Pyrolysis studies of aromatic polyesters

The products of pyrolysis, at 400°C in vacuo (1 Pa), of poly(ethyleneterephthalate) (PET) and poly(butyleneterephthalate) (PBT) were studied. The products were identified by gas chromatography/mass spectrometry technique. The highly volatile products of PET contained acetaldehyde, benzene, toluene, styrene and ethylbenzene and in the case of PBT, butadiene, tetrahydrofuran, vinylcyclohexene and ethylbenzene were the major products. A qualitative analysis of the products of low volatility revealed that the main components were benzoic acid, terephthalic acid, monovinyl esters of terephthalic acid and higher oligomers in the case of PET, whereas benzoic acid, monobutenyl esters of terephthalic acid and higher oligomers were the main products from PBT. The results obtained were in good agreement with those obtained from pyrolysis experiments, carried out directly in the mass spectrometer. Mechanisms to explain the occurrence of the different products are proposed.     

Autoxidation products of normal and genetically modified canola oil varieties determined using liquid chromatography with mass spectrometric detection

Normal, high stearic acid and high lauric acid canola oil varieties were heated in the presence of air to allow autoxidation to occur. After the reaction, the oils were analyzed using a non-aqueous reversed-phase high-performance liquid chromatographic separation followed by detection using atmospheric pressure chemical ionization mass spectrometry. Oxidized products were separated and identified. The major autoxidation products which remained intact were epoxides and hydroperoxides. Two classes of epoxy triacylglycerols (TAGs) were formed. One class with the epoxy group replacing a site of unsaturation and one class adjacent to a site of unsaturation, as was previously reported for model TAGs. Intact oxidation products resulted mostly from oxidation of oleic acid, while oxidation products of linoleic and linolenic acid chains decomposed to yield chain-shortened species. Both neutral and polar chain-shortened products were observed. Polar chain-shortened decomposition products eluted at very short retention times and required a different chromatographic gradient to separate the molecules. This class of molecules was tentatively identified as core aldehydes. The high stearic acid canola oil yielded more intact oxidation products containing stearic acid, as expected. The high lauric acid oil produced intact oxidation products which contained lauric acid.     

Liquid chromatography/time-of-flight mass spectrometric analyses for the elucidation of the photodegradation products of triclosan in wastewater samples

Liquid chromatography coupled with time-of-flight mass spectrometry (LC/TOFMS) was applied for the identification of four new photodegradation products of triclosan, a major antimicrobial agent used in personal care products. Wastewater samples, spiked at 7 microg/mL with triclosan, were irradiated with natural sunlight in order to generate the photodegradation products. Aliquots of the spiked water samples were taken at different times of irradiation and compounds were isolated from the water samples by solid-phase extraction. Separation and detection of the compounds and degradation products were accomplished by LC/TOFMS, which provided highly selective information about elemental compositions. Accurate mass measurements for the four degradation products permitted postulation of proposed empirical formulae in this study. Replacement of chlorine atoms by hydroxyl groups and chlorine losses are the major degradation pathways proposed. The degradation products were formed also under environmental conditions in wastewater matrices, thus suggesting their presence in real wastewater treatment processes.     

ToF‐SIMS characterization of glyoxal surface oxidation products by hydrogen peroxide: A comparison between dry and liquid samples

As one of the simplest volatile organic compounds, glyoxal and its oxidation products were considered to be important precursors to aqueous secondary organic aerosol formation. Herein, we analyzed products from glyoxal oxidation by hydrogen peroxide in dry and liquid samples using time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS). ToF‐SIMS spectra and spectral principal component analysis (PCA) were used to investigate surface oxidation products. Dry samples were prepared on clean silicon wafers. Liquid samples consisting of glyoxal and hydrogen peroxide (H₂O₂) were introduced to a vacuum compatible microfluidic reactor prior to UV illumination or dark aging followed by in situ liquid SIMS analysis. A number of reaction products were observed in both dry and liquid samples; different oligomers and carboxylic acids could be formed depending on reaction conditions. In addition, hydrolyzed products were observed in the liquid samples, but not in the dry samples. Although dry samples reveal some products of the aqueous process, they are not fully representative as results from those of the aqueous samples. Our findings suggest that the ability to characterize the liquid surface reaction products provides more realistic information of the reaction products associated with aqueous secondary organic aerosol formation in the atmosphere. Meanwhile, the high mass resolution spectra from the dry sample SIMS measurement are helpful to identify oxidation products in the liquid samples.     

