Higher triplet excited states of benzophenones and bimolecular triplet energy transfer measured by using nanosecond-picosecond two-color/two-laser flash photolysis

The lifetimes of benzophenone in the higher triplet excited state (BP(T(n))) and several BP derivatives in the T(n) states were measured directly to be tau(T(n))=37+/-7 ps and 20-33 ps, respectively, by using the nanosecond-picosecond (ns-ps) two-color/two-laser flash photolysis method. Based on the direct measurements of tau(T(n)) of BP(T(n)), the triplet energy transfer (TET) from BP(T(n)) to quenchers (Q), such as carbon tetrachloride (CCl4), benzene (Bz), and p-dichlorbenzene (DCB), was investigated. The fast TET from BP(T(n)) to Q can be attributed to the lifetime-dependent quenching process, according to the Ware theoretical model of the bimolecular energy transfer reaction. The contribution of the lifetime-dependent term on k(TET) was 27, 60, and 86% for CCl4, Bz, and DCB as the Q of BP(T(n)), respectively, indicating that the TET from BP(T(n)) to Q is influenced not only by tau(T(n)), but also by the size of Q.     

Intramolecular triplet energy transfer via higher triplet excited state during stepwise two-color two-laser irradiation

We studied the energy transfer processes in the molecular array consisting of pyrene (Py), biphenyl (Ph2), and bisphthalimidethiophene (ImT), (Py-Ph2)2-ImT, during two-color two-laser flash photolysis (2-LFP). The first laser irradiation predominantly generates ImT in the lowest triplet excited state (ImT(T1)) because of the efficient singlet energy transfer from Py in the lowest singlet excited state to ImT and, then, intersystem crossing of ImT. ImT(T1) was excited to the higher triplet excited state (Tn) with the second laser irradiation. Then, the triplet energy was rapidly transferred to Py via a two-step triplet energy transfer (TET) process through Ph2. The efficient generation of Py(T1) was suggested from the nanosecond-picosecond 2-LFP. The back-TET from Py(T1) to ImT was observed for several tens of microseconds after the second laser irradiation. The estimated intramolecular TET rate from Py(T1) to ImT was as slow as 3.1 x 104 s-1. Hence, long-lived Py(T1) was selectively and efficiently produced during the 2-LFP.     

A theory of nonvertical triplet energy transfer in terms of accurate potential energy surfaces: the transfer reaction from pi,pi* triplet donors to 1,3,5,7-cyclooctatetraene

Triplet energy transfer (TET) from aromatic donors to 1,3,5,7-cyclooctatetraene (COT) is an extreme case of "nonvertical" behavior, where the transfer rate for low-energy donors is considerably faster than that predicted for a thermally activated (Arrhenius) process. To explain the anomalous TET of COT and other molecules, a new theoretical model based on transition state theory for nonadiabatic processes is proposed here, which makes use of the adiabatic potential energy surfaces (PES) of reactants and products, as computed from high-level quantum mechanical methods, and a nonadiabatic transfer rate constant. It is shown that the rate of transfer depends on a geometrical distortion parameter gamma=(2g(2)/kappa(1))(1/2) in which g stands for the norm of the energy gradient in the PES of the acceptor triplet state and kappa(1) is a combination of vibrational force constants of the ground-state acceptor in the gradient direction. The application of the model to existing experimental data for the triplet energy transfer reaction to COT from a series of pi,pi(*) triplet donors, provides a detailed interpretation of the parameters that determine the transfer rate constant. In addition, the model shows that the observed decrease of the acceptor electronic excitation energy is due to thermal activation of C=C bond stretchings and C-C bond torsions, which collectively change the ground-state COT bent conformation (D(2d)) toward a planar triplet state (D(8h)).     

