Mechanistic study of cerium(IV) oxidation of antimony(III) in aqueous sulphuric acid in the presence of micro amounts of manganese(II) by stopped flow technique

The oxidation of antimony(III) by cerium(IV) has been studied spectrometrically (stopped flow technique) in aqueous sulphuric acid medium. A minute amount of manganese(II) (10⁻⁵ mol dm⁻³) is sufficient to enhance the slow reaction between antimony(III) and cerium(IV). The stoichiometry is 1:2, i.e. one mole of antimony(III) requires two moles of cerium(IV). The reaction is first order in both cerium(IV) and manganese(II) concentrations. The order with respect to antimony(III) concentration is less than unity (ca 0.3). Increase in sulphuric acid concentration decreases the reaction rate. The added sulphate and bisulphate decreases the rate of reaction. The added products cerium(III) and antimony(V) did not have any significant effect on the reaction rate. The active species of oxidant, substrate and catalyst are Ce(SO₄)₂, [Sb(OH)(HSO₄)]⁺ and [Mn(H₂O)₄]²⁺, respectively. The activation parameters were determined with respect to the slow step. Possible mechanisms are proposed and reaction constants involved have been determined.     

Chloride and iodide mediated oxidation of antimony(III) by cerium(IV) in aqueous sulphuric acid medium

The micro amounts of iodide (10⁻⁷) (mol dm⁻³) and chloride (10⁻²) (mol dm⁻³) mediated oxidation of antimony(III) by cerium(IV) in an aqueous sulphuric acid medium have been studied spectrophotometrically at 25 °C and μ = 3.10 mol dm⁻³. The stoichiometry is 1:2 in chloride and iodide mediated reactions. i.e. one mole of antimony(III) requires two moles of cerium(IV). In the case of chloride mediated reaction, the reaction was first order in cerium(IV) and halide concentrations, whereas in the case of iodide mediated reaction the order with respect to [cerium(IV)] was unity and with respect to iodide concentrations was more than unity (ca. 1.4). In both chloride and iodide mediated reactions the order with respect to antimony(III) concentrations was less than unity. Increase in sulphuric acid concentration increased the rate. The order with respect to H⁺ ion concentration was less than unity. Added products, cerium(III) and antimony(V) did not have any significant effect on the reaction rate. The active species of oxidant was understood to be , whereas that of reductant as SbCl₃ in the case of chloride and SbI²⁺ in case of iodide mediated reactions. The possible reaction mechanisms were proposed and the activation parameters were determined and discussed.     

Kinetics of iridium(III) catalyzed oxidation of benzaldehyde and <Emphasis Type="Italic">p</Emphasis>-nitrobenzaldehyde by cerium(IV) in aqueous acidic medium

Oxidation of benzaldehyde and p-nitro-benzaldehyde by cerium(IV) sulphate in aqueous sulphuric acid is strongly catalyzed by iridium(III) chloride. The complex formed between cerium(IV) and the organic substrate in the first equilibrium step gives another complex in the presence of iridium(III), which ultimately gives the corresponding aromatic acids as the product of oxidation. The order of the reaction follows first-order kinetics at low concentrations to zero order at higher concentrations of both the oxidant and organic substrate. The rate is directly proportional to the concentration of catalyst, but decreases sharply with increasing H⁺ ions and cerium(III) concentrations, while change in ionic strength of the medium or the concentration of acetic acid and Cl⁻ ions has no effect on the rate.     

Influence of cerium(IV) and manganese(II) on the oxidation of <Emphasis Type="Italic">D</Emphasis>-galactose by chromium(VI) in the presence of HClO<Subscript>4</Subscript>

The kinetics and mechanism of the oxidation of D-galactose by chromium(VI) in the absence and presence of cerium(IV) and manganese(II) were studied spectrophotometrically in aqueous perchloric acid media. The reaction is first order in both [D-galactose] and [H⁺]. The cerium(IV) inhibits the oxidation path, whereas manganese(II) catalyzes the reactions. The observed inhibitory role of cerium(IV) suggests the formation of chromium(IV) as an intermediate. In the manganese(II) catalyzed path, the D-galactose-manganese(II) complex was considered to be an active oxidant. In this path, the complex forms a ternary chromate ester with chromium(IV) which subsequently undergoes acid catalyzed redox decomposition (one-step three-electron transfer: Indian J. Chem., 2004, vol. 42A, p. 1060; Colloids and Surfaces, 2001, vol. 193, p. 1) in the rate determining step. On the basis of kinetic data, the mechanism of D-galactose oxidation is proposed for parent, the manganese(II) catalyzed and cerium(IV) — inhibited reactions. The activation parameters E _a = 59 kJ ΔH ^# = 57 kJ mol⁻¹, and ΔS ^# = −119 J K⁻¹ mol⁻¹ are calculated and discussed. Reaction products are also examined. Published in Russian in Kinetika i Kataliz, 2009, Vol. 50, No. 1, pp. 90–95. This article was submitted by the authors in English.     

