The doubly thermo-responsive triblock copolymer nanoparticles prepared through seeded RAFT polymerization

The doubly thermo-responsive triblock copolymer nanoparticles of polystyrene-block-poly(N-isopropylacrylamide)-block-poly[N,N-(dimethylamino) ethyl methacrylate] (PS-b-PNIPAM-b-PDMAEMA) are successfully prepared through the seeded RAFT polymerization in situ by using the PS-b-PNIPAM-TTC diblock copolymer nanoparticles as the seed. The seeded RAFT polymerization undergoes a pseudo-first-order kinetics procedure, and the molecular weight increases with the monomer conversion linearly. The hydrodynamic diameter (D _h) of the triblock copolymer nanoparticles increases with the extension of the PDMAEMA block. In addition, the double thermo-response behavior of the PS-b-PNIPAM-b-PDMAEMA nanoparticles is detected by turbidity analysis, temperature-dependent 1H-NMR analysis, and DLS analysis. The seeded RAFT polymerization is believed as a valid method to prepare triblock copolymer nanoparticles containing two thermo-responsive blocks.     

Effects of concentration and pH on the thermosensitive behavior of a graft copolymer with polyimide backbone and poly(<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylamino-2-ethyl methacrylate) side chains

Aqueous solutions of the graft copolymer with a polyimide backbone and poly(N,N-dimethylamino-2-ethyl methacrylate) side chains with a molecular mass of M = 4.7 × 10⁵ and a grafting density of side chains of 0.44 are investigated by light scattering and turbidimetry. Solutions are studied in a wide concentration range of 0.0008–0.0250 g/cm³ at рН values varying from 2 to 12 for each concentration. The temperature dependences of optical transmission, scattered light intensity, and hydrodynamic radii of scattering objects are obtained. It is shown that the copolymer is thermosensitive only at pH > 8.0. A decrease in acidity of the medium at a fixed concentration of the copolymer is accompanied by a decline in temperatures corresponding to the onset and end of phase separation Т ₁ and Т ₂, leading to the narrowing of this interval. At constant рН values, temperatures Т ₁ and Т ₂ rise with solution dilution, while the phase transition interval becomes wider.     

Micellization and gelation of the double thermoresponsive ABC-type triblock copolymer synthesized by RAFT

A double thermoresponsive ABC-type triblock copolymer(poly(ethyleneglycol)-block-poly(2-(2-methoxyethoxy) ethyl methacrylate)-block-poly(2-(2-methoxy ethoxy) ethyl methacrylate-co-oligo(ethylene glycol) methyl ether methacrylate, PEG-b-PMEO_2MA-b-P(MEO_2MA-co-OEGMA)) was designed and synthesized by reversible additionfragmentation chain transfer polymerization(RAFT). The ABC-type triblock copolymer endowed a thermal-induced twostep phase transition at 29 and 39 °C, corresponding to the thermosensitive properties of PMEO_2 MA and P(MEO_2MA-coOEGMA) segments, respectively. The two-step self-assembly of copolymer solutions was studied by UV transmittance measurement, dynamic light scattering(DLS), transmission electron microscopy(TEM) and so on. The triblock copolymers showed the distinct thermosensitive behavior with respect to transition temperatures, aggregate type and size, which was correlated to the degree of polymerization of thermosensitive blocks and the molar fraction of OEGMA in the P(MEO_2MAco-OEGMA) segments. In addition, micelles could further aggregate to form the hydrogel by the self-associate of PEG chains under the abduction of the concentration and temperature. The transition from sol to gel was investigated by a test tube inverting method and dynamic rheological measurement.     

