共查询到20条相似文献,搜索用时 15 毫秒
1.
Strategies for simultaneous enantioseparations of three catecholamines (DL-norepinephrine, DL-epinephrine, and DL-isoproterenol) and three structurally related compounds (DL-octopamine, DL-synephrine, and DL-norephedrine) by CZE using sulfated beta-CDs as chiral selectors were investigated. Four different separation modes were attempted: (I) using randomly sulfate-substituted beta-CD (MI-S-beta-CD) at relatively low concentrations in a high-concentration phosphate buffer at low pH in the normal polarity mode, (II) using MI-S-beta-CD at high concentrations at low pH in the reversed polarity mode, (III) using MI-S-beta-CD at moderately high concentrations in a phosphate buffer at neutral pH in the normal polarity mode, and (IV) using the single isomer heptakis(2,3-dihydroxy-6-O-sulfo)-beta-CD (SI-S-beta-CD) at low to moderately high concentrations in a high-concentration BGE at low pH in the normal polarity mode. Among them, enantioseparation of these cationic solutes was best achieved under the conditions of mode (II). In mode (II) and mode (III), temperature is an important factor affecting the enantioresolution of norepinephrine. In mode (I) and mode (IV), the use of a high-concentration BGE (150-200 mM) is crucial for effective enantioseparation of these cationic solutes with sulfated beta-CDs. Comparative studies of enantioseparations of these cationic solutes with MI-S-beta-CD and SI-S-beta-CD reveal that the sulfate substituents of MI-S-beta-CD located at the C(2)- position interact strongly with the diol moiety of catecholamines. 相似文献
2.
Summary Micellar electrokinetic capillary chromatography (MECC) has been applied to the separation and analysis of diastereoisomer impurities in chiral pharmaceutical compounds. Differences in separation mechanism and selectivity make MECC useful as an alternative method to HPLC for analysis of these synthetic inpurities. Advantages of MECC include high efficiency separations and low consumption of sample and solvents. Water soluble and insoluble pharmaceutical compounds are used to illustrate the separation characteristics and quantitative capabilities of this versatile new analytical technique. 相似文献
3.
A chiral procedure based on EKC was developed and validated for determination of the enantiomeric purity of PHA-543613, a drug candidate that was under development for treatment of the cognitive deficits of Alzheimer's disease and schizophrenia. Separation of enantiomers is accomplished via differential, enantiospecific complexation with a single-isomer, precisely sulfated beta-CD and heptakis-6-sulfato-beta-CD (HpS-beta-CD). Both neutral and sulfated CDs were screened before selecting HpS-beta-CD as the chiral selector. The separation is conducted in a 61 cm x 50 microm uncoated fused silica capillary with 25 mM HpS-beta-CD in pH 2.50, 25 mM lithium phosphate as the separation buffer with detection at 220 nm. Application of reverse polarity at -30 kV results in an elution time of about 12 min for PHA-543613 and 13 min for the undesired S-enantiomer. Quantification is versus an authentic reference S-enantiomer as an external standard in combination with an internal standard. The procedure was validated over the range 0.1-2.0% w/w. The detection limit is 0.01-0.02%. The amount of distomer intrinsic to the drug substance is about 0.1% or less. The developed method was used to generate stability data on multiple lots: in one case for up to 3 years. 相似文献
4.
