Compositions and structures of nanoparticles of pentagonal axial symmetry <Emphasis Type="Italic">D</Emphasis><Subscript>5<Emphasis Type="Italic">d</Emphasis></Subscript>: Nanotubes

The method of determination of the structure and the number of atoms in the shells of nanoparticles as a function of the arrangement of atoms at the symmetry elements of a symmetry group has been developed. The formulas for the calculation of the number of particles with symmetry group D _5d are reported. The number of particles in these shells is determined by three structurally invariant numbers and the “quantum number” of the group order n. The classification of all possible nanostructures with symmetry group D _5d is given: C _θ+10z , z = 0, 1, 2, …, where the basic shells are C _θ = C ₂, C ₁₀, C ₁₂. The sum rule has been obtained for the coordination numbers of shell sites located at symmetry axes. Pentagonal axial nanoparticles are shown to be the initial shells for obtaining (5,5) and (10,10) armchair nanotubes or (5,0) and (10,0) zigzag nanotubes. The general formula of these nanotubes closed with icosahedral and dodecahedral caps is N _20+10p , N _60+10p (p = 1, 2, …). The graphical constructions of all classes of nanoparticles and nanotubes of the pentagonal axial type are reported.     

Splitting of the <Emphasis Type="Italic">d</Emphasis><Superscript><Emphasis Type="Italic">N</Emphasis></Superscript> atomic states in icosahedral 3<Emphasis Type="Italic">d</Emphasis> metal endofullerenes M@C<Subscript>60</Subscript>

Group-theoretical and quantum-chemical investigations of the spectrum of low-lying excited states have been performed by the ROHF and FCI-RAS (Full CI in Restricted Active Space) methods for 3d metal endofullerenes (MEFs) M@C₆₀ (M =Mn, Cr, and Fe) in different charged states. The major purpose of this study is quantum-chemical verification of the anomalous (“non-Bethe’s”) character of splitting of the d ^N atomic states in an electrostatic field with icosahedral symmetry, predicted previously within the theory of integral invariants theory. The interrelation between the integral invariants theory and the quantumchemical methods applied in this work is considered in detail. Our calculations suggest that the d ^N atomic states in the icosahedral field generated by fullerene C60 (I _h ) on a metal atom (ion) remain non-split for different charged states of the metal and C₆₀. Reasons for this phenomenon and other possible approaches to verification of the prediction are discussed. It is demonstrated that the d ^N states of the encapsulated metal are split in icosahedral 3d MEFs only under very strong compression of these structures.     

Stability of <Emphasis Type="Italic">s</Emphasis>-, <Emphasis Type="Italic">p</Emphasis>-, and <Emphasis Type="Italic">d</Emphasis>-element diphosphates in water

The mean atomic Gibbs energies of formation of (Δ _f ? _at ⁰ ) of s-, p-, and d-element diphosphates have been calculated using ion increments of the Gibbs energy (Δ _f G ⁰). The diphosphate hydrolysis kinetics is considered, and a correlation between the Δ _f ? _at ⁰ values and the hydrolysis rate constants is presented.     

Compositions and structures of nanoparticles of trigonal symmetry <Emphasis Type="Italic">D</Emphasis><Subscript>3<Emphasis Type="Italic">d</Emphasis></Subscript>: Nanotubes

A method has been developed for the determination of the structure and number of atoms in the shells of nanoparticles as a function of the arrangement of atoms at the symmetry elements of a symmetry group. The formulas for calculation of the number of particles of symmetry D _3d have been reported. It has been shown that the number of atoms in trigonal shells is determined by three structurally invariant numbers and the quantum number of the group order n. All possible nanostructures of symmetry D _3d have been classified: C_{θ + 6z} , z = 0, 1, 2, ..., where the basic shells are C_θ = C₆, C₈, and C₁₄. A sum rule has been obtained for the coordination numbers of the shell sites located on symmetry axes. Trigonal nanoparticles are parent ones for obtaining (3,0), (6,0), and (9,0) nanotubes of trigonal type. The general formulas of these nanotubes with icosahedral, dodecahedral, and cubic caps are N_{8 + 12p} , N_{20 + 24p} , and N_{60 + 36p} (p = 1, 2, ...), respectively. The graphical constructions of all classes of trigonal nanoparticles and nanotubes are reported.     

