Superhydrophobic films of electrospun fibers with multiple-scale surface morphology

Superhydrophobic nanofiber films were created from electrospun nanofibers with undulated surfaces at multiple scales in micrometers and nanometers. The electrospun nanofibers were produced out of aqueous solutions which contained water-soluble polymers and different colloids: monodisperse silica or polystyrene microspheres for larger particles and monodisperse silica nanoparticles for smaller particles. Various types of fibrous films were produced depending on the properties of the dispersing medium, the effects of additives, and the compositions of the bidisperse colloids. When polystyrene microspheres were used as sacrificial templates, macropores were left behind in the nanofibers during the removal of polystyrene microspheres by calcination. The nonwoven films of electrospun nanofibers, which were decorated with silica microspheres or macropores, could be continuously produced with considerable ease under a relatively wide range of operating conditions. The surface properties of the films were characterized by contact angle measurement and an X-ray photoelectron spectrometer. Through the surface modification of the electrospun nanofibers with fluorinated silane coupling agents, superhydrophobic surfaces with low sliding angles were successfully prepared.     

Control of the water adhesion on hydrophobic micropillars by spray coating technique

We present an alternative approach for controlling the water adhesion on solid superhydrophobic surfaces by varying their coverage with a spray coating technique. In particular, micro-, submicro-, and nanorough surfaces were developed starting from photolithographically tailored SU-8 micropillars that were used as substrates for spraying first poly(tetrafluoroethylene) submicrometer particles and subsequently iron oxide nanoparticles. The sprayed particles serve to induce surface submicrometer and nanoscale roughness, rendering the SU-8 patterns superhydrophobic (apparent contact angle values of more than 150°), and also to tune the water adhesion between extreme states, turning the surfaces from “non-sticky” to “sticky” while preserving their superhydrophobicity. The influence of the chemical properties and of the geometrical characteristics of the functionalized surfaces on the wetting properties is discussed within the frame of the theory. This simple method can find various applications in the fabrication of microfluidic devices, smart surfaces, and biotechnological and antifouling materials.     

Facile method to fabricate raspberry-like particulate films for superhydrophobic surfaces

A facile method using layer-by-layer assembly of silica particles is proposed to prepare raspberry-like particulate films for the fabrication of superhydrophobic surfaces. Silica particles 0.5 microm in diameter were used to prepare a surface with a microscale roughness. Nanosized silica particles were then assembled on the particulate film to construct a finer structure on top of the coarse one. After surface modification with dodecyltrichlorosilane, the advancing and receding contact angles of water on the dual-sized structured surface were 169 and 165 degrees , respectively. The scale ratio of the micro/nano surface structure and the regularity of the particulate films on the superhydrophobic surface performance are discussed.     

Transparent superhydrophobic films based on silica nanoparticles

We demonstrate a layer-by-layer processing scheme that can be utilized to create transparent superhydrophobic films from SiO2 nanoparticles of various sizes. By controlling the placement and level of aggregation of differently sized nanoparticles within the resultant multilayer thin film, it is possible to optimize the level of surface roughness to achieve superhydrophobic behavior with limited light scattering. Transparent superhydrophobic films were created by the sequential adsorption of silica nanoparticles and poly(allylamine hydrochloride). The final assembly was rendered superhydrophobic with silane treatment. Optical transmission levels above 90% throughout most of the visible region of the spectrum were realized in optimized coatings. Advancing water droplet contact angles as high as 160 degrees with low contact angle hysteresis (<10 degrees ) were obtained for the optimized multilayer thin films. Because of the low refractive index of the resultant porous multilayer films, they also exhibited antireflection properties.     

Reversible superhydrophobic to superhydrophilic conversion of Ag@TiO2 composite nanofiber surfaces

A new type of superhydrophobic material consisting of a surface with supported Ag@TiO(2) core-shell nanofibers has been prepared at low temperature by plasma-enhanced chemical vapor deposition (PECVD). The fibers are formed by an inner nanocrystalline silver thread which is covered by a TiO(2) overlayer. Water contact angles depend on the width of the fibers and on their surface concentration, reaching a maximum wetting angle close to 180 degrees for a surface concentration of approximately 15 fibers microm(-2) and a thickness of 200 nm. When irradiated with UV light, these surfaces become superhydrophilic (i.e., 0 degrees contact angle). The decrease rate of the contact angle depends on both the crystalline state of the titania and on the size of the individual TiO(2) domains covering the fibers. To the best of our knowledge, this is one of the few examples existing in the literature where a superhydrophobic surface transforms reversibly into a superhydrophilic one as an effect of light irradiation.     