A phospholipid coating with lysozyme as chiral recognition reagent permeated into the phospholipid membrane was developed for the chiral capillary electrophoretic (CE) separation of D- and L-tryptophan. As a kind of carriers, coated as phospholipid membranes onto the inner wall of a fused-silica capillary, liposomes are able to interact with basic proteins such as lysozyme, which may reside on the surface of the phospholipid membrane or permeate into the middle of the membrane. The interaction results in strong immobilization of lysozyme in the capillary. Coatings prepared with liposomes alone did not allow stable immobilization of lysozyme into the phospholipid membranes, as seen from the poor repeatability of the chiral separation. When 1-(4-iodobutyl)-1,4-dimethylpiperazin-1-ium iodide (M1C4) was applied as a first coating layer in the capillary, the electroosmotic flow (EOF) was effectively suppressed, the phospholipid coating was stabilized, and the lysozyme immobilization was much improved. The liposome composition, the running buffer, and the capillary inner diameter all affected the chiral separation of D- and L-tryptophan. Coating with 4 mM M1C4 and then 1 mM phosphatidylcholine (PC)/phosphatidylserine (PS) (80:20 mol%), with 20 mM (ionic strength) Tris at pH 7.4 as the running buffer, resulted in optimal chiral separation with good separation efficiency and resolution. Since lysozyme was strongly permeated into the membrane of the phospholipids on the capillary surface, the chiral separation of D- and L-tryptophan was achieved without lysozyme in the running buffer. The effects of different coating procedures and separation conditions on separation were evaluated, and the M1C4-liposome and liposome-lysozyme interactions were elucidated. The usefulness of protein immobilized into phospholipid membranes as a chiral selector in CE is demonstrated for the first time. 相似文献
5.
6.
For separation of enantiomers in presence of a chiral selector, data obtained with the 1D dynamic simulators SIMUL5complex and GENTRANS are compared to data predicted by PeakMaster 6, a recently released generalized model of the linear theory of electromigration. Four electrophoretic systems with stereoisomers of weak bases were investigated. They deal with the estimation of input data for complexation together with the elucidation of the origin of observed system peaks, the interference of analyte and system peak migration, the change of enantiomer migration order as function of the selector concentration and the inversion of analyte migration direction in presence of a multiply negatively charged selector. For all systems, data predicted with PeakMaster 6 are in agreement with those of the dynamic simulators and simulation data compare well with experimental data that were monitored with setups featuring conductivity and/or UV absorbance detection along the capillary. SIMUL5complex and GENTRANS provide the full dynamics of any buffer and sample arrangement and require very long execution time intervals. PeakMaster 6 is restricted to conventional CZE, is based on an approximate solution of the transport equations, provides data for realistic experimental conditions within seconds and represents a practical tool for an experimentalist. 相似文献
7.
Summary Neutral cyclodextrin (CD)-modified capillary zone electrophoresis (CZE) has been applied to the chiral separation of four
basic drugs— clorprenaline, benzhexol, esmolol and terazosin. Selector screening and concentration optimization experiments
were performed. The resolution was 3.9 for clorprenaline, 2.3 for benzhexol, 3.1 for esmolol and 1.2 for terazosin when the
running electrolyte was 60 mM hydroxypropyl-β-CD, 15 mM heptakis (2,3,6-Tri-O-methyl)-β-CD, 60 mM γ-CD and 60 mM heptakis (2,6-di-O-methyl)-β-CD, respectively, in 50 mM, pH 2.5 sodium phosphate buffer. 相似文献
8.
J.J. Berzas Nevado G. Castañeda Peñalvo R.M. Rodríguez Dorado 《Analytica chimica acta》2005,533(2):127-133
A new capillary zone electrophoresis (CZE) method for the separation of omeprazole enantiomers has been developed. Methyl-β-cyclodextrin (methyl-β-CD) was chosen as the chiral selector, and several parameters, such as cyclodextrin structure and concentration, buffer concentration, pH, and capillary temperature were investigated in order to optimize separation and run times. Analysis times, shorter than 8 min were found using a background electrolyte solution consisting of 40 mM phosphate buffer adjusted to pH 2.2, 30 mM β-cyclodextrin and 5 mM sodium disulphide, hydrodynamic injection, and 15 kV separation voltage. Detection limits were evaluated on the basis of baseline noise and were established 0.31 mg/l for the omeprazole enantiomers. The proposed method was applied to five pharmaceutical preparations with recoveries between 84 and 104% of the labeled contents. 相似文献
9.