Competition between energy transfer and interligand electron transfer in porphyrin-osmium(II) bis(2,2':6',2' '-terpyridine) dyads

Rapid intramolecular energy transfer occurs from a free-base porphyrin to an attached osmium(II) bis(2,2':6',2' '-terpyridine) complex, most likely by way of the F?rster dipole-dipole mechanism. The initially formed metal-to-ligand, charge-transfer (MLCT) excited-singlet state localized on the metal complex undergoes very fast intersystem crossing to form the corresponding triplet excited state ((3)MLCT). This latter species transfers excitation energy to the (3)pi,pi* triplet state associated with the porphyrin moiety, such that the overall effect is to catalyze intersystem crossing for the porphyrin. Interligand electron transfer (ILET) to the distal terpyridine ligand, for which there is no driving force, competes poorly with triplet energy transfer from the proximal (3)MLCT to the porphyrin. Equipping the distal ligand with an ethynylene residue provides the necessary driving force for ILET and this process now competes effectively with triplet energy transfer to the porphyrin. The rate constants for all the relevant processes have been derived from laser flash photolysis studies.     

Morpholine-phthalocyanine (donor-acceptor) construct: photoinduced intramolecular electron transfer and triplet formation from its charge separation state

Silicon phthalocyanine (SiPc) with two axially attached morpholine (MP) units was prepared, and its photophysics was studied by laser flash photolysis, steady state and time-resolved fluorescence methods. Both the fluorescence efficiency and lifetime of SiPc moiety were remarkably quenched, because of the efficient intramolecular photoinduced electron transfer (PET) from morpholine donors to SiPc moiety. The generated charge separation state (CSS), SiPc(?-)-MP(?+), which was observed by transient absorption spectra, showed a lifetime of 4.8 ns. The triplet quantum yield of SiPc unit in the supra-molecule is unexpectedly high, and the predominant spectral signal in microsecond-scale is triplet-triplet (T(1)-T(n)) absorption. This high triplet yield is due to the charge recombination of CSS that generates T(1) in 32% efficiency: SiPc(?-)-MP(?+) → (3)SiPc-MP. The T(1) formation process occurred efficiently because the CSS SiPc(?-)-MP(?+) has a higher energy (1.65 eV) than that of the triplet state (3)SiPc-MP (1.0 eV). Emission from the CSS was also observed: SiPc(?-)-MP(?+) → SiPc-MP + hν'.     

Intra- and intermolecular electronic relaxation of the second excited singlet and the lowest excited triplet states of 1,3-dimethyl-4-thiouracil in solution

Intramolecular processes of deactivation of 1,3-dimethyl-4-thiouracil (DMTU) from the second excited singlet (S2) (pi, pi*) and the lowest excited triplet (T1) (pi, pi*) states have been studied using perfluoro-1,3-dimethylcyclohexane (PFDMCH) as a solvent. The spectral and photophysical (PP) properties of DMTU in CCl4, hexane and water have also been described. For the first time, the fluorescence from S2 state DMTU has been observed. The picosecond lifetime of DMTU in the S2 state (tau(S2)) in PFDMCH has been proposed to be determined by a very fast intramolecular reversible process of hydrogen abstraction from the ortho methyl group by the thiocarbonyl group. The shortening of tau(S2) in CCl4 is interpreted to be caused by the intermolecular interactions between DMTU (S2) and the solvent. Results of the phosphorescence decay as a function of DMTU concentration were analyzed using the Stern-Volmer formalism, which enabled determination of the intrinsic lifetime of the T1 state (tau0(T1)) and rate constants of self-quenching (k(sq)). The lifetimes, tau0(T1), of DMTU in PFDMCH and CCl4 are much longer than the values hitherto obtained in more reactive solvents. The PP properties of DMTU both in the S2 and T1 states have been shown to be determined by the thiocarbonyl group.     

