Vibrational spectra and microstructure of poly(ε-caprolactone)/siloxane biohybrids doped with lithium triflate

Fourier Transform infrared (FT-IR) and Raman (FT-Raman) spectroscopies and Scanning Electron Microscopy (SEM) were used to investigate ionic association, hydrogen bonding and morphology in a family of sol–gel derived lithium triflate (LiCF₃SO₃)-doped di-urethane cross-linked poly(ε-caprolactone) (PCL(530))/siloxane hybrid electrolytes. The materials studied, with compositions ∞ > n  0.5 (where n – composition – expresses the molar ratio of PCL(530) ester repeat units per Li⁺ ion), are non-porous and homogeneous. The Li⁺ ions interact with the urethane and ester carbonyl oxygen atoms within the whole range of salt concentration analyzed, promoting the formation of hydrogen-bonded aggregates. The composition dependence of the relative concentration of “free” anions and coordinated anions (weakly coordinated anions, ion pairs or [Li(CF₃SO₃)₂]⁻ triplets, aggregates I ([Li₂(CF₃SO₃)]⁺) and aggregates II ([Li₃(CF₃SO₃)]²⁺) in all the samples is in perfect agreement with the values of the room temperature ionic conductivity reported previously.     

Comparative characteristics of texture and properties of hybrid organic–inorganic adsorbents functionalized by amine and thiol groups

The structure and texture characteristics of the hybrid organic–inorganic adsorbents, which were obtained by using of two-component systems of “structure-forming agent/trifunctional silane”, are compared as follows: the first component is Si(OC₂H₅)₄ or (C₂H₅O)₃Si–A–Si(OC₂H₅)₃, where A = –(CH₂)₂– or –C₆H₄–; the second one is alkoxysilane with amine (–NH₂, NH, –NH(CH₂)₂NH₂) and thiol (–SH) groups. The adsorbents, derived from TEOS, have more accessible functional groups (2.6–4.2 mmol/g) than xerogels, which are based on bis(triethoxysilanes) (1.0–2.6 mmol/g). On another hand xerogels derived from bis(triethoxysilanes) have a more extended porous structure (S_sp =516–968 m²/g, V_s = 0.418–1.490 cm³/g, d = 2.5–15.0 nm) than those that are based on TEOS (S_sp = 4–631 m²/g, V_s = 0.005–1.382 cm³/g, d = 2.3–17.7 nm). The geometric dimensions of functional groups have a more essential effect on the parameters of porous structure in the case of TEOS-derived xerogels. Using solid-state NMR spectroscopy, it has been shown that in synthesis of xerogels with the use of TEOS, the molecular frame of globules is formed by structural units Qⁿ (n = 2,3,4), and the functional groups exist as structural units of Tⁿ (n = 2,3). The xerogels obtained with using bis(triethoxysilanes) consist only of structural units of Tⁿ-type (n = 1,2,3).     

Constructions of a set of novel hydrogen-bonded supramolecules from reactions of cobalt(II) salt with bis(3,5-dimethylpyrazolyl)methane and different carboxylic acids

Reactions of CoX₂·6H₂O (X = Cl⁻, ClO₄⁻) with bis(3,5-dimethylpyrazolyl)methane (dmpzm) and formic acid, acetic acid, benzoic acid, salicylic acid, maleic acid, or fumaric acid under the presence of KOH solution produced a new family of Co(II)/dmpzm complexes, [Co(dmpzm)₂L]X·nH₂O (1: L = O₂CH, X = Cl, n = 2; 2: L = OAc, X = Cl, n = 3; 3: L = benzoate, X = ClO₄, n = 1/3; 4: L = salicylate, X = ClO₄, n = 1/3) and [Co₂(dmpzm)₄L](ClO₄)₂·nSolv (5: L = maleate, n = 3, Solv = H₂O; 6: L = fumarate, n = 2, Solv = MeOH). These compounds were structurally characterized by elemental analysis, IR spectroscopy, and single-crystal X-ray diffraction. Compounds 1–4 are mononuclear while 5–6 are binuclear. Each cobalt atom of 1–6 is hexacoordinate, with a distorted octahedral CoN₄O₂ coordination geometry incorporating two N,N′-bidentate dmpzm ligands and one O,O′-bidentate carboxylate ligand. There are rich intra- and intermolecular hydrogen bonds in the crystals of 1–6, thereby forming either 2D hydrogen-bonded networks (1 and 2) or 3D hydrogen-bonded networks (3–6). In addition, the thermal behaviors of 1–6 were also investigated.     