In the present study, a capillary electrophoresis method using high concentration of amylose solutions as separation medium has been developed with the aid of dimethyl sulfoxide (DMSO) as co-solvent. The best buffer conditions for primaquine, trihexyphenidyl (THP), sulconazole and cetirizine enantiomers were optimized as 20 mM sodium phosphate buffer with DMSO/water (40/60, v/v) as solvent at a pH of 3.0, containing 10% (w/v) amylose. Partial-filling and semi-permanent coating techniques were used considering the influences of DMSO on UV detection. High chiral resolution for THP enantiomers was obtained showing good chiral separation capacity of this method. The method showed good linearity (R2 > 0.998) over the concentration range of 0.50 and 2.00 mg L−1 for all the enantiomers. The detection limits for the tested enantiomers were in the range from 0.05 to 0.12 mg L−1. The linear calibration models were proven to be adequate for the experimental data by lack-of-fit test. The intra-assay precision, inter-day precision and accuracy were all evaluated to be acceptable. Separation and determination of THP enantiomers in rabbit blood were also carried out. 相似文献
10.
Vincenzo Cucinotta Annalinda ContinoAlessandro Giuffrida Giuseppe MaccarroneMarianna Messina 《Journal of chromatography. A》2010,1217(7):953-967
The review focuses on the role of ionic or ionisable single isomer derivatives (SIDs) of cyclodextrins on the separation of chiral analytes in capillary electrophoresis (CE), covering the period since the year 2000. The advantages of using pure compounds are discussed, as well as the ways to optimise the separations in the context of a rational approach to these techniques. Specific attention is paid to the modulation of the selector–analyte interaction. The advantage due to a detailed knowledge of equilibria occurring in solution during the CE run is underlined, particularly in the case of the presence of metal complexes, as occurs in chiral ligand exchange capillary electrophoresis (CLECE). 相似文献
11.
A novel cationic cyclodextrin, mono-6A-(2-hydroxyethyl-1-ammonium)-6A-β-cyclodextrin chloride (HEtAMCD) has been successfully synthesized and applied as chiral selector in capillary electrophoresis. The NMR study revealed this chiral selector has three recognition sites: β-CD, ammonium cation and hydroxy group in the sidearm to contribute three corresponding driving forces including inclusion complexation, electrostatic interaction and hydrogen bonding. The effect of buffer pH and HEtAMCD concentration (2.5–10 mM) on enantioselectivity, chiral resolution as well as effective mobility of analytes was investigated. This elegantly designed CD exhibits outstanding enantioselectivities toward the studied hydroxyl acids and ampholytic racemates in CE with the aid of extra hydrogen bonding. Under optimum pH 6.0, chiral resolutions over 5 can be readily obtained for hydroxy acids with CD concentration below 5 mM. The comparison study between HEtAMCD and our earlier reported ammonium CDs indicates the hydroxyethylammonium group of HEtAMCD significantly increased the enantioselective capability. 相似文献
12.
Advances in chiral separations of small peptides by capillary electrophoresis and chromatography
下载免费PDF全文
![点击此处可从《Journal of separation science》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Imran Ali Zeid A. Al‐Othman Abdulrahman Al‐Warthan Leonid Asnin Alexander Chudinov 《Journal of separation science》2014,37(18):2447-2466
Many chemical and biological processes are controlled by the stereochemistry of small polypeptides (di‐, tri‐, tetra‐, penta‐, hexapeptides, etc). The biological importance of peptide stereoisomers is of great value. Therefore, the chiral resolution of peptides is an important issue in biological and medicinal sciences and drug industries. The chiral resolutions of peptide racemates have been discussed with the use of capillary electrophoresis and chromatographic techniques. The various chiral selectors used were polysaccharides, cyclodextrins, Pirkle types, macrocyclic antibiotics, crown ethers, imprinted polymers, etc. The stereochemistry of dipeptides is also discussed. Besides, efforts are made to explain the chiral recognition mechanisms, which will be helpful in understanding existing and developing new stereoselective analyses. Future perspectives of enantiomeric resolution are also predicted. Finally, the review concludes with the demand of enantiomeric resolution of all naturally occurring and synthetic peptides. 相似文献
13.
