Determination of hydroxyl groups and/or water on the surface of oxide catalysts by a pulse chromatographic method

A pulse chromatographic method based on the reaction of gaseous dimethylzinc tetrahydrofura nate was developed for the determination of surface hydroxyl groups and/or adsorbed water in solid porous materials. The procedure is rapid and gives results comparable to other methods. Some heterogeneous catalysts and supports have been analyzed.

---

, , / , . , . .

     

A Thermal study of the precipitates formed in ammonia neutralization of acidic solutions of dissolved phlogopite

The precipitates containing mainly iron, aluminium and magnesium hydroxides, obtained from phlogopite dissolved in nitric acid by means of the neutralization procedure with ammonia, have been investigated by thermal analysis (TG, DTG and DTA). According to the present study, which is part of a larger investigation into the chemical utilization of Finnish mica minerals, the formation of solid solutions between iron and aluminium hydroxides in silt increases with an increasing neutralization temperature. Nitrogen exists mainly in the form of nitrate in silts, and magnesium forms mixed hydroxides with aluminium, which causes a separation between the iron hydroxide and magnesium aluminium hydroxide phases.

---

Zusammenfassung Die von in Salpetersäure gelöstem Phlogopit durch Neutralisierung mit Ammoniak erhaltenen, hauptsächlich Eisen-, Aluminium- und Magnesiumhydroxid enthaltenden Niederschläge wurden thermoanalytisch (TG, DTG und DTA) untersucht. In der vorliegenden Arbeit, die Teil einer grossangelegten Untersuchung zur chemischen Nutzung finnischer Glimmermineralien ist, wird gezeigt, dass die Bildung fester Lösungen von Eisen- und Aluminiumhydroxiden in Schluff mit zunehmender Neutralisationstemperatur ansteigt. Stickstoff kommt in Schluff hauptsächlich in Form von Nitraten vor, und Magnesium bildet Mischhydroxide mit Aluminium, was eine Trennung der Eisenhydroxidphase von der Magnesium-Aluminium-Hydroxidphase bewirkt.

---

, , , . . , , . , , , , .

     

Catalytic conversion of dimethylsulfide to methylmercaptan

The effect of reaction conditions on the methylmercaptan formation from dimethylsulfide in H₂S catalyzed by -Al₂O₃ has been studied. The reaction is first order with respect to dimethylsulfide. It has been revealed that the maximum activity in this reaction is observed for the catalysts whose surface contains a large number of aprotonic acid centers and moderate-strength basic sites.

---

-Al₂O₃. , . . , , .

     

The thermal behaviour of cis-1,4-polyisoprene in the presence of cobalt salt

The effects of synthetic fatty acids (Versatic 10, average formula C₁₁H₂₂O₂) and the cobalt salts of these acids (cobalt siccative) on the thermal properties of cis-1,4-polyisoprene were examined, using a rheometer and a derivatograph. It was found that both Versatic 10 and the cobalt siccative accelerate the peroxide vulcanization of the isoprene rubber considerably, simultaneously decreasing the cross-linking density and increasing the sol fraction content in the vulÇanizates. This is brought about by parallel radical and ionic decomposition of the peroxide initiator in the presence of these compounds. The addition of Versatic 10 or the cobalt siccative to the polyisoprene rubber does not alter the general character of its thermal changes, but decreases the temperatures of these processes and the degradation degree of the elastomer.

---

Zusammenfassung Der Einfluss synthetischer Fettsäuren (Versatic 10, mittlere Summenformel C₁₁H₂₂O₂) und ihres Kobaltsalzes (Kobalt-Sikkativ) auf die thermischen Eigenschaften von cis-1,4-Polyisopren wurde mittels Rheometer und Derivatograph untersucht. Sowohl Versatic 10 als auch das Kobaltsikkativ beschleunigen die Peroxid-initiierte Vulkanisation des Isoprenkautschuk, gleichzeitig wird die Vernetzungsdichte verringert und der Gehalt an löslichen Stoffen in den Vulkanisaten erhöht. Ursache dafür ist der parallelle Ablauf der radikalischen und ionischen Zersetzung des Peroxids in Gegenwart der Zusätze. Die Beimengung von Versatic 10 oder Kobaltsikkativ zum Polyisoprenkautschuk ändert nicht den allgemeinen Charakter der thermischen Umwandlungen, aber die Temperatur dieser Reaktionen und der Abbau des Elastomeren werden verringert.

---

, C₁₁H₂O₂ ( 10) -1,4-. , 10, , . . 10 , , .

     

Radical addition of methyldichlorosilane to vinyl acetate

The GC-MS method was used to identify the addition products of methyldichlorosilane to vinyl acetate. Radiation-induced addition of methyldichlorosilane to vinyl acetate produces 2-methyldichlorosilylethyl ethyl ether. The reaction follows a radical-chain mechanism. The ratio of the rate constants of methyldichlorosilyl radical addition to C=C and C=O to vinyl acetate amounts to 0.4±0.1 (303 K).

