Crystal structure and conduction of BICUTIVOX

Existence boundaries, structure, and transport parameters were studied for Bi₄V_{2 ? x} Cu _x/2Ti _x/2O_{11 ? x} solid solutions. Doping levels within x = 0.025–0.15 distort the C2/m crystal lattice (this lattice is characteristic of individual the Bi₄V₂O₁₁ phase) and lowers its symmetry to triclinic. The solid solutions with 0.25 ≤ x ≤ 0.30 crystallize in tetragonal space group I4/mmm. High-temperature X-ray diffraction and dilatometry measurements for Bi₄V_{2 ? x} Cu _x/2Ti _x/2O_{11 ? x} (x ≤ 0.35) solid solutions verified the existence of three structural varieties within 298–1023 K. Electrical conductivity of BICUTIVOX was studied by impedance spectroscopy as a function of temperature, composition, and oxygen partial pressure. Equivalent circuits of cells were analyzed. Features of electrical conductivity versus temperature for the structural varieties are noted. Above 873 K, the solid solutions samples with x = 0.05 have the highest conductivity. At lower temperatures, higher conductivities are in the solid solutions that retain the γ phase in the low-temperature region. The dominant oxygen-ion conduction mechanism was discovered in the solid solutions.     

Specific features of La<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>MnO<Subscript>3</Subscript> solid state synthesis

Investigations of solid state preparation of La_1?xMnO₃ compounds (_x = 0, 0.1, 0.14, 0.17, 0.23) has revealed a number of intermediate structural states connected with progressive ordering of crystal structures. Freshly prepared non-stoichiometric compounds (x ≠ 0) are characterized by Mn⁴⁺ inclusion (0.09 ≤ y(Mn⁴⁺) 0.24) and rhombohedral space group \(R\bar 3c\).     

Systems Li<Subscript>2</Subscript>O(Na<Subscript>2</Subscript>O)-CdO-V<Subscript>2</Subscript>O<Subscript>5</Subscript>: Phase composition and phase diagrams

The subsolidus phase composition of the M₂O-CdO-V₂O₅ systems with M = Li or Na is studied. Double orthovanadates MCdVO₄ and MCd₄(VO₄)₃ form solid solutions of composition Li_{1 ? 2x/3}Cd _x/3CdVO₄ (0 ≤ x ≤ 1, orthorhombic space group Cmcm, modulation at x = 0.6) and Na_{3 ? 2x} Cd_{3 + x} (VO₄)₃ (0 ≤ x ≤ 0.10 and 0.30 ≤ x ≤ 1, orthorhombic space group Cmcm and Pn2₁ a or Pnma, respectively). In the range 0.10 < x < 0.30, the end-members of the solid solutions coexist. Isothermal sections of the systems are mapped.     

Effect of Active Fillers on Properties of Heat-Resistant Composites

The effect of active fillers such as titanium nitrides TiN _x , carbides TiC _x , and carbonitrides TiC _x N _y (0.5 < x or x + y ≤ 1.0) on properties of polymeric composites based on thermostable binders PAIS-104, SFP-012 AK-30, and ED-20 is studied.     

Preparation of mesoporous Ce<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Fe<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2</Subscript> mixed oxides and their catalytic properties in methane combustion

Mesoporous Ce_{1 ? x} Fe _x O₂ mixed oxide catalysts of different molar ratios (x = 0.1–0.5) were prepared by the citric acid sol-gel method and the microwave technique. The activities of Ce_{1 ? x} Fe _x O₂ mixed oxides on methane combustion were investigated, and the structure and reductive properties were characterized by XRD, BET, DRS, and TPR. The data showed that Ce_{1 ? x} Fe _x O₂ mixed oxides prepared were mesoporous material. When x ≤ 0.2, the transition metal Fe incorporated into the lattice of CeO₂ to form cubic Ce_{1 ? x} Fe _x O₂ solid solutions, and mixed phases of cubic Ce_{1 ? x} Fe _x O₂ solid solutions and α-Fe₂O₃ existed when x > 0.2. Ce_{1 ? x} Fe _x O₂ solid solutions show higher activity for methane combustion than pure CeO₂, especially for Ce_0.9Fe_0.1O₂.     