A novel chiral selector, clindamycin succinate, was synthesized and first used as a chiral selector in capillary electrophoresis (CE). The chiral resolution ability of this kind of clindamycin derivation was studied by CE using some racemic drugs as model analytes. From the experimental results, it was found that both resolution and selectivity of the selector were dependent on the following parameters: concentration of chiral selectors, pH of the running buffer, temperature of the capillary column, applied voltage and organic modifier used. The results show that the chiral selector possesses high resolution toward some racemic drugs, including ofloxacin, chlorphenamine, tryptophan, propranolol, sotalol and metoprolol. Excellent chiral resolution of these tested drugs was achieved under the optimal conditions of 50 mM clindamycin succinate, 10% MeOH v/v, 50 mM Tris buffer, pH 4.0, at 22 kV and 20 °C within 25 min. 相似文献
14.
Sami El Deeb Hermann Wätzig Deia Abd El‐Hady Cari Sänger‐van de Griend Gerhard K. E. Scriba 《Electrophoresis》2016,37(12):1591-1608
This review updates and follows‐up a previous review by highlighting recent advancements regarding capillary electromigration methodologies and applications in pharmaceutical analysis. General approaches such as quality by design as well as sample injection methods and detection sensitivity are discussed. The separation and analysis of drug‐related substances, chiral CE, and chiral CE‐MS in addition to the determination of physicochemical constants are addressed. The advantages of applying affinity capillary electrophoresis in studying receptor–ligand interactions are highlighted. Finally, current aspects related to the analysis of biopharmaceuticals are reviewed. The present review covers the literature between January 2013 and December 2015. 相似文献
15.
Summary A capillary electrophoretic method for the determination of lansoprazole in pharmaceutical preparations is described. The
analysis was performed in a fused silica capillary using 20 mM borate buffer at pH 8.7 as a background electrolyte. The best
resolution was obtained by applying a potential of 30 kV and vacuum injection of 1 s. Detection was made at 200 nm. Phenobarbital
sodium was a good internal standard and the migration times were 4.1±0.2 min (lansoprazole) and 5.7±0.2 min (phenobarbital
sodium). A well-correlated calibration equation was found in the range of 1.12×10−5 and 2.24×10−4 M. Limit of detection (LOD) and limit of quantitation (LOQ) were 1.4×10−6 M (RSD 1.44%) and 4.42×10−6 M (RSD 1.49%), respectively. The method was validated and applied to the capsules containing enteric coated pellets of lansoprazole.
The results of the proposed method were compared those of UV spectrophotometry. Insignificant differences were found between
the two methods at the 95% probability level. The described CE method is selective, rapid, sensitive and accurate for the
analysis of lansoprazole in quality control laboratories. 相似文献
16.
Investigation of isomerization of dexibuprofen in a ball mill using chiral capillary electrophoresis
Jonas Urlaub Reinhard P. Kaiser Oliver Scherf-Clavel Carsten Bolm Ulrike Holzgrabe 《Electrophoresis》2021,42(17-18):1790-1799
Besides the racemate, the S-enantiomer of ibuprofen (Ibu) is used for the treatment of inflammation and pain. Since the configurational stability of S-Ibu in solid state is of interest, it was studied by means of ball milling experiments. For the evaluation of the enantiomeric composition, a chiral CE method was developed and validated according to the ICH guideline Q2(R1). The addition of Mg2+, Ca2+, or Zn2+ ions to the background electrolyte (BGE) was found to improve Ibu enantioresolution. Chiral separation of Ibu enantiomers was achieved on a 60.2 cm (50.0 cm effective length) x 75 μm fused-silica capillary using a background electrolyte (BGE) composed of 50 mM sodium acetate, 10 mM magnesium acetate tetrahydrate, and 35 mM heptakis-(2,3,6-tri-O-methyl)-β-cyclodextrin (TM-β-CD) as chiral selector. The quantification of R-Ibu in the mixture was performed using the normalization procedure. Linearity was evaluated in the range of 0.68–5.49% R-Ibu (R2 = 0.999), recovery was found to range between 97 and 103%, the RSD of intra- and interday precision below 2.5%, and the limit of quantification for R- in S-Ibu was calculated to be 0.21% (extrapolated) and 0.15% (dilution of racemic ibuprofen), respectively. Isomerization of S-Ibu was observed under basic conditions by applying long milling times and high milling frequencies. 相似文献
17.
