Temperature effect on the lithium diffusion rate in graphite

The temperature influence on the diffusion coefficient for lithium in graphite is investigated. The activation energy for lithium diffusion in graphite is calculated. Its value is 35 kJ mol^?1.     

最小二乘法计算苯、噻吩和正辛烷在NaY上程序升温脱附活化能

采用程序升温脱附(TPD)技术测定了苯、噻吩和正辛烷在NaY上以不同升温速率升温时的TPD谱图. 利用TPD谱图的峰形和其微分曲线判断了程序升温脱附过程中的脱附级数. 提出了一种利用最小二乘法计算吸附剂/催化剂的脱附活化能及其动力学参数的方法. 以这些TPD谱图为基础, 分别采用传统TPD计算模型、最小二乘法以及一阶微分曲线法计算了苯、噻吩和正辛烷在NaY上的脱附活化能和动力学参数. 结果表明, 最小二乘法对在不同线性升温速率时的程序升温脱附活化能的计算结果是一致的.     

长春碱与中心蛋白的结合及其对蛋白聚集性质的影响

通过光谱、等温滴定量热(ITC)以及分子对接等方法研究了八肋游仆虫中心蛋白N-端半分子(N-EoCen)与长春碱(Vin)之间的相互作用以及Vin对N-EoCen聚集性质的影响。结果表明,Vin可以与N-EoCen以摩尔比1∶1结合于N-EoCen的第一个EF-hand的F螺旋与第二个EF-hand的E、F螺旋之间,条件结合常数约为10⁴L/mol。复合物的形成是放热的过程,主要依靠静电作用与疏水作用。N-EoCen与Vin结合后,构象发生变化,α螺旋含量减少,N-EoCen与Tb³⁺结合能力减弱。最终使得N-EoCen的自聚集以及Tb³⁺诱导的聚集减弱。研究结果为蛋白聚集抑制剂的筛选以及相关药物的研发提供了参考和依据。     

温度对掺杂球形Ni(OH)_2质子扩散的影响

应用微电极恒电位阶跃法研究了在Ni(OH) 2 电极的阳极及阴极过程反应中 ,温度对球形Ni(OH) 2 的质子扩散系数和表观扩散活化能的影响 .研究表明 ,于Ni(OH) 2 中掺杂Co和Co +Zn后可降低其阳极和阴极过程的表观扩散活化能 ,增大质子扩散系数 ,掺Co的效果更加明显 ,而掺Zn则增大表观扩散活化能 ,降低了扩散系数 .这说明前者的掺入其作用是降低了质子扩散阻力使电极的反应活性增加、而后者的掺入则是增大了质子的扩散阻力而使电极反应活性降低 .     

一类新型荧光化学敏感器形成激基缔合物的温度效应

对一类具有分子识别功能的荧光分子敏感器化合物，在水溶液中形成的分子内激基缔合物的温度效应进行了研究。进而提出该类化合物在水溶液中进行了内单体和分子内激基缔合物转化的机制。通过分析所得的热力学数据，同文献值相比较，推导出该类化合物在水溶液中可能存在的几何构型，为该类化合物在作为探针应用时提供理论依据。     

聚合位点对齐聚乙烯基噻吩光谱的影响

利用密度泛函理论PBE0方法,在6-31G基组水平上,对12种采用不同聚合位点的乙烯基噻吩二聚体分子进行了全优化,得到分子的紫外-可见吸收光谱.探讨了聚合位点对齐聚乙烯基噻吩吸收光谱、电子亲和势、电离能和重组能的影响,并研究了聚合度对乙烯基噻吩齐聚物吸收光谱的影响.计算结果表明:采用邻位聚合的乙烯基噻吩二聚体的能隙最小,电离能EIP最小,电子亲和势EEA最高,最大吸收波长较大,吸收强度大,λmax=377.33nm,f=1.0242.随着聚合度的增加,齐聚乙烯基噻吩的吸收光谱发生红移,吸收峰变宽,吸光度增大.十六聚体的最大吸收范围为500~1200nm,最大吸收波长为801.28nm时吸收值为7.003×105L·mol~(-1)·cm~(-1).     