裂解气相色谱-质谱联用技术研究黑香豆酊的热裂解行为

采用裂解气相色谱-质谱联用法研究了香精黑香豆酊在不同温度下的裂解行为,分析了黑香豆酊在不同温度下的热裂解产物,并用归一化法进行了定量。结果发现黑香豆酊在不同温度下表现出不同的转移行为,其热解产物和机理也各不相同。检索到苯并呋喃、香豆素和肉桂醛等16种致香物质。随着温度的升高,裂解产物中逐渐产生出有害物质。初步探讨了香豆素可能的裂解机理,为香味物质在卷烟燃烧过程的转化行为提供了例证。     

基于毛细管电泳的环介导恒温扩增技术检测方法研究

以大肠杆菌(E.coli)为对象,采用环介导恒温扩增技术(LAMP)对其扩增,在实验室自制的毛细管电泳-诱导荧光平台上建立了LAMP产物的检测新方法。引物F3,B3,FIP,BIP扩增的E.coli LAMP产物大小为240 bp。优化的毛细管电泳条件为:毛细管有效长度/总长度(10 cm/15 cm),筛分介质溶液为0.5%羟乙基纤维素(1 300 K),电场强度(100 V/cm),进样条件(100 V/cm,1.0 s)。毛细管电泳时,DNA长度在100~500 bp范围内与其迁移时间呈线性关系,相关系数为0.996。在相同毛细管电泳条件下对E.coli LAMP产物进行分析,并利用这种线性关系在电泳图中对E.coli LAMP产物与假阳性产物做区分,结果表明,毛细管电泳技术不仅可在15 min内实现LAMP产物及附加产物的快速检测,而且可快速区分LAMP阳性及假阳性实验产物。采用建立的毛细管电泳快速检测LAMP产物的方法,对AB0174 E.coli基因实施了LAMP,结果表明该方法适合DNA LAMP产物的快速检测。     

Separation of peroxidation products of diacyl-phosphatidylcholines by reversed-phase liquid chromatography-mass spectrometry

Lipid peroxidation process has attracted much attention due to the growing evidence of its involvement in the pathogenesis of age-related diseases. The monitoring of the lipid peroxidation products in phospholipids, formed under oxidative stress conditions, may provide new markers for oxidative stress signaling and for disease states, giving new insights in the pathogenesis process. Reversed-phase liquid chromatographic method coupled to mass spectrometry was developed for the separation of oxidized glycero-phosphatidylcholine (GPC) peroxidation products formed by the Fenton reaction that mimic in vivo oxidative stress conditions. The LC-MS conditions were applied for the separation of peroxidation products of oleoyl- (POPC), lineloyl- (PLPC) and arachidonoyl-palmitoyl phosphatidylcholine (PAPC). The peroxidation products separated included products resulting from the insertion of oxygen atoms in the sn-2 chain (long-chain), and products with the sn-2 chain shortened resulting from cleavage of oxygen-centered radicals (short-chain). Among long-chain products were the keto, hydroxy, hydroperoxide and poly-hydroxy derivatives, while short-chain products included dicarboxylic acids, aldehydes and hydroxy-aldehydes. Separation of long-chain products formed in each phosphatidylcholine was observed, and the reconstructed ion chromatogram of each ion showed an increase in the number of peaks with the increase in the number of oxygen atoms inserted into the phospholipid. Separation of short-chain products took place according to the functional group present at the sn-2 moiety that allowed the elution of dicarboxylic acids distinct from aldehydes. Separation between isomeric structures that were present in short- and long-chain products was also achieved.     

Photoinduced reactions of bicycloalkylidenes with isatin and isoquinolinetrione

Photoinduced reactions of isatin and N-methyl-1,3,4-isoquinolinetrione with bicycloalkylidenes such as bicyclopropylidene, cyclopropylidenecyclobutane, cyclopropylidenecyclohexane and bicyclohexylidene were investigated. The reactions gave spirooxetanes as the major products derived from the [2 + 2] photocycloaddition pathway via 1,4-biradical recombination. Unusual products including the [4 + 2 + 2] cycloadducts, the oxoisochroman derivatives and other ring-rearranged products were derived from competitive pathways via 1,6-biradical recombination. The presence of oxygen in the reaction solution was found to be relevant to the distribution of different types of products. Mechanisms were proposed to rationalize the chemo- and regioselectivity in the photoreactions and the origin of the different types of products.     

