Effect of hole-transporting materials on the photovoltaic performance and stability of all-ambient-processed perovskite solar cells

High-efficiency perovskite solar cells(PSCs) reported hitherto have been mostly prepared in a moisture and oxygen-free glove-box atmosphere, which hampers upscaling and real-time performance assessment of this exciting photovoltaic technology. In this work, we have systematically studied the feasibility of allambient-processing of PSCs and evaluated their photovoltaic performance. It has been shown that phasepure crystalline tetragonal MAPbI_3 perovskite films are instantly formed in ambient air at room temperature by a two-step spin coating process, undermining the need for dry atmosphere and post-annealing.All-ambient-processed PSCs with a configuration of FTO/TiO_2/MAPbI_3/Spiro-OMeTAD/Au achieve opencircuit voltage(990 mV) and short-circuit current density(20.31 mA/cm~2) comparable to those of best reported glove-box processed devices. Nevertheless, device power conversion efficiency is still constrained at 5% by the unusually low fill-factor of 0.25. Dark current–voltage characteristics reveal poor conductivity of hole-transporting layer caused by lack of oxidized spiro-OMe TAD species, resulting in high seriesresistance and decreased fill-factor. The study also establishes that the above limitations can be readily overcome by employing an inorganic p-type semiconductor, copper thiocyanate, as ambient-processable hole-transporting layer to yield a fill-factor of 0.54 and a power conversion efficiency of 7.19%. The present findings can have important implications in industrially viable fabrication of large-area PSCs.     

Highly stable perovskite solar cells with a novel Ni-based metal organic complex as dopant-free hole-transporting material

Hole-transporting material(HTM)plays a paramount role in enhancing the photovltaic performance of perovskite solar cells(PSCs).Currently,the vast majority of these HTMs employed in PSCs are organic small molecules and polymers,yet the use of organic metal complexes in PSCs applications remains less explored.To date,most of reported HTMs require additional chemical additives(e.g.Li-TFSI,t-TBP)towards high performance,however,the introduction of additives decrease the PSCs device stability.Herein,an organic metal complex(Ni-TPA)is first developed as a dopant-free HTM applied in PSCs for its facile synthesis and efficient hole extract/transfer ability.Consequently,the dopant-free Ni-TPAbased device achieves a champion efficiency of 17.89%,which is superior to that of pristine Spiro-OMeTAD(14.25%).Furthermore,we introduce a double HTM layer with a graded energy bandgap containing a Ni-TPA layer and a CuSCN layer into PSCs,the non-encapsulated PSCs based on the Ni-TPA/CuSCN layers affords impressive efficiency up to 20.39%and maintains 96%of the initial PCE after 1000 h at a relative humidity around 40%.The results have demonstrated that metal organic complexes represent a great promise for designing new dopant-free HTMs towards highly stable PSCs.     

Transition metal oxides as hole-transporting materials in organic semiconductor and hybrid perovskite based solar cells

Organic polymer solar cells (OSCs) and organic-inorganic hybrid perovskite solar cells (PSCs) have achieved notable progress over the past several years. A central topic in these fields is exploring electronically efficient, stable and effective hole-transporting layer (HTL) materials. The goal is to enhance hole-collection ability, reduce charge recombination, increase built-in voltage, and hence improve the performance as well as the device stability. Transition metal oxides (TMOs) semiconductors such as NiO _x , CuO _x , CrO _x , MoO _x , WO₃, and V₂O₅, have been widely used as HTLs in OSCs. These TMOs are naturally adopted into PSC as HTLs and shows their importance. There are similarities, and also differences in applying TMOs in these two types of main solution processed solar cells. This concise review is on the recent developments of transition metal oxide HTL in OSCs and PSCs. The paper starts from the discussion of the cation valence and electronic structure of the transition metal oxide materials, followed by analyzing the structure-property relationships of these HTLs, which we attempt to give a systematic introduction about the influences of their cation valence, electronic structure, work function and film property on device performance.     

Recent studies on small molecular and polymeric hole-transporting materials for high-performance perovskite solar cells

A decade of significant research has led to the emergence of photovoltaic solar cells based on perovskites that have achieved an exceptionally high-power conversion efficiency of 26.08%. A key breakthrough in perovskite solar cells (PSCs) occurred when solid hole-transporting materials (HTMs) replaced liquid electrolytes in dye-sensitized solar cells (DSSCs), because HTMs play a crucial role in improving photovoltaic performance as well as cell stability. This review is mainly focused on the HTMs that are responsible for hole transport and extraction in PSCs, which is one of the crucial components for efficient devices. Here, we have reviewed small molecular as well as polymeric HTMs that have been reported in the last two years and discussed their performance based on the analysis of their molecular architectures. Finally, we include a perspective on the molecular engineering of new functional HTMs for highly efficient stable PSCs.     