Polyaryl ether dendrimer with a 4-phenylacetyl-5-pyrazolone-based terbium(III) complex as core: synthesis and photophysical properties

A series of novel dendritic beta-diketone ligands, 1-phenyl-3-[G-n]-4-phenylacetyl-5-pyrazolone (n = 0-3, G stands for polyaryl ether), were synthesized by introducing Fréchet-type dendritic branches. The corresponding Tb3+-cored dendritic complexes were characterized by X-ray crystallography, elemental analysis, ESI mass spectra, and FT-IR spectra. These dendritic complexes, prepared from aqueous solution, exhibit high stability. Interestingly, the study of photophysical properties shows that the luminescence quantum yields of the dendritic Tb-complexes increase from 0.1 to 2.26% with an increase of the dendritic generation from 0 to 3. Importantly, an "energy-reservoir effect" was observed in the dendritic system using the method based on the resonance energy transfer from these complexes to rhodamine 6G. With the increase of the dendritic generation, the metal-centered luminescence quantum yield was almost the same, and the energy transfer (phi(transfer)) from the ligand to Tb(3+) increased. Further measurements of the triplet state and oxygen quenching of these dendritic complexes verify that this enhancement of the energy transfer (phi(transfer)) is attributed to both an "antenna effect" and a "shell effect".     

Intrachain triplet energy transfer in platinum-acetylide copolymers

A series of platinum-acetylide homo- and copolymers was prepared and characterized by using photophysical methods. The polymers feature repeat units of the type [trans-Pt(PBu3)2(-CC-Ar-CC-)], where Ar = 1,4-phenylene (P) or 2,5-thienylene (T). The properties of homopolymers that contain only the 1,4-phenylene or 2,5-thienylene repeat units were compared with those of random copolymers having the structure -[-(Pt(PBu3)2(-CC-T-CC-))x-(Pt(PBu3)2(-CC-P-CC-))(1-x)-)] where x = 0.05, 0.15, and 0.25. Absorption and photoluminescence spectroscopy demonstrates that the singlet and triplet excitations localized on 1,4-phenylene units are higher in energy relative to those localized on the 2,5-thienylene units. The mechanism and dynamics of intrachain triplet energy transfer from 1,4-phenylene to the 2,5-thienylene repeats were explored in the copolymers. Photoluminescence and nanosecond transient absorption spectroscopy indicate that at room temperature P --> T energy transfer is efficient and rapid (k > 10(8) s(-1)), even in the copolymer that contains only 5% 2,5-thienylene repeat units. At 77 K, steady-state and time-resolved photoluminescence spectroscopy reveals that triplet energy transfer is much less efficient and a fraction of the triplet excitations is "trapped" on the high-energy 1,4-phenylene units. Intrachain energy transfer is believed to occur by two mechanisms, one involving P --> T singlet energy transfer followed by intersystem crossing, whereas the other involves intersystem crossing prior to P --> T triplet energy transfer. The relationship between the observed energy transfer efficiencies and mechanisms in the copolymers is discussed.     

Phosphorescent resonant energy transfer between iridium complexes

The mechanism for triplet energy transfer from the green-emitting fac-tris[2-(4'-tert-butylphenyl)pyridinato]iridium (Ir(tBu-ppy)3) complex to the red-emitting bis[2-(2'-benzothienyl)pyridinato-N,C3')(acetylacetonato)iridium (Ir(btp)2(acac)) phosphor has been investigated using steady-state and time-resolved photoluminescence spectroscopy. [2,2';5,'2' ']Terthiophene (3T) was also used as triplet energy acceptor to differentiate between the two common mechanisms for energy transfer, i.e., the direct exchange of electrons (Dexter transfer) or the coupling of transition dipoles (F?rster transfer). Unlike Ir(btp)2(acac), 3T can only be active in Dexter energy transfer because it has a negligible ground state absorption to the 3(pi-pi*) state. The experiments demonstrate that in semidilute solution, the 3MLCT state of Ir(tBu-ppy)3 can transfer its triplet energy to the lower-lying 3(pi-pi*) states of both Ir(btp)2(acac) and 3T. For both acceptors, this transfer occurs via a diffusion-controlled reaction with a common rate constant (ken = 3.8 x 10(9) L mol-1 s-1). In a solid-state polymer matrix, the two acceptors, however, show entirely different behavior. The 3MLCT phosphorescence of Ir(tBu-ppy)3 is strongly quenched by Ir(btp)2(acac) but not by 3T. This reveals that under conditions where molecular diffusion is inhibited, triplet energy transfer only occurs via the F?rster mechanism, provided that the transition dipole moments involved on energy donor and acceptor are not negligible. With the use of the F?rster radius for triplet energy transfer from Ir(tBu-ppy)3 to Ir(btp)2(acac) of R0 = 3.02 nm, the experimentally observed quenching is found to agree quantitatively with a model for F?rster energy transfer that assumes a random distribution of acceptors in a rigid matrix.     