The Reaction between Diaminotetraalkoxycyclotriphosphazene Compounds and Toluene Diisocyanate and the Adhesive Property of the Products

The reaction of diaminotetraalkoxycyclotriphosphazene compounds with toluene diisocyanate using the mole ratio 1:1 were carried out in benzene for 24 h. The products having the highest average molecular weight was prepared when dimethylamino-tetraethoxycyclotriphosphazene was reacted with toluene diisocyanate. It was found from H-NMR, infrared absorption spectra, and chemical analysis that the products were cyclolinearphos-phazene oligomers. The products dissolved in DMF were coated on polyvinyl chloride laminate and a test of adhesive bonding strength was made. However, it was difficult to obtain satisfactory results for the adhesives although the products were nonflammable materials.     

裂解气相色谱—裂解毛细柱气相色谱联用仪

设计了一种裂解气相色谱--裂解毛细柱气相色谱联用仪。在第一级裂解气相色谱仪把聚合物裂解并分离裂解产物,分离了的产物用六通气体进样阀选取并逐个在第二级裂解气相色谱仪裂解,得到聚合物裂解产物的裂解气相色谱图。与低分子化合物的标准指纹图比较,这些裂解产物就得到确认,这样,就可以充分肯定地推断复杂聚合物的组成。     

易溶性铜酞菁磺酸酯的合成及其凝聚性能

将酞菁氯磺化,然后与含有羟基的化合物反应,合成了铜酞菁磺酸苯酯、铜酞菁磺酸邻甲基苯酯、铜酞菁磺酸萘酯和铜酞菁磺酸 4 乙基萘酯,并测定了产物在不同溶剂中的溶解度、凝聚性能及红外光谱.这类铜酞菁衍生物的酯溶性很好.     

An integrated method for degradation products detection and characterization using hybrid ion trap/time-of-flight mass spectrometry and data processing techniques: Application to study of the degradation products of danofloxacin under stressed conditions

A new strategy using hybrid ion trap/time-of-flight mass spectrometry coupled with high-performance liquid chromatography and post-acquisition data mining techniques was developed and applied to the detection and characterization of degradation products of danofloxacin. The degradation products formed under different forced conditions were separated using an ODS-C18 column with gradient elution. Accurate full-scan MS data were acquired in the first run and processed with the combination of extracted ion chromatograms and LC-UV chromatograms. These processes were able to find accurate molecular masses of possible degradation products. Then, the accurate MS/MS data acquired through data-dependent analysis mode in another run facilitated the structural elucidations of degradation products. As a result, a total of 11 degradation products of danofloxacin were detected and characterized using the developed method. Overall, this analytical strategy enables the acquisition of accurate-mass LC/MS data, search of a variety of degradation products through the post-acquisition processes, and effective structural characterization based on elemental compositions of degradation product molecules and their product ions. The ability to measure degradation products via tandem mass spectrometry coupled with accurate mass measurement, all in only two experimental runs, is one of the most attractive features of this methodology. The results demonstrate that use of the LC/MS-IT-TOF approach appears to be rapid, efficient and reliable in structural characterization of drug degradation products.     

取代芳烃电解氧化产物的GC-MS分析（I）

采用GC-MS方法分析了两种取代芳烃直接电解氧化的产物；从对伞花烃电解氧化产物中鉴定出10种主要成分，从对二甲苯电解氧化产物中鉴定出8种主要成分；根据成分鉴定和含量测定结果，提出了以获取目标产物枯茗醛和对甲基苯甲醛为目的的电解氧化反应要求。     

Identification of electrical degradation products of 4-chlorophenol in water.

The electrical decomposition of 4-chlorophenol in water was examined with iridium dioxide doped on atitanium electrode. A number of electrical degradation products of 4-chlorophenol, such as hydroquinone and chlorohydroquinone via the addition of hydroxyl radicals, and dichlorophenol through addition of chlorine radical, were observed as major products. Moreover, hydroxylated chlorobiphenylethers, hydroxylated dibenzo-p-dioxin/furans and hydroxylated chlorobiphenyls formed by a dimerization process during the electrolysis process of 4-chlorophenol were also observed. On the other hand, benzoquinone, muconic acid and aldehyde derivatives that were further oxidative products of hydroquinone formed by photocatalysis process, were not observed. The electrical decomposition products of 4-chlorophenol were trimethylsilylated and then identified by gas chromatography-mass spectrometry. The degradation rate of 4-chlorophenol in water by iridium oxide electrode was measured against the electrical process duration. After iridium electrical process for 120 min, about 50% of 4-chlorophenol was converted into a number of products through oxidation processes. On the basis of the identified products, the degradation pathways of 4-chlorophenol under electrolysis process were proposed.     

