Decomposition behaviors of various crystalline celluloses as treated by semi-flow hot-compressed water

Various types of crystalline cellulose consisting of group I (cell I, III_I, IV_I) and group II (cell II, III_II, IV_II) prepared from cotton linter were adjusted for their degree of polymerization (DP) as starting materials. These celluloses were then treated by semi-flow hot-compressed water (HCW) at 230–270 °C/10 MPa/2–15 min to study their decomposition behaviors. The treatments performed resulted in residues of celluloses and water-soluble (WS) portions. Consequently, the crystallinity of the residues was found to remain the same, but the DP was reduced as the temperature increased. Additionally, X-ray diffractometry and Fourier transform-infrared analyses demonstrated that crystallographic changes occurred for residues of cell III_I, IV_I and III_II. Despite these changes, the overall results of the residues showed that group I has higher resistance to decomposing than group II. As for the WS portions, the yields of the hydrolyzed and degraded products were higher in group II than group I, indicating that group II is less resistant to decomposition by HCW treatment. Results for both the residues and WS portions are in agreement with each other, showing that the degree of difficulty of decomposition was higher in group I than group II. Therefore, the decomposition behaviors of the celluloses are due to differences in the crystalline forms.     

Cellulose polymorphism study with sum-frequency-generation (SFG) vibration spectroscopy: identification of exocyclic CH2OH conformation and chain orientation

Sum-frequency-generation (SFG) vibration spectroscopy is a technique only sensitive to functional groups arranged without centrosymmetry. For crystalline cellulose, SFG can detect the C6H₂ and intra-chain hydrogen-bonded OH groups in the crystal. The geometries of these groups are sensitive to the hydrogen bonding network that stabilizes each cellulose polymorph. Therefore, SFG can distinguish cellulose polymorphs (I_β, II, III_I and III_II) which have different conformations of the exocyclic hydroxymethylene group or directionalities of glucan chains. The C6H₂ asymmetric stretching peaks at 2,944 cm^?1 for cellulose I_β and 2,960 cm^?1 for cellulose II, III_I and III_II corresponds to the trans-gauche (tg) and gauche-trans (gt) conformation, respectively. The SFG intensity of the stretch peak of intra-chain hydrogen-bonded O–H group implies that the chain arrangement in cellulose crystal is parallel in I_β and III_I, and antiparallel in II and III_II.     

Study of substituent effects on rotational isomers and monomer–dimer equilibria of the 3-carboxy group in 4-substituted (R)-2-(3,4-methylenedioxyphenyl)-6-isopropyloxy-2H-chromen-3-carboxylic acids in dilute CCl4 and CHCl3 solutions by FTIR spectroscopy

FTIR spectra of the title carboxylic acids (I–III) with 4-substituents (H, CH₃ or C₆H₅) and their related compounds IV–VI with 4-(substituted phenyl) groups were measured in dilute CCl₄ and CHCl₃ solutions. The concentration dependence of FTIR spectra of I–IV was also measured in these solutions. These spectra were subjected to curve analysis in order to quantitatively identify the rotational isomers of 3-carboxy group attributable to steric hindrance of the 4-substituents. For I, II and III–VI, two, four and five ν(CO) bands were observed for their carboxy groups, respectively, indicative of monomer–dimer equilibrium and two and three kinds of rotational isomers for II and III–VI, respectively. Compounds III–VI were found to form intra-molecular hydrogen bonds between the trans-type of the 3-carboxy group and the π-electrons in the 4-benzene ring. We have worked out a method to estimate the association constant (K) of complicated monomer–dimer equilibria such as II–VI. The K values of I–IV decrease remarkably in the order of H (I), C₆H₅ (III), CH₃ (II) and C₆H₄-p-OCH₃ (IV) in CCl₄ and I, II, III and IV in CHCl₃; these orders are discussed.     

Elastic modulus of the crystalline regions of cellulose polymorphs

The elastic modulus E_l of the crystalline regions of cellulose polymorphs in the direction parallel to the chain axis was measured by x-ray diffraction. The E_l values of cellulose I, II, III_I, III_II, and IV_I were 138, 88, 87, 58, 75 GPa, respectively. This indicates that the skeletons of these polymorphs are completely different from each other in the mechanical point of view. The crystal transition induces a skeletal contraction accompanied by a change in intramolecular hydrogen bonds, which is considered to result in a drastic change in the E_l value of the cellulose polymorphs. © 1995 John Wiley & Sons, Inc.     