Competition between alpha-cleavage and energy transfer in alpha-azidoacetophenones

Molecular modeling demonstrates that the first excited state of the triplet ketone (T1K) in azide 1b has a (pi,pi*) configuration with an energy that is 66 kcal/mol above its ground state and its second excited state (T2K) is 10 kcal/mol higher in energy and has a (n,pi*) configuration. In comparison, T1K and T2K of azide 1a are almost degenerate at 74 and 77 kcal/mol above the ground state with a (n,pi*) and (pi,pi*) configuration, respectively. Laser flash photolysis (308 nm) of azide 1b in methanol yields a transient absorption (lambdamax=450 nm) due to formation of T1K, which decays with a rate of 2.1 x 105 s-1 to form triplet alkylnitrene 2b (lambdamax=320 nm). The lifetime of nitrene 2b was measured to be 16 ms. In contrast, laser flash photolysis (308 nm) of azide 1a produced transient absorption spectra due to formation of nitrene 2a (lambdamax=320 nm) and benzoyl radical 3a (lambdamax=370 nm). The decay of 3a is 2 x 105 s-1 in methanol, whereas nitrene 2a decays with a rate of approximately 91 s-1. Thus, T1K (pi,pi*) in azide 1b leads to energy transfer to form nitrene 2b; however, alpha-cleavage is not observed since the energy of T2K (n,pi*) is 10 kcal/mol higher in energy than T1K, and therefore, T2K is not populated. In azide 1a both alpha-cleavage and energy transfer are observed from T1K (n,pi*) and T2K (pi,pi*), respectively, since these triplet states are almost degenerate. Photolysis of azide 1a yields mainly product 4, which must arise from recombination of benzoyl radicals 3a with nitrenes 2a. However, products studies for azide 1b also yield 4b as the major product, even though laser flash photolysis of azide 1b does not indicate formation of benzoyl radical 3b. Thus, we hypothesize that benzoyl radicals 3 can also be formed from nitrenes 2. More specifically, nitrene 2 does undergo alpha-photocleavage to form benzoyl radicals and iminyl radicals. The secondary photolysis of nitrenes 2 is further supported with molecular modeling and product studies.     

Triplet excited state characters and photosensitization mechanisms of alpha-terthienyl: a theoretical study

The triplet excited (T(1)) state characters of alpha-terthienyl (alpha-T) have been investigated using density functional theory calculations, based on which, its photosensitization mechanisms were explored. Primarily, the direct oxidation to the DNA bases by the T(1) state alpha-T through the electron transfer is not thermodynamically feasible. Secondly, 1O2 can be photogenerated both in benzene and water through the direct energy transfer from the T(1) state alpha-T to 3O2, while O2(.-) can only be formed in water through the electron transfer from the T(1) state alpha-T or alpha-T(-) to 3O2.     