Nanostructures increase water droplet adhesion on hierarchically rough superhydrophobic surfaces

Hierarchical roughness is known to effectively reduce the liquid-solid contact area and water droplet adhesion on superhydrophobic surfaces, which can be seen for example in the combination of submicrometer and micrometer scale structures on the lotus leaf. The submicrometer scale fine structures, which are often referred to as nanostructures in the literature, have an important role in the phenomenon of superhydrophobicity and low water droplet adhesion. Although the fine structures are generally termed as nanostructures, their actual dimensions are often at the submicrometer scale of hundreds of nanometers. Here we demonstrate that small nanometric structures can have very different effect on surface wetting compared to the large submicrometer scale structures. Hierarchically rough superhydrophobic TiO(2) nanoparticle surfaces generated by the liquid flame spray (LFS) on board and paper substrates revealed that the nanoscale surface structures have the opposite effect on the droplet adhesion compared to the larger submicrometer and micrometer scale structures. Variation in the hierarchical structure of the nanoparticle surfaces contributed to varying droplet adhesion between the high- and low-adhesive superhydrophobic states. Nanoscale structures did not contribute to superhydrophobicity, and there was no evidence of the formation of the liquid-solid-air composite interface around the nanostructures. Therefore, larger submicrometer and micrometer scale structures were needed to decrease the liquid-solid contact area and to cause the superhydrophobicity. Our study suggests that a drastic wetting transition occurs on superhydrophobic surfaces at the nanometre scale; i.e., the transition between the Cassie-Baxter and Wenzel wetting states will occur as the liquid-solid-air composite interface collapses around nanoscale structures. Consequently, water adheres tightly to the surface by penetrating into the nanostructure. The droplet adhesion mechanism presented in this paper gives valuable insight into a phenomenon of simultaneous superhydrophobicity and high water droplet adhesion and contributes to a more detailed comprehension of superhydrophobicity overall.     

Electrospun poly(styrene-block-dimethylsiloxane) block copolymer fibers exhibiting superhydrophobicity

Block copolymer poly(styrene-b-dimethylsiloxane) fibers with submicrometer diameters in the range 150-400 nm were produced by electrospinning from solution in tetrahydrofuran and dimethylformamide. Contact angle measurements indicate that the nonwoven fibrous mats are superhydrophobic, with a contact angle of 163 degrees and contact angle hysteresis of 15 degrees . The superhydrophobicity is attributed to the combined effects of surface enrichment in siloxane as revealed by X-ray photoelectron spectroscopy and surface roughness of the electrospun mat itself. Additionally, the fibers are shown by transmission electron microscopy to exhibit microphase-separated internal structures. Calorimetric studies confirm the strong segregation between the polystyrene and poly(dimethylsiloxane) blocks.     

Designing magnetic and superhydrophobic cellulose nanofibers based-aerogel for efficient oil water separation

In this work, we used cellulose nanofibers (CNF) as the skeleton, Fe₃O₄@ZnO composite particles as magnetic synergist particles, 3-(2-aminoethylamino) propyltrimethoxysilane (AS) and trimethoxy(octyl)silane (OTMS) as water-based hydrophobic modifiers to prepare magnetic and superhydrophobic cellulose nanofibers based-aerogel with low density and intricate three-dimensional structure. Fe₃O₄@ZnO confers magnetic properties (3.82 emu/g) and exceptional thermal stability (water contact angle of 150.1° at 200 °C) to the system, while the combination with OTMS/AS endows the system superhydrophobic (157.5°) and excellent mechanical properties (stress of 96.95 kPa at 80% strain). It is worth noting that in the process of modifying the system with OTMS/AS, no organic solvents and acidic substances are used in the solution. Benefiting from their synergies, the system demonstrates a notable oil absorption capacity (12.31–41.91 g/g) and outstanding oil selectivity (exceeding 90%), driven by gravity alone. Interestingly, this system, marked by its cost-effectiveness, simplicity, eco-friendliness, and heightened efficiency, holds promising prospects for diverse applications in different oil–water separation behavior and purifying industrial oil wastewater, as well as oil flooding incidents.     

