Intramolecular electronic communication in a dimethylaminoazobenzene–fullerene C60 dyad: An experimental and TD‐DFT study

An electronically push–pull type dimethylaminoazobenzene–fullerene C₆₀ hybrid was designed and synthesized by tailoring N,N‐dimethylaniline as an electron donating auxochrome that intensified charge density on the β‐azonitrogen, and on N‐methylfulleropyrrolidine (NMFP) as an electron acceptor at the 4 and 4′ positions of the azobenzene moiety, respectively. The absorption and charge transfer behavior of the hybrid donor‐bridge‐acceptor dyad were studied experimentally and by performing TD‐DFT calculations. The TD‐DFT predicted charge transfer interactions of the dyad ranging from 747 to 601 nm were experimentally observed in the UV‐vis spectra at 721 nm in toluene and dichloromethane. A 149 mV anodic shift in the first reduction potential of the N?N group of the dyad in comparison with the model aminoazobenzene derivative further supported the phenomenon. Analysis of the charge transfer band through the orbital picture revealed charge displacement from the n_(N?N) (nonbonding) and π _(N?N) type orbitals centered on the donor part to the purely fullerene centered LUMOs and LUMO+n orbitals, delocalized over the entire molecule. The imposed electronic perturbations on the aminoazobenzene moiety upon coupling it with C₆₀ were analyzed by comparing the TD‐DFT predicted and experimentally observed electronic transition energies of the dyad with the model compounds, NMFP and (E)‐N,N‐dimethyl‐4‐(p‐tolyldiazenyl)aniline (AZNME). The n_(N?N) → π*_(N?N) and π_(N?N) → π*_(N?N) transitions of the dyad were bathochromically shifted with a significant charge transfer character. The shifting of π_(N?N) → π*_(N?N) excitation energy closer to the n → π*_(N?N) in comparison with the model aminoazobenzene emphasized the predominant existence of charge separated quinonoid‐like ground state electronic structure. Increasing solvent polarity introduced hyperchromic effect in the π_(N?N) → π*_(N?N) electronic transition at the expense of transitions involved with benzenic states, and the extent of intensity borrowing was quantified adopting the Gaussian deconvolution method. On a comparative scale, the predicted excitation energies were in reasonable agreement with the observed values, demonstrating the efficiency of TD‐DFT in predicting the localized and the charge transfer nature of transitions involved with large electronically asymmetric molecules with HOMO and LUMO centered on different parts of the molecular framework. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2010     

Effect of furan π-bridge on the photovoltaic performance of D-A copolymers based on bi(alkylthio-thienyl)benzodithiophene and fluorobenzotriazole

The medium band gap donor-acceptor(D-A) copolymer J61 based on bi(alkylthio-thienyl)benzodithiophene as donor unit and fluorobenzotriazole as acceptor unit and thiophene as π-bridge has demonstrated excellent photovoltaic performance as donor material in nonfullerene polymer solar cells(PSCs) with narrow bandgap n-type organic semiconductor ITIC as acceptor.For studying the effect of π-bridges on the photovoltaic performance of the D-A copolymers,here we synthesized a new D-A copolymer J61-F based on the same donor and acceptor units as J61 but with furan π-bridges instead of thiophene.J61-F possesses a deeper the highest occupied molecular orbital(HOMO) level at-5.45 eV in comparison with that(-5.32 eV) of J61.The non-fullerene PSCs based on J61-F:ITIC exhibited a maximum power conversion efficiency(PCE) of 8.24%with a higher open-circuit voltage(V_(oc)) of 0.95 V,which is benefitted from the lower-lying HOMO energy level of J61-F donor material.The results indicate that main chain engineering by changing π-bridges is another effective way to tune the electronic energy levels of the conjugated D-A copolymers for the application as donor materials in non-fullerene PSCs.     