Ergebnisse aus versuchen zur darstellung von bis(trifluormethylsulphanyl)thioketen (CF3S)2C=C=S

The attempted preparation of bis(trifluoromethylsulphanyl)thioketene is described. Mono-and di-(trifluoromethylsulphanyl)-substituted orthothioesters may be prepared fromCH₃C(SC₂H₅)₃ and CF₃SCl in the presence of anhydrous ZnCl₂. The unstable compoundshave been isolated and characterized. The corresponding CF₃Se and CF₃SO₂ derivativesare only formed as intermediates which decompose to ketene diethylmercaptal. Suchmono- and di-substituted products are obtained in good yield from H₂C=C(SC₂H₅)₂ andCF₃ECl (E=S, Se). The reaction of H₂C=C(SC₂H₅)₂ with CF₃SO₂F gave only poor yieldsof (CF₃SO₂)_nCH_2−n=C(SC₂H₅)₂ (n=1, 2) which were only capable of characterizationin etheral solution by spectral means. Attempts to prepare (CF₃S)₂C=C=S by refluxing(CF₃S)₂CHC(O)Cl, (CF₃S)₂CHC(O)OH or (CF₃S)₂C=C=O with P₄S₁₀ in toluene yieldedonly the cyclic dimer and the corresponding 1,3,4-trithiolan.     

Polarized absorption spectra and polarized Raman spectra of single crystals of trans(Cl2)-[CoCl2(NH3)n(H2O)4−n]Cl complexes (n = 2, 3, 4)

The title cobalt(III) complexes have been investigated by polarized absorption and Raman spectroscopies of the single crystals. The symmetry properties of the d-electron orbitals and of the vibrational modes attributable to the Raman bands of trans(Cl₂)-[CoCl₂(NH₃)_n(H₂O)_4−n]Cl complexes (n = 2, 3, or 4) were examined to elucidated the peculiar observation that ligand substitution causes no splitting of the 15 200-cm⁻¹ absorption band and the 250-cm⁻¹ Raman band. Effects of replacing the NH₃ ligand with H₂O on the electronic structure, atom–atom force constants and vibrational modes of these complex ions are briefly described.     

Reactivity and electronic property of decaphenylmetallocenes of Mo and W atoms

The perphenylmetallocene complexes (η⁵-C₅Ph₅)₂W (1), [(η⁵-C₅Ph₅)₂W]⁺I₃⁻ (1⁺I₃), (η⁵-C₅Ph₅)₂Mo (2) and [(η⁵-C₅Ph₅)₂Mo]⁺I₃⁻ (2⁺I₃) have been prepared. Hydrogenation of 1 in THF produces (η⁵-C₅Ph₅)₂WH₂ (4), while (η⁵-C₅Ph₅)₂WHCl (3) is afforded in 1,2-dichloroethane solvent. Carbonylation of 1 produces (η⁵-C₅Ph₅)₂W(CO) (5). Treatment of 1 with the strong acid CF₃SO₃H leads to the dicationic species [(η⁵-C₅Ph₅)₂W]⁺²[CF₃SO₃]⁻₂ (1⁺²Tf₂) after crystallization. The structures of 2⁺I₃ and 1⁺²Tf₂ have been determined by an X-ray diffraction study. The magnetic susceptibility study indicates a ³E_2g ground-state for 1 and 2, and a ⁴A_2g ground-state for 1⁺ and 2⁺.     