Energy transfer of highly vibrationally excited naphthalene. I. Translational collision energy dependence

Energy transfer between highly vibrationally excited naphthalene and Kr atom in a series of translational collision energies (108-847 cm(-1)) was studied separately using a crossed-beam apparatus along with time-sliced velocity map ion imaging techniques. Highly vibrationally excited naphthalene in the triplet state (vibrational energy: 16,194 cm(-1); electronic energy: 21,400 cm(-1)) was formed via the rapid intersystem crossing of naphthalene initially excited to the S(2) state by 266 nm photons. The collisional energy transfer probability density functions were measured directly from the scattering results of highly vibrationally excited naphthalene. At low collision energies a short-lived naphthalene-Kr complex was observed, resulting in small amounts of translational to vibrational-rotational (T-->VR) energy transfer. The complex formation probability decreases as the collision energy increases. T-->VR energy transfer was found to be quite efficient at all collision energies. In some instances, nearly all of the translational energy is transferred to vibrational-rotational energy. On the other hand, only a small fraction of vibrational energy is converted to translational energy. The translational energy gained from vibrational energy extend to large energy transfer (up to 3000 cm(-1)) as the collision energy increases to 847 cm(-1). Substantial amounts of large V-->T energy transfer were observed in the forward and backward directions at large collision energies.     

A combined ab initio/Franck-Condon study of the A-X single-vibronic-level emission spectrum of CCl2 and the photodetachment spectrum of CCl2 -.

State-of-the-art ab initio calculations have been carried out on the X1A1, ?3B1 and A1B1 states of CCl2 and the X2B1 state of CCl2-. Franck-Condon factors including anharmonicity have been calculated, between the CCl2 states, and between the CCl2- X2B1 state and the CCl2 states. They are used to simulate the A-X single-vibronic-level (SVL) emission spectra of CCl2 determined by M.-L. Lui et al. [PCCP 2003, 5, 352] and the 364 nm laser photodetachment spectrum of CCl2- obtained by R. L. Schwartz et al. [J. Phys. Chem. A 1999, 103, 8213]. Comparison between simulated and observed spectra confirms the vibrational assignments of the X2B1 SVL emission spectra and the T0 position of the A1B1 state of CCl2. For the photodetachment spectrum of CCl2-, spectral simulation shows that the higher binding energy ?3B1(CCl2) <-- X2B1(CCl2-) band is well separated from the X1A1(CCl2) <-- X2B1(CCl2-) band. It is concluded that the observed second band, which overlaps heavily with the X1A1(CCl2) <-- X2B1(CCl2-) band in the photodetachment spectrum of CCl2- cannot be assigned to the CCl2(?3B1) + e --> CCl2-(X2B1) detachment process. Further ab initio calculations carried out in the present investigation support the suggestion that the second band in the 364 nm photodetachment spectrum of CCl2- is due to detachment from an excited state of CCl2-, a linear quartet state, to a triplet state of CCl2. These calculations identify the anionic state to be the lowest 4Sigmag- (4Sigma-) state, which photodetaches vertically to the 3Sigmag- (3Sigma-; adiabatically ?3B1) and/or 3Pi(u) (3Pi) states of CCl2 to give the second band observed in the 364 nm photodetachment spectrum of CCl2-.     

Triplet pathways in diarylethene photochromism: photophysical and computational study of dyads containing ruthenium(II) polypyridine and 1,2-bis(2-methylbenzothiophene-3-yl)maleimide units

