Improved phase demodulation for grain orientation measurement

The method of phase demodulation for wood grain orientation measurement has been improved by employing a laser sampling system instead of a laser scanning system and using an edge detection algorithm rather than an intensity detection algorithm. The laser sampling system is able to determine the average grain angle and estimate the wood defect distribution much faster and more accurate than the laser scanning system. The edge detection algorithm is able to transform not only an oriented laser pattern but also an oriented wood texture into a periodic histogram. For the hardwoods with weak tracheid effect but the texture direction indicative of the grain orientation, the orientation measurement of laser pattern can be replaced by the orientation measurement of wood texture.     

Application of passive quadrature phase demodulation for the detection of laser ultrasound

In this paper we describe a laser ultrasound detection scheme based on a new passive phase demodulation technique. Typical laser interferometers suffer from the loss of sensitivity because of phase drifts resulting from the mechanical movements of optical components and normally require closed loop stabilisation control. Through the use of a custom-designed grating mask, the present design completely eliminates the need for any feedback control by simultaneously sampling the interferometer output in the four quadrants of the optical phase circle. The signals are then processed to reproduce the actual waveform of the ultrasound pulse. The operation of the proposed technique is demonstrated through the detection of laser-generated ultrasound waves propagating inside an aluminium block.     

A derivative based simplified phase tracker for a single fringe pattern demodulation

In this paper, a novel fringe demodulation method for the estimation of phase and its first-order derivative from a closed-fringe interferogram is proposed. The proposed method determines the phase derivatives in both x&y directions from fringe orientation and density. The phase derivatives are subsequently used to determine phase values using a novel simplified phase tracker. In the phase tracking model, the complexity of the cost function is reduced using predetermined derivatives so computation time required for phase tracking is reduced considerably. The proposed model is more robust while dealing with saddle points in fringes than the conventional phase tracker model. Hence it does not require any specialized scanning strategy. The proposed method is validated with simulated and experimental fringe patterns (obtained using electronic speckle pattern interferometry and optical holographic interferometry) and a comparison study is carried out with conventional regularized phase tracker. The simulation results show that the proposed method has good accuracy and requires less computation time than existing phase-tracking algorithms. The experimental results demonstrate the robustness of the proposed method against speckle noise and its practical applicability for static and dynamic applications.     

Optical encoder based on Fractional-Talbot effect using two-dimensional phase grating

This work presents an optical encoder that uses a two-dimensional phase grating. Rather than using a four-windowed scanning grating, this design with a special two-dimensional phase index grating generates two sinusoidal signals that are mutually phase-shifted by 180°. Afterwards, two large-areas, specially structured index grating generates the four 90° electrically phase-shifted scanning signals. The special design of the two-dimensional phase index grating provides more accuracy of phase-shift by using the fact that the  + 1 and −1 diffraction orders are intrinsically phase-shifted from one another by 180°. The gap between the phase index grating and mail scale was increased to three quarters of Talbot distance. The tolerance of gap between the index and main grating is 0.1 mm. The tolerance of yaw motion is ± 0.25°.     

基于激光主动探测的“猫眼效应”研究

 针对基于“猫眼效应”的激光主动探测技术在光电对抗中的广泛应用,建立了迎面观瞄光电装置光学系统反光指数数学模型,并结合探测组件建立了探测距离数学模型,模拟了反光指数与内部特性参数间的数值关系及探测距离与迎面观瞄光电装置主要参数间的数值关系。为了验证建立的数学模型的正确性,利用研制的激光主动探测装置,分别以2.5 mm、5.5 mm孔径角镜和25 mm、35 mm、56 mm孔径光电观瞄装置为目标,进行了最大探测距离模拟和验证实验,模拟值分别为1 290 m、1 656 m、866 m、1 919 m、1 226 m,实验值分别达到1 100 m、1 500 m、800 m、1 800 m、1 200 m。结果表明：最大探测距离模拟值和实验值有很好的一致性。     

The influence of high-frequency phase distortion on the phase correction effect in atmospheric turbulence

By using the method of the power-spectrum inversion, the turbulence phase screen has been built up, and the propagation characteristics of high-frequency phase of laser beam in atmospheric turbulence have been analyzed; in addition, the phase correction effect of laser beams by using the adaptive deformable mirror has been simulated, and its affecting factors in turbulence have also been analyzed quantitatively. The results show that the phase correction effect of laser beams in turbulence is mostly determined by the percent of high-frequency phase in distorted wavefront. With the increase of the intensity of atmospheric turbulence and the propagation distance in turbulence, the percent of high-frequency phase in distorted wavefront increases, resulting in the degradation of the phase correction effect.     

