Selective photocatalytic transformations on microporous titanosilicate ETS-10 driven by size and polarity of molecules

Photocatalytic activity of microporous titanosilicate ETS-10 has been studied in water. The photoactivated ETS-10 shows catalytic activity driven by size and polarity of substrates. ETS-10 efficiently catalyzes a conversion of substrates with a size larger than the pore diameter of ETS-10. In contrast, the reactivity of small substrates depends strongly on substrate polarity; less polar substrates show higher reactivity on ETS-10. Electron spin resonance analysis reveals that large substrates or less polar substrates scarcely diffuse inside the highly polarized micropores of ETS-10 and, hence, react efficiently with hydroxyl radicals (*OH) formed on titanol (Ti-OH) groups exposed on the external surface of ETS-10. In contrast, small polar substrates diffuse easily inside the micropores of ETS-10 and scarcely react with *OH, resulting in low reactivity. The photocatalytic activity of ETS-10 is successfully applicable to selective transformations of large reactants or less polar reactants to small polar products, enabling highly selective dehalogenation and hydroxylation of aromatics.     

Ion transport in the microporous titanosilicate ETS-10

Impedance spectroscopy was used to investigate ion transport in the microporous crystalline framework titanosilicate ETS-10 in the frequency range from 1 Hz to 10 MHz. These data were compared to measured data from the microporous aluminosilicate zeolite X. Na-ETS-10 was found to have a lower activation energy for ion conduction than that of NaX, 58.5 kJ/mol compared to 66.8 kJ/mol. However, the dc conductivity and ion hopping rate for Na-ETS-10 were also lower than NaX. This was found to be due to the smaller entropy contribution in Na-ETS-10 because of its high cation site occupancy. This was verified by ion exchanging Na(+) with Cu(2+) in both microporous frameworks. This exchange decreases the cation site occupancy and reduces correlation effects. The exchanged Cu-ETS-10 was found to have both lower activation energy and higher ionic conductivity than CuX. Zeolite X has the highest ion conductivity among the zeolites, and thus the data shown here indicate that ETS-10 has more facile transport of higher valence cations which may be important for ion-exchange, environmental remediation of radionucleotides, and nanofabrication.     

EXAFS and XANES investigation of the ETS-10 microporous titanosilicate

In this work, we report state-of-the-art analysis of both Ti K-edge high-resolution XANES and EXAFS data collected on the ETS-10 molecular sieve at the GILDA BM8 beamline of the ESRF facility. The interatomic distances and the angles obtained in our EXAFS study are in fair agreement with the single-crystal XRD data of Wang and Jacobson (Chem. Commun. 1999, 973) and with the recent ab initio periodic study of Damin et al. (J. Phys. Chem. B 2004, 108, 1328) Differently from previous EXAFS work (J. Phys. Chem. 1996, 100, 449), our study supports a model of ETS-10 where the Ti atoms are bonded with two equivalent axial oxygen atoms. This model is also able to reproduce the edge and the post-edge region of the XANES spectrum. Conversely, the weak but well-defined pre-edge peak at 4971.3 eV can be explained only by assuming that a fraction of Ti atoms are in a local geometry similar to that of the pentacoordinated Ti sites in the ETS-4 structure. These Ti atoms in ETS-10 should be the terminal of the -Ti-O-Ti-O-Ti- chains, of which the actual number is strongly increased by the high crystal defectivity (Ti vacancies).     

