功能梯度压电、压磁柱对称问题的振动分析

本文在不考虑体力、体电流和体电荷的情况下, 假定压电、压磁柱壳的材料参数沿圆柱厚度方向呈幂函数分布时, 研究了径向载荷作用下功能梯度压电、压磁空心柱壳的空间柱对称径向振动问题. 首先在柱坐标系下, 由功能梯度材料的参数、本构、梯度和平衡方程推导得出外激励作用下以Bessel函数表示圆柱壳的应力、电势、磁势等物理量的稳态解, 进而对空间柱对称的压电、压磁功能梯度材料动力控制问题进行了理论分析. 可以看出, 当梯度参数时, 即完全退化为横观各项同性压电、压磁柱对称的振动问题, 与文献[16]的基本方程为柱坐标下得出的结果一致. 最后给出数值算例, 结果表明材料不均匀性对沿径向振动各物理量的显著影响, 且用一个特定不均匀性参数值可以优化电磁力耦合的性能, 这在现代工程设计中尤为重要.     

功能梯度压电、压磁柱壳问题的振动分析

本文在不考虑体力、体电流和体电荷的情况下,假定压电、压磁柱壳的材料参数沿圆柱厚度方向呈幂函数分布,研究了径向载荷作用下功能梯度压电、压磁空心柱壳的空间柱对称径向振动问题.首先在柱坐标系下,由功能梯度压电、压磁空心柱壳的参数、本构、梯度和运动方程推导得出外激励作用下以Bessel函数表示圆柱壳的应力、电势、磁势等物理量的稳态解,进而对空间柱对称的功能梯度压电、压磁柱壳的动力控制问题进行了理论分析.进一步可以看出,当梯度参数β=0时,即完全退化为横观各向同性压电、压磁柱对称的振动问题,与文献[20]的基本方程为柱坐标下得出的结果完全一致.最后给出数值算例,数值结果表明,材料不均匀性对沿径向振动各物理量有显著影响,且用一个特定不均匀性参数β值可以优化力电磁耦合的性能,这在现代工程设计中尤为重要.     

内含弹性介质功能梯度压电球壳的径向振动调控

针对内含弹性介质的功能梯度压电球壳的径向振动问题,利用变量替换技术,求得了解析解。该解适用于材料参数沿厚度按幂律变化且密度的梯度指标可与其它物理量的梯度指标不同的功能梯度压电球壳,克服了以往分析中所有材料参数梯度指标均假设为相等的局限。数值结果表明,功能梯度压电球壳的径向振动特性可利用材料参数梯度指标和内部弹性介质的刚度进行有效调控。     

正交各向异性功能梯度圆柱壳的应力分析及材料剪裁

假设正交各向异性功能梯度材料的弹性系数沿圆柱壳的径向按照任意连续函数变化,采用应力函数法和加权残值法导出了圆柱壳在非轴对称载荷作用下应力分析的一种新的数值解.建立了圆柱壳内部应力状态给定时材料剪裁问题的基本方程,提出了实现圆柱壳内部一种特殊的应力分布时所需要的材料弹性系数沿径向变化的解析解.通过数值算例验证了本文所导出的应力分析的数值解的正确性和收敛性,分析了弹性系数沿径向的变化对圆柱壳内部应力分布的影响.数值算例还给出了实现圆柱壳内部环向应力和切应力沿径向均匀分布时功能梯度材料的弹性系数沿径向的三种不同变化形式.所得研究结果可为正交各向异性功能梯度材料圆柱壳的设计提供一定的参考,同时材料剪裁的解析结果也可作为其他数值方法计算结果验证的考题.     

夹层FGM圆柱壳在扭转载荷作用下的弹性稳定性

采用半解析方法研究了两端简支的功能梯度夹层圆柱壳在端部扭转载荷作用下的弹性稳定性.考虑圆柱壳的里外表层为均匀材料,中间层为材料性质沿厚度方向连续变化的功能梯度材料,并且在界面处的材料性质保持连续. 基于Flügge薄壳理论,建立了位移形式的结构静态屈曲控制方程.根据边界条件将位移表示为三角级数形式,获得包含柱壳端部扭转载荷参数的近似线性代数特征值问题,并通过数值方法求得了表征结构失稳特征的临界载荷. 数值结果表明,临界载荷随着半径与厚度比的增加而减小,随着功能梯度中间层的弹性模量的平均值的增加而增加.      

