NiB和NiP超细非晶合金的退火晶化行为及催化性能

 采用X射线吸收精细结构（XAFS）,X射线衍射（XRD）和差热分析（DTA）等方法研究了以化学还原法制备的NiB和NiP超细非晶态合金催化剂在退火过程中的结构变化．XRD结果表明,在300℃下退火时,NiB超细非晶态合金晶化生成纳米晶Ni3B亚稳物相,NiP超细非晶态合金则主要晶化生成金属Ni和部分晶态Ni3P的混合物相;在500℃退火且近于完全晶化的条件下,大部分超细非晶态合金都晶化为金属Ni．XAFS结果定量地说明,对于NiB和NiP初始样品,第一近邻Ni－Ni配位的平均键长Rj分别为0.274和0.271nm,其结构无序度σS很大,分别为0.033和0.028nm,其热无序度σT分别为0.0069和0.0060nm．300℃退火后,晶化生成的Ni3B的Ni－Ni配位的σS降低到初始样品的33％,仅为0.011nm．500℃退火后,NiB样品的结构参数与金属Ni基本一致,但NiP样品的Ni－Ni配位的σS还远大于σT,仍为0.0125nm,表明NiB和NiP超细非晶态合金的退火晶化行为有很大的差别．纳米晶Ni3B催化苯加氢反应的转化率比超细Ni－B非晶态合金或多晶金属Ni更高,表明纳米晶Ni3B中的Ni与B原子组成了苯加氢催化反应的活性中心．     

Ni-P/SiO_2催化剂晶化过程及其加氢活性研究

采用化学还原法制备了负载型Ni－P／SiO2非晶态合金催化剂．应用ICP、BET、氢氧滴定法、XRD、SEM、XPS研究了上述催化剂在高温晶化过程中的表面结构、表面形貌和表面电子态的变化。测定了Ni－P／SiO2非晶态合金晶化前后对其液相苯甲醛加氢反应催化活性和选择性,并讨论了非晶态合金催化剂晶化过程中结构变化对催化性能的影响．     

热处理对化学沉积Ni-Fe-P合金性能的影响

采用DSC和XRD研究了化学镀Ni-Fe-P合金的晶化行为和结构.结果表明,镀态合金呈非晶结构, 367.6 ℃下热处理出现亚稳态Ni5P2(P3)和Fe-Ni(Im3m), 499.2 ℃下热处理进一步晶化为稳定的Ni3P(I-4)和FeNi3(Pm3m).采用磁性能实验和在w=3.5％氯化钠溶液浸泡实验以及阳极极化实验研究了热处理对镀层磁性能和耐腐蚀性的影响.结果表明,该镀层在镀态时几乎没有磁性,随着退火温度的升高,磁性能不断提高. 400 ℃以后,镀层的饱和磁化强度和矫顽力随着退火温度升高而急剧上升.浸泡实验和阳极极化实验结果均表明镀态镀层比经热处理后的镀层在w=3.5％氯化钠溶液中具有更好的耐腐蚀性,但是它们的阳极极化行为不同.     

镍-镧合金的电沉积及其晶化行为与析氢性能

在尿素-溴化钠熔体中电沉积Ni-La合金,考察了合金的沉积行为和阴极电流密度对合金组成和表面形貌的影响。结果表明,镧与镍经过诱导共沉积形成Ni-La合金;随着阴极电流密度的增加,镀层中镧含量先升高后降低（在15 mA·cm^-2条件下达到最高）,镀层表面微粒变大。用热分析技术和X射线衍射研究了Ni89.7La10.3合金的晶化行为,该合金在镀态时呈非晶态结构,在446.1℃热处理后的镀层晶化生成面心立方Ni-La相（Fm3m）。采用电化学技术研究了该镀层的电催化析氢性能,实验证实Ni89.7La10.3合金的电催化析氢性能优于镍。     

低磷化学镀镍层的组成和结构

用SEM、XPS、AES和X-射线衍射法研究了低磷化学镀镍层的形貌、结晶状态、组成元素及其价态和深度分布。结果表明,低磷化学镀镍磷合金层为层状结构,镀态的镀层由低晶态的Ni和Ni_2P组成,350℃热处理1小时后转化为完全晶态的Ni和Ni_3P。镍和磷均为零价态,它们的结合能分别为129.1ev和852.3eV。镀层的真实组成(相对原子百分浓度)为:Ni 85.4%,P 10.1%,O 4.5%。     

退火前后镍钨硼合金电沉积层的结构与性能

采用电化学技术、XPS、DSC、XRD等方法研究Ni W B合金电沉积及热处理前后合金镀层的结构和显微硬度.结果表明,在Ni W B合金电沉积过程中伴随着化学沉积镍等过程以及Na2B4O7在镀层中的夹杂;Ni W和Ni W B合金电沉积层分别表现为纳米晶结构和非晶态结构;热处理过程中合金电沉积层发生晶粒粗化过程以及Ni W B合金镀层发生新相形成过程,产生Ni4W和镍硼化物如Ni2B、Ni3B等沉淀物;400 ℃热处理2 h后Ni W合金镀层有最大的显微硬度达919.8 kg•mm－2,而在500 ℃下Ni W B合金有最大的硬度达1132.2 kg•mm－2.     