Low band‐gap modulation of isoindigo‐based copolymers toward high open‐circuit voltage of polymer solar cells

Designing low band‐gap‐conjugated polymers coupled with low HOMO levels attracts great attention in the field of polymer solar cells (PSCs). By using donor–acceptor (D‐A) copolymerization strategy, we designed and synthesized a series of low band‐gap copolymers with deep HOMO levels via introducing an isoindigo (IID) acceptor unit in the copolymers with the donor unit of fluorene (F) (PIID‐F), carbazole (Cz) (PIID‐Cz), thiophene (Th) (PIID‐Th), dithiophene (DTh) (PIID‐DTh), or dithienosilole (DTS) (PIID‐DTS). The HOMO level of the copolymers, measured by electrochemical cyclic voltammetry, varies from ?5.3 eV to ?5.8 eV, depending on different donor units in the copolymers. However, the LUMO levels of all the copolymers are fixed at about ?3.6 eV, which is mainly determined by IID acceptor unit due to its strong electron‐withdrawing ability. The new results will provide an effect help in designing IID based molecular structures. Among the copolymers, PIID‐DTS has a low band gap of 1.58 eV and possesses a low‐lying HOMO energy level of ?5.33 eV. The PSCs based on PIID‐DTS as donor and PC₇₀BM as acceptor exhibited a high open‐circuit voltage (V_oc) of 0.93 V and a primary power conversion efficiency of 2.45%. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3477–3485     

Pyridyl Pyrrolide Boron Complexes: The Facile Generation of Thermally Activated Delayed Fluorescence and Preparation of Organic Light‐Emitting Diodes

The electron positive boron atom usually does not contribute to the frontier orbitals for several lower‐lying electronic transitions, and thus is ideal to serve as a hub for the spiro linker of light‐emitting molecules, such that the electron donor (HOMO) and acceptor (LUMO) moieties can be spatially separated with orthogonal orientation. On this basis, we prepared a series of novel boron complexes bearing electron deficient pyridyl pyrrolide and electron donating phenylcarbazolyl fragments or triphenylamine. The new boron complexes show strong solvent‐polarity dependent charge‐transfer emission accompanied by a small, non‐negligible normal emission. The slim orbital overlap between HOMO and LUMO and hence the lack of electron correlation lead to a significant reduction of the energy gap between the lowest lying singlet and triplet excited states (ΔE_T‐S) and thereby the generation of thermally activated delay fluorescence (TADF).     

Fluorobenzotriazole-Based Medium-Bandgap Conjugated D–A Copolymers for Applications to Fullerene-Based and Nonfullerene Polymer Solar Cells

Two new medium-bandgap (MBG) donor–acceptor (D–A) conjugated polymers (PSTF and PDTS) with fluorobenzotriazole as an A unit and spiro[cyclopenta[1,2-b:5,4-b′]dithiophene-4,9′-fluorene] (STF) or dithienosilole (DTS) as the D unit are designed and synthesized as donor materials for polymer solar cell (PSC) applications. PSTF shows a broader absorption spectrum relative to PDTS reflecting an additional high-energy absorption band due to the conjugated thiophene side chains on STF moiety. Compared with PDTS, PSTF exhibits weaker π–π aggregation and lower lying HOMO level. Photovoltaic properties of the PSCs reveal that either PSTF or PDTS using PC₆₁BM as acceptor exhibits better performances than that of ITIC as acceptor, which results from the simultaneously increased V_oc, J_sc, and FF of PC₆₁BM-based PSCs. Moreover, when combined with PC₆₁BM and ITIC, the PSTF-based PSCs exhibit an efficiency of 3.66% and 2.42%, respectively, which is 45% and almost 1.5 times higher than that of the PDTS-based PSCs, respectively. This can be ascribed to the obviously improved V_oc and FF of PSTF-based PSCs benefitted from the deeper HOMO level and better active layer morphology. Our work demonstrates that using spiro-annulated building block as donor unit to construct MBG D-A copolymers is an alternative and effective approach for achieving efficient donor materials in PSCs. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2330–2343     