On the crystallization mechanism of ETS-10 titanosilicate synthesized in gels containing TAABr

Thermal analysis of the products resulted during crystallization of ETS-10 by using starting co gels with molar composition 5.0 Na₂O-3.0 KF-TiO₂-6.4 HCl-TAABr-7.45 SiO₂-197.5 H₂O, where tetralkylammonium (TAA) are tetramethyl (TMA), tetraethyl (TEA), tetrapropyl (TPA) and tetrabutylammonium (TBA), was performed. The effect of TAA⁺ cations (ionic radius in hydrated forms, shapes and hydrophilic/hydrophobic character) on the crystallization of ETS-10 is evident from the induction time, t_i (TMA⁺ ? TEA⁺ < TPA⁺ < TBA⁺), the rate of crystallization, R (TMA⁺ < TEA⁺ < TPA⁺ < TBA⁺), morphology and size of crystallites. Organic cations play a “pore filling” role rather than as a “structure-directing” agent. The relatively flexible molecules of the symmetric tetraalkylammonium cations mixed with alkali cations (Na⁺, K⁺) participate directly at prenucleation and nucleation steps by their interaction with the silicate and titanate in aqueous colloidal dispersion.     

Generation of hierarchical pore systems in the titanosilicate ETS-10 by hydrogen peroxide treatment under microwave irradiation

Supermicropores and well-defined mesopores with an average size of 10 nm were created in ETS-10 structure by post-synthesis treatment with H2O2 under microwave irradiation. Macropores were also formed and the external surface area of the material was increased during the treatment.     

On the influence of ion exchange on the local structure of the titanosilicate ETS-10

The effect of ion exchange with different monovalent cations (NH(4)(+), K(+), Na(+) and Cs(+)) on the local structure of the titanosilicate ETS-10 has been studied by (29)Si MAS NMR and Raman spectroscopy. Although X-ray diffraction shows no significant influence of ion exchange on the long range order, ammonium exchange is found to result in substantial damage to the local structure. Ion exchange experiments with alkali cations under significantly more acidic conditions clearly show that the structural damage brought about by ammonium exchange is not caused by the low pH of the exchange solution. The exchange with potassium and caesium ions also leads to significant changes in the (29)Si NMR and Raman spectra. However, these changes can largely be reversed by sodium back-exchange.     

Effect of operating conditions on the removal of Pb2+ by microporous titanosilicate ETS-10 in a fixed-bed column

The breakthrough behavior of Pb2+ in an ETS-10 fixed bed was experimentally examined at various operating conditions. Results showed that the adsorption amount of Pb2+ ions per unit mass of ETS-10 particles in a column is about 1.68 mmol/g under the experimental conditions. This amount was not markedly affected by the operating conditions because of the rapid adsorption rate of Pb2+ ions on ETS-10. In the presence of competitive metal ions, the amount of Pb2+ adsorbed on ETS-10 was slightly reduced. An overshoot of the effluent concentrations of competitive metal ions Cu2+ and Cd2+ was observed in the adsorption systems of binary and ternary solutions. This is ascribed to the replacement of pre-adsorbed Cu2+ and Cd2+ ions by Pb2+ ions. The ETS-10 column broken up by Pb2+ ions can be regenerated by using an EDTA-Na2 solution and the regenerated column can be reused.     

Development and characterization of a titanosilicate ETS-10-coated optical fiber reactor towards the photodegradation of methylene blue

An optical fiber reactor (OFR) system containing uniformly distributed quartz fibers coated with titanosilicate ETS-10 crystals was investigated. Optimum ETS-10 film thickness (～1.5 μm) and coating length (15 cm) were determined from the light propagation analysis in a single ETS-10-coated fiber. The nearly constant value of the attenuation coefficient (α ≈ 0.10 cm^?1) for films with different thickness indicated uniform fiber surface coverage with these films. The extinction coefficient, ?, decreased from ～1.6 to ～1.0 μm^?1 with ETS-10 film thickness increasing from ～0.5 to ～1.5 μm, which suggested less contact per unit film thickness between light and ETS-10 crystals inside thicker films, likely due to their lower crystal packing density. Photodegradation of methylene blue (MB) conducted in the OFR showed higher photocatalytic activity for thicker ETS-10 films. Although higher MB photodegradation rates were obtained at higher light intensity, the apparent quantum efficiency, Φ, decreased with increasing light intensity. This is consistent with the charge separation mechanism for MB photodegradation in the UV light range investigated. All ETS-10 samples investigated showed ～4–5 times higher Φ values in the OFR than in the slurry reactor, likely due to the unique light/photocatalyst/reactant contact and high fiber packing density in the OFR.     