Sequential injection analysis (SIA)-chemiluminescence determination of indomethacin using tris[(2,2'-bipyridyl)]ruthenium(III) as reagent and its application to semisolid pharmaceutical dosage forms

Automated sequential injection (SIA) method for chemiluminescence (CL) determination of nonsteroidal anti-inflammatory drug indomethacin (I) was devised. The CL radiation was emitted in the reaction of I (dissolved in aqueous 50% v/v ethanol) with intermediate reagent tris(2,2′-bipyridyl)ruthenium(III) (Ru(bipy)₃³⁺) in the presence of acetate. The Ru(bipy)₃³⁺ was generated on-line in the SIA system by the oxidation of 0.5 mM tris(2,2′-bipyridyl)ruthenium(II) (Ru(bipy)₃²⁺) with Ce(IV) ammonium sulphate in diluted sulphuric acid. The optimum sequence, concentrations, and aspirated volumes of reactant zones were: 15 mM Ce(IV) in 50 mM sulphuric acid 41 μL, 0.5 mM Ru(bipy)₃²⁺ 30 μL, 0.4 M Na acetate 16 μL and I sample 15 μL; the flow rates were 60 μL s⁻¹ for the aspiration into the holding coil and 100 μL s⁻¹ for detection. Calibration curve relating the intensity of CL (peak height of the transient CL signal) to concentration of I was curvilinear (second order polynomial) for 0.1–50 μM I (r = 0.9997; n = 9) with rectilinear section in the range 0.1–10 μM I (r = 0.9995; n = 5). The limit of detection (3σ) was 0.05 μM I. Repeatability of peak heights (R.S.D., n = 10) ranged between 2.4% (0.5 μM I) and 2.0% (7 μM I). Sample throughput was 180 h⁻¹. The method was applied to determination of 1 to 5% of I in semisolid dosage forms (gels and ointments). The results compared well with those of UV spectrophotometric method.     

Crystalline polysilicate magadiite with intercalated n-alkylmonoamine and some correlations involving thermochemical data

Synthesized hydrated lamellar acidic crystalline magadiite (H₂Si₁₄O₂₉·2H₂O) nanocompound was used as host for intercalation of polar n-alkylmonoamine molecules of the general formula H₃C(CH₂)_nNH₂ (n = 1–6) in aqueous solution. The original interlayer distance (d) of 1500 pm, determined by X-ray powder diffraction patterns, increases after intercalation. The values correlated with the number of aliphatic amine carbon (n_c) atoms: d = [(1312 ± 11) + (21 ± 2)]n_c. The amount of intercalated amines (N_s), decreased as n_c increased: N_s = [(5.82 ± 0.04) − (0.45 ± 0.01)]n_c. The acidic layered nanocompound was calorimetrically titrated with the amines and the thermodynamic data gave exothermic values for all guest molecules, as shown by the correlation: Δ_intH = −[(24.45 ± 0.49) − (1.91 ± 0.10)]n_c and d = [(1576 ± 16) − (10.8 ± 1.0)]Δ_intH. The negative values of the Gibbs energies and the positive entropies also presented the correlations: Δ_intG = −[(22.8 ± 0.2) − (0.2 ± 0.1)]n_c and Δ_intS = [(6 ± 1) + (5 ± 1)]n_c, respectively.     

Structures and conformations of trifluoromethanesulfonic anhydride, (CF3SO2)2O, and bis(trifluoromethylsulfonyl)difluoromethane, (CF3SO2)2CF2

The geometric structures and conformational properties of trifluoromethanesulfonic anhydride, (CF₃SO₂)₂O, and bis(trifluoromethylsulfonyl)difluoromethane, (CF₃SO₂)₂CF₂ have been studied by gas electron diffraction (GED) and ab initio calculations (HF/3–21G*). The calculations predict for both systems two stable conformers with C₂ symmetry and one with C₁ symmetry. In both compounds structures with C₂ symmetry and dihedral angles SOSC ≈ 100° ((CF₃SO₂)₂O) and SCSC ≈ 150° ((CF₃SO₂)₂CF₂) are lowest in energy. According to the GED analyses the dominant conformer of (CF₃SO₂)₂O possesses C₂ symmetry with SOSC dihedral angles of 99.1(14)°. The presence of up to 30% of the two other conformers cannot be excluded; for (CF₃SO₂)₂CF₂ only one conformer with C₂ symmetry and SCSC dihedral angles of 143(2)° is observed. A complete set of geometric parameters is given.     