The side chain effects on TPD-based copolymers: the linear chain leads to a higher jsc

Abstract

Alkyl substituents appended to polymers play the determining role on self-assembly and film-forming properties, and on device performance. In this work, we highlight the effects of the linear and branched flexible chains appended to the acceptor moiety (A) in D-A type copolymers. Two thieno[3,4-c]-pyrrole-4,6-dione (TPD) based copolymers PT1 and PT2 with different alkyl chains, were designed and synthesized. By comparison their UV-vis absorptions, HOMO/LUMO energy levels, as well as the characters in polymer solar cells, the influences of alkyl chains were investigated. Both copolymers showed molecular weights of 21?kDa and similar optical properties with a medium band gap of 1.93?eV, while PT2 with the branched chain exhibited a lower HOMO than that of PT1 (?5.43 vs???5.37?eV). In bulk heterojunction (BHJ) solar cells, PT1 with a linear chain presented a short circuit current (J_sc) of 6.76?mA cm^?2, open circuit voltage (V_oc) of 0.89?V and power conversion efficiency (PCE) of 2.92%. To the contrary, PT2 showed a J_sc of 3.53?mA cm^?2, V_oc of 0.99?V, delivering a relatively lower PCE of 2.05%. The result indicates that appending a linear alkyl chain to the TPD unit could sufficient enhance the J_sc value of the related polymer.     

吡咯并吡咯二酮与低聚噻吩共聚物电荷传输性质的理论研究

利用密度泛函理论对吡咯并吡咯二酮(DPP)与噻吩形成共聚物的低聚物(PDPP-n T)m的电子结构及二体堆积模型的电荷传输性质进行计算.结果表明,随着聚合物单元内DPP浓度增加,噻吩数减少,聚合物分子的HOMO和LUMO能级同时降低,并且HOMO-LUMO带隙变小;链内相邻DPP单元的电子波函数有效重叠增大,显著改善了链内的电子传输能力;同时分子主链的刚性增强,使分子链间LUMO轨道重叠增强,电子转移积分增大;最终体系由p型向双极性材料转化.     

Jacket‐like structure of donor–acceptor chromophores‐based conducting polymers for photovoltaic cell applications

Through the Stille coupling polymerization, a series of soluble acceptor/donor quinoxaline/thiophene alternating conducting polymers with a hole‐transporting moiety of carbazole as a side chain ( PCPQT ) has been designed, synthesized, and investigated. The UV–vis measurement of the charge‐transferred type PCPQT s of different molecular weights with low polydispersity exhibits a red shifting of their absorption maximum from 530 to 630 nm with increasing chain length (M_n: from 1100 to 19,200). The HOMO and LUMO energy levels of PCPQT can be determined from the cyclic voltammetry measurement to be ?5.36 and ?3.59 eV, respectively. Solar cells made from PCPQT/PCBM bulk heterojunction show a high open‐circuit voltage, V_oc of ～0.75 V, which is significantly higher than that of a solar cell made from conventional poly(3‐hexyl thiophene)/ PCBM as the active polymer PCPQT has lower HOMO level. Further improvements are anticipated through a rational design of the new low band‐gap and the structurally two‐dimensional donor–acceptor conducting polymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1607–1616, 2010     

Novel low‐bandgap oligothiophene‐based donor‐acceptor alternating conjugated copolymers: Synthesis,properties, and photovoltaic applications