Molecular dynamics simulation of dissociation behavior of various crystalline celluloses treated with hot-compressed water

The dissociation behavior of the crystalline cellulose polymorphs I_β, II, III_I, and IV_I (Cell I_β, etc.) at 503 K and 100 bar was studied by molecular dynamics simulation, and the mechanism of the experimental liquefaction during treatment with hot-compressed water was elucidated. The results showed that the mini-crystals of Cell I_β and Cell IV_I exhibited similar resistance to dissociation, which implies the occurrence of crystal transformation from Cell IV_I to Cell I. On the other hand, the mini-crystal of Cell II gradually dissociated into the water environment with the progress of time in the simulation. The water molecules gradually penetrated the Cell II crystal, especially along the (1 \(\overline{1}\) 0) crystal plane. In contrast, the dissolution behavior differed for the surface and the core areas of the mini-crystal of Cell III_I. The cellulose chains on the surface were dissociated into the water environment, whereas the ordered structure of the chains in the core region was maintained for the entire simulation period. The detailed investigation showed that the core part of Cell III_I was transformed into Cell I at an early stage of the simulation: Cell I is resistant to dissociation of the structure even in the hot-compressed water environment. It can be confirmed that the stability of these four crystals under high temperature and pressure conditions follows the order: Cell II < III_I < IV_I ≈ I_β.     

Kinetics and possible mechanisms of alkaline hydrolysis of alkoxy-<Emphasis Type="Italic">NNO</Emphasis>-azoxy compounds

Hydrolysis rate of alkoxy-NNO-azoxy compounds like di(methoxy-NNO-azoxy)methane I, di-(methyl-NON-azoxy)formal II, di(methoxy-NNO-azoxy)methane III, and 2,2-di(methoxy-NNO-azoxy)propane IV in 5 M KOH solution was measured by manometric method at 80°C; rates relation is 1:40:540:10. Reversible deprotonation to form C-anions followed by their rapid decomposition is a presumable mechanism for compounds I–III. Nucleophilic attack of OH-anion on the carbon atom of CH₃ON=N(O) group is the most probable first stage of hydrolysis in the case of compound IV.     

Solvent extraction and spectrophotometric determination of uranium (VI)

Summary Solvent extraction of uranium-sodium diethyldithiocarbamate with ethylmethyl ketone and separation from titanium, zirconium, thorium, lanthanum and cerium has been described. It has been found that 11.75 to 47.00 mg of uranium can be extracted from a binary mixture containing 4.78 to 19.04 mg of titanium, 9.12 to 36.48 mg of zirconium, 116.0 to 460.0 mg of thorium, 6.95 to 27.8 mg of lanthanum or 7.06 to 28.24 mg of cerium at pH 3.0. The pH range between which the separations may be carried out successfully is 2.0 to 3.5. The following cations interfere in the separations: Cu^II, Fe^III, Co^II, Bi^III, Ni^II, Cr^VI, Te^IV, Se^IV, Ag^I, Hg^II, As^III, Sn^IV, Pb^IV, Cd^II, Mo^VI, Mn^II, V^V, Zn^II, In^III, Tl^I, W^VI, Os^VIII and Nb^V.

---

Zusammenfassung Uran kann durch Extraktion als Diäthyldithiocarbamidat mit Methyläthylketon von Ti, Zr, Th, La oder Ce getrennt werden. Der günstigste pH-Bereich liegt zwischen 2,0 und 3,5. Die Trennungen wurden mit folgenden Mengen durchgeführt: U (11,75–47,00 mg); Ti (4,78 bis 19,04 mg), Zr (9,12–36,48 mg) Th (116,0–460,0 mg), La (6,95–27,8 mg), Ce (7,06–28,24 mg). Folgende Ionen verursachen Störungen: Cu^II, Fe^III, Co^II, Bi^III, Ni^II, Cr^VI, Te^IV, Se^IV, Ag^I, Hg^II, As^III, Sn^IV, Pb^IV, Cd^II, Mo^VI, Mn^II, V^VI, Zn^II, In^III, Tl^I, W^VI, Os^VIII sowie Nb^V.

     

New carbofunctional organosilicon monomers and polymers possessing sorption and metal chromatic properties

Monomeric and polymeric β-naphthylamine and dithizone organosilicon derivatives were synthesized. The organosilicon polymers were studied as sorbents of heavy (Fe^III, Hg^II) and noble (Ag^I, Au^III, Rh^III, Pd^II, Pt^IV) metal ions, as well as of Ce^III and Tb^III. They were found to possess high sorption activity toward platinum group metals and iron. The monomers and polymers obtained exhibit metal chromatic properties. Their reactions virtually with all the elements studied, except cerium and terbium, are accompanied by coloration.     