A 1,2-bis(2-methylbenzothiophene-3-yl)maleimide model ( DAE) and two dyads in which this photochromic unit is coupled, via a direct nitrogen-carbon bond ( Ru-DAE) or through an intervening methylene group ( Ru-CH 2-DAE ), to a ruthenium polypyridine chromophore have been synthesized. The photochemistry and photophysics of these systems have been thoroughly characterized in acetonitrile by a combination of stationary and time-resolved (nano- and femtosecond) spectroscopic methods. The diarylethene model DAE undergoes photocyclization by excitation at 448 nm, with 35% photoconversion at stationary state. The quantum yield increases from 0.22 to 0.33 upon deaeration. Photochemical cycloreversion (quantum yield, 0.51) can be carried out to completion upon excitation at lambda > 500 nm. Photocyclization takes place both from the excited singlet state (S 1), as an ultrafast (ca. 0.5 ps) process, and from the triplet state (T 1) in the microsecond time scale. In Ru-DAE and Ru-CH 2-DAE dyads, efficient photocyclization following light absorption by the ruthenium chromophore occurs with oxygen-sensitive quantum yield (0.44 and 0.22, in deaerated and aerated solution, respectively). The photoconversion efficiency is almost unitary (90%), much higher than for the photochromic DAE alone. Efficient quenching of both Ru-based MLCT phosphorescence and DAE fluorescence is observed. A complete kinetic characterization has been obtained by ps-ns time-resolved spectroscopy. Besides prompt photocyclization (0.5 ps), fast singlet energy transfer takes place from the excited diarylethene to the Ru(II) chromophore (30 ps in Ru-DAE, 150 ps in Ru-CH 2-DAE ). In the Ru(II) chromophore, prompt intersystem crossing to the MLCT triplet state is followed by triplet energy transfer to the diarylethene (1.5 ns in Ru-DAE, 40 ns in Ru-CH 2-DAE ). The triplet state of the diarylethene moiety undergoes cyclization in a microsecond time scale. The experimental results are complemented with a combined ab initio and DFT computational study whereby the potential energy surfaces (PES) for ground state (S 0) and lowest triplet state (T 1) of the diarylethene are investigated along the reaction coordinate for photocyclization/cycloreversion. At the DFT level of theory, the transition-state structures on S 0 and T 1 are similar and lean, along the reaction coordinate, toward the closed-ring form. At the transition-state geometry, the S 0 and T 1 PES are almost degenerate. Whereas on S 0 a large barrier (ca. 45 kcal mol (-1)) separates the open- and closed-ring minima, on T 1 the barriers to isomerization are modest, cyclization barrier (ca. 8 kcal mol (-1)) being smaller than cycloreversion barrier (ca. 14 kcal mol (-1)). These features account for the efficient sensitized photocyclization and inefficient sensitized cycloreversion observed with Ru-DAE. Triplet cyclization is viewed as a nonadiabatic process originating on T 1 at open-ring geometry, proceeding via intersystem crossing at transition-state geometry, and completing on S 0 at closed-ring geometry. A computational study of the prototypical model 1,2-bis(3-thienyl)ethene is used to benchmark DFT results against ab initio CASSCF//CASPT2 results and to demonstrate the generality of the main topological features of the S 0 and T 1 PES obtained for DAE. Altogether, the results provide strong experimental evidence and theoretical rationale for the triplet pathway in the photocyclization of photochromic diarylethenes.     

Metal ion-promoted intramolecular electron transfer in a ferrocene-naphthoquinone linked dyad. Continuous change in driving force and reorganization energy with metal ion concentration

Thermal intramolecular electron transfer from the ferrocene (Fc) to naphthoquinone (NQ) moiety occurs efficiently by the addition of metal triflates (M(n)()(+): Sc(OTf)(3), Y(OTf)(3), Eu(OTf)(3)) to an acetonitrile solution of a ferrocene-naphthoquinone (Fc-NQ) linked dyad with a flexible methylene and an amide spacer, although no electron transfer takes place in the absence of M(n)()(+). The resulting semiquinone radical anion (NQ(*)(-)) is stabilized by the strong binding of M(n)()(+) with one carbonyl oxygen of NQ(*)(-)( )()as well as hydrogen bonding between the amide proton and the other carbonyl oxygen of NQ(*)(-). The high stability of the Fc(+)()-NQ(*)(-)/M(n)()(+)() complex allows us to determine the driving force of electron transfer by the conventional electrochemical method. The one-electron reduction potential of the NQ moiety of Fc-NQ is shifted to a positive direction with increasing concentration of M(n)()(+), obeying the Nernst equation, whereas the one-electron oxidation potential of the Fc moiety remains the same. The driving force dependence of the observed rate constant (k(ET)) of M(n)()(+)-promoted intramolecular electron transfer is well evaluated in light of the Marcus theory of electron transfer. The driving force of electron transfer increases with increasing concentration of M(n)()(+) [M(n)()(+)], whereas the reorganization energy of electron transfer decreases with increasing [M(n)()(+)] from a large value which results from the strong binding between NQ(*)(-) and M(n)()(+).     