A series of novel soluble donor‐acceptor low‐bandgap‐conjugated polymers consisting of different oligothiophene (OTh) coupled to electron‐accepting moiety 2‐pyran‐4‐ylidenemalononitrile (PM)‐based unit were synthesized by Stille or Suzuki coupling polymerization. The combination of electron‐accepting PM building block with varied OTh_n (the number of thiophene unit increases from 3 to 5) results in enhanced π–π stacking in solid state and intramolecular charge transfer (ICT) transition, which lead to an extension of the absorption spectra of the copolymers. Cyclic voltammetry measurements and molecular orbital distribution calculations indicate that the highest occupied molecular orbitals (HOMO) energy levels could be fine‐tuned by changing the number of thiophene units of the copolymers, and the resulting copolymers possessed relatively low HOMO energy levels promising good air stability and high‐open circuit voltage (V_oc) for photovoltaic application. Bulk heterojunction photovoltaic devices were fabricated by using the copolymers as donors and (6,6)‐phenyl C₆₁‐butyric acid methyl ester as acceptor. It was found that the highest V_oc reached 0.94 V, and the short circuit currents (J_sc) were improved from 1.78 to 2.54 mA/cm², though the power conversion efficiencies of the devices were measured between 0.61 and 0.99% under simulated AM 1.5 solar irradiation of 100 mW/cm², which indicated that this series copolymers can be promising candidates for the photovoltaic applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2765–2776, 2010     

Low band gap copolymers based on thiophene and quinoxaline: Their electronic energy levels and photovoltaic application

Low band gap conjugated copolymers containing donor (thiophene)‐acceptor (quinoxaline, Qx ) were synthesized via Stille coupling polymerization. The resulting copolymers were characterized by ¹H NMR, element analysis, GPC, TGA, and DSC. UV‐vis spectra indicated that the increase in the content of quinoxaline units increased the interaction strengthen of the polymer main chains and caused a red‐shift in the optical absorbance. Cyclic voltammetry was used to estimate energy levels of the lowest unoccupied molecular orbit (LUMO) and the highest occupied molecular orbit (HOMO), and the band gap (E_g) of the copolymers. The basic electronic structures of the copolymers were also studied by density‐functional theory (DFT) calculations. Both the experimental and calculation results indicated an increase in the HOMO energy level with increasing the content of quinoxaline units, whereas the corresponding change in the LUMO energy level is much smaller. Polymer photovoltaic cells (PVCs) were fabricated with the structure of ITO/PEDOT:PSS (30 nm)/active layer (80 nm)/Ca (8 nm)/Al(140 nm). The results show that the introduction of a proper amount of electron‐acceptor groups in the polymer main chains induces an extension of the absorption spectra and improves the photovoltaic properties of the copolymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3399–3408, 2009     

Ambipolar charge transport in a donor–acceptor–donor‐type conjugated block copolymer and its gate‐voltage‐controlled thin film transistor memory

We demonstrate a fully conjugated donor–acceptor–donor (D–A–D) triblock copolymer, PBDTT–PNDIBT–PBDTT, which contains PBDTT as the donor block and PNDIBT as the acceptor block. The polymer was synthesized by end‐capping each block with a reactive unit, followed by condensation copolymerization between the two blocks. The physical, optical, and electrochemical properties of the polymer were investigated by comparing those of donor‐ and acceptor‐homopolymers (i.e., PBDTT and PNDIBT), which are the oligomeric monomers, and their blends. On using the newly synthesized block copolymer, ambipolar charge transport behavior was observed in the corresponding thin‐film transistor, and the behavior was compared to that of blend film of donor‐ and acceptor‐homopolymers. Owing to the presence of donor and acceptor blocks in a single polymer chain, it was found that the triblock copolymer can store two‐level information; the ability to store this information is one of the most intriguing challenges in memory applications. In this study, we confirmed the potential of the triblock copolymer in achieving distinct two‐stage data storage by utilizing the ambipolar charge trapping phenomenon, which is expected in donor and acceptor containing random and block copolymers in a thin‐film transistor. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3223–3235     

Benzodifuran‐containing well‐defined π‐conjugated polymers for photovoltaic cells

