Cold nuclear matter effects on production: Intrinsic and extrinsic transverse momentum effects

Cold nuclear matter effects on J/ψ production in proton–nucleus and nucleus–nucleus collisions are evaluated taking into account the specific J/ψ-production kinematics at the partonic level, the shadowing of the initial parton distributions and the absorption in the nuclear matter. We consider two different parton processes for the -pair production: one with collinear gluons and a recoiling gluon in the final state and the other with initial gluons carrying intrinsic transverse momentum. Our results are compared to RHIC observables. The smaller values of the nuclear modification factor R_AA in the forward rapidity region (with respect to the mid rapidity region) are partially explained, therefore potentially reducing the need for recombination effects.     

Effect of the -function potential on the electron transport in a magnetic nanostructure

In this paper, the spin-dependent electron transport is studied in detail in a magnetic nanostructure with a δ-function potential. It is shown that the large spin-polarization can be achieved in such a device, and the degree of the spin-polarization strongly depends on the height of the δ-function potential. It is also shown that the conductance-polarization apparently has the bigger oscillatory magnitudes with the height of δ-function potential increasing. These interesting features will be more helpful for developing new types of devices.     

Effect of the -doping on the electron transport in a structure modulated by the magnetic barriers

The effect of the δ-doping on the electron transport has been theoretically studied in a structure modulated by the magnetic barriers. The results show that the transmission probability and the electron conductance can be dramatically suppressed by the weight of the δ-doping. However, the spin-injection efficiencies are obviously enhanced. In addition, the transmission probability and the spin-polarization both show a periodic profile with the increase of L₂. These interesting features will be more helpful for developing new types of devices.     

The scattering matrix for size distributions of irregular particles: An application to an olivine sample

We have compared simulated and measured scattering matrices of a size distribution of olivine particles at wavelengths of 633 and 442 nm. The computations were carried out for size distributions of irregularly-shaped compact particles with different average projected areas using the discrete-dipole approximation (DDA). The results of the comparison show that the model of irregularly-shaped particles mimic the observations far better than the results given by spheres, spheroids or rectangular prisms having a wide range in aspect ratios. The computed scattering matrices for size distributions of irregularly-shaped particles do not depend very strongly on the precise particle shape assumed, providing a method to infer certain physical properties of an ensemble of natural dust particles, such as the refractive index, when some information on the sample, as the size distribution, is known a priori.     

Fabrication of polyaniline/ heterojunction structure using plasma enhanced polymerization technique

The work reports on the fabrication of a p–n heterojunction structure comprised of polyaniline (PANI) and TiO₂ nanoparticles. PANI was deposited by plasma enhanced polymerization on TiO₂ thin film substrates. The structural and the crystalline properties demonstrated the coherence and the substantive interaction of the plasma polymerized PANI molecules with the TiO₂ nanoparticle thin film. The UV–Vis studies of PANI/TiO₂ thin film supported the internalization of PANI with TiO₂ nanoparticles due to π–π^* transition of the phenyl rings with the lone pair electrons () of the nitrogen atom present in the PANI molecules. The I–V characteristics of the PANI/TiO₂ heterojunction structure were obtained in the forward and the reverse biased at applied voltage ranging from −1 V to +1 V with a scan rate of 2 mV/s. The proficient current in the PANI/TiO₂ heterojunction structure was attributed to the well penetration of PANI molecules into the pores of the TiO₂ nanoparticle thin film. The I–V characteristics ensured an efficient charge movement at the junction of PANI/TiO₂ interface and thus, behaved as a typical ohmic system.     

Optical properties and g factors of GaAs quantum rods

The Hamiltonian of the zinc-blende quantum rods in the framework of eight-band effective-mass approximation in the presence of external homogeneous magnetic field is given. The electronic structure, optical properties and electron g factors of GaAs quantum rods are investigated. We found that the electron g factors are very sensitively dependent on the dimensions of the quantum rods. As some of the three dimensions increase, the electron g factors decrease. The more the dimensions increase, the more the electron g factors decrease. The dimensions perpendicular to the direction of the magnetic field affect the electron g factors more than the other dimension.     