Complexation of sodium 2-acrylamido-2-methylpropanesulfonate-monoethanolamine vinyl ether copolymer with polyelectrolytes in aqueous medium

A new water-soluble polyelectrolyte—the copolymer of sodium 2-acrylamido-2-methylpropanesulfonate and monoethanolamine vinyl ether—has been synthesized by free-radical copolymerization. The concentration behavior of the reduced viscosity of copolymer solutions that is typical for polyelectrolytes has been revealed. The reactivity ratios of the monomers have been measured. These values indicate a lower reactivity of monoethanolamine vinyl ether than that of sodium 2-acrylamido-2-methylpropanesulfonate. The complexation of this copolymer with poly(acrylic acid) and poly(N,N-dimethyl-N,N-diallylammonium chloride) has been studied. It has been found that the copolymer demonstrates the polyampholytic behavior and is able to form interpolymer complexes both with polycations and polyanions. It has been established that the polycomplex of the copolymer with polyacrylic acid has the unfolded structure due to the presence of sulfonate groups uninvolved in complexation, while the complex of the copolymer with poly(N,N-dimethyl-N,N-diallylammonium chloride) is compact owing to enhancement of hydrophobic interactions, and the sizes of its species are of the order of 80 nm.     

CO<Subscript>2</Subscript>-responsive Polymeric Fluorescent Sensor with Ultrafast Response

Abstract Response speed is one of the most important evaluation criteria for CO₂ sensors. In this work, we report an ultrafast CO₂ fluorescent sensor based on poly[oligo(ethylene glycol) methyl ether methacrylate]-b-poly[N,N-diethylaminoethyl methacrylate-r-4-(2-methylacryloyloxyethylamino)-7-nitro-2,1,3-benzoxadiazole] [POEGMA-b-P(DEAEMA-r-NBDMA)], in which DEAEMA units act as the CO₂-responsive segment and 4-nitrobenzo-2-oxa-1,3-diazole (NBD) is the chromophore. The micelles composed of this copolymer could disassemble in 2 s upon CO₂ bubbling, accompanying with enhanced fluorescence emission with bathochromic shift. Furthermore, the quantum yield of the NBD chromophore increases with both the CO₂ aeration time and the NBD content. Thus we attribute the fluorescent enhancement to the inhibition of the photo-induced electron transfer between unprotonated tertiary amine groups and NBD fluorophores. The sensor is durable although it is based on “soft” materials. These micellar sensors could be facilely recycled by alternative CO₂/Ar purging for at least 5 times, indicating good reversibility.     

Features of the Interaction of Alcian Blue with Gels Based on Copolymer of <Emphasis Type="Italic">N</Emphasis>-Vinylcaprolactam and Methacrylic Acid

The interaction of N-vinylcaprolactam–methacrylic acid copolymer hydrogel and N-vinylcaprolactam homopolymer hydrogel with alcian blue in aqueous solutions is studied. It is shown that copolymer gel are thermo- and pH-sensitive. Dye sorption by the copolymer gel and gel swelling degree depends on the pH of the solution. The features of the system behavior resulting from the pH sensitivity of both the gel and the dye are shown. The thermocollapse of gels incubated in aqueous solutions of alcian blue is studied. It is shown that the transition temperature of N-vinylcaprolactam–sodium methacrylate copolymer gel to the collapsed state decreases with the dye absorption. The temperature-induced collapse of homopolymer gels in dye solutions is reversible, while the copolymer gel mass restores incompletely during the return temperature decrease. The dye absorption by the copolymer gel leads to decreased hysteresis.     

Thermoresponsive behavior of water-salt solutions of a graft copolymer with a main polyimide chain and side poly(<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylamino-2-ethyl methacrylate) side chains