The molecular designs and properties of asymmetric heterocycles (HBrBN<Subscript>3</Subscript>)<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> (<Emphasis Type="Italic">n</Emphasis> = 1-4)

The structures and properties of asymmetric heterocycles (HBrBN₃) _n (n = 1-4) are systematically studied at the B3LYP/6-31G* level. The molecules (HBrBN₃) _n (n = 2-4) have the core structures of a 2n-membered ring with alternating boron and α-nitrogen atoms. The relationships between geometrical parameters and oligomerization degree n are discussed. The calculated IR spectra have four main characteristic regions. Trends in thermodynamic properties with temperature and oligomerization degree n are discussed. Thermodynamic analysis of the gas-phase oligomerizations shows that formation of the most stable heterocycles (HBrBN₃) _n (n = 2-4) is enthalpy driven in the range of 200-800 K.     

Electrodeposition of Fe<Subscript> <Emphasis Type="Italic">x</Emphasis> </Subscript>Se<Subscript> <Emphasis Type="Italic">y</Emphasis> </Subscript> films from acidic solutions

Iron selenide (Fe_xSe_y) thin films were electrodeposited on a glassy carbon electrode (GCE) surface under constant potential and pulse potential modes. The deposition mechanism was investigated using cyclic voltammetry. Electrochemical processes at room temperature are accompanied by adsorption of selenium on the electrode surface and complicated by chemical reactions in the solution bulk. Several approaches to control the film stoichiometry were applied: varying of electrodeposition potential; the use of elevated temperatures (60–80°C) to decrease the electrode passivation and electrodissolution of interfering elements under pulse mode. The composition of Fe_xSe_y thin films was analyzed using an energy dispersive X-rays (EDX) analysis.     

A Systematic Search for Structures and Stabilities of Asymmetric Clusters (HfInN<Subscript>3</Subscript>)<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> (<Emphasis Type="Italic">n</Emphasis> = 1-6)

In order to find single source precursors (SSP), the structures, relative stabilities, and IR spectra of small asymmetric clusters (HFInN₃) _n (n = 1–6) are systematically investigated by means of the density functional theory at the B3LYP level. The obtained geometries show that the frameworks of clusters (HFInN₃) _n (n = 2–6) prefer to be 2n-membered ring with alternating indium and α-nitrogen atoms. The averaged binding energies reveal that all of asymmetric clusters (HFInN₃) _n (n = 1–6) can continue to gain energy as the cluster size n increasing. The second-order difference of energy (Δ₂E) and the HOMO-LUMO energy gap (E_gap) as a function of the cluster size n both exhibit a pronounced even-odd alternation phenomenon. The influences of cluster size n and temperature T on the thermodynamic properties of clusters are discussed. Judged by enthalpies and Gibbs free energies, the formations of the most stable clusters (HFInN₃) _n (n = 2–6) from the monomer are thermodynamically favorable in the range of 200–800 K.     

Internal rotation potential functions of the acryloyl chloride molecule in the ground (<Emphasis Type="Italic">S</Emphasis><Subscript>0</Subscript>) and excited (<Emphasis Type="Italic">S</Emphasis><Subscript>1</Subscript>) electronic states

The internal rotation potential function of the acryloyl chloride molecule in the S ₀ and S ₁ electronic states was reproduced using systems of torsional vibration levels obtained for its trans and cis isomers by analyzing the vibrational structure of the UV spectrum of the molecule. The kinematic factor F in the S ₀ ground state was calculated including geometric parameter relaxation as a function of internal rotation angle. The torsional potential parameters in the S ₀ state obtained in this work were substantially different from those determined from the infrared Fourier-transform spectrum ignoring the resonance perturbation of the level with v = 3. The form of the internal rotation potential function and the higher stability of the trans isomer (the main isomer) were substantiated by high-level quantum-mechanical calculations.     