Structures and conformations of trifluoromethanesulfonic anhydride, (CF3SO2)2O, and bis(trifluoromethylsulfonyl)difluoromethane, (CF3SO2)2CF2

The geometric structures and conformational properties of trifluoromethanesulfonic anhydride, (CF₃SO₂)₂O, and bis(trifluoromethylsulfonyl)difluoromethane, (CF₃SO₂)₂CF₂ have been studied by gas electron diffraction (GED) and ab initio calculations (HF/3–21G*). The calculations predict for both systems two stable conformers with C₂ symmetry and one with C₁ symmetry. In both compounds structures with C₂ symmetry and dihedral angles SOSC ≈ 100° ((CF₃SO₂)₂O) and SCSC≈ 150° ((CF₃SO₂)₂CF₂ are lowest in energy. According to the GED analyses the dominant conformer of (CF₃SO₂)₂O₂ possesses C₂ symmetry with SOSC dihedral angles of 99.1(14)°. The presence of up to 30% of the two other conformers cannot be excluded; for (CF₃SO₂)₂CF₂ only one conformer with C₂ symmetry and SCSC dihedral angles of 143(2)° is observed. A complete set of geometric parameters is given.     

The electrolyte NRTL model and speciation approach as applied to multicomponent aqueous solutions of H2SO4, Fe2(SO4)3, MgSO4 and Al2(SO4)3 at 230–270 °C

This work presents chemical modeling of solubilities of metal sulfates in aqueous solutions of sulfuric acid at high temperatures. Calculations were compared with experimental solubility measurements of hematite (Fe₂O₃) in aqueous ternary and quaternary systems of H₂SO₄, MgSO₄ and Al₂(SO₄)₃ at high temperatures. A hybrid model of ion-association and electrolyte non-random two liquid (ENRTL) theory was employed to fit solubility data in three ternary systems H₂SO₄–MgSO₄–H₂O, H₂SO₄–Al₂(SO₄)₃–H₂O at 235–270 °C and H₂SO₄–Fe₂(SO₄)₃–H₂O at 150–270 °C. Employing the Aspen Plus™ property program, the electrolyte NRTL local composition model was used for calculating activity coefficients of the ions Al³⁺, Mg²⁺ Fe³⁺ and SO₄²⁻, HSO₄⁻, OH⁻, H₃O⁺, respectively, as well as molecular species. The solid phases were hydronium alunite (H₃O)Al₃(SO₄)₂(OH)₆, hematite Fe₂O₃ and magnesium sulfate monohydrate (MgSO₄)·H₂O which were employed as constraint precipitation solids in calculating the metal sulfate solubilities. A correlation for the equilibrium constants of the association reactions of complex species versus temperature was implemented. Based on the maximum-likelihood principle, the binary interaction energy parameters for the ionic species as well as the coefficients for equilibrium constants of the reactions were obtained simultaneously using the solubility data of the ternary systems. Following that, the solubilities of metal sulfates in the quaternary systems H₂SO₄–Fe₂(SO₄)₃–MgSO₄–H₂O, H₂SO₄–Fe₂(SO₄)₃–Al₂(SO₄)₃–H₂O at 250 °C and H₂SO₄–Al₂(SO₄)₃–MgSO₄–H₂O at 230–270 °C were predicted. The calculated results were in excellent agreement with the experimental data.     

Baeyer-Villiger Oxidation of Cyclic Ketones Catalyzed by Amino Acid Ionic Liquids

A series of amino-acid-based ionic liquids was synthesized via one-step protonation of the corresponding L-amino acid by utilizing an array of proton sources. The catalytic activity of the amino-acid-based ionic liquids for the Baeyer-Villiger oxidation of cyclic ketones was investigated using cyclopentanone as a model cycloketone. The proline-based ionic liquid [ProH]CF₃SO₃ was shown to exhibit the best catalytic activity. The reaction condition was optimized to give the following reagent ratio of n(cyclopentanone):n(catalyst):n(H₂O₂)=1:0.06:4, 60℃ and 6 h. Under the optimum conditions, the conversion of cyclopentanone was 96.57% and the selectivity for δ-valerolactone was 73.01%. The catalytic activity was shown to be constant after 4 cycles. A simple treatment was allowed for the recover and the reuse of [ProH]CF₃SO₃. The successful utilization of [ProH]CF₃SO₃ to catalyze a host of cyclic ketones via Baeyer-Villiger oxidation clearly demonstrated the capacity of [ProH]CF₃SO₃ to tolerate variation in the substrate.     