Driving force and electronic coupling effects on photoinduced electron transfer in a fullerene-based molecular triad

Tuning thermodynamic driving force and electronic coupling through structural modifications of a carotene (C) porphyrin (P) fullerene (C60) molecular triad has permitted control of five electron and energy transfer rate constants and two excited state lifetimes in order to prepare a high-energy charge-separated state by photoinduced electron transfer with a quantum yield of essentially unity (> or = 96%). Excitation of the porphyrin moiety of C-P-C60 is followed by a combination of photoinduced electron transfer to give C-P(.+)-C60.- and singlet-singlet energy transfer to yield C-P-1C60. The fullerene excited state accepts an electron from the porphyrin to also generate C-P(.+)-C60.-. Overall, this initial state is formed with a quantum yield of 0.97. Charge shift from the carotenoid to yield C(.+)-P-C60.- is at least 60 times faster than recombination of C-P(.+)-C60.-, leading to the overall quantum yield near unity for the final state. Formation of a similar charge-separate species from the zinc analog of the triad with a yield of 40% is also observed. Charge recombination of C(.+)-P-C60.- in 2-methyltetrahydrofuran yields the carotenoid triplet state, rather than the ground state. Comparison of the results for this triad with those for related triads with different structural features provides information concerning the effects of driving force and electronic coupling on each of the electron transfer steps.     

Characterization of the singlet and triplet excited states of 3-chloro-4-methylumbelliferone

An extensive photophysical characterization of 3-chloro-4-methylumbelliferone (3Cl4MU) in the ground-state, S(0), first excited singlet state, S(1), and lowest triplet state, T(1), was undertaken in water, neutral ethanol, acidified ethanol, and basified ethanol. Quantitative measurements of quantum yields (fluorescence, phosphorescence, intersystem crossing, internal conversion, and singlet oxygen formation) together with lifetimes were obtained at room and low temperature in water, dioxane/water mixtures, and alcohols. The different transient species were assigned and a general kinetic scheme is presented, summarizing the excited-state multiequilibria of 3Cl4MU. In water, the equilibrium is restricted to neutral (N*) and anionic (A*) species, both in the ground (pK(a) = 7.2) and first excited singlet states (pK(a)* = 0.5). In dioxane/water mixtures (pH ca. 6), substantial changes of the kinetics of the S(1) state were observed with the appearance of an additional tautomeric T* species. In low water content mixtures (mixture 9:1 v:v), only the neutral (N*) and tautomeric (T*) forms of 3Cl4MU are observed, whereas at higher water content mixtures (water mole fraction superior to 0.45), all three species N*, T*, and A* coexist in the excited state. In the triplet state, in the nonprotic and nonpolar solvent dioxane, the observed transient signals were assigned as the triplet-triplet transition of the neutral form, N*(T(1)) → N*(T(n)). In water, two transient species were observed and are assigned as the triplets of the neutral N*(T(1)) and the anionic form, A*(T(1)) (also obtained in basified ethanol). The phosphorescence spectra and decays of 3Cl4MU, in neutral, acidified, and basified solutions, demonstrate that only these two species N*(T(1)) and A*(T(1)) exist in the lowest lying triplet state, T(1). The radiative channel was found dominant for the deactivation of the anionic species, whereas with the neutral the S(1) ? S(0) internal conversion competes with fluorescence. For both N* and A* the intersystem crossing yield represents a minor deactivation channel for S(1).     

