铬(III)离子催化铈(IV)离子氧化四氢糠醇的反应动力学及机理

在酸性介质中用氧化还原滴定法研究了铈(IV)离子在铬(III)离子催化作用下,于25～40℃区间氧化四氢糠醇的反应动力学.结果表明反应对铈(IV)和四氢糠醇均为一级.准一级速率常数kobs随催化剂[Cr(III)]增加而增大,亦随[H+]增加而增大,而随[HSO-4]增加而减小.在氮气保护下,反应不能引发丙烯酰胺聚合,说明在反应中没有自由基产生.提出了催化剂、底物和氧化剂间生成双核加合物的反应机理.通过kobs与HSO-4的依赖关系,并结合Ce(IV)在溶液中的平衡,找到了本反应体系的动力学活性物种是Ce(SO4)2.还计算出一些速率常数及相应的活化参数.     

铱(III)离子催化铈(IV)离子氧化四氢糠醇的动力学及机理

在酸性介质中用氧化还原滴定法研究了铈(IV)离子在痕量铱(III)离子催化作用下,于298￣313K区间氧化四氢糠醇(THFA)的反应动力学.结果表明,反应对铈(IV)离子为一级,对铱(III)离子也为一级,对四氢糠醇的表观反应级数为正分数.准一级速率常数kobs随[H ]增加而增大,而随[HSO-4]增加而减小.在氮气保护下,反应能引发丙烯腈聚合,说明在反应中有自由基产生.通过kobs与[HSO4-]的依赖关系,找到本反应体系的动力学活性物种是Ce(SO4)2,并计算出平衡常数,速控步骤的速率常数及相应的活化参数.     

铱(III)离子催化铈(IV)离子氧化四氢糠醇的动力学及机理

在酸性介质中用氧化还原滴定法研究了铈(IV)离子在痕量铱(III)离子催化作用下，于298~313 K区间氧化四氢糠醇(THFA)的反应动力学. 结果表明，反应对铈(IV)离子为一级，对铱(III)离子也为一级，对四氢糠醇的表观反应级数为正分数. 准一级速率常数kobs随[H+]增加而增大，而随[HSO₄－]增加而减小. 在氮气保护下，反应能引发丙烯腈聚合，说明在反应中有自由基产生. 通过kobs与[HSO₄－]的依赖关系，找到本反应体系的动力学活性物种是Ce(SO₄)₂，并计算出平衡常数，速控步骤的速率常数及相应的活化参数.     

铬(Ⅲ)离子催化铈(Ⅳ)离子氧化四氢糠醇的反应动力学及机理

在酸性介质中用氧化还原滴定法研究了铈(Ⅳ)离子在铬(Ⅲ)离子催化作用下,于25～40℃区间氧化四氢糠醇的反应动力学.结果表明反应对铈(Ⅳ)和四氢糠醇均为一级.准一级速率常数kobs随催化剂[Cr(Ⅲ)]增加而增大,亦随[H+]增加而增大,而随[HSO-4]增加而减小.在氮气保护下,反应不能引发丙烯酰胺聚合,说明在反应中没有自由基产生.提出了催化剂、底物和氧化剂间生成双核加合物的反应机理.通过kobs与HSO-4的依赖关系,并结合Ce(Ⅳ)在溶液中的平衡,找到了本反应体系的动力学活性物种是Ce(SO4)2.还计算出一些速率常数及相应的活化参数.     

铱（III）离子催化铈（IV）离子氧化异丁醇的反应动力学及机理

在酸性介质中用氧化还原滴定法研究了铈（IV）离子在痕量铱（III）离子催化作用下,于25～40 ℃区间氧化异丁醇（BA）的反应动力学.结果表明反应对铈（IV）离子为一级,对异丁醇的表观反应级数为正分数.准一级速率常数kobs随[H＋]及催化剂[Ir(Ⅲ)]增加而增大,随[HSO4-]增加而减小.在氮气保护下,反应不能引发丙烯酰胺聚合,说明在反应中没有自由基产生.提出了催化剂、底物和氧化剂间生成双核加合物的反应机理,通过kobs与HSO4-的依赖关系,找到本反应体系的动力学活性物种是Ce(SO4)2＋,并计算出平衡常数、速控步骤的速率常数及相应的活化参数.     