High activity in catalytic cracking of large molecules over micro-mesoporous silicoaluminophosphate with controlled morphology

A novel micro-mesoporous silicoaluminophosphate (MUS-5) with controlled morphology has been first synthesized in a two-step route. The physical properties of the silicoaluminophosphate were characterized using XRD, SEM, TEM, nitrogen adsorption-desorption and NH₃-TPD techniques. When the pH value of the solution system was varied in the range from 2.0 to 5.0, three different morphologies of silicoaluminophosphate including chain-like, flower-like and barrel-like morphology were obtained. Catalytic tests showed that the silicoaluminophosphate exhibited higher catalytic activity compared with the conventional microporous SAPO-5 under the same conditions for catalytic cracking of 1,3,5-triisopropylbenzene heavy aromatics. The remarkable catalytic reactivity was mainly attributed to the presence of the hierarchical porosity in the silicoaluminophosphate catalyst.     

Enhancement of the photocatalytic activity of modified ZnO nanoparticles with manganese additive

ZnO nanoparticles were synthesized under mild hydrothermal conditions (T = 150 °C, P = autogenous, experimental duration = 18 h). Manganese was added as an additive to ZnO nanoparticles in different molar percentages. In situ surface-modification was successfully carried out for these manganese-added ZnO nanoparticles using n-butylamine as a surface modifier. The modified manganese-added ZnO nanoparticulates are hydrophilic in nature and are well dispersed in various solvents. The modified nanoparticles were characterized using powder XRD, FTIR, SEM, Zeta potential, and UV?CVis spectrophotometry. The characterization results indicated tailoring of the morphology and size of the nanoparticles, and changing the surface chemistry of the nanoparticles synthesized. The SEM results show that the surface modified manganese-added ZnO nanoparticles have a very thin layer of organic coverage around the inorganic nanoparticles, thus, giving rise to hybrid nanoparticles. The photodegradation of Brilliant Blue dye under sunlight showed the higher efficiency of the modified manganese-doped ZnO nanoparticles compared to the reagent-grade ZnO.     

Enhancement of the photocatalytic activity and electrochemical property of graphene-SrWO4 nanocomposite

SrWO₄ is a promising candidate as not only photocatalyst for the removal of organic pollutants from water, but also electrode material for energy storage devices. However, the drawbacks of its poor adsorptive performance, low electrical conductivity, and high recombination rate of photogenerated electron-hole pair impede its practical applications. In this work, we have developed a new graphene/SrWO₄ nanocomposite synthesized via a facile chemical precipitation method. Characterizations show that SrWO₄ nanoparticles with 80 nm or so deposited on the surface of graphene nanosheets. Graphene nanosheets in the graphene-SrWO₄ hybrid could increase adsorptive property, improve the electrical conductivity of hybrid, and reduce the recombination of electron-hole pairs. As a kind of photocatalyst or electrode material for supercapacitor, the binary graphene-SrWO₄ hybrid presents enhanced photocatalytic activity and electrochemical property compared to pure SrWO₄.     

Enhancement of the photocatalytic activity of TiO(2) by doping it with calcium ions

Titanium dioxide (TiO(2)) with an enhanced photocatalytic activity was developed by doping it with calcium ions through a sol-gel method. The developed photocatalysts were characterized by Fourier transform infrared (FTIR) spectroscopy, N(2) physisorption, X-ray photoelectron spectroscopy (XPS), and X-ray diffraction. Their surface morphologies were studied using surface scanning electron microscopy (SEM). The XPS analyses confirmed the presence of Ti, O, Ca, and C in the Ca-doped TiO(2) sample. The activities of the catalysts were evaluated by photocatalytic degradation of an azo dye, acid red 1 (AR1), using UV light irradiation. The results of the investigations revealed that the samples calcined at 300 °C for 3.6h in a cyclic (2 cycles) mode had the best performance. Lower percentage dopant, 0.3-1.0 wt.%, enhanced the photocatalytic activity of TiO(2), with the best at 0.5 wt.% Ca-TiO(2). The performance of 0.5 wt.% Ca-TiO(2) in the degradation of AR1 was far superior to that of a commercial anatase TiO(2) Sigma product CAS No. 1317-70-0. The effect of pH on the degradation of AR1 was studied, and the pH of the dye solution exerted a great influence on the degradation of the dye.     