The water-salt solutions of the graft copolymer bearing a polyimide main chain and poly(N,N-dimethylamino-2-ethyl methacrylate) side chains (M = 4.7 × 10⁵, the density of grafting with side chains z = 0.44) are studied by static and dynamic light scattering and turbidimetry. The solutions are investigated in a tenfold range of NaCl concentrations (from 0.015 to 0.15 mol/L) at the polymer concentration from 0.002 to 0.015 g/cm³ and pH from 8 to 12. The temperature dependences of the intensity of scattered light, optical transmission, hydrodynamic radius of scattering objects, and their concentrations in solutions are derived. The temperatures of phase separation onset T ₁ and end T ₂ are determined. It is shown that an increase in the salt content in solution leads to reduction in the polymer solubility and in temperatures T ₁ and T ₂. The watersalt solutions retain all the regularities of phase-separation temperature variation observed for aqueous solutions with change in the concentration of solution and pH of a medium: the values of T ₁ and T ₂ increase upon dilution and growth of acidity.     

<Emphasis Type="Italic">N</Emphasis>-aryl-<Emphasis Type="Italic">o</Emphasis>-iminobenzoquinones as novel regulators of radical polymerization

The effect of a number of quinoid compounds on methyl methacrylate polymerization initiated by azo-bis(isobutyronitrile) has been studied. It has been revealed that N-aryl-o-iminobenzoquinones, in contrast to o-benzoquinones, can provide radical polymerization of methyl methacrylate in controllable mode. The efficiency of the compounds as chain growth regulators has been found to depend on their composition and reaction conditions. It has been established that 4,6-di-tert-butyl-N-(2,6-diethylphenyl)-o-iminobenzoquinone and 4,6-di-tert-butyl-N-(2,6-diisopropylphenyl)-o-iminobenzoquinone under radical initiation conditions provide the synthesis of poly(methyl methacrylate) with wide-range molecular weight, retaining polydispersity indices about ~1.4–1.8 up to deep conversions.     

An enhanced immobilization of BSA biomolecule on anionic hydrogels: swelling and adsorption modeling

The three-dimensional structure of hydrogels plays a leading role in several areas of applications. The hydrogels are more and more used as systems of immobilized and controlled release of biomolecules in biotechnology and bio-pharmacy industries. To improve protein adsorption capacity in poly(acrylamide) hydrogels, maleic acid co-monomer was included into the reaction mixture during hydrogel synthesis. So, hydrogels of poly(acrylamide) and its copolymers with diprotic maleic acid were prepared by copolymerization and chemical crosslinking with N,N′-methylene bis-acrylamide. Swelling behavior in distilled water, in physiological saline and in bovine serum albumin (BSA) solutions was studied. Influence of initial BSA concentration on hydrogel swelling and BSA adsorption was investigated. The high amount of maleic acid present in the hydrogels has a significant effect on the swelling behavior and BSA adsorption. Results showed that the pH sensitivity of hydrogels resulted in the high amount of adsorbed BSA. The adsorption isotherms were described by Langmuir and Freundlich models. The thermodynamic parameter (ΔG _ads ⁰ ) was determined for all obtained hydrogels. We demonstrated the favorable character and reversibility of the BSA adsorption process.     

Aggregative behavior of AB and ABC block copolymers in the solid phase and in a nonselective solvent

Effects of the amount of chemically dissimilar blocks (two or three) and their polarity on the aggregative behavior of АВ and АВС linear block copolymers of various compositions that are based on polystyrene, poly(n-butyl acrylate), and either poly(acrylic acid) or poly(tert-butyl acrylate) in bulk and in the nonselective solvent DMF are studied via differential scanning calorimetry and dynamic light scattering. АВ block copolymers composed of two chemically dissimilar blocks in the diluted solution in DMF are fully dispersed into macromolecular coils. However, the simultaneous incorporation of three incompatible blocks of different polarities (polystyrene, poly(acrylic acid), and poly(n-butyl acrylate)) into the copolymer is accompanied by a well-defined segregation of blocks in the nonselective solvent, regardless of the composition of the block copolymer and the length and sequence of blocks. This phenomenon makes itself evident as the formation of intermacromolecular aggregates in diluted solutions with a mean hydrodynamic radius of 60–120 nm that are stable in the range 10–60°C. A decrease in the level of the thermodynamic incompatibility of blocks (replacement of a poly(acrylic acid) polar block with a less polar poly(tert-butyl acrylate) block) or the selective improvement of solvent quality with respect to the polar block (the addition of LiBr to DMF) suppresses the segregation of blocks and may lead to the formation of a molecularly dispersed solution of the block copolymer.     