---

- . , - 2- . , C=C C=O 0,4±0,1.

     

Mössbauer study of the thermal decompositions of alkaline earth tris(oxalato)ferrates(III)

The thermal decompositions of alkaline earth tris(oxalato)ferrates(III) (Mg, Ca, Sr and Ba) have been studied by Mössbauer spectroscopy and other techniques. During the thermal decomposition, dehydration occurs first, followed by reduction to iron(II) species, and oxides and ferrites (MFe^IIIO₄) are then formed at higher temperature. In the case of strontium tris(oxalato)ferrate(III), strontium ferrite (SrFe^IVO₄) is formed at 700°.

---

Zusammenfassung Die thermische Zersetzung von Tris(oxalato)ferraten(III) der Erdalkalimetalle (Mg, Ca, Sr, Ba) wurde durch Mössbauer-Spektroskopie und andere Techniken untersucht. Im Verlaufe der thermischen Zersetzung verläuft zunächst die Dehydratisierung, gefolgt von der Reduktion zu Eisen(II)-Species. Oxide und Ferrite (MFe^IIIO₄) werden danach bei höheren Temperaturen gebildet. Strontium-tris(oxalato)-ferrat(III) geht bei 700 °C in Strontiumferrit (SrFe^IVO₄) über.

---

() () , , ë . , , MFe^IIIO₄. 700° SrFe^IVO₄.

     

Effect of the roughness factor on the surface oxidation of ruthenium catalysts

The surface oxidation of ruthenium catalysts with different roughness factor values has been analyzed. It is shown that electro formation of oxidized species on the exposed surface of ruthenium is strongly affected by the rougher characteristics of the surface. This effect has been explained through the addition and removal of protons to and from the oxidized species.

---

. , . .

     

IR study of 1-hexene isomerization on HZSM-5 zeolites

In the IR spectra of 1-hexene adsorbed on HZSM-5 zeolites with different Si/Al ratios, a new band at 1510 cm^–1 has been observed. The cis/trans-2-hexene and trans-2-hexene/1-hexene ratios were determined.

---

1-, HZSM-5 Si/Al, 1510 cm^–1. /-2- -2-/1-.

     

Potassium addition to Fe/MgO, Ni/MgO and Ni/SiO2: Reducibility, dispersity and stabilization of the promoter by the support

The influence of potassium addition on the morphological properties of Fe/MgO and Ni/MgO has been investigated: KNO₃ addition to precursors results in a decrease of the reducibility and in a smaller dispersity of the metallic phase. A loss of potassium is observed at reduction temperatures in excess of 773 K. Silica-supported Ni behaves differently: silica inhibits the potassium volatilization and nickel reducibility is enhanced. This illustrates how promoter effects can be influenced by the nature of support.

---

Fe/MgO Ni/MgO: KNO₃ . , 773 K. , : . .

     

Oxidative dehydrogenation (OXD) of n-butane I. Activity of natural quartz II. Kinetic and catalytic activity of nickel oxides

The oxidative dehydrogenation of n-butane on nickel oxide catalysts and on natural quartz, used as catalysts diluent, were studied. It is assumed that oxygen ions from the oxide lattice participate in the initial step of the reaction.

---

- , . , .

     

Novel evidence for the selective behaviour of tungsten carbide in liquid phase heterogeneous catalytic hydrogenation

Liquid (aqueous) phase catalytic hydrogenation of compounds containing two oxo-groups in -position (biacetyl, glyoxal, alloxan) was studied in the presence of tungsten carbide catalyst. It has been shown that only one of the oxo-groups is affected in the course of the process and is transformed into a >CH–OH group. Comparative studies carried out in the presence of platinum catalyst attest the selective behaviour of tungsten carbide.

---

- - (, , ). , >C=O >CH–OH, . .

     

Interaction of PM12?nVnO40?(3+n) (M=Mo, W) heteropoly complexes with nitrogen oxide

In aqueous solution, PM_12–nV_nO₄₀ ^–(3+n) (M=Mo,W) hetero-polyanions provide a much faster oxidation of NO than mononuclear VO ₂ ⁺ ions, yielding HNO₂, NO ₃ ^– and reduced HPA.

---

, PM_12–nV_nO₄₀ ^–(3+n) (M=Mo,W) , VO ₂ ⁺ , NO HNO₂ NO ₃ ^– .

     

Intermediate oxygen-containing compounds in oxidative condensation of methane over sodium-manganese catalysts

CH₂O conversion over sodium-manganese oxide and oxychloride catalysts in methane dehydrodimerization have been studied under unsteady-state conditions at high temperatures (600–750 °C). It has been established that formaldehyde conversions produce deep oxidation (CO, CO₂), condensation (C₂H₄, C₂H₆) and methanation products through CH₃O^– formation and decomposition.

---

(600–750°C) CH₂O - . , (CO, CO₂) (C₂H₄, C₂H₆), , CH₃O^–.