Flow injection determination of bismuth in urine by successive retention of Bi(III) and tetrahydroborate(III) on an anion-exchange resin and hydride generation atomic absorption spectrometry

Bismuth as BiCl₄⁻ and BH₄⁻ ware successively retained in a column (150 mm × 4 mm, length × i.d.) packed with Amberlite IRA-410 (strong anion-exchange resin). This was followed by passage of an injected slug of hydrochloric acid resulting in bismuthine generation (BiH₃). BiH₃ was stripped from the eluent solution by the addition of a nitrogen flow and the bulk phases were separated in a gas–liquid separator. Finally, bismutine was atomized in a quartz tube for the subsequent detection of bismuth by atomic absorption spectrometry. Different halide complexes of bismuth (namely, BiBr₄⁻, BiI₄⁻ and BiCl₄⁻) were tested for its pre-concentration, being the chloride complexes which produced the best results. Therefore, a concentration of 0.3 mol l⁻¹ of HCl was added to the samples and calibration solutions. A linear response was obtained between the detection limit (3σ) of 0.225 and 80 μg l⁻¹. The R.S.D.% (n = 10) for a solution containing 50 μg l⁻¹ of Bi was 0.85%. The tolerance of the system to interferences was evaluated by investigating the effect of the following ions: Cu²⁺, Co²⁺, Ni²⁺, Fe³⁺, Cd²⁺, Pb²⁺, Hg²⁺, Zn²⁺, and Mg²⁺. The most severe depression was caused by Hg²⁺, which at 60 mg l⁻¹ caused a 5% depression on the signal. For the other cations, concentrations between 1000 and 10,000 mg l⁻¹ could be tolerated. The system was applied to the determination of Bi in urine of patients under therapy with bismuth subcitrate. The recovery of spikes of 5 and 50 μg l⁻¹ of Bi added to the samples prior to digestion with HNO₃ and H₂O₂ was in satisfactory ranges from 95.0 to 101.0%. The concentrations of bismuth found in six selected samples using this procedure were in good agreement with those obtained by an alternative technique (ETAAS). Finally, the concentration of Bi determined in urine before and after 3 days of treatment were 1.94 ± 1.26 and 9.02 ± 5.82 μg l⁻¹, respectively.     

Monodentate and bidentate trifluoroacetato ligands in bis(trifluoroacetato)-(N-methyl-meso-tetraphenylporphyrinato)thallium(III)—a new dynamic 4:3 piano stool seven-coordinate geometry

The crystal structure of bis(trifluoroacetato)-(N-methyl-meso-tetraphenylporphyrinato) thallium(III), Tl(N---Me---tpp)(CF₃CO₂)₂ (2), was established and the coordination sphere around the Tl³⁺ ion is described as 4:3 tetragonal base–trigonal base piano stool seven-coordinate geometry in which the two cis CF₃CO₂ ⁻ groups occupy two apical sites. The plane of the three pyrrole nitrogen atoms [i.e. N(2), N(3) and N(4)] strongly bonded to Tl³⁺ is adopted as the reference plane 3N. The pyrrole N(1) ring bearing the methyl group [i.e. C(45)H₃] is the most deviated one from the 3N plane making a dihedral angle of 23.3° whereas smaller angles of 9.9, 2.7 and 4.7° occur with pyrroles N(2), N(3), and N(4), respectively. Because of the larger size of the thallium(III) ion, Tl is considerably out of the 3N plane; its displacement of 1.02 Å is in the same direction as that of the two apical CF₃CO₂ ⁻ ligands. The intermolecular trifluoroacetate exchange process for 2 in CD₂Cl₂ solvent is examined through ¹⁹F and ¹³C NMR temperature-dependent measurements. In the slow-exchange region, the CF₃ and carbonyl (CO) carbons of the CF₃CO₂ ⁻ groups in 2 are separately located at δ 114.3 [¹J(C–F)=290 Hz, ³J(Tl–C)=411 Hz] and 155.1 [²J(C–F)=37 Hz, ²J(Tl–C)=204 Hz], respectively, at −106 °C. In the same slow-exchange region, the fluorine atoms of 2, Tl(N---Me---tpp)(CF₃CO₂)⁺ and the free CF₃CO₂ ⁻ are located at δ −73.76 [⁴J(Tl–F)=44 Hz], −73.30 [⁴J(Tl–F)=22 Hz], and −76.15 ppm at −97 °C, respectively.     