Isomorphic substitution of neodymium and gadolinium for calcium in synthetic hydroxovanadate

Isomorphic substitution of neodymium and gadolinium for calcium in synthetic hydroxovanadate Ca_{5 ? x} M _x (VO₄)₃(OH)_{1 ? x} O _x (M = Nd, Gd) is studied in the range 700–1000°C using X-ray powder diffraction, single-crystal X-ray diffraction (Rietveld technique), and IR spectroscopy. Single-phase solid solutions at 800°C are formed with x ≤ 0.35 for M(III) = Nd and x ≤ 0.3 for M(III) = Gd. With high x, the apatite solid solution coexists with Ca₃(VO₄)₂, Nd₂O₃, and X phases. With increasing x in the homogeneous region, the intensity of the bands of stretching vibrations and librations of OH groups decrease. Single-crystal X-ray diffraction shows that neodymium and gadolinium substitute for calcium in solid solutions mostly in Ca(2) positions.     

Formation of Nd<Subscript>1–<Emphasis Type="Italic">x</Emphasis></Subscript>Bi<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>FeO<Subscript>3</Subscript> Nanocrystals under Conditions of Glycine-Nitrate Synthesis

Nd_1–xBi_xFeO₃ nanocrystals with crystallite size 30?60 nm have been prepared under conditions of glycine–nitrate burning. Single-phase Nd_1–xBi_xFeO₃ nanocrystals are formed over the entire studied concentrations range if the glycine–nitrate synthesis is performed in excess of the oxidizer. Under these conditions, a continuous range of the Nd_1–xBi_xFeO₃ solid solutions (0 ≤ х ≤ 0.75) crystallized in the rhombic system (space group Pbnm) are formed without crystallization of the burning intermediates. The Nd_1–xBi_xFeO₃ solid solutions (х = 0.775, 0.8) crystallize in the rhombic system (space group Pbаm).     

Synthesis and study of solid solutions between cobalt and nickel phosphates with varied degree of anion protonation

Continuous substitutional solid solutions between cobalt and nickel phosphates with varied degree of anion protonation were obtained: Co_1?x Ni _x HPO₄·1.5H₂O and (Co_1?x Ni _x )₃(PO₄)₂·8H₂O, where 0 ≤ x ≤ 1.00. The thermolysis of the solid solutions was studied by the example of Co_1?x Ni _x HPO₄·1.5H₂O. The phases synthesized were compared with the previously described continuous solid solution Co_1?x Ni _x (H₂PO₄)₂·2H₂O.     

Ionic mobility in β-PbF<Subscript>2</Subscript> doped by yttrium and lanthanum fluorides

NMR (¹⁹F, ²⁰⁷Pb) and impedance spectroscopy methods are used to investigate the ionic mobility and conductivity in solid solutions of (1 ? x)PbF₂ ? xMF₃ (where M is Y³⁺ and La³⁺) at 0.05 ≤ x ≤ 0.1. The factors determining the form of ionic movement in these systems and its energy in a range of temperatures from 170 K to 500 K are considered and analyzed. It is found that the solid solutions studied can be related to the class of superionic conductors: their σ value is 2·10^?3 ? 5·10^?3 S/cm at temperatures above 470 K, and the activation energy does not exceed 0.52–0.58 eV.     

Splitting of the <Emphasis Type="Italic">d</Emphasis><Superscript><Emphasis Type="Italic">N</Emphasis></Superscript> atomic states in icosahedral 3<Emphasis Type="Italic">d</Emphasis> metal endofullerenes M@C<Subscript>60</Subscript>

Group-theoretical and quantum-chemical investigations of the spectrum of low-lying excited states have been performed by the ROHF and FCI-RAS (Full CI in Restricted Active Space) methods for 3d metal endofullerenes (MEFs) M@C₆₀ (M =Mn, Cr, and Fe) in different charged states. The major purpose of this study is quantum-chemical verification of the anomalous (“non-Bethe’s”) character of splitting of the d ^N atomic states in an electrostatic field with icosahedral symmetry, predicted previously within the theory of integral invariants theory. The interrelation between the integral invariants theory and the quantumchemical methods applied in this work is considered in detail. Our calculations suggest that the d ^N atomic states in the icosahedral field generated by fullerene C60 (I _h ) on a metal atom (ion) remain non-split for different charged states of the metal and C₆₀. Reasons for this phenomenon and other possible approaches to verification of the prediction are discussed. It is demonstrated that the d ^N states of the encapsulated metal are split in icosahedral 3d MEFs only under very strong compression of these structures.     