碱性介质中二过碘酸合银(Ⅲ)配离子氧化四氢糠醇的反应动力学及机理

用分光光度法研究了碱性介质中二过碘酸合银(Ⅲ)配离子于27～42℃区间氧化四氢糠醇(THFA)的反应动力学。结果表明,反应对Ag(Ⅲ)及四氢糠醇均为一级,准一级速率常数kobs随[OH^-]增大而增大,随[IO₄^-]增加而减小,并有微弱的正盐效应。在氮气保护下,反应体系不能引发丙烯腈或丙烯酰胺聚合。提出了含有前期平衡的反应机理,求出了平衡常数、速控步骤的速率常数及相应的活化参数。     

碱性介质中二过碘酸合铜(III)配离子氧化四氢糠醇的动力学及机理

本文采用分光光度法研究了二过碘酸合铜(III)配离子在碱性介质中氧化四氢糠醇的动力学及机理. 结果表明反应对[Cu(III)]是一级, 对四氢糠醇是1.3级. 反应速率随体系中[OH^-]的增大而增大, 随过碘酸浓度的增大而减小, 反应体系加入硝酸钾盐时,速率增大, 有正盐效应. 在氮气保护下, 体系能够诱发丙烯酰胺聚合. 提出了一种含有自由基过程的反应机理, 据此导出了一个能够解释本文全部实验事实的速率方程. 求得了速率控制步骤的速率常数, 并给出了相应的活化参数.     

碱性介质中二过碘酸合铜(Ⅲ)配离子氧化四氢糠醇的动力学及机理

本文采用分光光度法研究了二过碘酸合铜(Ⅲ)配离子在碱性介质中氧化四氢糠醇的动力学及机理.结果表明反应对[Cu(Ⅲ)]是一级,对四氢糠醇是1.3级.反应速率随体系中[OH~-]的增大而增大,随过碘酸浓度的增大而减小.反应体系加入硝酸钾盐时,速率增大,有正盐效应.在氮气保护下,体系能够诱发丙烯酰胺聚合.提出了一种含有自由基过程的反应机理,据此导出了一个能够解释本文全部实验事实的速率方程.求得了速率控制步骤的速率常数,并给出了相应的活化参数.     

碱性介质中二过碘酸合银（Ⅲ）配离子氧化四氢糠醇的反？…

用分光光度法研究了碱性介质中二过磺酸合银配离子于２７－４２℃区间氧化四氢糠醇（ＴＨＦＡ）的反应动力学。结果表明,反应对Ａｇ及四氢糠醇均为一级,准一级速率常数ｋｏｂｓ随「ＯＨ＾－」增大而增大,随「ＩＯ＾－４」增加而减小,并有微弱的正盐效应。在氮气保护下,反应体系不能引发丙烯腈或丙烯酰胺聚合。     

二过碘酸合镍(Ⅳ)配离子氧化氨基乙酸的反应动力学及机理(英文)

在碱性介质中于 2 5～ 40℃用分光光度法研究了二过碘酸合镍(Ⅳ)配离子(DPN)氧化氨基乙酸的动力学.结果表明:反应对DPN为准一级,对氨基乙酸为正分数级.准一级速率常数(kobs)随[OH-]增加而增加:随[IO4 -]增加而减小,无盐效应并未检出自由基存在,我们假设了一过碘酸合镍(Ⅳ)配离子(MPN)是氧化剂的活性物种,提出包括DPN和MPN存在前期平衡的氧化反应机理,进而求出反应的活化参数     

Kinetics and mechanism of ruthenium(III) catalyzed oxidation of tetrahydrofurfuryl alcohol by cerium(IV) in sulfuric acid media