Enhancement of oxygen vacancies and solar photocatalytic activity of zinc oxide by incorporation of nonmetal

B-doped ZnO and N-doped ZnO powders have been synthesized by mechanochemical method and characterized by TG-DTA, XRD, SEM-EDX, XPS, UV-visible and photoluminescence (PL) spectra. X-ray diffraction data suggests the hexagonal wurtzite structure for modified ZnO crystallites and the incorporation of nonmetal expands the lattice constants of ZnO. The room temperature PL spectra suggest more number of oxygen vacancies exist in nonmetal-doped ZnO than that of undoped zinc oxide. XPS analysis shows the substitution of some of the O atoms of ZnO by nonmetal atoms. Solar photocatalytic activity of B-doped ZnO, N-doped ZnO and undoped ZnO was compared by means of oxidative photocatalytic degradation (PCD) of Bisphenol A (BPA). B-doped ZnO showed better solar PCD efficiency as compare to N-doped ZnO and undoped ZnO. The PCD of BPA follows first order reaction kinetics. The detail mechanism of PCD of Bisphenol A was proposed with the identification of intermediates such as hydroquinone, benzene-1,2,4-triol and 4-(2-hydroxypropan-2-yl) phenol.     

Microwave-assisted synthesis of ZnO and its photocatalytic activity in degradation of CTAB

Nanosized zinc oxide (nano-ZnO) was prepared by a microwave irradiation method using zinc nitrate and triethanolamine as starting materials and distilled water as a solvent. The as-prepared powder was characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The photocatalytic degradation of cetyltrimethylammonium bromide (CTAB) using the prepared material under UV irradiation was studied.The effects of ZnO dosage and initial pH on the photodegradation of CTAB were investigated. As the ZnO load increased, the CTAB degradation first increased and then decreased. The optimum ZnO dosage was 3 g L^–1. Photodegradation of CTAB is more efficient in slightly alkaline media (pH 9).     

Interpretation of electronic spectra of aromatic hydrocarbons by the “molecules in molecules” method

The molecules in molecules method has been applied to five groups of hydrocarbon molecules or ions. Energy, polarisation and intensity of electronic transitions have been compared with experimental data and previous theoretical results. The results show that the method is applicable even when there is relevant conjugation between the fragments.

---

Zusammenfassung Die molecules in molecules-Methode wurde auf fünf Gruppen von Kohlenwasserstoff-Molekülen angewandt. Energie, Polarisation und Intensität von elektronischen Übergängen wurden mit experimentellen und theoretischen Resultaten verglichen. Die Resultate beweisen, daß die Methode anwendbar ist, auch wenn eine wesentliche Konjugation zwischen den Fragmenten besteht.

---

Resumé La méthode molecules in molecules a té appliquée à cinq groupes de molécules ou ions d'hydrocarbures. On a comparé les energies, la polarisation et l'intensité des transitions électroniques avec les données experimentales et les données théoriques qu'on avait précedemment calculées. Les résultats indiquent que la méthode est appliquable, même lorsqu'on a une conjugation assez importante entre les fragments.