In capillary electrophoresis (CE), separation of enantiomers of a chiral compound can be achieved through the chiral interactions and/or complex formation between the chiral selector and the enantiomeric analytes on leaving their diastereomeric forms with different stability constants and hence different mobilities. A great number of chiral selectors have been employed in CE and among them macrocyclic antibiotics exhibited excellent enantioselective properties towards a wide number of racemic compounds. The use of azithromycin (AZM) as a chiral selector has not been reported previously. This work reports the use of AZM as a chiral selector for the enantiomeric separations of five chiral drugs and one amino acid (tryptophan) in CE. The enantioseparation is carried out using polar organic mixtures of acetonitrile (ACN), methanol (MeOH), acetic acid and triethylamine as run buffer. The influences of the chiral selector concentration, ACN/MeOH ratio, applied voltage and capillary temperature on enantioseparation are investigated. The results show that AZM is a viable chiral selector in CE for the enantioseparation of the type of chiral drugs investigated. 相似文献
18.
19.
Pavel Řezanka Lenka Rokosová Klára Řezanková Markéta Bláhová Michal Řezanka David Sýkora Jindřich Jindřich Vladimír Král 《Journal of separation science》2014,37(19):2779-2784
Three newly synthesized chiral selectors, namely, 2I‐O‐, 3I‐O‐, and 6I‐O‐carboxymethyl‐γ‐cyclodextrin, native γ‐cyclodextrin, and commercially available carboxymethylated γ‐cyclodextrin with degree of substitution of 3–6 were used as additives in a background electrolyte composed of phosphate buffer at 20 mmol/L concentration and pH 2.5. This system was used for the analysis of several biologically significant low‐molecular‐mass chiral compounds by capillary electrophoresis. The results confirmed that the position of carboxymethyl group influences the enantioseparation efficiency of all the studied analytes. The 2I‐O‐ and 3I‐O‐ regioisomers provide a significantly better resolution than native γ‐cyclodextrin, while the 6I‐O‐regioisomer gives only a slightly better enantioseparation than native γ‐cyclodextrin. The application of γ‐cyclodextrin possessing higher number of carboxymethyl groups led to the best resolution for the majority of the compounds analyzed. 相似文献
20.
毛细管区带电泳法拆分手性药物环扁桃酯 总被引:2,自引:0,他引:2
近年来,随着不同种类的手性添加剂[1]在毛细管电泳(CZE)中的使用,毛细管电泳越来越显示出其强有力的手性拆分性能。具有特殊笼状结构并含有多个手性中心的环糊精及其衍生物是毛细电泳手性分离研究中最常采用的手性添加添[2-4]。本文合成了环糊精衍生物单3 O 苯基胺甲酰基 β CD[2]并以之作为手性选择剂分离了β CD及手性药物环扁桃酯。1 实验部分932 3 HVPS高压电源(山东省化工研究院),DD 2000型可调波长紫外检测器(中国科学院大连化学物理研究所),XWT型记录仪(上海大华仪表厂),pHS 25型酸度计(上海雷磁仪器厂),石英毛细管45cm… 相似文献