Alkali (alkaline-earth) metal,aluminum, and titanium complex orthophosphates: Synthesis and characterization

Phase formation in the A_{1 + x} Al _x Ti_{2 ? x} P₃O₁₂ (A = Li, Na, K, Rb, or Cs; 0 ≤ x ≤ 2.0) and B_{0.5(l + x)}Al _x Ti_{2 ? x} P₃O₁₂ (B = Mg, Ca, Sr, or Ba; 0 ≤ x ≤ 2.0) systems was studied using X-ray powder diffraction, electron probe microanalysis, and IR spectroscopy. The following double and triple orthophosphates were found to exist: A_{1 + x} Al _x Ti_{2 ? x} (PO₄)₃ with A = Li (0 ≤ x ≤ 0.3), Na (0 ≤ x ≤ 1.0), K (x = 0, 1.0, or 2.0), Rb (x = 0, 1.0, or 2.0), or Cs (0 ≤ x ≤ 1.0) and B_{0.5(l + x)}Al _x Ti_{2 ? x} (PO₄)₃ with B = Mg and Ba (x = 0), Ca and Sr (0 ≤ x ≤ 0.2). These orthophosphates crystallize in the structure types of kosnarite, langbeinite, cesium titanium arsenate, potassium aluminum phosphate, or rubidium aluminum phosphate. Their crystal parameters were calculated. For CsTi₂(PO₄)₃ (x = 0), Rietveld refinement was carried out: space group Ia \(\bar 3\) d, Z = 32, a = 19.909(5) Å, V = 7892(1) ų. This compound has a framework structure. The framework is built of TiO₆ octahedra and PO₄ tetrahedra; eight- and 12-coordinated Cs⁺ cations populate interstices.     

X-ray photoelectron spectroscopic study of the interaction of supported metal catalysts with NO<Subscript>x</Subscript>

The reactions of the platinum and rhodium model catalysts applied to aluminum oxide with NO_x (10 Torr NO + 10 Torr O₂) were studied by X-ray photoelectron spectroscopy. The reaction conducted at room temperature formed on the surface of the oxide support the NO _3,s ^? nitrate ions characterized by the N1s line at 407.4 eV and O1s line at 533.1 eV and the NO _2,s ^? nitrite ions characterized by the N1s line with a binding energy of 404.7 eV. At the same time, the Pt4f and Rh3d lines of the supported platinum particles are shifted toward higher binding energies by 0.5–1.0 eV and 0.7–1.2 eV, respectively. It is assumed that the binding energies increase due to changes in the chemical state of the platinum metal in which oxygen is dissolved. The reaction of NO_x with Pt/Al₂O₃ at 200°C forms platinum oxide defined by the Pt4f _7/2 line with a binding energy of 72.3 eV.     

High-temperature properties of new perovskite-like oxides

New complex oxides of composition Pr_1–y Ca _y Fe_{0.5 + x} (Mg_0.25Mo_0.25)_0.5–x O₃, 0.0 ≤ x ≤ 0.1, 0.42 ≤ y ≤ 0.8 having an orthorhombically distorted perovskite structure have been prepared. The thermal expansion and electric conductivity of the new phases have been studied in the temperature range between 100–900°C. The results of our study imply that thin films of the oxides studied can be treated as electrode materials for symmetric solid-oxide fuel cells.     

Preparation,structure, and charge transport characteristics of BIFEVOX ultrafine powders

Existence boundaries, structure, and transport parameters of ultrafine powders were studied in Bi₄V_{2 ? x} Fe _x O_{11 ? x} (BIFEVOX) solid solutions. The details of synthesis of the solid solutions via liquid precursors are analyzed comparatively. In general, BIFEVOX formation via liquid precursors is similar to phase formation in solid-phase synthesis. With low iron levels (x = 0.05–0.1), solid solutions are formed in the monoclinic α phase (space group C2/m) The compositions with x = 0.125 and 0.15 are mixtures of α- and β phases. In the range 0.2 < x < 0.7, the Bi₄V_{2 ? x} Fe _x O_{11 ? x} solid solution has the structure of the γ phase of Bi₄V₂O₁₁ (space group I4/mmm). The β phase in the system in question has a very narrow existence range in the vicinity of x = 0.175. The average particle sizes of the powders prepared by various methods are within 0.5–3 μm. In the powders prepared via liquid precursors, however, the distribution peak shifts toward smaller sizes, to 0.3–1 μm. Mechanical activation conserves the structure of the γ phase of BIFEVOX, and unit cell parameters change only insignificantly; however, the crystal lattice is slightly distorted. The electrical conductivity of BIFEVOX was studied as a function of temperature, preparation technology, and composition using impedance spectroscopy. Equivalent circuits of cells were analyzed. The conductivity of samples prepared by solution technology is always higher than for samples prepared by the solid-phase process. Features of electrical conductivity versus temperature for various phases are noted. All transitions on the conductivity curves match the features of linear thermal expansion curves. Compositions with doping levels x= 0.1–0.3 have the highest total conductivities.     

