Influence of a holey cladding structure on spectral characteristics of side-polished endlessly single-mode photonic crystal fibers

We experimentally investigate the spectral characteristics of side-polished endlessly single-mode photonic crystal fibers of different polishing depths and radii of curvature that are important to mode field diameter, evanescent coupling, waveguide losses, higher-order mode excitation, and dispersion slopes of photonic crystal fiber components. A polished photonic crystal fiber with a greater polishing depth or a larger radius of curvature shows a more dispersive characteristic. In contrast to conventional single-mode fibers, in photonic crystal fibers the evanescent field is more strongly localized, and the propagating light can be more efficiently guided within the deformed core.     

固体激光器与光纤激光器对光子晶体光纤棒耦合的分析与对比

耦合效率的高低与耦合后光斑的好坏直接影响着光子晶体光纤棒的放大效果,因此需要对种子光的耦合效果进行研究,选择合适的激光器作为种子源。本文对光子晶体光纤棒在固体激光器与光纤激光器两种情况下的耦合效率进行了理论分析;模拟计算了两种激光器情况下耦合效率的变化规律以及对准误差对耦合效率的影响;选择合适的透镜或透镜组,使用两种激光器对光子晶体光纤棒进行了耦合实验;对比两种激光器的耦合效果可知:固体激光器的耦合效率最高只能达到62.4%,而光纤激光器的耦合效率可以达到80%以上;在光纤激光器耦合情况下,对不同功率注入时耦合效率,以及耦合后光斑进行了实验分析。得到的实验结果对后续光纤棒的放大实验具有指导作用。     

基于游标效应的双芯光子晶体光纤温度传感器

设计了一种基于双芯光纤耦合效应和游标效应的高灵敏度温度传感器,传感器是由2个相差一定长度的双芯光子晶体光纤和单模光纤级联构成。双芯光子晶体光纤通过级联实现游标效应,同时对纤芯中间的气孔填充乙醇实现温度传感。仿真结果表明,该温度传感器在35℃～45℃范围内的平均温度灵敏度可达-20.37 nm/℃。与单纯依靠双芯光子晶体光纤能量耦合效应的传感器相比,该传感器的温度检测灵敏度提高了10倍。     

光子晶体光纤色散的无量纲化计算方法

关键词：     

光子晶体光纤中基于受激布里渊散射实现快光的数值模拟研究

为了了解基于光纤受激布里渊散射快光传输系统的一些外在因素对受激布里渊散射快光传输的影响,对该传输过程进行了研究。首先,根据受激布里渊散射过程的"三波耦合方程"进行了理论改进,然后选定了3种光子晶体光纤作为传输介质,通过对比,选出一种光子晶体光纤RB65进行具体分析研究。通过求解"三波耦合方程",对快光受激布里渊散射过程进行了模拟分析,探讨了光纤长度、探测信号脉冲宽度和输入信号功率对传输的影响。结果表明,在保证信号失真相对较小的情况下,取40 m长度光纤、140 ns信号脉宽和174 m W输入信号功率时的快光提前效率最高。     

Grating-assisted coupling of optical fibers and photonic crystal waveguides

We propose and analyze a highly efficient method of coupling light from optical fibers to two-dimensional photonic crystal waveguides. Efficient coupling is achieved by positioning of a tapered fiber parallel to the linear defect, where the photonic crystal's cladding functions as a grating coupler and provides field confinement as well. Numerical simulations indicate that better than 90% transmission is possible with a full width at half-magnitude bandwidth of 12nm. It is shown that one can increase the bandwidth by increasing the field overlap between the two waveguides.     

Design of two kinds of dual-core high birefringence and high coupling degree photonic crystal fibers

We propose two kinds of dual-core high birefringence and high coupling degree photonic crystal fibers (DHBHCD-PCFs) in this paper. The characteristics of birefringence and coupling are studied by multipole method. Numerical results show that the birefringence and the coupling length reach an order of 10^− 2 and 10^− 5 m at 1.55 μm, respectively. It is found that the birefringence and the coupling intensity increase with the increase of air-filling fraction, which is different from other dual-core fibers. The DHBHCD-PCFs with high degree of polarization-maintaining and high coupling degree are helpful for manufacturing minitype photonic apparatus.     