The kinetics and mechanism of ruthenium(III) catalyzed oxidation of tetrahydrofurfuryl alcohol (THFA) by cerium(IV) in sulfuric acid media have been investigated spectrophotometrically in the temperature range 298–313 K. It is found that the reaction is first-order with respect to Ce^IV, and exhibits a positive fractional order with respect to THFA and Ru^III. The pseudo first-order ([THFA]≫[Ce^IV]≫[Ru^III]) rate constant k _obs decreases with the increase of [HSO ₄ ⁻ ]. Under the protection of nitrogen, the reaction system can initiate polymerization of acrylonitrile, indicating the generation of free radicals. On the basis of the experimental results, a reasonable mechanism has been proposed and the rate equations derived from the mechanism can explain all the experimental results. From the dependence of k _obs on the concentration of HSO ₄ ⁻ , has been found as the kinetically active species. Furthermore, the rate constants of the rate determining step together with the activation parameters were evaluated.     

Kinetics and mechanism of oxidation of tetrahydrofurfuryl alcohol by dihydroxydiperiodatonickelate (IV) complex in aqueous alkaline medium

The kinetics of oxidation of tetrahydrofurfuryl alcohol by dihydroxydiperiodatonickelate (IV) complex in the temperature range of 20–35°C has been studied by spectrophotometry in aqueous alkaline medium. The reaction order in [Ni(IV)] was found to be unity and that in [alcohol] to be 1.64–1.69. The rate of oxidation increases with increase in [OH^?] and decreases with increase in [IO₄^?], indicating that dihydroxymonoperiodatonickelate (IV) complex is the reactive species of oxidant. Salt effect studies indicated that the reaction is of ion-dipole type. Under the protection of nitrogen the reaction system does not induce polymerization of acrylonitrile or acrylamide, which indicates that a one-step two-electron transfer mechanism without free radical intermediate may be in operation. A mechanism involving a preequilibrium of an adduct formation between Ni(IV) and alcohol has been proposed. All the experimental phenomena can be explained by the equation derived from the mechanism. The activation parameters of the rate-determining step have been calculated. © John Wiley & Sons, Inc.     

Kinetic Study of the Ce(III)‐, Mn(II)‐, or Ferroin‐Catalyzed Belousov‐Zhabotinsky Reaction with Allylmalonic Acid

In a stirred batch experiment and under aerobic conditions, ferroin (Fe(phen)₃²⁺) behaves differently from Ce(III) or Mn(II) ion as a catalyst for the Belousov‐Zhabotinsky (BZ) reaction with allylmalonic acid (AMA). The effects of bromate ion, AMA, metal‐ion catalyst, and sulfuric acid on the oscillating pattern were investigated. The kinetics of the reaction of AMA with Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion was studied under aerobic or anaerobic conditions. The order of reactivity of metal ions toward reaction with AMA is Fe(phen)₃³⁺ > Mn(III) > Ce(IV) under aerobic conditions whereas it is Mn(III) > Ce(IV) > Fe(phen)₃³⁺ under anaerobic conditions. Under aerobic or anaerobic conditions, the order of reactivity of RCH(CO₂H)₂ (R = H (MA), Me (MeMA), Et (EtMA), allyl (AMA), n‐Bu (BuMA), Ph (PhMA), and Br (BrMA)) is PhMA > MA > BrMA > AMA > MeMA > EtMA > BuMA toward reaction with Ce(IV) ion and it is MA > PhMA > BrMA > MeMA > AMA > EtMA > BuMA toward reaction with Mn(III) ion. Under aerobic conditions, the order of reactivity of RCH(CO₂H)₂ toward reaction with Fe(phen)₃³⁺ ion is PhMA > BrMA > (MeMA, AMA) > (BuMA, EtMA) > MA. The experiment results are rationalized.     