带初始几何缺陷FGM固支圆柱壳的非线性动力学分析

本文主要研究了带初始几何缺陷的功能梯度固支圆柱壳在不同体积分数下的非线性动力学行为。假定该功能梯度圆柱壳材料的组分是沿厚度的方向呈梯度几何变化的。运用经典板壳理论、von-Karman几何非线性应变位移关系以及Hamilton原理,推导出两端固支FGM圆柱壳的偏微分非线性运动控制方程。本文考虑了圆柱壳的对称模态,利用Galerkin法对上述非线性动力学方程进行截断,得到常微分形式的非线性动力学方程。主要运用Runge-Kutta法进行数值仿真,并且画出了其最大lyapunov指数图,主要研究了面内载荷对振动响应的影响,并对比了不同体积分数对系统非线性动力学的影响。     

功能梯度压电压磁材料粘结的Ⅲ型裂纹问题

利用奇异积分方程方法研究两个半无限大的功能梯度压电压磁材料粘结,在渗透和非 渗透边界条件下的III型裂纹问题. 首先通过积分变换构造出原问题的形式解,然 后利用边界条件通过积分变换与留数定理得到一组奇异积分方程, 最后利用Gauss-Chebyshev方法进行数值 求解,讨论材料参数、材料非均匀参数以及裂纹几何形状等对裂纹尖端应力 强度因子的影响. 从结果中可以看出,压电压磁复合材料中反平面问题的应力奇异性 形式与一般弹性材料中的反平面问题应力奇异形式相同,但材料梯度参数对功能梯度压电压 磁复合材料中的应力强度因子和电位移强度因子有很大的影响.     

功能梯度压电/压磁双材料的周期界面裂纹问题

研究反平面载荷作用下压电/压磁双材料的周期界面裂纹问题,压电/压磁双材料由有限厚度的功能梯度压电层和功能梯度压磁层粘结而成.为便于分析,假设压电层和压磁层的材料性质沿着裂纹的法线方向呈指数变化,基于分离变量和Hilbert核奇异积分方程方法,获得应力强度因子的数值解.数值算例讨论层厚、周期带长度、梯度参数以及材料参数变动等对应力强度因子的影响.结果发现层厚以及裂纹间距的增大会降低裂纹尖端应力强度因子,梯度参数的改变对应力强度因子也有显著的影响.材料参数变动的讨论发现弹性参数的变动对应力强度因子影响最大,其次为电参数,磁参数的变动对应力强度因子影响最小.     

界面特性对功能梯度智能梁静动态响应的影响研究

采用状态空间法分析了两边简支的含压电夹层的功能梯度梁的静力弯曲和自由振动问题．为了考虑中间压电层与上、下功能梯度层之间的粘结效果,采用线性弹簧模型以模拟界面性能．假设上下功能梯度层的材料参数沿厚度连续变化,而压电层则是均匀材料,并且它们都是正交各向异性的．由于功能梯度梁的不均匀性使得直接求解比较困难,文中用层合模型来进行近似．数值算例中,分别考虑了压电层用于传感器或作动器的情形,分析了粘结界面完美程度对组合梁静力弯曲和自由振动频率的影响．     

磁场和温度场作用下金属-陶瓷FGM圆柱壳固有振动

针对温度场中的金属-陶瓷功能梯度圆柱壳,基于物理中面下Love非线性薄壳理论,考虑物性参数沿厚度的梯度分布规律,得到含热应力项的内力和内力矩的表达式．根据电磁和弹性理论,得出磁场环境中导电功能梯度壳体的涡流洛伦兹力模型,给出动能、应变能及其变分表达式．应用哈密顿变分原理和伽辽金离散法,建立功能梯度圆柱薄壳的磁热弹耦合振动方程,推得两端简支约束下非轴对称振动壳体的固有频率特征方程．通过算例,得到功能梯度圆柱壳的固有频率变化曲线图,阐明了磁场、温度、材料属性及结构尺寸对振动频率的影响规律．结果表明：周向波数增大,固有频率呈现先减小后增大的趋势;磁感应强度增加,电磁阻尼效应逐渐明显,固有频率值减小;壳体厚度的增大、长度的减小和温度的大幅升高,使刚度项系数减小,固有频率值增加．     