Numerical Analysis of Highly Birefringent Photonic Crystal Fibers with Bragg Reflectors

We analyze theoretically the coupling properties of Bragg gratings written in highly birefringent photonic crystal fibers with doped core and show how they can be tuned by the parameters of a microstructured fiber. We apply the coupled mode theory combined with a fully vectorial mode solver based on the plane-wave method. The results indicate large differences in interaction with the grating for the two linearly polarized fundamental modes. We show fiber designs, which provide single-mode operation with high birefringence and at the same time a high coupling efficiency of the grating. Such features can be used in fiber sensors, fiber laser configurations or to introduce a polarization dependent feedback in a long external cavity system with a semiconductor laser.     

光子晶体波导定向耦合器

在完整二维光子晶体中引入线缺陷后，就形成了光子晶体波导；将时域有限差分方法(FDTD)用于光子晶体波导耦合研究，计算了不同耦合长度情形下的波导各个出口处的透过率，结果表明：光子晶体波导耦合遵循普通介质波导耦合的一般规律，也有定向耦合的功能。进一步的研究表明：对于不同的频率，光子晶体定向耦合器耦合系数是不同的，并且耦合系数和对应的频率之间近似直线关系。     

不同零色散点光子晶体光纤的超连续谱产生

本文实验研究了飞秒脉冲在不同零色散点光子晶体光纤中传输时产生超连续谱的现象。首先,我们通过非线性薛定谔方程理论计算了激光脉冲分别在正、负色散光子晶体光纤中传输时产生的超连续谱;计算结果表明在正色散光子晶体光纤产生的超连续谱远远大于在负色散中产生的超连续谱。其次,在实验上采用零色散点分别为800 nm、1 060 nm和2 000 nm的光子晶体光纤,将脉宽为130 fs,中心波长800 nm,脉冲重复频率为80 MHz的脉冲输入这些光纤中产生超连续谱并研究其特性,实验结果表明光子晶体光纤的零色散点越小,在其中产生的超连续谱越宽越平坦。同时产生的超连续谱也与激光脉冲的能量和中心波长相关。     

一种新型的多包层光子晶体光纤的分析方法

传统有效折射率方法只能模拟具有相同空气孔大小的单包层光子晶体光纤.针对这一问题,提出了一种改进的有效折射率法,能够计算具有不同孔径的多包层光子晶体光纤的传输特性.并用此方法对三包层光子晶体光纤的基模有效折射率和色散等特性进行了数值模拟,结果与多极法模拟出的结果符合得很好.这种改进的有效折射率法拓展了传统有效折射率法的适用范围,对快速准确地分析和设计具有不同传输特性的多包层光子晶体光纤提供了理论依据. 关键词： 光子晶体光纤 多包层 有效折射率方法 色散     

Tunable highly birefringent solid-core photonic liquid crystal fibers

Experimental results of temperature-, electric field-, and hydrostatic-pressure-induced effects in solid-core highly birefringent photonic liquid crystal fibers are presented. Selective infiltration of the photonic crystal fibers with liquid crystals was found to induce birefringence axes switching resulting in a variety of tunable photonic liquid crystal fibers-based devices.     

Challenges and Solutions in Fabrication of Silica-Based Photonic Crystal Fibers: An Experimental Study

Abstract

The fabrication process of photonic crystal fibers based on a stack-and-draw method is presented in full detail in this article. In addition, improved techniques of photonic crystal fiber preform preparation and fabrication are highlighted. A new method of connecting a handle to a preform using only a fiber drawing tower is demonstrated, which eliminates the need for a high-temperature glass working lathe. Also, a new technique of modifying the photonic crystal fiber structural pattern by sealing air holes of the photonic crystal fiber cane is presented. Using the proposed methods, several types of photonic crystal fibers are fabricated, which suggests potential for rapid photonic crystal fibers fabrication in laboratories equipped with and limited to only a fiber drawing tower.     