Two well‐defined alternating π‐conjugated polymers containing a soluble electroactive benzo[1,2‐b:4,5‐b′]difuran (BDF) chromophore, poly(BDF‐(9‐phenylcarbazole)) (PBDFC), and poly(BDF‐benzothiadiazole) (PBDFBTD) were synthesized via Sonogashira copolymerizations. Their optical, electrochemical, and field‐effect charge transport properties were characterized and compared with those of the corresponding homopolymer PBDF and random copolymers of the same overall composition. All these polymers cover broad optical absorption ranges from 250 to 750 nm with narrow optical band gaps of 1.78–2.35 eV. Both PBDF and PBDFBTD show ambipolar redox properties with HOMO levels of ?5.38 and ?5.09 eV, respectively. The field‐effect mobility of holes varies from 2.9 × 10^?8 cm² V^?1 s^?1 in PBDF to 1.0 × 10^?5 cm² V^?1 s^?1 in PBDFBTD. Bulk heterojunction solar cell devices were fabricated using the polymers as the electron donor and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester as the electron acceptor, leading to power conversion efficiencies of 0.24–0.57% under air mass 1.5 illumination (100 mW cm^?2). These results indicate that their band gaps, molecular electronic energy levels, charge mobilities, and molecular weights are readily tuned by copolymerizing the BDF core with different π‐conjugated units. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Direct arylation synthesis of thienoisoindigo‐based low‐band‐gap polymer from asymmetric donor–acceptor monomer

Thienoisoindigo (TIG) moiety has been paid numerous attentions as an excellent acceptor building block in low‐band‐gap polymers. Herein, a new TIG‐dithiophene alternating copolymer (PTIG2T) was successfully synthesized from an asymmetric TIG‐based donor–acceptor (D‐A) monomer via the self‐condensation‐type direct arylation polymerization. PTIG2T exhibited the light absorption over 1000 nm owing to the intramolecular charge transfer in the thin film state, which corresponded to an optical band gap of 1.24 eV. The HOMO and LUMO levels of PTIG2T were determined to be −5.08 and −3.60 eV, respectively. Furthermore, the organic photovoltaic (OPV) with a PTIG2T/PC₆₁BM active layer achieved a power conversion efficiency (PCE) of 3.19%, which is one of the highest PEC achieved by OPVs with TIG‐based materials. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 430–436     

A π‐Stacked Porphyrin–Fullerene Electron Donor–Acceptor Conjugate That Features a Surprising Frozen Geometry

A “frozen” electron donor–acceptor array that bears porphyrin and fullerene units covalently linked through the ortho position of a phenyl ring and the nitrogen of a pyrrolidine ring, respectively, is reported. Electrochemical and photophysical features suggest that the chosen linkage supports both through‐space and through‐bond interactions. In particular, it has been found that the porphyrin singlet excited state decays within a few picoseconds by means of a photoinduced electron transfer to give the rapid formation of a long‐lived charge‐separated state. Density functional theory (DFT) calculations show HOMO and LUMO to be localized on the electron‐donating porphyrin and the electron‐accepting fullerene moiety, respectively, at this level of theory. More specifically, semiempirical molecular orbital (MO) configuration interaction (CI) and unrestricted natural orbital (UNO)‐CI methods shed light on the nature of the charge‐transfer states and emphasize the importance of the close proximity of donor and acceptor for effective electron transfer.     

Modulation of the Physicochemical Properties of Donor–Spiro–Acceptor Derivatives through Donor Unit Planarisation: Phenylacridine versus Indoloacridine—New Hosts for Green and Blue Phosphorescent Organic Light‐Emitting Diodes (PhOLEDs)

This work reports a detailed structure–property relationship study of a series of efficient host materials based on the donor–spiro–acceptor (D‐spiro‐A) design for green and sky‐blue phosphorescent organic light‐emitting diodes (PhOLEDs). The electronic and physical effects of the indoloacridine (IA) fragment connected through a spiro bridge to different acceptor units, namely, fluorene, dioxothioxanthene or diazafluorene moiety, have been investigated in depth. The resulting host materials have been easily synthesised through short, efficient, low‐cost, and highly adaptable synthetic routes by using common intermediates. The dyes possess a very high triplet energy (E_T) and tuneable HOMO/LUMO levels, depending on the strength of the donor/acceptor combination. The peculiar electrochemical and optical properties of the IA moiety have been investigated though a fine comparison with their phenylacridine counterparts to study the influence of planarisation. Finally, these molecules have been incorporated as hosts in green and sky‐blue PhOLEDs. For the derivative SIA‐TXO₂ as a host, external quantum efficiencies as high as 23 and 14 % have been obtained for green and sky‐blue PhOLEDs, respectively.     