Spectroscopic,electrochemical, and structural aspects of the Ce(IV)/Ce(III) DOTA redox couple chemistry in aqueous solutions

The redox potential of the Ce(IV)/Ce(III) DOTA is determined to be 0.65 V versus SCE, pointing out a stabilization of ~13 orders of magnitude for the Ce(IV)DOTA complex, as compared to Ce(IV)_aq. The Ce(III)DOTA after electrochemical oxidation yields a Ce(IV)DOTA complex with a t_1/2 ~3 h and which is suggested to retain the “in cage” geometry. Chemical oxidation of Ce(III)DOTA by diperoxosulfate renders a similar Ce(IV)DOTA complex with the same t_1/2. From the electrochemical measurements, one calculates logK (Ce(IV)DOTA^2?) ~ 35.9. Surprisingly, when Ce(IV)DOTA is obtained by mixing Ce(IV)_aq with DOTA, a different species is obtained with a 2 : 1(M : L) stoichiometry. This new complex, Ce(IV)DOTACe(IV), shows redox and spectroscopic features which are different from the electrochemically prepared Ce(IV)DOTA. When one uses thiosulfate as a reducing agent of Ce(IV)DOTACe(IV), one gets a prolonged lifetime of the latter. The reductant seems to serve primarily as a coordinating ligand with a geometry which does not facilitate inner sphere electron transfer. The reduction process rate in this case could be dictated by an outer sphere electron transfer or DOTA exchange by S₂O₃^2?. Both Ce(IV)DOTA and Ce(IV)DOTACe(IV) have similar kinetic stability and presumably decompose via decarboxylation of the polyaminocarboxylate ligand.     

Aqueous polymerization of methyl methacrylate initiated by the redox system Ce(IV)–isopropyl alcohol. Kinetics and molecular weight

Polymerization of methyl methacrylate was carried out in aqueous nitric acid in the temperature range 26–40°C, with the redox initiator system ceric ammonium nitrate–isopropyl alcohol. A short induction period was observed, as well as the attainment of a limiting conversion, and the total ceric ion consumption with reaction time. The reaction orders were 1/2 and 3/2 with respect to the IPA and monomer concentration, respectively, within the range (3–5) × 10^?3M of Ce(IV). But at lower Ce(IV) concentration (≤ 1 × 10^?3M), the order with respect to monomer and Ce(IV) changed to 1 and 1/2, respectively. The rate of ceric ion disappearance was first order with respect to Ce(IV) concentration and (R_Ce)^?1 was proportional to [IPA]^?1. Both the rate of polymerization and the rate of ceric ion consumption increase with rise in temperature. The average-molecular weight can be controlled by variations in IPA, Ce(IV), and monomer concentrations, and in temperature. A kinetic scheme involving oxidation of IPA by Ce(IV) via complex formation, whose decomposition gives rise to a primary radical, initiation, propagation, and termination of the polymeric radicals by bimolecular interaction is proposed. An oxidative termination of primary radicals by Ce(IV) is also included.     

Aqueous polymerization of acrylamide initiated by cerium (IV)–ethylenediamine tetraacetic acid redox system

Ethylenediamine tetraacetic acid (EDTA) terminated polyacrylamide was obtained by using the EDTA–cerium(IV) ammonium nitrate [Ce(IV)] redox initiator in the aqueous polymerization of acrylamide. The polymerization behaviors as a function of the concentration of Ce(IV), EDTA, and acrylamide as well as temperature were studied. The consumption rate of cerium(IV) depends a first-order reaction on the ceric ion concentration ([Ce(IV)]). The complex formation constant (K) and disproportionation constant (k_d) of Ce(IV)–EDTA chelated complex are 1.67 × 10⁴ and 3.77 × 10^?3, respectively. The rate dependences of polymerization on monomer concentration and EDTA concentration both follow a second-order reaction in the run of initial monomer concentration ([M]_i) equal to 0.2 mol dm^?3. The number average molecular weight increases linearly with the ratio of [M]_i/[Ce(IV)]_i. The mechanism and kinetics for the polymerization was proposed. The kinetic parameters involved were determined. © 1992 John Wiley & Sons, Inc.     