Thermomechanical vibration analysis of a functionally graded shell with flowing fluid

This paper reports the results of an investigation into the vibration of functionally graded cylindrical shells with flowing fluid, embedded in an elastic medium, under mechanical and thermal loads. By considering rotary inertia, the first-order shear deformation theory (FSDT) and the fluid velocity potential, the dynamic equation of functionally graded cylindrical shells with flowing fluid is derived. Here, heat conduction equation along the thickness of the shell is applied to determine the temperature distribution and material properties are assumed to be graded distribution along the thickness direction according to a power-law in terms of the volume fractions of the constituents. The equations of eigenvalue problem are obtained by using a modal expansion method. In numerical examples, effects of material composition, thermal loading, static axial loading, flow velocity, medium stiffness and shell geometry parameters on the free vibration characteristics are described. The new features in this paper are helpful for the application and the design of functionally graded cylindrical shells containing fluid flow.     

ON THE FREE VIBRATION OF A SUBMERGED FGM HOLLOW SPHERE

The free vibration of a functionally graded material hollow sphere submerged in a compressible fluid medium is exactly analyzed. The sphere is assumed to be spherically isotropic with material constants being inhomogeneous along the radial direction. By employing a separation technique as well as the spherical harmonics expansion method, the governing equations are simplified to an uncoupled second-order ordinary differential equation, and a coupled system of two such equations. Solutions to these equations are given when the elastic constants and the mass density are power functions of the radial coordinate. Numerical examples are finally given to show the effect of the material gradient on the natural frequencies. The project is supported by the National Natural Sciences Foundation of China(No. 19872060).     

An exact solution for the steady-state thermoelastic response of functionally graded orthotropic cylindrical shells

We analyze the steady-state response of a functionally graded thick cylindrical shell subjected to thermal and mechanical loads. The functionally graded shell is simply supported at the edges and it is assumed to have an arbitrary variation of material properties in the radial direction. The three-dimensional steady-state heat conduction and thermoelasticity equations, simplified to the case of generalized plane strain deformations in the axial direction, are solved analytically. Suitable temperature and displacement functions that identically satisfy the boundary conditions at the simply supported edges are used to reduce the thermoelastic equilibrium equations to a set of coupled ordinary differential equations with variable coefficients, which are then solved by the power series method. In the present formulation, the cylindrical shell is assumed to be made of an orthotropic material, although the analytical solution is also valid for isotropic materials. Results are presented for two-constituent isotropic and fiber-reinforced functionally graded shells that have a smooth variation of material volume fractions, and/or in-plane fiber orientations, through the radial direction. The cylindrical shells are also analyzed using the Flügge and the Donnell shell theories. Displacements and stresses from the shell theories are compared with the three-dimensional exact solution to delineate the effects of transverse shear deformation, shell thickness and angular span.     

一种特殊梯度分布的功能梯度圆柱壳的二维分析

功能梯度材料是一种新型材料,其结构分析已成为当今力学研究的热点。本文对一种特殊梯度分布的功能梯度材料圆柱壳进行了二维精确分析。从弹性力学平面应变问题的基本方程出发,引入应力函数,导出功能梯度材料圆柱壳受静载作用下的控制微分方程。假设材料的杨氏模量沿半径方向呈幂函数分布,泊松比为常数,利用分离变量法,导出了简支边界情况下功能梯度圆柱壳的精确解。通过算例分析了不同梯度变化时,功能梯度圆柱壳内的应力和位移变化规律。计算结果表明不同梯度分布的圆柱壳结构中的应力、位移沿厚度方向的变化规律是不同的,有时甚至差别很大。因此对于材料性质梯度变化的功能梯度材料圆柱壳,必须针对其自身特点,建立相应的理论分析模型。     

A nonlocal strain gradient shell model incorporating surface effects for vibration analysis of functionally graded cylindrical nanoshells

In this paper, a novel size-dependent functionally graded(FG) cylindrical shell model is developed based on the nonlocal strain gradient theory in conjunction with the Gurtin-Murdoch surface elasticity theory. The new model containing a nonlocal parameter, a material length scale parameter, and several surface elastic constants can capture three typical types of size effects simultaneously, which are the nonlocal stress effect, the strain gradient effect, and the surface energy effects. With the help of Hamilton's principle and first-order shear deformation theory, the non-classical governing equations and related boundary conditions are derived. By using the proposed model, the free vibration problem of FG cylindrical nanoshells with material properties varying continuously through the thickness according to a power-law distribution is analytically solved, and the closed-form solutions for natural frequencies under various boundary conditions are obtained. After verifying the reliability of the proposed model and analytical method by comparing the degenerated results with those available in the literature, the influences of nonlocal parameter, material length scale parameter, power-law index, radius-to-thickness ratio, length-to-radius ratio, and surface effects on the vibration characteristic of functionally graded cylindrical nanoshells are examined in detail.     