Tunable Electronic Properties of a Proton‐Responsive N,N‐Dimethylaminoazobenzene Fullerene (C60) Dyad

A basic N,N‐dimethylaminoazobenzene–fullerene (C₆₀) dyad molecular skeleton is modelled and synthesized. In spite of the myriad use of azobenzene as a photo‐ and electrochromic moiety, the idea presented herein is to adopt a conceptually different path by using it as a bridge in a donor–bridge–acceptor single‐molecular skeleton, connecting the electron acceptor N‐methylfulleropyrrolidine with an electron donor N,N‐dimethylaniline. Addition of trifluoroacetic acid (TFA) results in a drastic colour change of the dyad from yellow to pink in dichloromethane (DCM). The structure of the protonated species are established from electronic spectroscopy and time‐dependent density functional theory (TD‐DFT) calculations. UV/Vis spectroscopic investigations reveal the disappearance of the 409 nm ¹(π→π*) transition with appearance of new features at 520 and 540 nm, attributed to protonated β and α nitrogens, respectively, along with a finite weight of the C₆₀ pyrrolidinic nitrogen. Calculations reveal intermixing of n_(N?N)→π*_(N?N) and charge transfer (CT) transitions in the neutral dyad, whereas, the n_(N?N)→π*_(N?N) transition in the protonated dyad is buried under the dominant ¹(π →π*) feature and is red‐shifted upon Gaussian deconvolution. The experimental binding constants involved in the protonation of N,N‐dimethylanilineazobenzene and the dyad imply an almost equal probability of existence of both α‐ and β‐protonated forms. Larger binding constants for the protonated dyads imply more stable dyad complexes than for the donor counterparts. One of the most significant findings upon protonation resulted in frontier molecular orbital (FMO) switching with the dyad LUMO located on the donor part, evidenced from electrochemical investigations. The appearance of a new peak, prior to the first reduction potential of N‐methylfulleropyrrolidine, clearly indicates location of the first incoming electron on the donor‐centred LUMO of the dyad, corroborated by unrestricted DFT calculations performed on the monoanions of the protonated dyad. The protonation of the basic azo nitrogens thus enables a rational control over the energetics and location of the FMOs, indispensable for electron transport across molecular junctions in realizing futuristic current switching devices.     

Enhancement of thermoelectric properties of D-A conjugated polymer through constructing random copolymers with more electronic donors

Developing new D-A conjugated polymer system for thermoelectric (TE) application is highly desirable. Herein, a series of random copolymers by incorporating 3,4-ethylenedioxythiophene (EDOT) electron rich units into a diketopyrrolopyrrole (DPP) D-A conjugated polymer were designed and synthesized. Compared to the alternating conjugated copolymer PDPP-3T, the HOMO level of the random copolymers are increased as part of the electron deficiency acceptor DPP units in the polymer chain were superseded by electron rich EDOT, which could contribute to effective p-doping. Moreover, through incorporating EDOT to construct random copolymers, it can also induce an orientation change from face-on dominated to edge-on dominated orientation as well as enhance the packing of copolymer chains, which is beneficial to the charge transport. Under same doping condition, the electrical conductivities of the doped polymers increase and the Seebeck coefficient decrease as the increasing of EDOT content, resulting in an optimized power factor of 6.4 μW m⁻¹ K⁻² for the random polymer with EDOT content of 40% which is four times higher than that of alternating conjugated copolymer PDPP-3T. These results demonstrated that constructing random copolymers by incorporating more electronic donors into D-A conjugated polymers may be a promising strategy for developing TE conjugated polymers.     