Kinetics and Mechanism of the Cerium(IV) Oxidation of Arnold's Base and the Protonation and Hydroxylation of Michler's Hydrol Blue

In aqueous H₂SO₄, Ce(IV) ion oxidizes rapidly Arnold's base((p-Me₂NC₆H₄)₂CH₂, Ar₂CH₂) to the protonated species of Michler's hydrol((p-Me₂NC₆H₄)₂CHOH, Ar₂CHOH) and Michler's hydrol blue((p-Me₂NC₆H₄)₂CH⁺, Ar₂CH⁺). With Ar₂CH₂ in excess, the rate law of the Ce(IV)-Ar₂CH₂ reaction in 0.100 M H₂SO₄ is expressed -d[Ce(IV)]/dt = k_app[Ar₂CH₂]₀[Ce(IV)] with k_app = 199 ± 8M^?1s^?1 at25°C. When the consumption of Ce(IV) ion is nearly complete, the characteristic blue color of Ar₂CH⁺ ion starts to appear; later it fades relatively slowly. The electron transfer of this reaction takes place on the nitrogen atom rather than on the methylene carbon atom. The dissociation of the binuclear complex [Ce(III)ArCHAr-Ce(III)] is responsible for the appearance of the Ar₂CH⁺ dye whereas the protonation reaction causes the dye to fade. In highly acidic solution, the rate law of the protonation reaction of Michler's hydrol blue is -d[Ar₂CH⁺]/dt = k_obs[Ar₂CH⁺] where K_obs = ((ac + 1)[H*] + bc[H⁺]²)/(a + b[H⁺]) (in HClO₄) and k_obs= ((ac + 1 + e[HSO₄^?])[H⁺] + bc[H⁺]² + d[HSO₄^?] + q[HSO₄^?]²/[H⁺])/(a + b[H⁺] + f[HSO₄^?] + g[HSO₄^?]/[H⁺]) (in H₂SO₄), and at 25°C and μ = 0.1 M, a = 0.0870 M s, b = 0.655 s, c = 0.202 M^?1s^?1, d = 0.110, e = 0.0070 M^?1, f = 0.156 s, g = 0.156 s, and q = 0.124. In highly basic solution, the rate law of the hydroxylation reaction of Michler's hydrol blue is -d[Ar₂CH⁺]/dt = k_OH[OH^?]₀[Ar₂CH⁺] with k_OH = 174 ± 1 M^?1s^?1 at 25°C and μ = 0.1 M. The protonation reaction of Michler's hydrol blue takes place predominantly via hydrolysis whereas its hydroxylation occurs predominantly via the path of direct OH attack.     

Mechanistic study of cerium(IV) oxidation of antimony(III) in aqueous sulphuric acid in the presence of micro amounts of manganese(II) by stopped flow technique

The oxidation of antimony(III) by cerium(IV) has been studied spectrometrically (stopped flow technique) in aqueous sulphuric acid medium. A minute amount of manganese(II) (10⁻⁵ mol dm⁻³) is sufficient to enhance the slow reaction between antimony(III) and cerium(IV). The stoichiometry is 1:2, i.e. one mole of antimony(III) requires two moles of cerium(IV). The reaction is first order in both cerium(IV) and manganese(II) concentrations. The order with respect to antimony(III) concentration is less than unity (ca 0.3). Increase in sulphuric acid concentration decreases the reaction rate. The added sulphate and bisulphate decreases the rate of reaction. The added products cerium(III) and antimony(V) did not have any significant effect on the reaction rate. The active species of oxidant, substrate and catalyst are Ce(SO₄)₂, [Sb(OH)(HSO₄)]⁺ and [Mn(H₂O)₄]²⁺, respectively. The activation parameters were determined with respect to the slow step. Possible mechanisms are proposed and reaction constants involved have been determined.