Influence of the Molecular Mass of Poly(<Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone) on Formation of Cu<Subscript>2</Subscript>O Nanoparticles During Reduction of Divalent Copper Ions with <Emphasis Type="Italic">tert</Emphasis>-Butylamine Borane in Polymer Solution

The process of reduction of divalent copper ions with tert-butylamine borane in dilute aqueous solutions of poly(N-vinylpyrrolidone) is investigated. The influence of polymer molecular mass on properties of the resultant Cu₂O sols is studied. It is shown that Cu₂O nanoparticles with an average diameter of 6–8 nm independent of polymer molecular mass and a relatively narrow size distribution of particles are formed in the systems under study. The contour length of macromolecules and the hydrodynamic diameter of a poly(N-vinylpyrrolidone) macromolecular coil are compared with the diameter of Cu₂O particles. Poly(N-vinylpyrrolidone) with M ≥ 1 × 10⁴ can be used to produce Cu₂O nanoparticles. Poly(N-vinylpyrrolidone) with M > 4 × 10⁴ should be used for the formation of long-living Cu₂O sols.     

Synthesis of water soluble metalloporphyrin-cored amphiphilic star block copolymer photocatalysts for an environmental application

Two series of water-soluble metalloporphyrin-cored amphiphilic star block copolymers were synthesized by controlled radical polymerizations such as atom transfer radical polymerization (ATRP) and reversible addition fragmentation chain transfer (RAFT), which gave eight amphiphilic block copolymer arm chains consisting of poly(n-butyl acrylate-b-poly(ethylene glycol) methyl ether methacylate) (PnBA-b-PEGMEMA, M_n,GPC = 78,000, M_w/M_n = 1.2, 70 wt% of PPEGMEMA) and poly(styrene-b-2-dimethylamino ethyl acrylate) (PS-b-PDMAEA, M_n,GPC = 83,000, M_w/M_n = 1.2, 67 wt% of PDMAEA), yielding porphyrin(Pd)-(PnBA-b-PPEGMEMA)₈ and porphyrin(Pd)-(PS-b-PDMAEA)₈, respectively. Obtained metalloporphyrin polymer photocatalysts were homogeneously solubilized in water to apply to the removal of chlorophenols in water, and was distinguished from conventional water-insoluble small molecular metalloporphyrin photocatalysts. Notably, we found that the water-soluble star block copolymers with hydrophobic–hydrophilic core–shell structures more effectively decomposed the chlorophenol, 2,4,6-trichlorophenol (2,4,6-TCP), in water under visible light irradiation (k = 1.39 h^?1, t_1/2 = 0.5 h) in comparison to the corresponding water-soluble star homopolymer, because the hydrophobic core near the metalloporphyrin effectively captured and decomposed the hydrophobic chlorophenols in water.     

Linear-Dendritic Block Copolymers Based on <Emphasis Type="Italic">N</Emphasis>-Isopropylacrylamide and Perfluorinated Polyphenylenegermane: Synthesis and Properties at Various Interfacial Boundaries

It is shown that linear-dendritic block copolymers poly(N-isopropylacrylamide)–block–polyphenylenegermane can be prepared by the polymerization of N-isopropylacrylamide in the presence of bis(pentafluorophenyl)germane followed by activated polycondensation with tris(pentafluorophenyl)germane. The properties of the dilute solutions and Langmuir monolayers of the functional polymers and the linear-dendritic block copolymers of N-isopropylacrylamide are studied.     