Nonlinear buckling of torsion-loaded functionally graded cylindrical shells in thermal environment

Based on the nonlinear large deflection theory of cylindrical shells, this paper deals with the nonlinear buckling problem of functionally graded cylindrical shells under torsion load by using the energy method and the nonlinear strain–displacement relations of large deformation. The material properties of the functionally graded shells vary smoothly through the shell thickness according to a power law distribution of the volume fraction of the constituent materials. Meanwhile, on the base of taking the temperature-dependent material properties into account, various effects of external thermal environment on the critical state of the shell are also investigated. Numerical results show various effects of the inhomogeneous parameter, the dimensional parameters and external thermal environment on nonlinear buckling of functionally graded cylindrical shells under torsion. The present theoretical results are verified by those in literature.     

Torsional vibration and stability of functionally graded orthotropic cylindrical shells on elastic foundations

In this study, the torsional vibration and stability problems of functionally graded (FG) orthotropic cylindrical shells in the elastic medium, using the Galerkin method was investigated. Pasternak model is used to describe the reaction of the elastic medium on the cylindrical shell. Mixed boundary conditions are considered. The material properties and density of the orthotropic cylindrical shell are assumed to vary exponentially in the thickness direction. The basic equations of the FG orthotropic cylindrical shell under the torsional load resting on the Pasternak-type elastic foundation are derived. The expressions for the critical torsional load and dimensionless torsional frequency parameter of the FG orthotropic cylindrical shell resting on elastic foundations are obtained. The effects of variations of shell parameters, the exponential factor characterizing the degree of material gradient, orthotropy, foundation stiffness and shear subgrade modulus of the foundation on the critical torsional load and dimensionless torsional frequency parameter are examined.     

Postbuckling of FGM cylindrical shells under combined axial and radial mechanical loads in thermal environments

A postbuckling analysis is presented for a shear deformable functionally graded cylindrical shell of finite length subjected to combined axial and radial loads in thermal environments. Heat conduction and temperature-dependent material properties are both taken into account. The temperature field considered is assumed to be a uniform distribution over the shell surface and varied in the thickness direction only. Material properties are assumed to be temperature-dependent, and graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents. The formulations are based on a higher order shear deformation shell theory with von Kármán–Donnell-type of kinematic nonlinearity. A boundary layer theory of shell buckling, which includes the effects of nonlinear prebuckling deformations, large deflections in the postbuckling range, and initial geometric imperfections of the shell, is extended to the case of functionally graded cylindrical shells. A singular perturbation technique is employed to determine the interactive buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling response of perfect and imperfect cylindrical shells with two constituent materials subjected to combined axial and radial mechanical loads and under different sets of thermal environments. The results reveal that the temperature field and volume fraction distribution have a significant effect on the postbuckling behavior, but they have a small effect on the imperfection sensitivity of the functionally graded shell.     

多孔功能梯度材料Timoshenko梁的自由振动分析

基于Timoshenko梁理论研究多孔功能梯度材料梁(FGMs)的自由振动问题.首先,考虑多孔功能梯度材料梁的孔隙率模型,建立了两种类型的孔隙分布.其次,基于Timoshenko梁变形理论,给出位移场方程、几何方程和本构方程,利用Hamilton原理推导多孔功能梯度材料梁的自由振动控制微分方程,并进行无量纲化,然后应用微分变换法(DTM)对无量纲控制微分方程及其边界条件进行变换,得到含有固有频率的等价代数特征方程.最后,计算了固定-固定(C-C)、固定-简支(C-S)和简支-简支(S-S)三种不同边界下多孔功能梯度材料梁自由振动的无量纲固有频率.将其退化为均匀材料与已有文献数据结果对照,验证了正确性.讨论了孔隙率、细长比和梯度指数对多孔功能梯度材料梁无量纲固有频率的影响.