基于衍射光栅的FBG传感系统解调算法分析

研究并实现了一种基于衍射光栅的FBG解调系统,针对该解调系统从理论上分析了光纤内的模式分布,分析了由FBG引起的模式间耦合效应。根据高斯光束经过该系统后的空间光强分布,采用多项式拟合的方法实现了反射光谱峰值定位算法。通过与高精度光谱仪的测量结果对比表明,该解调方法具有较高的波长解调精度和稳定性。由于系统中不存在扫描机构,该技术可以实现较高的动态扫描频率。     

基于超声回波重组相位分析的颗粒粒径测量方法

将超声波作用于沉降的颗粒时,由于颗粒的移动,超声回波会出现相位差异。该文通过对测量杯中某一确定深度处的回波信号进行相位分析和重组,发现重组后信号的频率可以计算出粒径;并分别对两种不同粒径分布的聚甲基丙烯酸甲酯(PMMA)微球悬浮液进行了超声波信号采样重组和去噪的实验,实验结果经小波时频方法分析后,证实了颗粒粒径分布与重组信号频率构成的确存在很高的相关性。     

High-frequency phase recovery of distorted wavefront and analysis on phase correction effect

By constructing a distorted wavefront with random phase screen, the correction process of distorted wavefront has been simulated, and the correction effect of deformable mirror has been simulated and analyzed with the method of high-pass filtering. The variations of correction effect and high-frequency phase distortion have been quantitatively analyzed. The results show that the beam quality of the corrected beam degrades obviously with the increase of high-frequency phase. In addition, a new method has been presented to recover the high-frequency phase of distorted wavefront according to the given intensity distribution and low-frequency phase in near field and the intensity distribution in far field. It shows that the method is very effective to recover the high-frequency phase of distorted wavefront.     

Mpemba effect and phase transitions in the adiabatic cooling of water before freezing

In this paper, an accurate experimental investigation of the Mpemba effect (that is, of the fact that initially hot water freezes before the colder one) is carried out, showing that, in the adiabatic cooling of water, relevant roles are played by supercooling, and by phase transitions which take place at 6±1 ^°C,3.5±0.5 ^°C and 1.3±0.6 ^°C. The last transition, which occurs with the non-negligible probability of 0.21 with respect to the total number of runs performed, has not been detected earlier. On the basis of our experimental results, we can present a thorough theoretical analysis of supercooling and of such phase transitions, which are interpreted in terms of the different ordering of molecule clusters in water.     

晶体相场法研究应力状态及晶体取向对微裂纹尖端扩展行为的影响

采用晶体相场模拟研究了单向拉伸作用下初始应力状态、晶体取向角度对单晶材料内部微裂纹尖端扩展行为的影响, 以(111)晶面上的预制中心裂纹为研究对象探讨了微裂纹尖端扩展行为的纳观机理, 结果表明: 微裂纹的扩展行为主要发生在<011>(111)滑移系上, 扩展行为与扩展方向与材料所处的初始应力状态及晶体取向紧密相关. 预拉伸应力状态将首先诱发微裂纹尖端生成滑移位错, 进而导致晶面解理而实现微裂纹尖端沿[011]晶向扩展, 扩展到一定程度后由于位错塞积, 应力集中, 使裂纹扩展方向沿另一滑移方向[101], 并形成锯齿形边缘; 预剪切应力状态下, 微裂纹尖端首先在[101]晶向解理扩展, 并诱发位错产生, 形成空洞聚集型长大的二次裂纹, 形成了明显的剪切带; 预偏变形状态下微裂纹尖端则直接以晶面解理形式[101]在上进行扩展, 直至断裂失效; 微裂纹尖端扩展行为随晶体取向不同而不同, 较小的取向角度会在裂纹尖端形成滑移位错, 诱发空位而形成二次裂纹, 而较大的取向角下的裂纹尖端则以直接解理扩展为主, 扩展方向与拉伸方向几近垂直.     