Temperature effect on the solvent extraction of some lanthanides with thenoyltrifluoroacetone

The solvent extraction of Pr, Gd and Yb with thenoyltrifluoroacetone solutions in C₆H₆, CHCl₃ and CCl₄ at 288 K, 298 K, 308 K and 318 K has been investigated. The values of the equilibrium constant have been calculated as well as the values of the thermodynamic parameters H, S and G. The temperature effect on the solvent extraction of lanthanides with thenoyltrifluoroacetone is discussed.

---

Einfluß der Temperatur auf die Extraktion einiger Lanthanoide mit Thenoyltrifluoraceton

Zusammenfassung Es wurde die Extraktion von Pr, Gd und Yb mit Lösungen von Thenoyltrifluoraceton in C₆H₆, CHCl₃ und CCl₄ bei 288 K, 298 K, 308 K und 318 K untersucht. Es wurden die Gleichgewichtskonstanten für die untersucht3n Metalle, Lösungsmittel und Temperaturen sowie die Werte der thermodynamischen Parameter H, S und G berechnet. Der Einfluß der Temperatur auf die Extraktion von Lanthaniden wird diskutiert.

     

The effect of NaOH on dodecyltrimethylammonium hydroxide aggregation in aqueous solutions

The aggregation of dodecyltrimethylammonium hydroxide (DTAOH) in aqueous NaOH solutions was studied as a function of NaOH concentration. As in NaOH-free DTAOH aqueous solutions, the surfactant underwent a stepwise aggregation mechanism. Changes in the structure of aggregates produced an increase of the concentration at which premicellar aggregates could solubilize hydrophobic dyes and also in the concentration at which hydroxide inons join the aggregates.     

Temperature effect on the kinetics of persulfate oxidation of p-chloroaniline

The kinetics of heat-facilitated persulfate oxidation of p-chloroaniline（PCA） in aqueous solutions was measured at five different temperature conditions and at four different oxidant concentrations.The PCA degradation was found to follow a pseudo-first-order decay model when the persulfate was excessive.The pseudo-first-order rate constants of PCA degradation by persulfate（50 mmol/ L） at pH 7.0 are 0.12×10^-4,0.28×10^-4,0.43×10^-4,0.83×10^-4,1.32×10^-4 s^-1 at 10,20,30,40 and 50℃,respectively. Under the above reaction conditions,the reaction has activation energy of 49.97 kJ/mol.The observed rate was found to be function of temperature and oxidant concentration.Raising temperature and increasing persulfate concentration can significantly accelerate the PCA degradation.     

活化能与温度关系图的计算机辅助释疑

作者使用计算机绘制了气体分子能量分布曲线图 ,较全面的阐明了活化能与温度的关系。是对无机化学中活化能与温度关系图的改进与补充。     

Temperature effect on solvent diffusion in rigid and semirigid polyimide films

The diffusion of NMP (n-methyl-pyrrolidinone) solvent in a semirigid rod-like PMDA-ODA (pyromellitic dianhydride-4,4′-oxydianiline) film coated on silicon is found to be case I diffusion at temperatures ranging from 30 to 90°C by the use of a bending beam technique. The diffusion constant increases for the 7.4 μm PMDA-ODA film (which was cured at 300°C) from 3.3 to 318 × 10^?11 cm²/s as the diffusion temperature increases from 30 to 90°C. The corresponding hygroscopic stress in the direction parallel to the film decreases with the increase of temperature, possibly due to the softening of the film at elevated temperatures. The diffusion mechanism, however, changes from case II to case I in a rigid rod-like PMDA-PDA (pyromellitic dianhydride-p-phenylenediamine) film when the diffusion temperature increases. The change in the diffusion mechanism occurs at a higher temperature for thinner films, presumably due to higher ordering and/or orientation in the films. The activation energy for NMP diffusion in the PMDA-ODA films markedly decreases from 93 to 59 kJ/mole as the film thickness increases from 2.2 μm to 11.3 μm. This may also be attributed to decreased ordering in thicker films. © 1994 John Wiley & Sons, Inc.     

