellulosic products were examined by photoluminescence spectroscopy (excitation and emission). The fiber structure was studied by X-ray powder diffraction analysis. The size and dispersity of the nanoparticles in the polymer matrix were evaluated using scanning electron microscopy and X-ray microanalysis. The influence of different concentration particles (in the range from 0.5 to 5?% by weight) on the mechanical properties of the fibers, such as tenacity and elongation at break, were determined.     

Facile synthesis of high-concentration, stable aqueous dispersions of uniform silver nanoparticles using aniline as a reductant

A facile method was developed for preparing uniform silver nanoparticles with small particle sizes of less than 10 nm at high concentrations, in which aniline was used to reduce silver nitrate (AgNO(3)) to silver nanoparticles in the presence of dodecylbenzenesulfonic acid (DBSA) as a stabilizer. Upon the addition of excess NaOH to the DBSA-aniline-AgNO(3) (DAA) system, the formation of silver nanoparticles was almost complete in just 2 min at 90 °C (in 94% yield). The average size of those resultant silver nanoparticles was 8.9 ± 1.1 nm, and the colloids were stable for more than 1 year at ambient temperature. A possible mechanism for the formation of silver nanoparticles was proposed to be related to two factors: one was the mesoscopic structures of the DAA system in which silver ions were restricted in the dispersed phases composed of DBSA and aniline; the other was Ag(2)O nanocrystallites generated in situ that could be readily reduced by aniline to small silver nanoparticles at high concentrations.     

Polypropylene fibers modified by plasma treatment for preparation of Ag nanoparticles

A novel method for preparing poly(propylene-graft-2-methacrylic acid 3-(bis-carboxymethylamino)-2-hydroxy-propyl ester)-silver fibers (PPG-IAg fibers) by plasma-induced grafting polymerization is presented in this study. The chelating groups, -N(CH2COO-)2 (GMA-IDA), on the surface of the PPG-I fibers are the coordination sites for chelating silver ions. At these sites, Ag nanoparticles were grown first by reduction with UV light with a wavelength of 366 nm, and second, through immersion in a 24% formaldehyde solution with pH values set variously at 2, 5, 8, and 11. The characteristics of the PPG-I fibers with differing durations of plasma treatment were monitored by using a Fourier transform infrared (FT-IR) spectroscope. Scanning electronic microscopy (SEM) and elemental analysis show that the percentage of GMA-IDA grafted onto PP fiber reaches a maximum when the plasma treatment time is 3 min. Plasma treatment time beyond a certain length of time results in an abundance of free radicals and causes considerable cross-linking on the fiber surface which thus decreases the extent of grafting. Moreover, the crystalline phase of Ag nanoparticles is identified by using X-ray diffraction (XRD). When the PPG-I fibers are reduced by the UV light method, SEM and TEM microscopes reveal that the size of the Ag nanoparticles on the fiber surface decreases significantly with the increase of pH values in aqueous solutions. Notably, in the reduction of formaldehyde solution, the particle size of Ag nanoparticles reaches a minimum at the lowest pH value. The TEM observations show that Ag nanoparticles are distributed both in the exterior and interior of the grafting layer. In addition, under high pH values the distribution of the Ag nanoparticles permeate more deeply in the GMA-IDA grafting layer due to the swelling effect of the GMA-IDA polymer.     

Electrostatic assembly of Ag nanoparticles onto nanofibrillated cellulose for antibacterial paper products

Nanofibrillated cellulose offers new technological solutions for the development of paper products. Here, composites of nanofibrillated cellulose (NFC) and Ag nanoparticles (NP) were prepared for the first time via the electrostatic assembly of Ag NP (aqueous colloids) onto NFC. Distinct polyelectrolytes have been investigated as macromolecular linkers in order to evaluate their effects on the building-up of Ag modified NFC and also on the final properties of the NFC/Ag composite materials. The NFC/Ag nanocomposites were first investigated for their antibacterial properties towards S. aureus and K. pneumoniae microorganisms as compared to NFC modified by polyelectrolytes linkers without Ag. Subsequently, the antibacterial NFC/Ag nanocomposites were used as fillers in starch based coating formulations for Eucalyptus globulus-based paper sheets. The potential of this approach to produce antimicrobial paper products will be discussed on the basis of complementary optical, air barrier and mechanical data.     