Optical fiber sensor for temperature measurement based on Silicon thermo-optics effect

A temperature sensor based on the thermo-optics effect of single crystal silicon diaphragm was proposed and studied. The temperature measurement mechanism by using single crystal silicon diaphragm was theoretically analyzed and found the relation between temperature measurement range and the thickness of single crystal diaphragm. It was found that when the temperature changed from 20 °C to 48 °C, the reflected resonant peak wavelength was shifted which was detected by using the dual-wavelength signal demodulation method. Experimental results for temperature measurement demonstrated reasonable linearity and repeatability, related linear regression coefficient of the experimental result is 99.94%. The study would be of utility value for the design and fabrication of silicon-based sensors which were used to measure pressure or the other physical quantities.     

Quasi-reciprocal reflective optical voltage sensor based on Pockels effect with digital closed-loop detection technique

A novel Pockels effect based optical voltage sensor (OVS) consisting of quasi-reciprocal reflective optical circuit is proposed and demonstrated in this paper. The quasi-reciprocal reflective optical circuit is realized so that a digital closed-loop detection technique adopted from fiber gyroscopes can be introduced to obtain the voltage-induced Pockels phase. Due to the digital closed-loop detection scheme, the proposed OVS is insensitive to the fluctuation of the light intensity and the dynamic range is independent of the half-wave voltage of the Pockels crystal compared to the conventional crystal bulk-type with the light intensity based detection scheme. A prototype of the proposed OVS is designed and evaluated. The calculated results of the electric field distribution show that the maximal measured voltage of the sensing element is up to 15 kV. The dc voltage from 0 to 3000 V and 50 Hz ac voltage from 0 to 5000 V are measured with good linearity. The proposed OVS achieves accuracy within ± 1% and ± 0.44% with the measured dc voltage above 800 V and ac voltage above 500 V, respectively. The influences of the alignment error in the sensing element on the measurement accuracy are also theoretically analyzed and experimentally verified.     

一种利用调制光谱形状判断波片快轴方位的新方法

介绍了一种新的判断波片快轴方位的方法.根据波片相位电光补偿测量原理,采用叠加固定频率的交流电压调制信号,获得偏振消光系统输出信息与调制信号间的关系.利用琼斯矩阵对这一过程进行分析发现,输出光信息通常情况下是由基频和倍频信息叠加而成,叠加结果不仅反映了波片的相位信息,而且反映了波片的轴向信息.通过对此现象的深入分析研究,...     

Simultaneous measurement of the phase and group velocities of Lamb waves in a laser-generation based imaging method

This paper describes a novel approach to the simultaneous measurement of the phase and group velocities of Lamb waves based on images of their propagation. The laser-generation based imaging method was first introduced to obtain images of Lamb wave propagation. The time series of snapshot images is used to make a position-time diagram, and the velocities can be estimated based on the slopes of the position curves. Thus, the phase and group velocities can be obtained by measuring the phase advance and energy flow of the Lamb wave, respectively. Details of the principle of simultaneous measurement are presented herein. Experimental verification was also performed in the range of 0.2-3.0 MHz-mm using aluminum plates. The average errors between experiment and theory in the phase and group velocities were 3.31% and 5.68%, respectively.     

基于Pancharatnam-Berry相位和动力学相位调控纵向光子自旋霍尔效应

提出了一种基于Pancharatnam-Berry相位和动力学相位操控纵向光子自旋霍尔效应的方法.理论分析表明:当光场通过一个由Pancharatnam-Berry相位透镜和动力学相位透镜构成的透镜组时,透镜组会存在两个自旋相关的焦点.首先,当左旋和右旋圆偏振光通过微结构相位延迟为π的Pancharatnam-Berry相位透镜时,由于Pancharatnam-Berry相位的自旋相关性,两个圆偏振分量会获得符号相反的Pancharatnam-Berry相位而导致其中一个被聚焦而另一个发散.然后,在Pancharatnam-Berry相位透镜后再插入普通透镜引入动力学相位调制,由于动力学相位是自旋无关,使得这一透镜组,可以在合适的条件下使不同自旋态的光子分别聚焦于纵向上不同焦点处.纵向自旋分裂由两透镜焦距及间距共同决定,因此可以通过改变两个透镜的焦距及其间距获得任意的纵向自旋分裂值.最后,搭建了一套实验装置,所得实验结果与理论结果一致.     