(Dibenzoylmethanato)boron Difluoride Derivatives Containing Triphenylamine Moieties: A New Type of Electron‐Donor/π‐Acceptor System for Dye‐Sensitized Solar Cells

(Dibenzoylmethanato)boron difluoride derivatives containing triphenylamine moieties were synthesized as a new type of electron‐donor/π‐acceptor system. These new compounds exhibited long‐wavelength absorptions in the UV/Vis spectra, and reversible oxidation and reduction waves in cyclic voltammetry experiments. Their amphoteric redox properties are based on their resonance hybrid forms, in which a positive charge is delocalized on the triphenylamine moieties and a negative charge is localized on the boron atoms. Molecular orbital (MO) calculations indicate that their HOMO and LUMO energies vary with the number of phenylene rings connected to the difluoroboron‐chelating ring. This is useful for optimizing the HOMO and LUMO levels to an iodine redox (I^?/I₃^?) potential and a titanium dioxide conduction band, respectively. Dye‐sensitized solar cells fabricated by using these compounds as dye sensitizers exhibited solar‐to‐electric power conversion efficiencies of 2.7–4.4 % under AM 1.5 solar light.     

Synthesis and photovoltaic properties of a furan-diketopyrrolopyrrole-fluorene terpolymer

We report the synthesis of two solution-processable reduced band gap donor–acceptor conjugated polymers p(C8-DPP-F) and p(C12-DPP-F), composed from 9,9-dioctylfluorene as the donor moiety, diketopyrrolopyrrole (DPP) moiety as the acceptor moiety and furan bridges. Two different alkyl chains, n-dodecyl and n-octyl were used on the DPP moiety and the impact of this structural modification evaluated in detail. Both polymers exhibited similar optical and electrochemical properties with optical band gap of around 1.75 eV as result of LUMO levels near −3.4 eV and high-lying HOMO levels of ∼5.2 eV. Bulk heterojunction photovoltaic devices using these polymers electron donors along with PC₇₀BM as the electron acceptor, gave power conversion efficiency of 1.60% and 0.75% for p(C12-DPP-F) and p(C8-DPP-F) respectively.     

A vinylene‐linked benzo[1,2‐b:4,5‐b']dithiophene‐2,1,3‐benzothiadiazole low‐bandgap polymer

A new heteroarylene‐vinylene donor–acceptor polymer P(BDT‐V‐BTD) with reduced bandgap has been synthesized and its photophysical, electronic and photovoltaic properties investigated both experimentally and theoretically. The structure of the polymer comprises an unprecedented combination of a strong donor (4,8‐dialkoxy‐benzo[1,2‐b:4,5‐b']dithiophene, BDT), a strong acceptor (2,1,3‐benzothiadiazole, BTD) and a vinylene spacer. The new polymer was obtained by a metal‐catalyzed cross‐coupling Stille reaction and fully characterized by NMR, UV–vis absorption, GPC, TGA, DSC and electrochemistry. Detailed ab initio computations with solvation effects have been performed for the monomer and model oligomers. The electrochemical investigation has ascertained the ambipolar character of the polymer and energetic values of HOMO, LUMO and bandgap matching materials‐design rules for optimized organic photovoltaic devices. The HOMO and LUMO energies are consistently lower than those of previous heteroarylene‐vinylene polymer while the introduction of the vinylene spacer afforded lower bandgaps compared to the analogous system P(BDT‐BTD) with no spacer between the aromatic rings. These superior properties should allow for enhanced photovoltages and photocurrents in photovoltaic devices in combination with PCBM. Preliminary photovoltaic investigation afforded relatively modest power conversion efficiencies of 0.74% (AM 1.5G, 100 mW/cm²), albeit higher than that of previous heteroarylene‐vinylene polymers and comparable to that of P(BDT‐BTD). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012