Improving the stability of metal halide perovskite solar cells from material to structure

Metal halide perovskites(MHPs) are promising photovoltaic(PV) materials owing to their advantages such as high carrier mobility, excellent absorption coefficient, bandgap tenability, long diffusion length,and low material cost. These qualities have increased the efficiency of MHP solar cells to 23.3%. However,MHPs are hindered by a lack of stability. In addition, the applications of MHP solar cells are restricted by the instability of perovskite materials and devices. In this article, the most urgent stability problems faced by perovskite solar cells are identified, and recent progresses in MHPs are enumerated. The factors affecting the stability of perovskite materials and devices are also discussed. We analyzed the thermal and humid stability of perovskite materials in terms of transporting materials and their interface. In view of these recent advances, future works should focus on the large-scale application of MHP solar cells.     

Intrinsic thermal stability of inverted perovskite solar cells based on electrochemical deposited PEDOT

Thermal stability of perovskite materials is an issue impairing the long-term operation of inverted perovskite solar cells(PSCs). Herein, the thermal attenuation mechanism of the MAPb I3films that deposited on two different hole transport layers(HTL), poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS) and poly(3,4-ethylenedioxythiophene)(PEDOT), is comprehensively studied by applying a heat treatment at 85 °C. The thermal stress causes the mutual ions migration of I, Pb and Ag t...     

Improved interfacial property by small molecule ethanediamine for high performance inverted planar perovskite solar cells

We report a simple and effective method to realize desirable interfacial property for inverted planar perovskite solar cells(PSCs)by using small molecule ethanediamine for the construction of a novel polyelectrolyte hole transport material(P3CT-ED HTM).It is found that P3CT-ED can not only improve the hole transport property of P3CT-K but also improve the crystallinity of adjacent perovskite film.In addition,the introduction of ethanediamine into P3CT realigns the conduction and valence bands upwards,passivates surface defects and reduces nonradiative recombination.As a consequence,compared to P3CT-K hole transport layer(HTL)based devices,the average power conversion efficiency(PCE)is boosted from17.2% to 19.6% for the counterparts with P3CT-ED,with simultaneous enhancement in open circuit voltage and fill factor.The resultant device displays a champion PCE of 20.5% with negligible hysteresis.     

Enhanced efficiency and stability of perovskite solar cells by 2D perovskite vapor-assisted interface optimization

Organic–inorganic perovskites solar cells(PSCs)have attracted great attention due to their rapid progress in power conversion efficiency(PCE).However,there is still an enormous challenge to achieve both high efficiency and stability devices as the decomposition of perovskite materials under humid and light conditions.Herein,we demonstrate that high efficiency and stability of PSCs can be obtained by the reaction of three-dimensional(3D)perovskite with 1,4-butanediamine iodide(BEAI2)vapor.The incorporation of BEAI2 intensively promotes the crystallization of perovskite film with large grain size(~500 nm).Further characterization reveals that the post-treatment perovskite film delivered low interface trap density with long carrier lifetime(>200 ns),long carrier diffusion length(>600 nm)and large carrier mobility(>1.5 cm^2 V-1S-1).Solar cells employing such post-treatment films demonstrated 19.58%PCE without hysteresis.Moreover,the post-treatment devices can retain over 90%original efficiencies stored under ambient atmospheric conditions and exhibit better stability under 85℃and continuous illumination as a two-dimensional(2D)perovskite thin layer is formed on the surface/or at the grain boundaries of 3D perovskite.This study offers an effective way to obtain PSCs with high efficiency and stability.     

Improved synthesis and stability of 8-selenoquinoline and its sodium salt as organic reagents

The synthesis of 8-selenoquinoline and its sodium salt has been improved by optimization of each process. The stability of the reagents in air and nitrogen has been examined and correlated with the drying method. Both 8-selenoquinoline and its sodium salt can exist as the monohydrate. It was found that the sodium salt of 8-selenoquinoline monohydrate is best as the weighing form of the reagent and that it can be kept stable under nitrogen in a vessel containing silica gel.     