Films of supersaturated Cd<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Pb<Subscript>1–<Emphasis Type="Italic">x</Emphasis></Subscript>S solid solutions: Composition prognostication,chemical synthesis,microstructure

Working conditions and the concentration regions of the joint precipitation of PbS and CdS at which substitution solid solutions Cd _x Pb_1–x can be formed were determined by calculation of ionic equilibria in the citrate-ammonia reaction mixture at 298 and 353 K with consideration for the conversion fractions of lead and cadmium sulfides into the corresponding sulfides. The hydrochemical precipitation onto glass-ceramic substrates was used to obtain Cd _x Pb_1–x S (0 < x ≤ 0.149) solid solution films with thicknesses of 0.5 to 1.7 μm and high supersaturation with the substituting component. All the films crystallize to form the B1 structure. The phase and elemental compositions and morphological specific features of the films were studied. It was shown that the thickness of the deposited layers is most strongly affected by the process temperature, ammonium hydroxide concentration, and relative amounts of the metal salts in the reaction mixture. It was found that there are oxygen and chlorine in the Cd _x Pb_1–x S solid solutions, and the distribution of these elements across the layer thickness was determined, with the layer-by-layer distribution of chlorine having a pronounced oscillatory nature. It was shown that, as the chemical precipitation temperature is raised, the content of CdS in the substitution solid solutions grows exponentially. The activation energies Ea.ic of the lead and cadmium interchange in the PbS crystal lattice were found to be, depending on the initial concentration of the lead salt, 75.3, 42.8, and 22.2 kJ mol^–1.     

Phase equilibria in the system LaMnO<Subscript>3</Subscript>-SrMnO<Subscript>3</Subscript>-SrCrO<Subscript>4</Subscript>-LaCrO<Subscript>3</Subscript>

A continuous solid solution LaMn_1?y Cr _y O₃ with an orthorhombic structure is found to exist in the range of 0.0 ≤ y ≤ 1.0. An orthorhombic solid solution La_1?x Sr _x CrO₃ exists in the range of 0.0 ≤ x ≤ 0.1. The stability boundaries are determined for the perovskite phase La_1?x Sr _x Mn_1?y Cr _y O₃. An isobaric-isothermal section LaMnO₃-SrMnO₃-SrCrO₄-LaCrO₃ of the system La₂O₃-SrO-Mn₃O₄-Cr₂O₃ in air at 1100°C is designed.     

Use of integrated intensities of X-ray powder diffraction patterns of Mg<Subscript>1 − x</Subscript>Zn<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O solid solutions for the quantitative determination of their composition

X-ray diffraction spectra were obtained for polycrystalline samples of Mg_{1 ? x} Zn _x O solid solutions (x = 0.3, 0.5, 0.6, and 0.7) by X-ray powder diffraction. The theoretical integrated intensity ratio between the 111 and 002 reflections was plotted versus the percentage of zinc in the solid solutions. The possibility of extracting information on polycrystalline samples (the composition and the presence of microstructural features) from comparison of the theoretical and experimental integrated intensity ratios between the 111 and 002 reflections was investigated. The Le Bail procedure for the extraction of integrated intensities from X-ray powder diffraction patterns, followed by the use of these intensities in calculations with the SHELX-97 program package, was tested for the determination of the zinc fraction in polycrystalline samples of Mg_{1 ? x} Zn _x O solid solutions.     

The synthesis and properties of solid solutions based on Ba<Subscript>4</Subscript>Ca<Subscript>2</Subscript>Nb<Subscript>2</Subscript>O<Subscript>11</Subscript>

(Ba_{1 ? x} Ca _x )₆Nb₂O₁₁ solid solutions were synthesized. The compositions were shown to be single-phase at 0.23 ≤ x ≤ 0.47 and have a double perovskite cubic structure with an incomplete oxygen sublattice. The interaction of solid solutions with water vapor and their electrical properties were studied. In dry atmosphere, these complex oxides were mixed oxygen-hole conductors. In humid atmosphere, they intercalated water and exhibited protonic conductivity. The influence of Ba/Ca isovalent substitution, the dynamics of the oxygen sublattice, and the concentration of intercalated water on the value and contribution of protonic and hole conductivity was analyzed.     

Low-temperature phase formation in CaF<Subscript>2</Subscript>–HoF<Subscript>3</Subscript> system

Phase formation in CaF₂–HoF₃ system has been studied by coprecipitation followed by X-ray powder diffraction. Aqueous nitrate solutions have been used as initial substances, while hydrofluoric acid has been employed as fluorinating agent. Formation of hydrated nanophases: solid solution Ca_1–x Ho _x F_{2 + x} (х ≤ 0.1) and HoF3 has been revealed. Dehydration proceeds on heating to 600°C.