双芯高双折射光子晶体光纤耦合特性研究

设计了一种双芯高双折射光子晶体光纤,采用多极法（multipole method）和光纤的模式耦合理论研究了光纤的双折射、耦合长度以及色散特性.数值研究发现,对于空气孔节距 Λ=1.2　μm,空气孔直径d=1.0　μm的光纤,在1.55　μm处双折射度为1.24×10^-2;对应x偏振模的耦合长度为21.6　μm,对应y偏振模的耦合长度为24.3　μm. 这种具有高保偏度和极短耦合长度的双芯光子晶体光纤对于微型光子器件的研制具有重 关键词： 光子晶体光纤 双芯 双折射 耦合长度     

光子晶体光纤中自相位调制效应对超高斯脉冲传输的影响

为了研究光子晶体光纤的微结构对其非线性光传输特性的影响,利用超格子法和光子晶体光纤中的光传输方程,计算了光子晶体光纤中的高斯光脉冲和超高斯脉冲的自相位调制谱.计算结果表明：高斯光脉冲和超高斯光脉冲的高频端比低频端均有较大的频谱展宽,而高斯光脉冲的频谱比超高斯光脉冲的频谱具有更大的中心峰值;超高斯光脉冲较高斯光脉冲有较广的频谱范围,它们的自相位调制展宽范围均随着传输距离的增加而增大.这些现象均可以利用自陡峭效应的理论加以解释.与传统光纤相比,高斯光脉冲在传统光纤中所受自相位调制效应的影响较小.     

超短光脉冲在双折射光子晶体光纤中产生超连续谱的偏振特性数值分析

采用矢量耦合非线性薛定谔方程描述了超短光脉冲在双折射光子晶体光纤中的传输过程,并利用分步傅里叶方法求解该方程。数值模拟了中心波长为1550nm的超短光脉冲在不同色散参量的双折射光子晶体光纤中超连续谱的产生及其偏振特性。分析了光纤在不同色散区时,高阶色散和非线性效应对超连续谱及其偏振态的影响。结果表明,当超短光脉冲波长位于近光纤零色散点的反常色散区时,比其在光纤正常色散区和远离光纤零色散点的反常色散区更容易产生宽且平坦的超连续谱,所得到的光谱显示出了复杂的偏振态特性。     

Different supercontinuum generation processes in photonic crystal fibers pumped with a 1064-nm picosecond pulse

Picosecond pulse pumped supercontinuum generation in photonic crystal fiber is investigated by performing a series of comparative experiments. The main purpose is to investigate the supercontinuum generation processes excited by a given pump source through the experimental study of some specific fibers. A 20-W all-fiber picosecond master oscillator-power amplifier （MOPA） laser is used to pump three different kinds of photonic crystal fibers for supercontinuum generation. Three diverse supercontinuum formation processes are observed to correspond to photonie crystal fibers with distinct dis- persion properties. The experimental results are consistent with the relevant theoretical results. Based on the above analyses, a watt-level broadband white light supercontinuum source spanning from 500 nm to beyond 1700 nm is demonstrated by using a picosecond fiber laser in combination with the matched photonic crystal fiber. The limitation of the group velocity matching curve of the photonic crystal fiber is also discussed in the paper.     

Coupling and decoupling of dual-core photonic bandgap fibers

Coupling characteristics of dual-core photonic bandgap fibers with triangular photonic crystal cladding are investigated by use of a vector plane-wave expansion method and a vector finite-element method. We demonstrate the eigenmodes and the coupling length for two orthogonal polarizations. A decoupling phenomenon is found at a certain wavelength in this fiber configuration. The decoupling effect is attributed to the effect of surface modes on the eigenmodes. The decoupling wavelength decreases as the ratio of core radius to cladding air-hole pitch increases from 1.05 to 1.15.     

Guiding Properties of a Tapered Photonic Crystal Fiber Compared with Those of a Tapered Single-Mode Fiber

We have fabricated tapered photonic crystal fibers using a fusion splicer and experimentally observed the near-field mode distribution and the beam divergence of it. We have also compared characteristics of the tapered photonic crystal fiber with those of a tapered standard single-mode fiber. Unlike a tapered standard single-mode fiber, the mode field profile of a tapered photonic crystal fiber shows a good confinement of its field within the core region. The numerical apertures of tapered photonic crystal fibers are increased as the diameter of the fiber is decreased.     

Guiding Properties of a Tapered Photonic Crystal Fiber Compared with Those of a Tapered Single-Mode Fiber

We have fabricated tapered photonic crystal fibers using a fusion splicer and experimentally observed the near-field mode distribution and the beam divergence of it. We have also compared characteristics of the tapered photonic crystal fiber with those of a tapered standard single-mode fiber. Unlike a tapered standard single-mode fiber, the mode field profile of a tapered photonic crystal fiber shows a good confinement of its field within the core region. The numerical apertures of tapered photonic crystal fibers are increased as the diameter of the fiber is decreased.