Non-volatile products of triolein produced at frying temperatures characterized using liquid chromatography with online mass spectrometric detection.

Oxidation products from triolein under model heated frying conditions have been analyzed using liquid chromatography with an evaporative light scattering detector and atmospheric pressure chemical ionization (APCI) mass spectrometric detection. Triolein was heated at 190 degrees C with 2% water added each hour, to simulate the moisture of a frozen product, until polar components reached approximately 30%. The samples were separated using reversed-phase high-performance liquid chromatography with APCI-MS detection. Triolein oxidation products included hydroperoxides, epoxides and a ketone. Other products were formed by shortening of an acyl chain on the intact triolein. Normal and oxygen-containing products formed by the dimerization of triolein were also observed. Other products included chain addition products formed by addition of acyl chain subunits to intact triolein to form higher molecular weight products.     

N,N'-dimethylformamide-derived products from catalytic oxidation of 3-hydroxyflavone

The biomimetic conversion of 3-hydroxyflavone in the presence of a copper(II) catalyst, dioxygen, and N,N'-dimethylformamide to oxidation products as well as two previously unreported solvent-derived products is seen. The two solvent-derived products were characterized, and their crystal structures were determined.     

Preparation and characterization of chitin benzoic acid esters

Chitin benzoic acid esters were prepared using a phosphoryl mixed anhydride method. The products were characterized by 1H-NMR and FT-IR spectroscopy. FT-IR analysis revealed that the degree of O-acyl substitution of the products was in a range of 1.17-1.83. Morphological surface changes in the parent molecule due to the introduction of benzoic acid moieties were observed by scanning electron microscopy. The surface of the products was porous, in contrast to the sheet-shape of the parent molecules. The solubility of the products, which improved with increased degree of acid substitution, was tested in various organic solvents.     

Synthesis of Polymers by Using Divalent Metal Salts of Mono(hydroxyethyl) Phthalate: Metal-Containing Three-Dimensional Polyesters from Metal Salts,Pyromellitic Dianhydride,and Epoxides

Syntheses of metal-containing three-dimensional polyesters were investigated by the reactions of divalent metal salts of mono(hydroxyethyl) phthalate-pyromellitic dianhydride-epoxide in DMF at 90° C. The metal carboxylate groups of these metal salts catalyzed the reactions. Systems with low metal salt content gelled during reaction. The yield of the products obtained by precipitating or washing with water increased with decreasing metal salt content in the feed. The products were metal-containing, three-dimensional polyesters containing ionic links; they were slightly yellow powdery materials. Hydroxyl values of the products were much higher than the values of acidity. Inherent viscosities (in DMF at 30° C) of the products obtained from the systems which did not gel were low, ranging from 0.031 to 0.083. The thermal stability of the products showed a tendency to increase with decreasing metal salt content in the feed.     

Products of non-flaming combustion of phenol-formaldehyde resin foam

Phenol-formaldehyde foam was decomposed by non-flaming combustion under temperature and atmosphere conditions simulating the main stages of a fire development and the decomposition products were studied. The type and amounts of the products were affected by the decomposition conditions. The residue yield, which was large, decreased with increase in temperature and atmospheric oxygen. Volatile products consisted mostly of light gases with some volatile-condensable products. The volatile products included light hydrocarbons, formaldehyde, phenols, aldehydes, ketones, ethers, oxygen-containing heterocycles, fused ring compounds and benzene and its homologues. The concentration dependence on combustion conditions was studied.     

Thermal decomposition of polystyrene foam under controlled atmosphere and temperature conditions

The thermal decomposition of polystyrene foam with and without tetrabromovinylcyclohexene, at sample sizes permitting secondary reactions, was studied. The decomposition was carried out in a carefully controlled device providing high reproducibility at 823, 1023 and 1223 K, in air, in a mixture of air and nitrogen and in nitrogen. No flame source was included. The volatile products (boiling range roughly 350–750 K) were studied by gas chromatography—mass spectrometry.The study showed that the amounts of the products were dependent on the decomposition temperature and on the kind of sample. The products were very complex mixtures, containing, amongst others, monomer, oligomers, fused aromatic ring compounds, oxidized hydrocarbons and bromine-containing products. The types and amounts of the products were influenced by the atmosphere, the decomposition temperature and the type of sample.