Crystal and molecular structure of <Emphasis Type="Italic">tris</Emphasis>(<Emphasis Type="Italic">m</Emphasis>-chlorophenyl)phosphine selenide

The crystal and molecular structure of tris(m-chlorophenyl)phosphine selenide, C₁₈H₁₂Cl₃PSe (I), was investigated by X-ray diffraction (XRD) analysis. The trigonal rhombohedral structure of I (space group \(R\overline 3 c\), a = 14.110(2) Å, c = 32.360(4) Å, Z = 12) was solved by direct methods and refined by least squares in an anisotropic approximation (R = 0.029) for 1319 averaged measured reflections (CAD-4 automatic diffractometer, λCuK_α).     

Evaluation of the <Emphasis Type="Italic">Q</Emphasis><Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> absorption band maximum in a light-harvesting complex of the bacterial photosynthetic center <Emphasis Type="Italic">Thermochromatium tepidum</Emphasis>

Excitation energies of the bacteriochlorophyll (BChl) chromophores embedded in the photosynthetic light-harvesting complex of the purple bacterium Thermochromatium tepidum are computed using the time-dependent density functional theory based upon the fragmental molecular orbital (FMO-TDDFT) method. The results are correlated with the empirically based estimates of the Q _y absorption maximum, as well as with the observed large red shift induced by the binding of calcium.     

Kinetics of Na|CF<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> and Li|CF<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> systems

Properties of CF _x /Li and CF _x /Na cells were examined while using galvanostatic charging/discharging, electrochemical impedance spectroscopy and scanning electron microscopy (SEM). The capacity during the first cycle was as high as ca. 1000 mAh g^?1. Such an electrode is suitable for primary CF _x /Li and CF _x /Na batteries. SEM images of CF _x cathode showed that during discharging it was transformed into amorphous carbon and LiF or NaF crystals (of diameter of ca. 5–20 μm). These systems (C?+?LiF or C?+?NaF) cannot be reversibly converted back into CF _x /Li or CF _x /Na, respectively. Exchange current densities are between 10^?7 Acm^?2 and 10^?9 Acm^?2 when working with LiPF₆ and NaPF₆ electrolytes (1.12?×?10^?7 Acm^?2 and 6.82?×?10^?9 Acm^?2, respectively). Those values are low and indicate that the charge transfer process may be the rate-determining step. Activation energies for the charge transfer process were 57 and 72 kJ mol^?1 for CF _x /LiPF₆ and CF _x /NaPF₆ systems, respectively. Higher activation energy barrier for the CF/Na⁺?+?e^??→?C?+?NaF reaction results in lower observed exchange current density in comparison to the system with lithium ions.     

Flow Cytometry Analysis of <Emphasis Type="Italic">G</Emphasis><Subscript>0</Subscript>/<Emphasis Type="Italic">G</Emphasis><Subscript>1</Subscript> Diploid Cell Fraction in Ovarian Cancer Tissue

The proportion of diploid cells in the G₀/G₁ cell cycle phases was estimated by flow cytometry in 60 samples of stage III serous ovarian cancer tissue. The tumor tissue shows considerable heterogeneity with regard to the content of this tissue fraction, which ranged from 27 to 95% with a median of 73%. Statistically significant differences in the size of this fraction were identified by comparing tumor subgroups sensitive and resistant to first-line platinum-taxane chemotherapy. Predictive significance of the G₀/G₁ fraction was concluded and quantitative evaluation of this fraction is recommended for clinical use.     

Viscosities and Surface Tensions of Phenetole with <Emphasis Type="Italic">N</Emphasis>-Methyl-2-pyrrolidone, <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-Dimethylformamide and Tetrahydrofuran Binary Systems at Three Temperatures

Viscosities, η, and surface tensions, σ, of binary systems of phenetole (ethoxy benzene or ethyl phenyl ether) with N-methyl-2-pyrrolidone, N,N-dimethylformamide or with tetrahydrofuran were measured over the entire mole fraction range and at (298, 303 and 308) K. The experimental data was used to compute the deviations in viscosity, Δη, and surface tension, Δσ. Values of the excess Gibbs energy of activation G*^E, surface entropy S _σ and surface enthalpy H _σ were calculated. Viscosity data of the binary systems were calculated using the Grunberg and Nissan and the three-body and four-body McAllister correlations. The Redlich–Kister method was used for evaluation of coefficients and standard deviations for Δη, Δσ and G*^E. The results were interpreted in terms of the probable effect of molecular interactions between components as well as polarity.     