Dependence on material choice of degradation of organic solar cells following exposure to humid air

Electron microscopy has been used to study the degradation of organic solar cells when exposed to humid air. Devices with various different combinations of commonly used organic solar cell hole transport layers and cathode materials have been investigated. In this way the ingress of water and the effect it has on devices could be studied. It was found that calcium and aluminum in the cathode both react with water, causing voids and delamination within the device. The use of poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) was found to increase the degradation by easing water ingress into the device. Replacing these materials removed these degradation features. © 2015 The Authors. Journal of Polymer Science Part B: Polymer Physics published by Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016, 54, 216–224     

多功能氨基酸衍生物钝化的高性能钙钛矿太阳能电池

采用含有羧基、氨基和苯基等多官能团的氨基酸衍生物分子(Fmoc-L-异亮氨酸,Fmoc-Ile-OH)钝化钙钛矿薄膜表面缺陷。首先,该氨基酸衍生物可降低钙钛矿薄膜中PbI₂杂质含量,并提高钙钛矿薄膜的颗粒尺寸。其次,氨基酸衍生物的引入可有效改善钙钛矿薄膜的光学特性和钙钛矿/电荷传输层界面载流子输运性能。另外,经钝化处理的钙钛矿太阳能电池表现出更优的器件二极管理想因子、更低的陷阱填充极限电压和更高的载流子复合电阻,这些结果证实了Fmoc-Ile-OH可有效钝化钙钛矿薄膜表面缺陷。最后,通过工艺条件优化,制得了转化效率为21.09%的高效钙钛矿太阳能电池器件,其性能远优于对照组器件的效率(18.00%)。     

Post-treatment by an ionic tetrabutylammonium hexafluorophosphate for improved efficiency and stability of perovskite solar cells

Interface engineering is an effective way to improve efficiency and long-term stability of perovskite solar cells(PSCs).Herein,an ionic compound tetrabutylammonium hexafluorophosphate(TP6)is adopted to passivate surface defects of the perovskite film.It is found that TP6 effectively reduced the surface defects,especially at the grain boundaries where the defects are abundant.Meanwhile,the exposed long alkyl chains and fluorine atoms in the TP6 enhanced the moisture stability of the perovskite film due to its strong hydrophobicity.In addition,the driving force of charge carrier separation and transport is increased by enlarged built-in potential.Consequently,the power conversion efficiency(PCE)of PSCs is significantly improved from 20.59% to 22.41%by increased open-circuit voltage(V_oc)and fill factor(FF).The unencapsulated device with TP6 treatment exhibits better stability than the control device,and the PCE retains-80%of its initial PCE after 30 days under 15%-25%relative humidity in storage,while the PCE of the control device declines by more than 50%.     

Development of formamidinium lead iodide-based perovskite solar cells: efficiency and stability

Perovskite materials have been particularly eye-catching by virtue of their excellent properties such as high light absorption coefficient, long carrier lifetime, low exciton binding energy and ambipolar transmission (perovskites have the characteristics of transporting both electrons and holes). Limited by the wider band gap (1.55 eV), worse thermal stability and more defect states, the first widely used methylammonium lead iodide has been gradually replaced by formamidinium lead iodide (FAPbI₃) with a narrower band gap of 1.48 eV and better thermal stability. However, FAPbI₃ is stabilized as the yellow non-perovskite active phase at low temperatures, and the required black phase (α-FAPbI₃) can only be obtained at high temperatures. In this perspective, we summarize the current efforts to stabilize α-FAPbI₃, and propose that pure α-FAPbI₃ is an ideal material for single-junction cells, and a triple-layer mesoporous architecture could help to stabilize pure α-FAPbI₃. Furthermore, reducing the band gap and using tandem solar cells may ulteriorly approach the Shockley–Queisser limit efficiency. We also make a prospect that the enhancement of industrial applications as well as the lifetime of devices may help achieve commercialization of PSCs in the future.

This perspective is focused on the current development state and the future development direction of FA-based perovskite materials and solar cells.     

3D/2D multidimensional perovskites: Balance of high performance and stability for perovskite solar cells

1. Download : Download high-res image (118KB)
2. Download : Download full-size image

     

Review on engineering two-dimensional nanomaterials for promoting efficiency and stability of perovskite solar cells

Perovskite solar cell(PSC) has gradually shown its great superiority in photovoltaic filed to compete commercial solar cells owing to its great advantages, such as high efficiency and low fabrication cost. On the way towards commercialization, great efforts have been achieved by accelerating charge extraction and reducing carrier recombination. Recently, two-dimensional(2 D) layered materials have attracted increasing interests for application in PSCs due to their distinctive chemical and physic...     