Two-photon laser optogalvanic studies of the 6snf F4 Rydberg states of mercury by RF discharge

We present new experimental data on the energies and quantum defects of the highly excited states in mercury using the laser optogalvanic detection technique in conjunction with a RF discharge cell. The 6snp ³P₂ (12 ≤ n ≤ 25) and 6snf ³F₄ (9 ≤ n ≤ 52) Rydberg series have been observed via two photon excitation from the 6s6p ³P₂ intermediate state, which is collisionally populated in the RF discharge. Three lines corresponding to transitions from the 6s6p ³P₀ metastable state to 6s8p ³P_0,2 and 6s5f ³F₂ states are also located. The 6snf ³F₄ Rydberg series to such high n-values are reported for the first time.     

Effect of high coverages on proton transfer in the zeolite/water system

The density functional theory and Hartree–Fock methods were used to investigate the proton transfer reaction for a series of model clusters of zeolite/(H₂O)_n; n=1,2,3, and 4. Without promoted water, the hydrogen-bonded dimer of the water/zeolite system exists as a simple hydrogen-bonded complex, ZOH.(H₂O)₂, and no proton transfer occurs from zeolite to water. The third promoted water, ZOH(H₂O)₂H₂O, was found to induce a pathway for proton transfer, but at least addition two promoted molecules, ZO(H₃O⁺)H₂O(H₂O)₂, must be involved for complete proton transfer from zeolite to H₂O. The results show that the hydronium ion in water cluster adsorbed on zeolite, ZO(H₃O⁺)(H₂O)₃, can considerably affect the structure and bonding of the hydrogen-bonded dimer of water. The OO distance is contracted from 2.818 Å found in the neutral complex, ZOH(H₂O)₄, to 2.777 Å for ion-pair complex, ZO(H₃O⁺)(H₂O)₃. The distance between the oxygen of the hydronium ion and the zeolitic acid site oxygen is predicted to be 2.480 Å which is in good agreement with the experimentally observed value of 2.510 Å. The corresponding density functional adsorption energy of the high coverages of adsorbing molecules on zeolite is calculated to be −9.14 kcal/mol per molecule at B3LYP/6-311+G(d,p) level of theory and compares well with the experimental observation of −8.20 kcal/mol.     

Ab initio and post-ab initio quantum chemical study of the heme spin states in electron transfer reactions

Quantum-chemical calculations of neutral and charged ironporphyrin (FeP, FeP⁺¹ and FeP⁻) systems were performed using B3LYP and MP2 methods. It was shown that all ground states of FeP (S = 1), FeP⁺¹ (S = 3/2) and FeP⁻ (S = 1/2) systems have C_2v symmetry. During the first step of electron transfer process an electron goes to β-LUMO − 1 Fe d_yz-orbital of FeP⁺¹. The second electron goes to β-LUMO of FeP which is attributed to π-system of porphyrin ring. The 3s- and 3p-orbitals do not play a significant role in the electron transfer process. The ability of FeP⁻¹ system to form π-dative chemical bond is low. The formation of π–π-complexes is preferable.     

Use of CdSe/ZnS core-shell quantum dots as energy transfer donors in sensing glucose