Spectral flow invariants and twisted cyclic theory for the Haar state on

In [A.L. Carey, J. Phillips, A. Rennie, Twisted cyclic theory and an index theory for the gauge invariant KMS state on Cuntz algebras. arXiv:0801.4605], we presented a K-theoretic approach to finding invariants of algebras with no non-trivial traces. This paper presents a new example that is more typical of the generic situation. This is the case of an algebra that admits only non-faithful traces, namely SU_q(2) and also KMS states. Our main results are index theorems (which calculate spectral flow), one using ordinary cyclic cohomology and the other using twisted cyclic cohomology, where the twisting comes from the generator of the modular group of the Haar state. In contrast to the Cuntz algebras studied in [A.L. Carey, J. Phillips, A. Rennie, Twisted cyclic theory and an index theory for the gauge invariant KMS state on Cuntz algebras. arXiv:0801.4605], the computations are considerably more complex and interesting, because there are non-trivial ‘eta’ contributions to this index.     

Hypernuclear physics legacy and heritage of Dick Dalitz

The major contributions of Richard H. Dalitz to hypernuclear physics, since his first paper in 1955 to his last one in 2005 covering a span of 50 years during which he founded and led the theoretical study of hypernuclei, are reviewed from a personal perspective. Topical remarks on the search for quasi-bound -nuclear states and on kaon condensation are made.     

Valence bands spin splitting in GaAs/AlGaAs quantum wells

A quantitative comparison between different model calculations of valence band states in GaAs/AlGaAs heterostructures is presented. We demonstrate that a 14-band k.p Hamiltonian using a completely new parameterization based on fits of the tight-binding band structure leads to energy dispersion relations in excellent agreement with experiment, whereas previous parameterizations result in significant deviations. The relevance of the present results to the calculation of spin-related phenomena is discussed.     

Phase transitions in the quantum Hall liquid in a quantum wire

Two scenarios for the collapse of the ν=1 quantum Hall liquid (QHL) state, with the effective quantum wire (QW) width defined by the Fermi vector k_F, are studied. Here, ν for the QW is defined as the filling factor of Landau levels (LL) at the center of the QW. In the first one there is no electron redistribution at critical magnetic field , where the Fermi energy, E_F, coincides with the bottom of the empty upper spin-split LL. For the ν=1 state is unstable due to exchange-correlation effects and lateral confinement. In the second scenario, a transition to the ν=2 state occurs, with much smaller width, at . The latter scenario is analyzed in the Hartree–Fock approximation (HFA). Here the Hartree contribution to the total energy affects drastically due to strong electron redistribution in the QW. In both scenarios, the exchange-enhanced g-factor is suppressed at B_cr. The critical fields, activation energy, and optical g-factor obtained in the first scenario are very close to the measured ones.     

Second-order eikonal corrections for

The first-order eikonal approximation is frequently adopted in interpreting the results of A(e,e^′p) measurements. Glauber calculations, for example, typically adopt the first-order eikonal approximation. We present an extension of the relativistic eikonal approach to A(e,e^′p) which accounts for second-order eikonal corrections. The numerical calculations are performed within the relativistic optical model eikonal approximation. The nuclear transparency results indicate that the effect of the second-order eikonal corrections is rather modest, even at Q²≈0.2 (GeV/c)². The same applies to polarization observables, left–right asymmetries, and differential cross sections at low missing momenta. At high missing momenta, however, the second-order eikonal corrections are significant and bring the calculations in closer agreement with the data and/or the exact results from models adopting partial-wave expansions.     

-Factor tuning of 2D electrons in double-gated Si/SiGe quantum wells

We report on the design and first experiments of Si/SiGe heterostructures that allow gate-operated shifting of a 2D electron gas between two channels with different Landé g-factors. This allows gate-operated moving of electrons in and out of resonance in an electron spin resonance (ESR) experiment, which can act as a building block of a proposed solid-state quantum computer. We use MBE-grown modulation-doped quantum-wells (QWs) on SiGe pseudosubstrates with up to 30% Ge and low-temperature electron mobilities up to . A double QW structure with two different Ge contents separated by a thin barrier was optimized for this purpose with self-consistent simulations. The band structure simulations show that by applying gate voltages one can completely shift the wave function from one well to the other. First experiments on pure Si channels show the working of the gate setup. Both carrier density and mobility can be increased by using the back gate which corresponds to shifting the wave function in the channel.     