Sorption properties of hydrogels of transition and p-metal oxide hydroxides

The experimental data on the sorption properties of hydrogels of Fe^III, Ti^IV, Zr^IV, Sn^IV, In^III, Cr^III, Sm^III, Co^II, and Zn^II oxide hydroxides are summarized. The data were obtained by the point of zero-charge method and by measurin the rates of the indicator reaction,viz., heterogeneous hydrolysis of the chloro complexes of platinum group metals. The compositions of the oxide hydroxides, the pH of the point of zero charge in various ionic media, and the rate constants of the indicator reactions were determined. The values obtained were analyzed in terms of their correlation with the charge, the radius, and the electronic struture of the central ion and with the composition and the preparation conditions of the oxide hydroxide. A data base that allows one to choose an appropriate oxide hydroxide sorbent for extraction of particular complex-forming metals from complexing media is presented. The data obtained confirm the model of the mechanism of heterogeneous hydrolysis and extend its predicting ability. The model was tested experimentally in relation to tin(IV) oxide hydroxide. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 2, pp. 228–238, February, 1999.     

Comparison of Carboxamides Reactivity with Respect to Benzoyl Chloride and Diphenyl Chlorophosphate in Acetonitrile

For amides belonging to series RCONH₂ (I), RCONHMe (II), RCONHPh (III), and RCONMe₂ (IV) rate constants k₁ (l mol^-1 s^-1) were determined (in acetonitrile at 25°C) specifying the nucleophilic reactivity of the oxygen atom in amides toward benzoyl chloride and diphenyl chlorophosphate. The lack of substrate selectivity in the reactions in question was established. For equal values of inductive constants ^* of the R substituents the reactivity sequence of amides with respect to both substrates is the same (I >> IV > II, and III > II), and it does not follow the corresponding sequence of basicities. A conclusion was drawn that both groups of reactions proceed through cyclic transition states resembling reagents: six-membered with amides I and III, and five-membered with amides II and IV.     

Hexafluorosilicates of bis(aminopyridinium). The relationship between H-bonding system and solubility of salts

Pyridinium hexafluorosilicates of the composition (LH)₂[SiF₆] (I, II, IV, L = 2-aminopyridine, 3-aminopyridine, and 2,6-diaminopyridine) and (LH)₂[SiF₆]·H₂O (III, L = 4-aminopyridine) were separated as crystalline products of interaction of fluorosilicic acid with relevant aminopyridines. The compounds were characterized by IR, mass-spectrometry, potentiometry, solubility data, and in the case of I and IV by X-ray crystallography. The relationship between the salts structure and some physical properties is discussed.     

Test Films for the Determination of Aromatic Amines and Hydrazines in Aqueous Solutions

Conditions of the test determination of toxic aniline (I), N,N-dimethylaniline (II), N,N-diethylaniline (III), 2,2,4-trimethyl-1,2-dihydroquinoline (IV), 1,1-dimethylhydrazine (V), and phenylhydrazine (VI) as their 4,6-dinitrobenzofuroxan (I) and 5,7-dinitrobenzofurazan (II, III, IV, V, VI) derivatives in aqueous solutions were found. Visual and spectrophotometric measurement of the signal was used. The reagents were immobilized in nitrocellulose films. Optimal results of visual determination of color development in test films were obtained with reagents immobilized in nitrocellulose at their concentration of 5 mass % and pH of the test solution in the range 6.0–7.5. The spectrophotometric measurement of the signal of test films was performed at wavelengths of 500–560 nm for I, V, and VI and 610–620 nm for II, III, and IV. The detection limit for spectrophotometric measurement was 0.01, 0.18, 0.13, 0.15, 0.16, and 0.04 mg/L for I, II, III, IV, V, and VI, respectively. The analytical range of the toxicants was 0.05–6.0 mg/L. Test determination is possible in the presence of alkylamines, ammonia, phenols, carboxylic acids, and inorganic salts.     