Hydrothermal treatment of nanoparticle thin films for enhanced mechanical durability

The mechanical durability of nanoporous all-nanoparticle and polymer-nanoparticle layer-by-layer (LbL) films (80-150 nm thick) on both glass and polycarbonate substrates has been greatly enhanced by hydrothermal treatment (124-134 degrees C). Polymer-nanoparticle films were more durable than all-nanoparticle films after hydrothermal treatment. The optical properties of nanoporous antireflection (AR) films were exploited in an abrasion test (25-100 kPa normal stress) to quantify the extent of abrasive wear observed qualitatively by scanning electron microscopy (SEM). Marginal damage was observed under optimal reinforcement conditions. Untreated films not only delaminated from the surface completely but also damaged their underlying glass and polycarbonate substrates during testing. The nature of the substrate was found to play an important role in determining abrasion resistance, regardless of the level of particle fusion in the film. The low-temperature process enables in situ mechanical reinforcement of otherwise delicate nanoparticle assemblies on plastic substrates. Tribochemical wear was found to planarize the nanoscale surface texture of these films, similar to what is observed in chemo-mechanical polishing (CMP). This finding is useful for anyone trying to make robust superhydrophobic or superhydrophilic coatings. To our knowledge, this is the first report on hydrothermal reinforcement of LbL films.     

Superhydrophilic and superhydrophobic nanostructured surfaces via plasma treatment

Polyethylene terephthalate (PET) films have been structured with isolated nanofibrils and fibril bundles using oxidative plasma treatments with increasing etching ratios. The transition from fibrils to bundles was smooth and it was associated with a significant reduction in the overall top area fraction and with the development of a second organisation level at a larger length scale. This increased complexity was reflected in the surface properties. The surfaces with two-level substructures showed superhydrophilic and superhydrophobic properties depending on the surface chemistry. These properties were preserved during prolonged storage and resisted moderate mechanical stress. By combining different contact angle and drop impact measurements, the optimum surface design and plasma processing parameters for maximizing stability of the superhydrophobic or superhydrophilic properties of the PET films were identified.     

Superhydrophobic polyimide films with a hierarchical topography: combined replica molding and layer-by-layer assembly

Artificial superhydrophobic surfaces with a hierarchical topography were fabricated by using layer-by-layer assembly of polyelectrolytes and silica nanoparticles on microsphere-patterned polyimide precursor substrates followed with thermal and fluoroalkylsilane treatment. In this special hierarchical topography, micrometer-scale structures were provided by replica molding of polyamic acid using two-dimensional arrays of polystyrene latex spheres as templates, and nanosized silica particles were then assembled on these microspheres to construct finer structures at the nanoscale. Heat treatment was conducted to induce chemical cross-linking between polyelectrolytes and simultaneously convert polyamic acid to polyimide. After surface modification with fluoroalkylsilane, the as-prepared highly hydrophilic surface was endowed with superhydrophobicity due to the bioinspired combination of low surface energy materials and hierarchical surface structures. A superhydrophobic surface with a static water contact angle of 160 degrees and sliding angle of less than 10 degrees was obtained. Notably, the polyimide microspheres were integrated with the substrate and were mechanically stable. In addition, the chemical and mechanical stability of the polyelectrolyte/silica nanoparticle multilayers could be increased by heat-induced cross-linking between polyelectrolytes to form nylon-like films, as well as the formation of interfacial chemical bonds.     