The conducting polymer electrolyte based on polypyrrole-polyvinyl alcohol and its application in low-cost quasi-solid-state dye-sensitized solar cells

The effect of polypyrrole (PPy) on the polyvinyl alcohol (PVA)-potassium iodide (KI)-iodine (I₂) polymer electrolytes has been investigated and optimized to use in a dye-sensitized solar cell (DSSC). The different weight ratios of PVA: PPy (93: 2, 91: 4, 89: 6, 87: 8, and 85: 10 wt%) polymer electrolytes (PE) were prepared by solution casting. Structural, complex formation and surface roughness of the prepared electrolytes was confirmed by X-ray diffraction, FTIR, and atomic force microscopy (AFM) respectively. Conductivity plots of all polymer films showed increasing trend with temperature and concentration of PPy. The activation energy of the optimized system found to be 0.871 kJ mol^?1. UV-visible spectrum was adopted to characterize the absorption spectra of the material revealed that increase in the absorbance with increasing PPy content and shifting the absorbance maximum towards lower energy. The indirect band gap decreased from 3.78 to 2.14 eV and direct band gap decreased from 3.88 to 2.71 eV. The EIS analyses revealed the lower charge transfer resistance of 3.029 Ω cm² at the interface between CE and PE. The excellent performance was observed in the fabricated DSSCs using PVA (85%)/PPy (10%)/KI (5%)/I₂ polymer electrolyte with a short-circuit current density of 11.071 mA cm^?2, open-circuit voltage of 0.644 V, fill factor of 0.575, and photovoltaic conversion efficiency of 4.09% under the light intensity of 100 mW cm^?2. Hence, the PPy content in polymer electrolyte influences the remarkable performance of low-cost DSSC.     

New perylene diimide electron acceptors for organic electronics: Synthesis,optoelectronic properties and performance in perovskite solar cells

Two new non-fullerene acceptors based on perylene diimide with acetylenic bridges were designed and synthesized employing Stille and Sonogashira coupling reactions as the key steps. Their optical and electronic properties were explored by UV–VIS spectroscopy and cyclic voltammetry, and energies of frontier molecular orbitals were estimated. Their preliminary studies in perovskite solar cells as electron transport materials showed the best power conversion efficiency for photocells of 14.18% value.     

A random copolymer based on dithienothiophene and diketopyrrolopyrrole units for high performance organic solar cells

A random donor-acceptor semiconducting copolymer based on diketopyrrolopyrrole as the acceptor unit and dithienothiophene as the donor unit has been synthesized and characterized. Preliminary studies of BHJ solar cells based on this polymer with PC(71)BM showed a high PCE of above 5% under 100 mW cm(-2) AM1.5 solar illumination.     

Fluorination strategy enables greatly improved performance for organic solar cells based on polythiophene derivatives

The power conversion efficiencies(PCEs) of organic solar cells(OSCs) have reached 18% recently,which have already met the demand of practical application.However,these outstanding results were generally achieved with donor-acceptor(D-A) type copolymer donors,which can hardly fulfill the low-cost largescale production due to their complicated synthesis processes.Therefore,developing polymer donors with simple chemical structures is urgent for realizing low-cost OSCs.Polythiophene(PT) derivatives are currently regarded as promising candidates for such kind of donor materials,which has been illustrated in many works.In this work,two new alkylthio substituted PT derivatives,P301 and P302,were synthesized and tested as donors in the OSCs using Y5 as the accepto r.In comparison,the introduction of fluorine atoms on the backbone of P302 can not only downshift the energy levels,but also greatly improve the phase separation morphologies of the active layers,which is ascribed to the enhanced aggregation effect and the reduced miscibility with the non-fullerene acceptor.As a result,the P302:Y5-based OSC exhibits a significantly improved PCE of 9.65% than that of P301:Y5-based one,indicating the important role of fluorination in the construction of efficient PT derivative donors.     

Simultaneous achievement of defect passivation and carrier transport promotion by using emerald salt for methylammonium-free perovskite solar cells

Defect passivation along with promoted charge transport is potentially an effective but seldom exploited strategy for high-performance perovskite solar cells (PSCs). Herein, the in situ defect passivation and carrier transport improvement are simultaneously realized by introducing a conductive polymer (i.e., emerald salt, ES) into the precursor solution of methylammonium (MA)-free perovskites. The interaction between ES and uncoordinated Pb²⁺ reduces defect density to suppress the non-radiative recombination. Moreover, ES can act as a “carrier driver” to promote the carrier transport due to its conductive feature, resulting in efficient PSC devices with a decent power conversion efficiency (PCE) of 23.0%, which is among the most efficient MA-free PSCs. The ES-based unencapsulated devices show superior stability, retaining 89.1% and 83.8% of their initial PCEs when subjected to 35 ± 5% relative humidity (RH) storage and 85 °C thermal aging for 1000 h, respectively. To further assess the large-area compatibility of our strategy, 5 × 5 cm² mini modules were also fabricated, delivering an impressive efficiency of 19.3%. This work sheds light on the importance of conductive additives in boosting cell performance by playing multiple roles in passivating defects, retarding the moisture invasion, and enhancing and balancing charge transport.

A conductive polymer, emerald salt (ES), is introduced into methylammonium (MA)-free perovskite solar cells, enhancing the device performance and stability by passivating defects, promoting charge transportation, and retarding the moisture invasion.