     

Silylation of porous glass supported platinum catalysts

Effect of silylation with hexamethyldisilazane on adsorption and catalytic properties of porous glass-supported platinum catalysts has been studied. Catalytic activity decreases markedly with an increase in surface coverage by trimethylsilyl groups for all the following reactions examined: hydrogenation of benzene, dehydrogenation of cyclohexane and dehydrocyclization of n-hexane.

---

, . , : , -.

     

Thermal decompositions of complexes of metal ions with riboflavin

Two kinds of complexes of riboflavin with Zn(II), Co(II), Cu(II), Fe(III), Mg(II) and Ca(II) were synthesized, having metal: ligand molar ratios of 11 and 21. When heated, these complexes first lose water. Their thermal degradation in static air atmosphere starts at temperatures higher than, equal to, or lower than that observed for free riboflavin degradation. The rates and stages of pyrolysis were related to the structures of the complexes.

---

Zusammenfassung Es wurden zwei verschiedenartige Komplexe von Riboflavin mit Zn(II), Co(II), Cu(II), Fe(III), Mg(II) und Ca(II) mit einem molaren Metall-Ligandenverhältnis von 11 und 21 dargestellt. Beim Erhitzen geben diese Komplexe zuerst Wasser ab. Ihre thermische Zersetzung beginnt in unbewegter Luftathmosphäre bei einer Temperatur, die entweder mit der für die Zersetzung freien Riboflavins übereinstimmt, größer oder kleiner als diese ist. Die Abschnitte und Geschwindigkeit der Pyrolyse werden mittels der Struktur der Komplexe erläutert.

---

, , , : 11 21. . , . .

     

Relaxation of the rate of o-xylene oxidation to phthalic anhydride on vanadium catalysts

Based on numerical analysis of experimental data, the main ideas of the reaction mechanism have been confirmed and kinetic principles of the non-steady=state reaction have been determined.

---

, .

     

Thermal and other studies on bivalent metal selenltes

BaSeO₃·2·5H₂O(I), PbSeO₃· 2H₂O(II) and CdSeO₃·3.5H₂O(III) were prepared and analysed. Their hygroscopicity and solubility was investigated. These compounds have high thermal Stability, as shown by their TG and DTA data. IR spectra show multi-dentate coordination of selenite to cations, due to considerable splitting of the asymmetric v₃ and v₄ bands of SeO ₃ ^{2 –} in the 780-730 cm^–1 and 420-325 cm^–1 region.Tentative structures have been proposed involving bridging oxygen atoms.

---

Zusammenfassung BaSeO₃-2.5H₂O(I), PbSeO₃ · 2H₂O(II) und CdSeO₃· 3.5H₂O(III) wurden hergestellt, analysiert sowie deren Hygroskopizität und Löslichkeit untersucht. TG- und DTA-Untersuchungen erweisen die hohe thermische Stabilität dieser Verbindungen. Die IR-Spektren zeigen mehrzählige Koordination von Selenit zu Kationen, was aus einer beträchtlichen Aufspaltung der antisymmetrischenv ₃ undv ₄ Banden von SeO ₃ ^{2 –} im Bereich 780-730cm^–1 bzw. 420-325 cm^–1 hervorgeht. Es wurden versuchsweise Strukturen mit überbrückenden Sauerstoffatomen vorgeschlagen.

---

BaSeO₃· 2,5H₂O, PbSeO₃ · 2H₂O CdSeO₃ · 3,5H₂O . . - , v ₃ v ₄ SeO ₃ ² }- 780-730 420-325 ^–1. , .

     

Comparative analysis of catalytic properties of 3d metal acetylacetonates in liquid-phase oxidation of dibenzyl ether

Studies of the liquid-phase oxidation of dibenzyl ether in the presence of 12 acetylacetonates of 3d metals and a comparative analysis of the dependence of the catalytic activity and selectivity of chelates on the atomic number and valence state have been carried out.

---

12 3d . .

     

Cumene hydroperoxide decomposition in the presence of metal complex catalysts supported on amorphous SiO2

By the method of molecular deposition, ions of CrO ₂ ²⁺ VO³⁺ and MoO ₂ ²⁺ were supported on a matrix of amorphous SiO₂. Different types of organic ligands were supported subsequently on the surface compounds so formed. The catalytic activity of the samples was studied in the decomposition of comene hydroperoxide.

---

SiO₂ CrO ₂ ²⁺ , VO³⁺, MoO ₂ ²⁺ . . .

     

Influence of pore diffusion on the rate of n-heptane conversion on a Pt/Al2O3 catalyst under reforming conditions

Under reforming conditions, the rate of n-heptane conversion on a large Pt/Al₂O₃ catalyst grain, in contrast to that in the kinetic region, depends on the hydrogen to hydrocarbon mole ratio. The rate equation for the reaction on a large grain agrees well with the experimental results obtained by a gradientless method under pressure.

---

- , , : . , .