Neutron diffraction study of dehydrogenation of titanium carbohydrides TiC<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>H<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>

The possibility of the synthesis of hydrogen-nonstoichiometric cubic titanium carbide ТiС _х of high purity from powdery nonstoichiometric cubic titanium carbohydride ТiС _х H _y or nonstoichiometric titanium carbide with admixture hydrogen by annealing in a continuously maintained vacuum of no worse than 1.33 × 10^–3 Pa at temperatures of 600–750°C for several hours has been shown. Similar annealing at higher temperatures (T ≥ 800°C) does not lead to the complete removal of hydrogen from a sample due to intensive sintering. In this case, it seems that pores between sintered particles are hydrogen traps, and the release of hydrogen through the surface of sintered particles is hindered.     

Synthesis and structure of silicon-containing <Emphasis Type="Italic">N</Emphasis>-methyland <Emphasis Type="Italic">N</Emphasis>-benzoylamides of diisopropylphosphoric acid

Diisopropyl N-benzoyl-N-(trimethylsilyl)phosphoramidate reacts with ClCH₂SiMe₂Cl under mild conditions to form diisopropyl N-benzoyl-N-[(chlorodimethylsilyl)methyl]phosphoramidate (III). Diisopropyl N-methyl-N-(trimethylsilyl)phosphoramidate with ClCH₂SiMe₂Cl affords an N-transsilylation product which does not rearrange into diisopropyl N-[(chlorodimethylsilyl)methyl]-N-methylphosphoramidate (XV) even under severe conditions (4 h, 130°C). Compound XV was prepared by the reaction of diisopropyl phosphorochloridate with N-[(methoxydimethylsilyl)methyl]-N-methylamine followed by treatment of diisopropyl N-[(methoxydimethylsilyl)methyl]-N-methylphosphoramidate with boron trichloride. Analysis of experimental and calculated ²⁹Si chemical shifts points to a five-coordinate silicon atom in compound III and a fourcoordinate silicon atom in compound XV. According to B3LYP calculations with due regard to solvent effects, compound III is an isomer with a C=O→Si bond. By variation of substituents at silicon, phosphorus, and carbonyl carbon atoms, chelate structures with either C=O→Si or P=O→Si dative bonds can be obtained.     

Brazilian <Emphasis Type="Italic">Dioscoreaceas</Emphasis> starches

Determination of the characteristics of native starches is crucial in order to select their best application in various industrial fields. Thus, two different types of non-traditional native starches from the Dioscoreaceas species (Dioscorea sp. and Dioscorea piperifolia Humb. var. Wild) were studied regarding their thermal, structural and rheological properties. The results were contrasted with traditional commercial starch sources (potato, cassava and corn). From the thermogravimetric results (TG/DTG), D. piperifolia starch obtained the highest thermal stability of the samples, except for potato starch. Furthermore, using differential scanning calorimetry and viscoamylograph profiles (RVA), it was found that the Dioscoreaceas starches presented a higher onset (T _o) temperature and susceptibility to retrogradation. They also showed lower values in relation to relative crystallinity, which was calculated from their X-ray patterns and tendency to white (L*) colour. The shapes of the Discoreaceas starch granules were determined using electron microscopy; it was found that as the potato starch the Dioscoreaceas starches showed a wide range of particle size.     

The dynamics of nonadiabatic transitions in collisions between the I<Subscript>2</Subscript>(<Emphasis Type="Italic">E</Emphasis>) and I<Subscript>2</Subscript>(<Emphasis Type="Italic">X</Emphasis>) molecules

The paper presents the results of a theoretical study of the dynamics of nonadiabatic transitions between the ion-pair states E0 _g ⁺ and D0 _u ⁺ of the I₂ molecule induced by collisions with the I₂ molecule in the ground electronic state X0 _g ⁺ . The potential energy surfaces and diabatic coupling matrix elements of electronic states were obtained using a model based on the diatomics-in-molecule approximation. Special perturbation theory for intermolecular interaction was used to show that the large transition dipole moment between the E0 _g ⁺ and D0 _u ⁺ states caused the appearance of additional long-range corrections, an electrostatic dipole-quadrupole correction to the diabatic coupling matrix elements and induction dipole-dipole correction to the potential energy surface. The influence of these corrections on nonadiabatic dynamics was studied at the level of the semiclassical approximation. The electrostatic correction was found to sharply increase the contribution of resonance (accompanied by minimum kinetic energy changes) vibronic transitions at large distances between the colliding molecules. The induction correction had the opposite effect because of the high transition probability at short distances. The results obtained were in qualitative agreement with experimental data. The conclusion was drawn that obtaining quantitative agreement required a more balanced inclusion of interactions at short and long distances.     