A DPD study of asphaltene aggregation: The role of inhibitor and asphaltene structure in diffusion-limited aggregation

The kinetic effects of DBSA (dodecyl benzene sulfonic acid) and a linear amphihile on asphaltene aggregation was investigated, using dissipative particle dynamics molecular simulations. The simulation results indicated that without inhibitor, diffusion-limited asphaltene aggregation can be initiated by a kinetic/diffusive capture process between polar side chain groups rather than by interaction between polyaromatic rings. The most likely reason for this is that the side chains have higher diffusive mobility than the more massive aromatic ring structures. The DBSA acidic head groups adhered to the asphaltene side chain polar groups (the basic functional groups), resulting in lowered mobility of the side chain/DBSA complexes, thereby suppressing asphaltene aggregation initiation. A more mobile amphiphilic inhibitor without the aromatic ring gave a higher asphaltene aggregation rate. Adsorption of asphaltenes on a solid surface was suppressed with DBSA, due to an adsorbed mono-layer of DBSA that occupied a significant fraction of the surface area.     

Study on the Langmuir aggregation of fluorinated surfactants on protein

The microphase adsorption-spectral correction (MPASC) technique was described and applied to the study of the interactions of fluorinated surfactants such as potassium perfluorooctanesulfonate (PFOS) and potassium perfluorobutanesulfonate (PFBS) with human serum albumin (HSA). Sodium octanesulfonate (SOS) was also studied as non-fluorinated surfactant. The aggregation of PFOS, PFBS and SOS obeys the Langmuir monolayer adsorption. The results show that the adsorption ratios of surfactants to HSA are PFOS:HSA = 120:1, PFBS:HSA = 205:1 and SOS:HSA = 18:1. The adsorption constants are K_PFOS-HSA = 5.01 × 10³, K_PFBS-HSA = 9.79 × 10² and K_SOS-HSA = 4.03 × 10³. The detection limits are 2.7 mg/L for BSA using PFOS, 3.1 mg/L using PFBS and 3.1 mg/L using SOS. It was found that fluorinated surfactant exhibited stronger interaction with protein than hydrogenated one, and fluorinated surfactant with long hydrophobic chain exhibited stronger interaction with protein than that with short hydrophobic chain.     

Temperature effect of electrochemically roughened gold substrates on polymerization electrocatalysis of polypyrrole

In this work, electrochemical methods were used to prepare complexes with Au and Cl species on bulk Au substrates. Then the electrochemically roughened Au substrates were further heat-treated at different temperatures. The effect of temperatures used in heat treatments between 25 and 100 °C on electrocatalytical polymerization of polypyrrole (PPy) formed on the prepared gold substrates was first investigated. The result indicates that the optimally electrocatalytical capability of the heat-treated Au substrate for PPy polymerization is at 75 °C. Moreover, the autopolymerized PPy on the roughened Au substrate treated at 75 °C demonstrates the highest oxidation level and oxidation degree of 0.32 and 0.50, respectively. Primary results indicate that complexes with positively charged Au act as oxidants, and perchlorate and chloride ions act as dopants for the oxidation-polymerization of PPy.     