Characterization of cellulose fibers electrospun using ionic liquid

Nonwoven fibers of cellulose were obtained by electrospinning of cellulose in an ionic liquid, 1-butyl-3-methylinmidazolium chloride (BMIMCl), which is known to be one of the non-volatile solvents. The electrospinning setup was modified in such a way that the syringe was contained in a constant-temperature chamber because of the high melting point of BMIMCl, and the electrospun fibers were collected on the water, which immediately removed the remnant solvent from the electrospun cellulose fibers. The effect of the viscosity of the cellulose solution in BMIMCl on the size and the structure of the fibers was investigated. The crystalline structure of cellulose was examined by X-ray diffraction. Also, the effect of dimethyl sulfoxide, which was expected to induce swelling of cellulose, was studied. The minimum diameter of the continuous electrospun cellulose fibers obtained in this work ranged between 500 and 800 nm.     

Co-sensitized cells from Antarctic resources using Ag nanoparticles

In the present work, we explore in photoanodes of dye-sensitized solar cell (DSSC) the co-sensitization of the red protein phycoerythrin extracted from Antarctic algae with spherical silver nanoparticles between 10 and 200 nm and triangular nanoparticles of ~100 nm. We found that the order of addition of the sensitizers matters. Best results achieved for a sequential approach was phycoerythrin used as a dipping solution at the first step and nanoparticles at the second. We found that cell efficiency depends on the protein concentration, although no main differences detected with the nanoparticle shape or size. Our results show an average increase of 25% in the conversion efficiency values in the presence of nanoparticles.     

Isolation of cellulose fibers from kenaf using electron beam

Cellulose fibers were isolated from a kenaf bast fiber using a electron beam irradiation (EBI) treatment. The methods of isolation were based on a hot water treatment after EBI and two-step bleaching processes. FT-IR spectroscopy demonstrated that the content of lignin and hemicellulose in the bleached cellulose fibers treated with various EBI doses decreased with increasing doses of EBI. Specifically, the lignin in the bleached cellulose fibers treated at 300 kGy, was almost completely removed. Moreover, XRD analyses showed that the bleached cellulose fibers treated at 300 kGy presented the highest crystallinity of all the samples treated with EBI. Finally, the morphology of the bleached fiber was characterized by SEM imagery, and the studies showed that the separated degree of bleached cellulose fibers treated with various EBI doses increased with an increase of EBI dose, and the bleached cellulose fibers obtained by EBI treatment at 300 kGy was separated more uniformly than the bleached cellulose fiber obtained by alkali cooking with non-irradiated kenaf fiber.     

Rhenium-catalyzed deoxydehydration of renewable biomass using sacrificial alcohol as reductant

Catalytic deoxydehydration (DODH) of vicinal diols is studied. We find that NH₄ReO₄ (ammonium perrhenate, APR) catalyzes the DODH of glycols to alkenes by sacrificial alcohol (2,4-dimethyl-3-pentanol) at 140–165 °C. The product yields range from good to excellent and no isomers detected. The catalytic DODH reaction of glycols to alkene is of potential value for the production of chemicals and fuels from the renewable biomass-derived polyols.

1. Download high-res image (24KB)
2. Download full-size image

     

金属锌在有机合成反应中的应用

综述了近年来以金属锌作为还原剂的各种反应，以及它在有机合成中的应用。 讨论了金属锌在催化剂的作用下，还原碳碳、碳氮、碳氧重键及碳氧、碳硫、碳卤 等单键的还原和偶联。     

Diastereoselective cobalt-catalyzed reductive aldol cyclizations using diethylzinc as the stoichiometric reductant

[reaction: see text] Cobalt catalysis enables a new method for the generation of zinc enolates using diethylzinc to reduce alpha,beta-unsaturated amides. This method has been applied to a high-yielding diastereoselective reductive aldol cyclization.     

Aqueous synthesis of alkanethiolate-protected Ag nanoparticles using Bunte salts

The one-pot synthesis of monolayer-protected metal nanoparticles derived from sodium S-dodecylthiosulfate (Bunte salt) in aqueous solution is described. Silver nanoparticles, which were produced by the borohydride reduction of silver nitrate in H2O, were stabilized by the adsorption of S-dodecylthiosulfate followed by the removal of the SO3- moiety. Temporary stabilization of silver sols by the adsorption of borohydride and borate prevented aggregation of silver nanoparticles in H2O. The syntheses of other metal nanoparticles, including gold, copper, and palladium particles in H2O, were less successful. Gold and copper particles were completely aggregated and precipitated out immediately after the addition of NaBH4, yielding only insoluble clusters. Stable and soluble palladium nanoparticle could be prepared, but the presence of Pd-thiolate complex was also observed. These nanoparticles were characterized using 1H NMR, UV-vis spectroscopy, FT-IR spectroscopy, and transmission electron microscopy.     