Self-similarity of electrostatic fluctuations in a linear magnetised plasma system

In this Letter the long-range time correlations present in the fluctuation data in presence of electrostatic instability in a magnetised dc discharge plasma is presented. The electrostatic instability is generated due to the effect of crossed electric and magnetic field (E×B flow) and has intermediate frequency ranging from 50 to 100 MHz. Hurst exponent, the self-similarity parameter is calculated with the help of different statistical methods suggested by many researchers to determine the long-range time correlation present in fluctuation dynamics in the plasma column. The fluctuation in the ion saturation current is measured by a Langmuir probe for the study and the measurement is done both radially and axially in the plasma system. Estimated results clearly expose the self-similar character of the fluctuations with self-similarity parameters having values from 0.65 to 0.90 through the presence of long-range time correlation.     

The effect on the annealing temperature of Li doped ZnO thin film for a film bulk acoustic resonator

We investigated the material and electrical properties of Li doped ZnO thin film (ZLO) with variation of the annealing temperature. In the 500 C sample, ZLO film showed well defined (002) c-axis orientation and a full width half-maximum property of 0.25. The electrical properties of ZLO thin films showed the excellent specific resistance of 1.5×10¹¹ Ω cm. Finally, the frequency characteristics of the ZLO thin film FBAR, according to the annealing temperature, showed improvement of the return loss from 24.48 to 30.02 dB at a resonant frequency of 1.17 GHz.     

Contact and phonon scattering effects on quantum transport properties of carbon-nanotube field-effect transistors

We investigated the phonon scattering effects on the transport properties of carbon nanotube devices with micron-order lengths at room temperature, using the time-dependent wave-packet approach based on the Kubo formula within a tight-binding approximation. We studied the scattering effects of both the longitudinal acoustic and the optical phonons on the transport properties. The conductance of semiconducting nanotubes is decreased by the acoustic phonon, instead of the optical phonon. Furthermore, we clarified how the electron mobilities of the devices are affected by the acoustic phonon.     

Interrelation between electronic structure and interatomic distances for compounds

The heat capacity was studied for LaMn₂Si₂, La_0.75Y_0.25Mn₂Si₂, La_0.7Y_0.3Mn₂Si₂, YMn₂Si₂ and LaFe₂Si₂ isostructural intermetallic compounds in the temperature range 1.8–360 K. The electronic, magnetic and lattice contributions to the heat capacity of the compounds were determined and analyzed. The interrelation was found between values of the electronic contribution to the heat capacity (density of states at the Fermi level) and crystal lattice parameters of R(Mn,Fe,Ni)₂Si₂ compounds. The electronic contribution and the density of states at Fermi level increase with increasing lattice parameters of the compounds. The change of interlayer Mn–Mn exchange interactions with change of Y concentration in La_1-xY_xMn₂Si₂ compounds is not accompanied by considerable changes in the electronic contribution to the heat capacity and density of states at the Fermi level. The performed analysis of the magnetic contribution shows that no essential differences exist between the behavior of the heat capacity of the compounds with d_Mn–Mnd_c and with d_Mn–Mn<d_c upon various types of the magnetic phase transitions.     

A novel non-intrusive sampling technique for laser on-line beam monitoring utilising a silicon mirror

The measurement of high speed laser beam parameters during processing is a topic that has seen growing attention over the last few years as quality assurance places greater demand on the monitoring of the manufacturing process. The targets for any monitoring system is to be non-intrusive, low cost, simple to operate, high speed and capable of operation in process. A new ISO compliant system is presented based on the integration of an imaging plate and camera located behind a proprietary mirror sampling device. The general layout of the device is presented along with the thermal and optical performance of the sampling optic. Diagnostic performance of the system is compared with industry standard devices, demonstrating the high quality high speed data which has been generated using this system.