Ni-B和Ni-Ce-B超细非晶态合金的退火晶化及其催化性能

 采用XAFS,XRD和DTA方法研究了Ni－B和Ni－Ce－B超细非晶态合金在退火过程中的结构变化及其结构与催化性能的关系．活性结果表明,在退火温度为623K时,Ni－B和Ni－Ce－B样品的苯加氢催化反应转化率最高,分别为63％和81％,0．3％Ce的掺入提高了Ni－Ce－B的催化活性．DTA结果表明,Ni－B超细非晶态合金在598和653K有两个晶化峰,而Ni－Ce－B样品有548,603,696和801K四个晶化峰．XAFS和XRD结果进一步说明,在573K退火时,Ni－B样品晶化生成晶态Ni3B和纳米晶Ni,此时Ni－Ce－B仅有少量晶态Ni3B生成．在673K退火时,Ni－B样品中的Ni3B开始分解生成晶态Ni,同时纳米晶Ni聚集并形成大颗粒晶态Ni,而Ni－Ce－B样品晶化生成晶态Ni3B和纳米晶Ni．在773K和更高的温度退火处理后,Ni－B样品中Ni的局域环境结构与金属Ni箔基本一致,但Ni－Ce－B样品晶化生成的Ni晶格有较大畸变,同时Ni3B并未分解．说明0．3％的Ce对提高Ni－Ce－B样品的稳定性有显著作用．本文首次报道了Ni－B和Ni－Ce－B超细非晶态合金中苯加氢催化活性中心为纳米晶Ni和类似于金属Ni的Ni－B非晶态合金．     

钇对Nd-Fe-Al-Ni非晶合金热稳定性与晶化行为的影响

采用差示扫描量热法（DSC）、X射线衍射（XRD）和透射电镜（TEM）研究了Y对Nd-Fe-Al-Ni非晶合金热稳定性和晶化行为的影响。结果表明,淬火态的Nd60Fe20Al10Ni10-xYx（x=0,2）合金基本为非晶组织同时还含有少量的淬态相,Y的加入抑制了淬态相的析出。加入Y后,非晶合金的晶化开始温度和晶化峰值温度都向高温方向移动,证明其热稳定性提高。Y的加入改变了合金的晶化方式和最终晶化产物,使非晶基体中析出的晶化相更加弥散圆整细小。并且Y具有在化学上钝化氧杂质的作用,从而抑制了氧的有害作用。利用Kissinger方程获得了Nd60Fe20Al10Ni8Y2非晶合金的晶化开始和晶化峰值激活能分别为1.21和1.16 eV。     

EXAFS研究Ni-B和Ni-Ce-B超细非晶态合金的退火晶化

采用同步辐射EXAFS技术定量地研究化学还原法制备的Ni-B和Ni-Ce-B超细非晶态合金中Ni原子的局域环境结构随退火温度升高而产生的变化,结果表明,对于Ni-B和Ni-Ce-B超细非晶态合金初始样品：Ni-Ni最邻近配位壳层的平均键长RNi-Ni、配位数N、热无序σT、结构无序σs分别为0．275nm,11.9.0.0069nm,0.034nm;0.276nm,12.4,0.0067nm,0.035nm,Ni-B最邻近配位壳层的RNi-B,N, σT,σs分别为0．215nm,2.7,0.0055nm,0.0048nm;0.214nm,2.0,0.0058nm,0.0042nm,Ni-Ni配位的σs很大,是其σT的4－5倍,比Ni－B配位的σs大近一个数量级,在300℃退火后,Ni－B样品开始发生晶化生成晶态Ni3B,其RNi-Ni和σs分别为0．254nm和0．011nm,σs降低近2倍;而．3％原子比的Ce掺入后使Ni-Ce-B超细非晶态合金的晶化温度升高100℃左右。在500℃退火后,Ni－B样品的结构参数与Ni箔的相近,但Ni-Ce-B样品中的Ni-Ni配位的σs仍为0．0073nm,Ni-B配位的N为1．2,表明稀土元素Ce（以CeO2)显著增强了Ni与B的相互作用,且同时使退火晶化成的Ni晶结构产生畸变。     

化学镀镍磷合金在浓NaOH溶液中的电化学腐蚀行为

微观结构;腐蚀电化学;化学镀镍磷合金在浓NaOH溶液中的电化学腐蚀行为     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.