Synthesis and surface properties of a new fluorinated acrylic diblock copolymer via AGET ATRP

A series of fluorinated diblock copolymers poly(2,2,3,4,4,4-hexafluorobutyl methacrylate)-b-poly(glycidyl methacrylate) PHFMA-b-PGMA with different fluorine content were synthesized by activator generated by electron transfer atom transfer radical polymerization (AGET ATRP). FTIR, ¹H NMR and GPC data verified feasibility and controllability of the synthesis. In order to evaluate the effect of chain structure on the surface properties, corresponding homopolymer poly(2,2,3,4,4,4-hexafluorobutyl methacrylate) and random copolymer copoly(2,2,3,4,4,4-hexafluorobutyl methacrylate-r-glycidyl methacrylate) were also comparatively studied. Contact angle measurements indicated that the water and ethyleneglycol contact angles of block- and random copolymers increased with increase of fluorine content, but in different manner. This difference comes from different surface energy at the same fluorine content on film surface. The surface stability of block-copolymer was obviously better than that of random copolymer; the same results were observed in heat resistance tests.     

Syntheses,structures, and solid-state phosphorescence characteristics of <Emphasis Type="Italic">trans</Emphasis>-bis(salicylaldiminato)Pt(II) complexes bearing perpendicular <Emphasis Type="Italic">N</Emphasis>-aryl functionalities

The syntheses, structures, and solid-state emission characteristics of trans-bis(salicylaldiminato)Pt(II) complexes bearing N-aromatic functionalities are described herein. A series of Pt complexes bearing various N-phenyl (1) and N-(1-naphthyl) (2) groups on the salicylaldiminato ligands were prepared by reacting PtCl₂(CH₃CN)₂ with the corresponding N-salicylidene aromatic amines, and the trans-coordination and crystal packing of these complexes were unequivocally established based on X-ray diffraction (XRD). Complexes with 2,6-dimethylphenyl (1c), 2,6-diisopropylphenyl (1d), 1-naphthyl (2a), and 1-(2-methylnaphthyl) (2b) groups on the N atoms exhibited intense phosphorescent emission at ambient temperature in the crystalline state, while those with phenyl (1a), 2,6-dibromophenyl (1b), and 2,6-bis(N,N-dimethylamino)phenyl (1e) functionalities were either less emissive or non-emissive under the same conditions. XRD analyses identified significant intramolecular interactions between Pt and H atoms of the N-aryl functionalities in the emissive crystals of 1c, 1d, and 2a. These interactions were evidently an important factor associated with intense emission at ambient temperature.     

Effect of pH on the Behavior of a Random Copolymer of Acrylamide

A temperature- and pH-sensitive random copolymer of N-[3-(diethylamino)propyl]-N-methylacrylamide] and N,N-diethylacrylamide was obtained. The copolymer contained 20 mol % of amine units and had a molecular weight of 3.3 × 10⁴. Buffer solutions containing 0.0102 g/cm³ of the synthesized copolymer were studied in the pH range of 7–13.5 by light scattering and turbidimetry. At low temperatures, macromolecules and large aggregates coexist in the solutions. The copolymer is temperature- and pH-sensitive in the studied pH range. The temperature and the width of the phase separation interval increase with increasing acidity of the medium.     

Influence of mixed common solvent on the co-assembled morphology of PS-<Emphasis Type="Italic">b</Emphasis>-PEO and CdS quantum dots