ESR.-Untersuchungen an Radikal-Anionen des 1, 6-Imino-[10]annulens und seines N-Methyl-Derivats

The ESR.-spectrum of the radical anion of 1,6-imino-[10]annulene (II) has been recorded. Its hyperfine structure reflects the reduced symmetry (C_s) of the molecule, as compared with that (C_2v) of 1,6-methano- and 1,6-oxido-[10]annulenes (I and III, resp.). The coupling constants of the ring protons in II^? are intermediate between the corresponding values of I^? and III^?. The ESR.-spectrum of the radical anion of 1,6-methylimino-[10]annulene (IV) has also been obtained, but not analysed in detail. The relative stabilities of the radical anions of the four bridged [10]annulenes are: I^??II^? > III^? > IV^?. The main secondary product identified by ESR.-spectroscopy after the decay of II^?, III^? and IV^? is the naphthalene radical anion. A remarkable exception is IV, when reduced with sodium in 1,2-dimethoxyethane: in this case the ESR.-spectrum of the azulene radical anion is observed.     

Radiation-Induced Polymerization and Pressure-Volume Behavior of Acrylonitrile at High Pressure

Radiation-induced polymerization and pressure-volume (P-V) measurements of acrylonitrile (AN) were studied up to 8000 kg/cm² in the temperature range of 6–72°C. P-V isotherms of AN have several small breaks, A phase diagram of AN was obtained from the breaking pressures and temperatures. Liquid phases were named L_I, L_II, and L_III, from low to high pressure. The polymerization behavior and volume contraction on polymerization changed in L_I, L_II, and L_III. The difference in entropy between original and activated states decreased with increasing pressure at the same phase, but increased with phase change in L_I to L_II and L_II to L_III. It was concluded from these results and from IR data on PAN that molecular packing of AN in liquid changed in L_I, L_II, and L_III. In L_II and L_III, AN molecules aligned in a less suitable geometry for polymerization than in L_I.     

New organosilicon derivatives of some analytical reagents: sorbents and metallochromic agents

A synthesis of organosilicon monomeric and polymeric derivatives of 1,4-phenylenediamine, 4-aminoantipyrine, and aniline, which are analytical agents possessing sorption properties, was accomplished. The synthesized organosilicon polymers were studied as sorbents of heavy metals Fe^III, Hg^II and noble metals Ag^I, Au^III, Rh^III, Pd^II, Pt^IV. Poly[(3-N-silsesquioxanylpropyl-4aminoantipyrine)] exhibited high sorption activity with respect to platinum group metals in comparison with poly[N,N´-bis(3-silsesquioxanylpropyl)-1,4-phenylenediamine]. The reaction of poly[(3-N-silsesquioxanylpropyl-4-aminoantipyrine)] practically with all the elements under study was accompanied by coloring. The starting monomer exhibited similar metallochromic properties.     

Action de CF3 of sur des aziridines N-non substitutees

Aziridines $\text{I}$ react with trifluoromethyl hypofluorite at ? 40°C to produce mixtures of 1-(aziridine)carbonyl fluoride $\text{II}$ and 1-fluoroaziridine $\text{III}$, the proportions of which depend on steric effects. Several compounds $\text{II}$ react with starting materials to give 1, 1′-(carbonyl)bisaziridines $\text{IV}$. Most compounds $\text{II}$ and all compounds $\text{IV}$ are isolated. Chemical properties and ir and nmr data of $\text{II}$, $\text{III}$, $\text{IV}$ are described; the formation of an isocyanate and a substituted urea from a compound $\text{II}$ is observed. A mechanism for this reaction is suggested.     

Silver‐Free Two‐Component Approach in Gold Catalysis: Activation of [LAuCl] Complexes with Derivatives of Copper,Zinc, Indium,Bismuth, and Other Lewis Acids

Complexes of type [LAuCl] (L=phosphine, phosphite, NHC and others) are widely employed in homogeneous catalysis, however, they are usually inactive as such and must be used jointly with a halide scavenger. To date, this role has mostly been entrusted to silver salts (AgSbF₆, AgPF₆, AgBF₄, AgOTf, etc.). However, silver salts can be the source of deactivation processes or side reactions, so it is sometimes advisable to use silver‐free cationic gold complexes, which can be difficult to synthesize and to handle compared with the more robust chloride. We show in this study that various Lewis acids of the transition and main group metal families are expedient substitutes to silver salts. We have tested Cu^I, Cu^II, Zn^II, In^III, Si^IV, Bi^III, and other salts in a variety of typical Au^I‐catalyzed transformations, and the results have revealed that [LAuCl] can form active species in their presence.     