Superhydrophobic and lipophobic properties of self-organized honeycomb and pincushion structures

This report describes the simple preparation of superhydrophobic and lipophobic surfaces by self-organization. Microporous polymer films of a fluorinated polymer with hexagonally arranged pores were prepared by casting from solution under humid conditions. Hexagonally packed water microdroplets were formed by evaporative cooling on the surface of the casting solution. After solvent evaporation, a honeycomb-patterned polymer film was formed with the water droplet array acting as a template; the water droplets themselves evaporated soon after the solvent. Two porous polymer layers were stacked vertically, separated by pillars at the hexagon vertexes. After peeling off the top layer using adhesive tape, a pincushion-like structure was obtained. Here, we show that superhydrophobic behavior was achieved, with the maximum contact angle, 170 degrees, observed using these pincushion structures. Theoretical calculations fit the experimental results well. The lipophobic properties of the films are also discussed.     

Surface modification of natural cellulose substances:toward functional materials and applications

Combining various synthetic chemical processes and biological assemblies provides a promising strategy for the design and fabrication of functional materials with tailored structures and properties.The unique multilevel structures and morphologies of natural cellulose substances such as ordinary commercial laboratory filter paper make them ideal platforms for the self-assemblies of various functional guest molecules that are to be deposited on the surfaces of their fine structures,and the resulting composite matters show significant potentials for various applications.The surface sol-gel process was employed to deposit ultrathin metal-oxide(e.g.,titania and zirconia)gel films to coat the cellulose nanofibers in bulk filter papers;thereafter,monolayers of specific guest substrates were immobilized onto the surfaces of the metal-oxide gel films.Highly selective,sensitive,and reversible chemosensors based on the surface modification of filter paper were obtained toward the fluorescence and colorimetric detection of various analytes such as heavy-metal ions,inorganic anions,amino acids,and gases.Cellulosebased composite materials with superhydrophobic,antibacterial,or luminescent properties were fabricated by self-assembly approaches toward practical applications.     

CaCO_3颗粒模板法制备聚合物超亲水/超疏水表面

以碳酸钙(CaCO3)颗粒层为模板,运用简单的热压和酸蚀刻相结合的方法制备聚合物超亲水/超疏水表面.首先在玻璃基底上均匀铺撒一层CaCO3颗粒,以此作为模板,通过热压线性低密度聚乙烯(LLDPE)使CaCO3颗粒均匀镶嵌在聚合物表面,获得了超亲水性质;进一步经酸蚀得到了具有微米和亚微米多孔结构的表面,其水滴静态接触角(WCA)可达(152.7±0.8)°,滚动角小于3°,具备超疏水性质.表面浸润性能和耐水压冲击性能研究表明该超疏水表面具有良好的稳定性和持久性.用同样工艺微模塑/酸蚀刻其它疏水性聚合物,得到类似结果.     

Reversible electrowetting of vertically aligned superhydrophobic carbon nanofibers

Reversible electrostatically induced wetting (electrowetting) of vertically aligned superhydrophobic carbon nanofibers has been investigated. Carbon nanofibers on a 5 x 5 microm pitch were grown on Si substrates, electrically insulated with a conformal dielectric, and hydrophobized with fluoropolymer. This nanostructured scaffold exhibited superhydrophobic behavior for saline (theta approximately 160 degrees). Electrowetting induced a contact angle reduction to theta approximately 100 degrees. Competitive two-liquid (dodecane/saline) electrowetting exhibited reversibility on the same nanostructured scaffold. Without applied bias, ultra-fine-point tip (approximately 25 nm radius) nanofibers result in effectively zero capacitance with the overlying saline layer. Complete electrowetting of the substrate is confirmed as capacitance values increase by several orders of magnitude with increased wetting. These results demonstrate the applicability of reversible electrowetting on nanostructured scaffolds and use of nanofabricated structures that can be integrated with various micro- and nanoelectronic technologies.     

Line tension action on 2D networks of gold nanoparticles obtained by the Bubble Deposition Method

The self-assembling properties of surfactant black films are used to obtain sizeable, dense islands of nanoparticles. Using the "Bubble Deposition Method" (BDM) these films are transferred onto solid substrates. The organisation within the islands evolves when the films are allowed to equilibrate before deposition. The results on model gold particles are discussed in terms of line tension.     