Synthesis of silver nanoparticles in NMMO and their in situ doping into cellulose fibers

We present a method for synthesis of silver nanoparticles in N-methylmorpholine N-oxide (NMMO) and the associated mechanism, as well as their use for in situ volume modification of cellulose fibers. The synthesized particles had diameter of about 4 nm, and their colloid solution was stable for 1 year. The nanoparticles were stabilized using polyethylenimine, which apart from preventing nanoparticle agglomeration, also accelerated Ag⁺ ion reduction and prevented NMMO degradation. A mechanism for the nanoparticle synthesis is suggested based on the electrochemical potentials of all ions in solution, with perhydroxyl ions resulting from NMMO reducing the silver ions. We also created nanocomposites from fibers and silver nanoparticles, in which the latter showed very good dispersion in the fiber volume. Such spun fibers showed improved mechanical parameters in comparison with unmodified fibers.     

Isolation and characterization of cellulose nanofibers from four plant cellulose fibers using a chemical-ultrasonic process

Cellulose nanofibers (CNFs) were isolated from four kinds of plant cellulose fibers by a chemical-ultrasonic treatment. The chemical composition, morphology, crystalline behavior, and thermal properties of the nanofibers and their intermediate products were characterized and compared. The CNFs extracted from wood, bamboo, and wheat straw fibers had uniform diameters of 10–40 nm, whereas the flax fibers were not uniformly nanofibrillated because of their initially high cellulose content. The chemical composition of each kind of nanofibers was mainly cellulose because hemicelluloses and lignin were significantly removed during chemical process. The crystallinity of the nanofibers increased as the chemical treatments were applied. The degradation temperature of each kind of nanofiber reached beyond 330 °C. Based on the properties of the CNFs, we expect that they will be suitable for use in green nanocomposites, filtration media and optically transparent films.     

Textile grade long natural cellulose fibers from bark of cotton stalks using steam explosion as a pretreatment

Textile grade long natural cellulose fibers with fineness of 27 dtex have been extracted from bark of cotton stalks by a combination of steam explosion, potassium hydroxide and peroxide treatments (explosion–KOH–H₂O₂). It was reported that natural cellulose fibers from bark of cotton stalks had significantly better mechanical properties than those from other lignocellulosic agricultural byproducts such as rice and wheat straws. Fibers from bark of cotton stalks were used to reinforce thermoplastic composites but could not be spun into yarns for textile applications due to their high fineness value (around 50 dtex) and/or low aspect ratio (around 660). In this research, barks of cotton stalks were treated using three methods, including steam explosion, a combination of steam explosion and potassium hydroxide treatments (explosion–KOH) and explosion–KOH–H₂O₂. The morphology, composition, carding yield, crystalline structures and tensile properties of three different cotton stalk fibers were analyzed. Results showed that cotton stalk fibers extracted by explosion–KOH–H₂O₂ had the lowest fineness value of 27 dtex and moderate aspect ratio of 1,150 in three kinds of fibers. The fibers also had most clean and smooth surfaces, highest carding yield of 68.6 %, and highest cellulose content of 82.1 wt% due to effective removal of non-cellulose impurities. Moreover, the fibers had tensile properties close to cotton fibers. Overall, the cotton stalk fibers presented a better potential to be used as textile fibers than those reported by previous researches. explosion–KOH–H₂O₂ could be an efficient method for exploring textile applications of bark of cotton stalks.     

Decoration of Au and Ag nanoparticles on self-assembling pseudopeptide-based nanofiber by using a short peptide as capping agent for metal nanoparticles

The surface of a nanofiber that is formed from a self-assembling pseudopeptide has been decorated by gold and silver nanoparticles that are stabilized by a dipeptide. Transmission electron microscopic images make the decoration visible. In this paper, a new strategy of mineralizing a pseudopeptide based nanofiber by gold and silver nanoparticles with use of a two-component nanografting method is described.     

Supported Ag nanoparticles as trace iodide adsorbent from acetic acid

Ag nanoparticles (AgNPs) were used as adsorbent to remove trace iodide from acetic acid. Under identical conditions, AgNPs adsorbent with 0.5 wt % Ag has the same performance as commercial adsorbent with 10 wt % Ag⁺. In addition, Ag loss of AgNPs adsorbent is remarkably lower than that of commercial adsorbent. The Ag content in AgNPs adsorbent affects its adsorption performance, and the optimal content is 1.0 wt %. Saturated AgNPs adsorbent can be regenerated by hydrogen reduction and reused with satisfying performance. The properties of AgNPs adsorbent are based on surface effect of nanoparticles, differing from commercial Ag⁺ type adsorbents. In a word, AgNPs adsorbent is of high efficiency, low Ag loss and easy recycling, thus making it ??green adsorbent?? for removing iodide from acetic acid.