The hybrid structures of polystyrene-b-poly(ethylene oxide) (PS-b-PEO) block copolymer and inorganic nanoparticles with good stability and biocompatibility have potential applications in drug delivery and bioimaging. Spherical co-assemblies of PS₁₂₀-b-PEO₃₁₈ and oleylamine-capped CdS quantum dots (QDs) are produced successfully in this work by adding water to a mixed common solvent, such as N,N-dimethylmethanamide (DMF)/chloroform, DMF/tetrahydrofuran (THF), or DMF/toluene. The energy dispersive X-ray (EDX) spectrum indicates that QDs are located at the interface between the core and shell of the spherical co-assemblies. The co-assembly process during water addition is traced by transmission electron microscopy (TEM) and turbidity measurement. Spherical co-assemblies are formed through budding from bilayers of the block copolymer and QDs. The morphology of the co-assemblies is related to the miscibility of the QD-dispersing solvents with water and the morphology changes from a spherical to a vesicle-like structure with DMF/toluene. Increasing THF content in the mixed solvent causes morphological transitions from spherical co-assemblies to multi-branched cylinders and micelles where QDs are located in the central core. Increasing chloroform content yields vesicle-like structures with protruding rods on the surface. The mechanism of the morphological transitions is also discussed in detail.     

Cobalt and manganese complexes with redox-active ligands in polymerization of acrylonitrile and methyl methacrylate

The influence of bis[4,6-di-tert-butyl-N-(2,6-dimethylphenyl)-o-iminobenzosemiquinonato]cobalt(ii) and 4,6-di-tert-butyl-N-(2,6-diisopropylphenyl)-o-iminobenzosemiquinonato]-[4,6-di-tert-butyl-N-(2,6-diisopropylphenyl)-o-amidophenolate]manganese(iii) on polymerization of methyl methacrylate and acrylonitrile in the presence of azobisisobutyronitrile (as a traditional radical initiator) and alkyl halides (used for initiation of controlled atom transfer radical polymerization process) was studied. The effect of the nature of the activating agents (amines) and the temperature conditions on the overall polymerization rate of the indicated monomers, as well as molecular weight characteristics of the synthesized polymers, were analyzed. The optimal conditions for the synthesis of polyacrylonitrile and poly(methyl methacrylate) with a relatively narrow molecular weight distribution were selected.     

Structure and characteristics of organic-inorganic hybrid hydrogels based on poly(<Emphasis Type="Italic">N</Emphasis>-vinylcaprolactam)-SiO<Subscript>2</Subscript>

In the reaction system of poly(N-vinylcaprolactam)-water-tetramethoxysilane, the effect of concentrations and ratios between compounds on the structure and characteristics of the formed organicinorganic hybrid hydrogels based on poly(N-vinylcaprolactam) and silica particles is studied. When the over-all concentration of precursors is increased, the number of bonds between hydrogel components increases, and an increase in the number of network crosslinks is provided by an increased fraction of tetramethoxysilane. The method of small-angle X-ray analysis is used to estimate quantitative structural characteristics of silica particles in hydrogels. Silica particles are found to form a fractal three-dimensional structure, which is composed of individual compact clusters with lateral dimensions of 40–60 Å. The average linear dimensions of scattering anisometric particles are 100 × 120 × 360 three-dimensional structure is proposed for hydrogel formed via the interaction of poly(N-vinylcaprolactam) macromolecules and silica nano-particles. The average distance between silica particles is estimated.     

Synthesis of Graft Copolyimides with Poly(<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylamino-2-ethyl methacrylate) Side Chains and Hybrid Nanocomposites with Silver Nanoparticles

The controlled radical polymerization of N,N-dimethylamino-2-ethyl methacrylate on polyimide multicenter macroinitiators under the action of the activating complex of Cu(I) with nitrogen-containing ligands is studied. The complex investigation of the kinetics of copolymerization and the molecular-mass characteristics of the products is performed. The polarity of a medium and the nature of the nitrogen-containing ligand used to prepare the catalytic complex considerably affect the rate of polymerization and the composition and molecular-mass characteristics of the product. Process conditions that enable the synthesis of regularly graft copolyimides with poly(N,N-dimethylamino-2-ethyl methacrylate) side chains are determined. It is shown that the products of grafting copolymerization may be used as a nanoreactor and a stabilizing agent for the template synthesis of composite structures containing silver nanoparticles in the absence of additional reducing agents.