基于普通汞灯光源的横向塞曼效应背景校正大气汞检测方法研究

精确的背景校正决定着冷原子吸收法检测痕量汞的检测下限,研究了基于普通汞灯光源的横向塞曼效应背景校正大气汞检测方法.汞灯光源253.65 nm共振谱线在磁场中垂直于磁场方向产生σ-,σ+和π三个线偏振光.利用超高分辨率光谱仪获取不同磁场强度下汞样品池对σ-,σ+和π线偏振光的吸光度,分析横向塞曼效应背景校正方法所需的最小磁场强度;在1.78 T强磁场强度下,分析了窄带吸收气体苯、宽带吸收气体丙酮对横向塞曼效应背景校正大气汞检测方法可能存在的干扰;利用σ-,σ+作为背景光,π线偏振光作为吸收光,对不同长度的饱和汞蒸气样品池测量,精确背景校正后,吸光度拟合曲线R值达到0.99.实验结果表明基于普通汞灯光源的横向塞曼效应背景校正大气汞检测方法可以实现精确背景校正,能够应用于大气环境痕量汞检测.     

基于剪应力检测的石英微结构及其陀螺效应研究

为了简化石英陀螺结构侧壁上的电极图形,设计了一种基于剪应力检测Coriolis力的新型石英微结构.通过对剪应力检测方案的分析,微结构侧壁电极的极性单一,采用锥度为15°的锥形梁结构作为敏感梁的设计可以增大敏感梁的检测灵敏度.通过各项异性湿法腐蚀z切石英片的方法制造了微结构样件.测试表明样件的驱动频率约为5.6kHz,大气下的品质因子在5000以上.输出信号频谱的谱线存在Coriolis力信号,验证了设计思想的正确性。     

An improved lesion detection approach based on similarity measurement between fuzzy intensity segmentation and spatial probability maps

The application of automatic segmentation methods in lesion detection is desirable. However, such methods are restricted by intensity similarities between lesioned and healthy brain tissue. Using multi-spectral magnetic resonance imaging (MRI) modalities may overcome this problem but it is not always practicable. In this article, a lesion detection approach requiring a single MRI modality is presented, which is an improved method based on a recent publication. This new method assumes that a low similarity should be found in the regions of lesions when the likeness between an intensity based fuzzy segmentation and a location based tissue probabilities is measured. The usage of a normalized similarity measurement enables the current method to fine-tune the threshold for lesion detection, thus maximizing the possibility of reaching high detection accuracy. Importantly, an extra cleaning step is included in the current approach which removes enlarged ventricles from detected lesions. The performance investigation using simulated lesions demonstrated that not only the majority of lesions were well detected but also normal tissues were identified effectively. Tests on images acquired in stroke patients further confirmed the strength of the method in lesion detection. When compared with the previous version, the current approach showed a higher sensitivity in detecting small lesions and had less false positives around the ventricle and the edge of the brain.     

Experimental research in the phase change materials based on paraffin and expanded perlite

In this study, paraffin (PA)/expanded perlite (EP) form-stable phase change material (PCM) was first fabricated using the direct impregnation method without vacuum treatment. Absorptive capacity results showed that the PA/EP composite can obtain good absorptive capacity with the temperature 80 °C and the time 2 h. Compared with the water absorption of EP, the decrease in the water absorption of PA/EP form-stable proved that the absorption of PA into porous EP has been carried out successfully. Scanning electron microscope (SEM) and Fourier transform infrared (FT-IR) results show that paraffin can be well impregnated into EP pores and has good compatibility with it. Differential scanning calorimetry (DSC) results reveal that paraffin/EP composite PCM has melting temperature and latent heat of 53.6 °C and 91.3 J/g, respectively. The durability cycles results suggest that form-stable PA/EP PCM shows good durability.