Changes of conformation and aggregation state induced by binding of lanthanide ions to insulin

To clarify the mechanism of lanthanide ions (Ln3+) on the across-membrane transport of insulin and subsequent reducing blood glucose, the interactions of Ln3+with Zn-insulin and Zn-free insulin are investigated by spectroscopic methods. The results reveal that the binding of Ln3+ to insulin can induce its structure changes from secondary to quaternary structure, depending on the Ln3+ concentration. In the lower concentration, it triggers the conformational changes of insulin monomer in the binding region with insulin receptor (B(24-30)). It would affect insulin-insulin receptor interaction. Moreover, Ln3+ binding promotes the assembly of insulin monomer from dimer to polymer. The potency of Ln3+ in inducing insulin's aggregation is stronger than that of Zn2+. Furthermore, the aggregation can be reversed partly by EDTA-treatment, indicating that it is not due to denaturation. Similar to Zn2+ effect, Ln3+ can stabilize insulin hexamer in a certain range of concentration, but is stronger than the former.     

The effect of fractal dimension of porous catalysts on the activation energy of CO oxidation

An approach based on the interrelationship between the activation energy of the rate-limiting step of a heterogeneous catalytic reaction and the structure of the catalyst surface expressed in terms of fractal geometry is presented for the example of the oxidation of carbon monoxide. The activation energy of this reaction was shown to increase with increasing nonuniformity of the catalyst surface given by the fractal dimension D_F. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 1, pp. 43–46, January–February, 2007.     

两性树脂解吸动力学的研究──温度对扩散系数的影响

本文采用浅床法对阳离子在弱酸强碱两性树脂相内的扩散速度进行了研究。发现温度升高 ,其粒内扩散系数增大 ,离子价态越高 ,扩散过程的活化能就越大 ,表明温度的改变对高价阳离子的扩散速度的影响更显著     

焙烧温度对费托合成铁基催化剂还原动力学的影响

采用沉淀法和喷雾干燥技术制备了一个典型的费托合成铁基催化剂(100Fe/3K/6SiO_2,质量比)所得样品在不同温度下焙烧5 h.分别利用N_2吸附和穆斯保尔谱表征了催化剂的织构和物相性质,同时利用热重分析仪记录了催化剂在H2气氛中的还原过程,并利用气固反应模型对还原曲线进行了动力学模拟.结果表明,300~600℃焙烧后催化剂的还原过程可用相同的模型拟合,其中由α-Fe_2O_3还原为Fe_3O_4的过程可用一维晶相形成与生长模型或三维相界面反应模型描述,Fe_3O_4还原为α-Fe的过程受二维晶相形成与生长模型控制.而对于700℃焙烧后的催化剂,其还原过程可能受晶相形成与生长模型和收缩核模型共同影响.随着焙烧温度的提高,催化剂的还原能力减弱,还原过程活化能升高.这可能是由于焙烧温度的提高导致晶粒尺寸增大和晶格缺陷减少所致.     

凝胶型聚合物电解质的电导率与温度的关系

凝胶型聚合物电解质的电导率与温度的关系孙晓光，林云青，齐力，景遐斌，王佛松（中国科学院长春应用化学研究所长春１３００２２）关键词凝胶电解质，离子电导率，活化能无定形聚合物电解质电导与温度的依赖关系一般可用Ｖｏｇｅｌ－Ｔａｍｍａｎ－Ｆｕｌｃｈｅｒｃ（Ｖ...     

Temperature Oscillations Characterized by An Overall Activation Energy

Temperature oscillations obtained during the heterogeneous catalytic oxidation of ethanol on Pd-Al₂ O₃ in a dynamic calorimeter were characterized by an overall activation energy. This parameter was determined by a non-isothermal kinetic method using the minimum and maximum values of the oscillations temperature. Using the bifurcation diagram with the oxygen as a bifurcation parameter an E value between 27.6 and 28.2 kJ mol^-1 was obtained. With ethanol as bifurcation parameter the E values lies between 28.1 and 31.1 kJ mol^-1 for 3.5 to 4.0 vol% ethanol and between 25.8 and 27.6 kJ mol^-1 for 4.0 to 4.7 vol% ethanol. These results have been discussed. This revised version was published online in July 2006 with corrections to the Cover Date.