     

Enhancement of solar light photocatalytic activity of TiO2-CeO2 composite by Er3+:Y3Al5O12 in organic dye degradation

The Er³⁺:Y₃Al₅O₁₂, as an upconversion luminescence agent which is able to transform the visible part of the solar light to ultraviolet light, was prepared by nitrate-citrate sol-gel method. A novel solar light photocatalyst, Er³⁺:Y₃Al₅O₁₂/TiO₂-CeO₂ composite was synthesized using ultrasonic treatment. The X-ray diffraction (XRD) and scanning election microscopy (SEM) were used to characterize the structural morphology of the Er³⁺:Y₃Al₅O₁₂/TiO₂-CeO₂ composite. In order to evaluate the solar light photocatalytic activity of Er³⁺:Y₃Al₅O₁₂/TiO₂-CeO₂ composite, the Azo Fuchsine dye was used as a model organic pollutant. The progress of the degradation reaction was monitored by UV-Vis spectroscopy and ion chromatography. The key influences on the solar light photocatalytic activity of Er³⁺:Y₃Al₅O₁₂/TiO₂-CeO₂ were studied, such as Ti/Ce molar ratio, heat-treatment temperature and heat-treatment time. Otherwise, the effects of initial dye concentration, Er³⁺:Y₃Al₅O₁₂/TiO₂-CeO₂ amount, solar light irradiation time and the nature of the dye on the solar light photocatalytic degradation process were investigated. It was found that the solar light photocatalytic activity of Er³⁺:Y₃Al₅O₁₂/TiO₂-CeO₂ composite was superior to Er³⁺:Y₃Al₅O₁₂/TiO₂ and Er³⁺:Y₃Al₅O₁₂/CeO₂ powder in the similar conditions.     

Enhancement of muramyldipeptide (MDP) immunostimulatory activity by controlled multimerization on dendrimers

Peptidoglycan is a widespread bacterial PAMP molecule and a powerful initiator of innate immune responses. It consists of repeating units of MDP, which as a monomer is only weakly immunostimulatory. Here, MDP-coupled dendrimers were prepared and investigated for stimulation of pig blood mononuclear cells. Compared to monomeric MDP, MDP-dendrimers induced a markedly enhanced production of IL-12 p40, IL-1β and IL-6 and completely down-regulated surface expression of B7 and MHC class II. These results suggest a possible novel strategy based on controlled multimerization of minimal PAMP motifs on dendrimers for preparing molecularly defined immunostimulators with predictable bioactivities.     

Enhancement of photocatalytic activity of P25 TiO2 by vanadium-ion implantation under visible light irradiation

An ion-implantation method was used to prepare V-ion-implanted P25 TiO2 photocatalysts. Their photocatalytic activity for the degradation of formic acid under visible light irradiation (lambda>450 nm) was investigated. Upon implantation of V ions into the lattice of P25 TiO2, the photoactivity was remarkably enhanced. HRTEM images showed that the implanted V ions existed in the form of VO2(T) in the lattice of P25 TiO2. The intensity of photoluminescence (PL) spectra of V-ion-implanted P25 TiO2 decreased with the increase of the amount of implanted V ions, indicating the decrease of electron-hole pair recombination. It was also observed that the lower the PL intensity of V-ion-implanted P25 TiO2, the higher the photoactivity.     

Etching graphitic carbon nitride by acid for enhanced photocatalytic activity toward degradation of 4-nitrophenol

Graphitic carbon nitride （g-C3N4） with high photocatalytic activity toward degradation of 4-nitrophenol under visible light irradiation was prepared by HCI etching followed by ammonia neutralization. The structure, morphology, surface area, and photocatalytic properties of the prepared samples were studied. After treatment, the size of the g-C3N4 decreased from several micrometers to several hundred nanometers, and the specific area of the g-C3N4 increased from 11.5 m2/g to 115 m2/g. Meanwhile, the photocatalytic activity of g-C3N4 was significantly improved after treatment toward degradation of 4- nitrophenol under visible light irradiation. The degradation rate constant of the small particle g-C3N4 is 5.7 times of that of bulk g-C3N4, which makes it a promising visible light photocatalyst for future applications for water treatment and environmental remediation.