In the present work, CdSe/ZnS core-shell quantum dots were synthesized and conjugated with enzymes, glucose oxidase (GOD) and horseradish peroxidase (HRP). The complex of enzyme-conjugated QDs was used as QD-FRET-based probes to sense glucose. The QDs were used as an electron donor, whereas GOD and HRP were used as acceptors for the oxidation/reduction reactions involved in oxidizing glucose to gluconic acid. Electron transfer between the redox enzymes and the electrochemical reduction of H₂O₂ (or O₂) occurred rapidly, resulting in an increase of the turnover rate of the electron exchange between the substrates (e.g. glucose, H₂O₂ and O₂) and the enzymes (GOD, HRP), as well as between the QDs and the enzymes. The transfer of non-radiative energy from the QDs to the enzymes resulted in the fluorescence quenching of the QDs, corresponding to the increase in the concentration of glucose. The linear detection ranges of glucose concentrations were 0–5.0 g/l (R = 0.992) for the volume ratios of 10/5/5, 0.2–5.0 g/l (R = 0.985) for the volume ratios of 10/5/3 and 1.0–5.0 g/l (R = 0.982) for the volume ratios of 10/5/0. Temperature (29–37 °C), pH (6–10) and some ions (NH₄⁺, NO₃⁻, Na⁺, Cl⁻) had no interference effect on the glucose measurement.     

Thermal and spectroscopic investigation of europium and samarium sulphates hydrates by TG-FTIR and ICP-MS techniques

The investigation of europium(III) sulphate hydrate and samarium(III) sulphate hydrate was performed by thermal analysis (TG-DTG) and simultaneous infrared evolved gas analysis-Fourier transformed infrared (EGA-FTIR) spectroscopy. The TG, DTG and DTA curves were recorded at the 25–1400 °C in the dynamic air atmosphere by TG/DTA analyser. The infrared evolved gas analysis was obtained on the FTIR spectrometer. Eu₂(SO₄)₃·nH₂O (n = 3.97) and Sm₂(SO₄)₃·nH₂O (n = 8.11) were analysed, the dehydration and decomposition steps were investigated and the water content was calculated. The formation of different oxysulphates was studied.

The trace rare earth elements in Eu and Sm sulphates were determined by ICP-MS. The concentration of trace Eu, Sm, La, Gd, Y and Ce ranged from 3.9 × 10⁻⁶ to 1.5 × 10⁻⁴% (m/m).     

The efficacy of nitrosonaphthol functionalized XAD-16 resin for the preconcentration/sorption of Ni(II) and Cu(II) ions

Amberlite XAD-16 resin has been functionalized using nitrosonaphthol as a ligand and characterized employing elemental, thermogravimetric analysis and FT-IR spectroscopy. The sorption of Ni(II) and Cu(II) ions onto this functionalized resin is investigated and optimized with respect to the sorptive medium (pH), shaking speed and equilibration time between liquid and solid phases. The monitoring of the influence of diverse ions on the sorption of metal ions has revealed that phosphate, bicarbonate and citrate reduce the sorption up to 10–14%. The sorption data followed Langmuir, Freundlich, and Dubinin–Radushkevich (D–R) isotherms. The Freundlich parameters computed are 1/n = 0.56 ± 0.03 and 0.49 ± 0.05, A = 9.54 ± 1.5 and 6.0 ± 0.5 mmol g⁻¹ for Ni(II) and Cu(II) ions, respectively. D–R isotherm yields the values of X_m = 0.87 ± 0.07 and 0.35 ± 0.05 mmol g⁻¹ and of E = 9.5 ± 0.23 and 12.3 ± 0.6 kJ mol⁻¹ for Ni(II) and Cu(II) ions, respectively. Langmuir characteristic constants estimated are Q = 0.082 ± 0.005 and 0.063 ± 0.003 mmol g⁻¹, b = (4.7 ± 0.2) × 10⁴ and (7.31 ± 0.11) × 10⁴ l mol⁻¹ for Ni(II) and Cu(II) ions, respectively. The variation of sorption with temperature gives thermodynamic quantities of ΔH = −58.9 ± 0.12 and −40.38 ± 0.11 kJ mol⁻¹, ΔS = −183 ± 10 and −130 ± 8 J mol⁻¹ K⁻¹ and ΔG = −4.4 ± 0.09 and −2.06 ± 0.08 kJ mol⁻¹ at 298 K for Ni(II) and Cu(II) ions, respectively. Using kinetic equations, values of intraparticle transport and of first order rate constant have been computed for both the metal ions. The sorption procedure is utilized to preconcentrate these ions prior to their determination in tea, vegetable oil, hydrogenated oil (ghee) and palm oil by atomic absorption spectrometry using direct and standard addition methods.