Ultrafast dynamics of the excited states of 1-(p-nitrophenyl)-2-(hydroxymethyl)pyrrolidine

The dynamics of the excited states of 1-(p-nitrophenyl)-2-(hydroxymethyl)pyrrolidine (p-NPP) has been investigated using the subpicosecond transient absorption spectroscopic technique in different kinds of solvents. Following photoexcitation using 400 nm light, conformational relaxation via twisting of the nitro group, internal conversion (IC) and the intersystem crossing (ISC) processes have been established to be the three major relaxation pathways responsible for the ultrafast deactivation of the excited singlet (S(1)) state. Although the nitro-twisting process has been observed in all kinds of solvents, the relative probability of the occurrence of the other two processes has been found to be extremely sensitive to solvent polarity, because of alteration of the relative energies of the S(1) and the triplet (T(n)) states. In the solvents of lower polarity, the ISC is predominant over the IC process, because of near isoenergeticity of the S(1)(ππ*) and T(3)(nπ*) states. On the other hand, in the solvents of very large polarity, the energy of the S(1)(ππ*) state becomes lower than those of both the T(3)(nπ*) and T(2)(nπ*/ππ*) states, but those of the T(1)(ππ*) state and the IC process to the ground electronic (S(0)) state are predominant over the ISC, and hence the triplet yield is nearly negligible. However, in the solvents of medium polarity, the S(1) and T(2) states become isoenergetic and the deactivation of the S(1) state is directed to both the IC and ISC channels. In the solvents of low and medium polarity, following the ISC process, the excited states undergo IC, vibrational relaxation, and solvation in the triplet manifold. On the other hand, following the IC process in the Franck-Condon region of the S(0) state, the vibrationally hot molecules with the twisted nitro group subsequently undergo the reverse nitro-twisting process via dissipation of the excess vibrational energy to the solvent or vibrational cooling.     

The first observation of the effect of dendritic structure to produce the triplet excited state of the core stilbene by dendron excitation

We report that both singlet and triplet energy transfers in stilbene-cored benzophenone dendrimers (trans-BPST) took place quite efficiently. On excitation (290 nm) of stilbene group, the intramolecular singlet energy transfer from the excited core stilbene to the benzophenone part (99.7%) was confirmed by quenching of the fluorescence from the core stilbene. The benzophenone in the excited singlet state is known to undergo intersystem crossing to give its excited triplet state quantitatively. However, the very weak phosphorescence from benzophenone part in trans-BPST was observed even at 77 K. The phosphorescence intensity of trans-BPST is only 1% of that of model compound (4-methylbenzophenone) at 77 K. During the irradiation, the absorption spectra also changed due to the trans-cis isomerization. This is probably due to the ultrafast triplet energy transfer from the benzophenone to produce the triplet state stilbene.     

Light-harvesting fullerene dyads as organic triplet photosensitizers for triplet-triplet annihilation upconversions

Visible light-harvesting C(60)-bodipy dyads were devised as universal organic triplet photosensitizers for triplet-triplet annihilation (TTA) upconversion. The antennas in the dyad were used to harvest the excitation energy, and then the singlet excited state of C(60) will be populated via the intramolecular energy transfer from the antenna to C(60) unit. In turn with the intrinsic intersystem crossing (ISC) of the C(60), the triplet excited state of the C(60) will be produced. Thus, without any heavy atoms, the triplet excited states of organic dyads are populated upon photoexcitation. Different from C(60), the dyads show strong absorption of visible light at 515 nm (C-1, ε = 70400 M(-1) cm(-1)) or 590 nm (C-2, ε = 82500 M(-1) cm(-1)). Efficient intramolecular energy transfer from the bodipy moieties to C(60) unit and localization of the triplet excited state on C(60) were confirmed by steady-state and time-resolved spectroscopy as well as DFT calculations. The dyads were used as triplet photosensitizers for TTA upconversion, and an upconversion quantum yield up to 7.0% was observed. We propose that C(60)-organic chromophore dyads can be used as a general molecular structural motif for organic triplet photosensitizers, which can be used for photocatalysis, photodynamic therapy, and TTA upconversions.