Fabrication of CdS films with superhydrophobicity by the microwave assisted chemical bath deposition

A simple method of microwave assisted chemical bath deposition (MA-CBD) was adopted to fabricate cadmium sulfide (CdS) thin films. The superhydrophobic surface with a water contact angle (CA) of 151 degrees was obtained. Via a scanning electron microscopy (SEM) observation, the film was proved having a porous micro/nano-binary structure which can change the property of the surface and highly enhance the hydrophobicity of the film. A possible mechanism was suggested to describe the growth of the porous structure, in which the microwave heating takes an important role in the formation of two distinct characteristic dimensions of CdS precipitates, the growth of CdS sheets in micro-scale and sphere particles in nano-scale. The superhydrophobic films may provide novel platforms for photovoltaic, sensor, microfluidic and other device applications.     

Electrochemistry of conductive polymers 39. Contacts between conducting polymers and noble metal nanoparticles studied by current-sensing atomic force microscopy

Electrical properties of contacts formed between conducting polymers and noble metal nanoparticles have been examined using current-sensing atomic force microscopy (CS-AFM). Contacts formed between electrochemically prepared pi-conjugated polymer films such as polypyrrole (PPy), poly(3-methylthiophene) (P3MeT), as well as poly(3,4-ethylenedioxythiophene) (PEDOT) and noble metal nanoparticles including platinum (Pt), gold (Au), and silver (Ag) have been examined. The Pt nanoparticles were electrochemically deposited on a pre-coated PPy film surface by reducing a platinum precursor (PtCl62-) at a constant potential. Both current and scanning electron microscopic images of the film showed the presence of Pt islands. The Au and Ag nanoparticles were dispersed on the P3MeT and PEDOT film surfaces simply by dipping the polymer films into colloid solutions containing Au or Ag particles for specified periods (5 to approximately 10 min). The deposition of Au or Ag particles resulted from either their physical adsorption or chemical bonding between particles and the polymer surface depending on the polymer. When compared with PPy, P3MeT and PEDOT showed a stronger binding to Au or Ag nanoparticles when dipped in their colloidal solutions for the same period. This indicates that Au and Ag particles are predominantly linked with the sulfur atoms via chemical bonding. Of the two, PEDOT was more conductive at the sites where the particles are connected to the polymer. It appears that PEDOT has better aligned sulfur atoms on the surface and is strongly bonded to Au and Ag nanoparticles due to their strong affinity to gold and silver. The current-voltage curves obtained at the metal islands demonstrate that the contacts between these metal islands and polymers are ohmic.     

Structure of submonolayer oleic acid coverages on inorganic aerosol particles: evidence of island formation

A series of submonolayer deposition studies of oleic acid on both hydrophobic and hydrophilic surfaces has shown that oleic acid self-associates into islands rather than uniformly covering the surfaces. The studies were performed by vapor deposition on 1.6 mum diameter polystyrene aerosol particles as well as on polystyrene and silica surfaces. The surfaces were investigated by scanning electron microscopy (SEM), atomic force microscopy (AFM), ellipsometry and contact-angle goniometry. After timescales of minutes to hours of vapor deposition at 70 degrees C, the oleic acid arranged itself in the form of islands with diameters of about 100 nm. Many of the islands are 25-30 A high, suggesting that the oleic acid sits vertically on the surface. The surface structure of oleic acid on particles is expected to impact on several atmospherically relevant properties such as the reactivity of the oleic acid and the hygroscopicity of the particles.     

Biomimetic superhydrophobic and highly oleophobic cotton textiles

We report a biomimetic procedure to prepare superhydrophobic cotton textiles. By in situ introducing silica particles to cotton fibers to generate a dual-size surface roughness, followed by hydrophobization with polydimethylsiloxane (PDMS), normally hydrophilic cotton has been easily turned superhydrophobic, which exhibits a static water contact angle of 155 degrees for a 10 microL droplet. The roll-off angle of water droplets depends on the droplet volume, ranging from 7 degrees for a droplet of 50 microL to 20 degrees for a 7 microL droplet. When a perfluoroalkyl chain is introduced to the silica particle surface, the superhydrophobic textile also becomes highly oleophobic, as demonstrated by a static contact angle of 140 degrees and a roll-off angle of 24 degrees for a 15 microL sunflower oil droplet.