<Emphasis Type="Italic">N</Emphasis>-allyl and <Emphasis Type="Italic">N</Emphasis>-propargyl trifluoromethanesulfonimides. Theoretical analysis

Tautomers of N-allyl- and N-propargyl-substituted trifluoromethanesulfonimides (CF₃SO₂)₂NR (R = CH₂CH=CH₂, Z/E-CH=CHMe, CH₂C≡CH, CH=CH=CH₂, C≡CCH₂) were calculated by the DFT (B3LYP, wB97XD, PBE1PBE), MP2, and CBS-QB3 methods. The results were compared with the theoretical data for the corresponding amines and amides NHRR¹ (R¹ = H, CF₃SO₂). It was shown that there is no conjugation between the nitrogen atom and C=C bond and that conjugation exists with the C≡C bond with electron density displacement toward the nitrogen atom. The calculations of anions derived from N-allyl- and N-propargyl-trifluoromethanesulfonimides revealed the possibility of their rearrangement with elimination of trifluoromethanesulfinate anion and formation of its H-complex with N-(prop-2-en-1-ylidene)trifluoromethanesulfonamide or N-(prop-2-yn-1-ylidene)trifluoromethanesulfonamide.     

A study of structural non-stoichiometry with respect to oxygen in <Emphasis Type="Italic">R</Emphasis>BaCo<Subscript>4</Subscript>O<Subscript>7+<Emphasis Type="Italic">x</Emphasis></Subscript> single crystals

Impurity-free RBaCo₄O_7+x (R = Y, Lu) crystals are grown and the evolution of their structure with varying oxygen concentration in the range 0 ≤ x ≤ 1.3 is studied. The structural features of the studied samples required to develop an extended strategy of the X-ray crystallographic experiment, which made it possible to obtain more accurate data on unit cell parameters and additional information on the features of superstructure modulation and diffuse scattering, along with the phase composition of crystalline samples. A crystal chemical analysis of the known structural models of RBaCo₄O_7+x is performed and suggestions are made about possible structural changes occurring when the oxygen concentration increases up to the limit.     

Secondary self-assembly behaviors of PEO-<Emphasis Type="Italic">b</Emphasis>-P<Emphasis Type="Italic">t</Emphasis>BA-<Emphasis Type="Italic">b</Emphasis>-PS triblock terpolymers in solution

A series of PEO₄₅-b-PtBA₅₃-b-PS _x (x = 42, 84, 165) triblock terpolymers were synthesized by the atom transfer radical polymerization and characterized by size exclusion chromatography and ¹H NMR. Their self-assemblies were conducted by a two-step hierarchical self-assembly method and a one-step dialysis method and the self-assembly behaviors were investigated. The morphologies, sizes, and size distributions of micelles produced by the self-assembly were determined by transmission electron microscopy and dynamic light scattering. The secondary self-assembled structure of PEO₄₅-b-PtBA₅₃-b-PS _x obtained by the two-step hierarchical self-assembly could be controlled by tuning the length of PS block, the core forming block. The micelles were uniform with diameters of 20–25 nm and their size distributions, except for that of PEO₄₅-b-PtBA₅₃-b-PS₁₆₅, were narrow with particle size distribution indexes ranging from 0.014 to 0.246. The one-step dialysis of the triblock terpolymers produced vesicular micelles with distinct vesicle walls that exhibited similar thicknesses. The vesicles did not show significant aggregation. The size distribution of PEO₄₅-b-PtBA₅₃-b-PS₄₂ vesicle was the narrowest with a particle size distribution index value of 0.135. The PEO₄₅-b-PtBA₅₃-b-PS₁₆₅ vesicles tended to overlap with each other.