Molecular structure of some [1.1 ]ferrocenylruthenocenophanium (n = 1,2 polyiodides salts

Oxidation of [1.1]ferrocenylruthenocenophane with a large excess and 1.5 equivalents of iodine gives dicationic iodo[1.1]ferrocenylruthenocenophanium²⁺I₃⁻ · 0.5I₂2 (1) and monocationic [1.1]ferrocenylruthenocenophanium⁺I₃⁻ (2) salts respectively. The structures of 1 and 2 were analyzed by single-crystal X-ray diffraction studies. The crystal form of 1 is monoclinic space group C2/c, A = 21.35](5), B = 20.594(5), C = 17.397(4) Å, β = 124.17(1)°, Z = 8, and the final R = 0.068 and R_w = 0.070. The cation formulated as [Fe^III(C₅H₄CH₂C₅H₄)₂Ru^IVI]²⁺ exists in a syn-conformation as in the cases of the neutral compound. The distance between the Ru^IV and Fe^II is 4.656(4) Å, which is much shorter than the value of the neutral compound (4.792(2) Å), and the bond angle of I---Ru^IV,Fe^III is 81.26°. The dihedral angle between the two η⁵-C₅H₄ (fulvenide) rings on the Ru^IV moiety is 37.56° due to the Ru^IV---I bond (2.758(3) Å). These two rings of Fe^III and Ru^IV moieties are essentially eclipsed. The unit cell has three kinds of I₃⁻ (I_3a⁻, I_3b⁻ and I_3c⁻) and one I₂, and the formula of 1 is given as [Fe^III(C₅H₄CH₂CSH₄)₂Ru^IVI]²⁺I₃⁻ · 0.5(I₃⁻)₂ · 0.5I₂. The crystal of 2 formulated as [Fe^III(C₅H₄CH₂C₅H₄)₂Ru^II]⁺I₃⁻ is triclinic space group

Full-size image

, and the final R = 0.067 and R_w = 0.068. The unit cell has two independent molecules (unit A and B); i.e. two kinds of distance between the Ru^II and Fe^III, are observed; one (A) is 4.615(3) and the other (B) is 4.647(3) α. The two η⁵-C₅H₄ rings of both Fe^III and Ru^II are essentially staggered and the dihedral angles between the rings of FcH and RcH moieties are less than 5.8°. Typical ferrocenium-type broad singlet ⁵⁷Fe-Mössbauer lines are observed for both salts (1, 2) at all temperatures.     

Cobalt(II) and copper(II) complexes with chiral pyrazolylquinoline,a derivative of terpenoid (+)-3-carene. Catalytic activity in ethylene polymerization reaction

Coordination compounds [CoLCl₂] (I), [CuLCl(NO₃)] (II), CuL(NO₃)₂ (III), and CuLCl₂ (IV) (where L is a chiral pyrazolylquinoline—a derivative of terpenoid (+)-3-carene) were synthesized. X-ray diffraction data showed that crystal structures I and II are built of mononuclear acentric molecules. In the molecule of complex I, the Co₂₊ ion coordinates two N atoms of bidentate cycle-forming ligand L and two Cl atoms. The coordination polyhedron of Cl₂N₂ is a distorted tetrahedron. For complex I, μ_eff = 4.50 μ_B, which corresponds to a high-spin configuration d ⁷. In the molecules of II(1), II(2) (which are diastereoisomers of complex II), each Cu²⁺ ion coordinates two N atoms of bidentate cycle-forming ligand L, the Cl atom, and two O atoms of bidentate cyclic NO ₃ ^? ion. The ClN₂O₂ coordination polyhedra are tetragonal pyramids with different degrees of distortion. The structure of complex II consists of supramolecular clusters, i.e., isolated chains incorporating the molecules of II(1) and II(2). The values of μ_eff for II–IV correspond to the d ⁹ configuration. The results of EPR and IR study suggest that complex III contains the O₄N₂ polyhedron, whereas complex IV contains the Cl₂N₂ polyhedron. Complexes I and IV were found to show a high catalytic activity in ethylene polymerization reaction.     

Kinetics of the gas-phase thermal elimination of N-alkyl-pyrazoles

The kinetic study of the gas-phase thermal elimination reactions of N-ethyl-3,5 dimethyl-pyrazole (I), N-ethyl-pyrazole (II), N-sec-butyl-pyrazole (III), and N-tert-butyl-pyrazole (IV) using a flow system is reported. After obtaining activation parameters for I we carried out competitive reactions with II, III and IV using I as internal standard to obtain their E_a. The values of Δ(ΔH) calculated for II, III and IV agree with the little differences in E_a experimentally found.