Ruthenium(III)‐mediated oxidation of D‐mannitol by cerium(IV) in aqueous sulfuric acid medium: A kinetic and mechanistic approach

The oxidation of D ‐mannitol by cerium(IV) has been studied spectrophotometrically in aqueous sulfuric acid medium at 25°C at constant ionic strength of 1.60 mol dm^?3. A microamount of ruthenium(III) (10^?6 mol dm^?3) is sufficient to enhance the slow reaction between D ‐mannitol and cerium(IV). The oxidation products were identified by spot test, IR and GC‐MS spectra. The stoichiometry is 1:4, i.e., [D ‐mannitol]: [Ce(IV)] = 1:4. The reaction is first order in both cerium(IV) and ruthenium(III) concentrations. The order with respect to D ‐mannitol concentration varies from first order to zero order as the D ‐mannitol concentration increases. Increase in the sulfuric acid concentration decreases the reaction rate. The added sulfate and bisulfate decreases the rate of reaction. The active species of oxidant and catalyst are Ce(SO₄)₂ and [Ru(H₂O)₆]³⁺, respectively. A possible mechanism is proposed. The activation parameters are determined with respect to a slow step and reaction constants involved have been determined. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 440–452, 2010     

Kinetics and Mechanism of the Oxidation of Some Aldoses by Cerium(IV)

Abstract

The kinetics of oxidation of some aldoses by cerium(IV) have been studied spectrophotometrically in sulphuric acid medium. The reactions are second order; first order with respect to both cerium(IV) and aldose concentration. The reaction rate decreases with increase in sulphuric acid concentration. The mechanisms for the reactions are discussed.     

2-Nitrodiphenylamine as a versatile high-potential reversible oxidation-reduction indicator

The use of 2-nitrodiphenylamine as a reversible indicator has been investigated in the titration of iron(II) with cerium(IV) sulphate, potassium dichromate and sodium vanadate in sulphuric acid media. Accurate results can be obtained with cerium(IV) sulphate in 0.5–5.0 M acid, with potassium dichromate in 5.0–7.0 M acid, and with sodium vanadate in 5.0–7.5 M acid. With cerium(IV) sulphate the titrations are preferably conducted in 2.0 M sulphuric acid or in a 1.0 M. sulphuric acid-1.0 M pechloric acid medium. Tungstic acid, acetic acid, arsenic(III) and manganese(II) do not interfere. In titrations of iron(II) with dichromate and vanadate, the colour changes at the end-point are much more vivid with 2-nitrodiphenylamine than with ferroin.     

铬(III)离子催化铈(IV)离子氧化四氢糠醇的反应动力学及机理

在酸性介质中用氧化还原滴定法研究了铈(IV)离子在铬(III)离子催化作用下, 于25～40 ℃区间氧化四氢糠醇的反应动力学. 结果表明反应对铈(IV)和四氢糠醇均为一级. 准一级速率常数k_obs随催化剂[Cr(III)]增加而增大, 亦随[H^＋]增加而增大, 而随增加而减小. 在氮气保护下, 反应不能引发丙烯酰胺聚合, 说明在反应中没有自由基产生. 提出了催化剂、底物和氧化剂间生成双核加合物的反应机理. 通过k_obs与的依赖关系, 并结合Ce(IV)在溶液中的平衡, 找到了本反应体系的动力学活性物种是Ce(SO₄)₂. 还计算出一些速率常数及相应的活化参数.     

A microelectrode study of the mechanism of the reactions of silver(II) with manganese(II) and chromium(III) in sulphuric acid

The variation of the steady state limiting current for the Ag(I)/Ag(II) oxidation wave with the radius of the microdisc electrode, concentration and temperature has been used to probe the kinetics and mechanisms for the reactions of silver(II) with manganese(II) and chromium(III) in 10 mol dm⁻³ sulphuric acid. It is shown that the current density for the silver(I) mediated oxidation of manganese(II) is controlled by the diffusion of manganese(II) to the surface except for microelectrodes with radii below 5 μm. On the other hand, the current density for the mediated oxidation of chromium(III) is determined by the rate of the Ag(II)/Cr(III) reaction over a range of conditions. In contrast to the Ag(II)/water reaction, its kinetics can be fitted to a mechanism where the initial electron transfer from Cr(III) to the Ag(II) is the rate determining step.     

Heterogeneous water oxidation by bidentate Schiff base manganese complexes in the presence of cerium(IV) ammonium nitrate

Oxygen evolution was observed upon mixing solid manganese(III) bidentate Schiff base complexes with aqueous solutions of cerium(IV) ammonium nitrate. However, oxygen evolution was not observed upon mixing solutions of the complexes (in acetonitrile) with Ce(IV). Electron-withdrawing substituents on the Schiff base ligands (NO₂, Br) enhanced the reactivity of the manganese complexes toward oxygen evolution. Oxygen evolution was also affected by R groups on the ligands, in the order Me > Et ≫ Bz. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Amperometric ascorbimetric determination of cerium(IV) and Iron(III) with two polarized electrodes

Summary Amperometric ascorbimetric determinations of cerium(IV) and ferric iron have been carried out at 50°C with two polarized electrodes at 200 and 100 mV respectively. The results obtained are fairly accurate and precise within ±1.0 per cent. A simple method for successive determination of cerium and iron has been developed; and conditions for such estimations have been established. At an acidity of 2.5 M with respect to sulphuric acid, it is possible to ward off the reduction of ferric iron and thereby cerium(IV) is successfully titrated with ascorbic acid in this medium. After completion of the reaction and then lowering the acid concentration to p_H 1.5 with aid of ammonium hydroxide, Fe^III is titrated with standard ascorbic acid yielding good results.     

N-oxides of 4-(5-nonyl)pyridine and trioctylamine as extractants for cerium(IV) and its separation from thorium(IV)

Trace level cerium has been oxidized to the quadrivalent state with potassium dichromate and shown to be preferentially extracted from very dilute mineral acid solutions and also from moderate nitric acid media by 0.1M solutions of 4-(5-nonyl)pyridine oxide and trioctylamine oxide dissolved in xylene. The dependence of extraction on the type of N-oxide, acid concentration and the N-oxide concentration has been investigated. The influence of the concentration of salting-out agents is described. Separation factors for a number of metal ions relative to cerium(IV) are reported for 0.1 M 4-(5-nonyl)pyridine oxide/xylene-0.1M sulphuric acid system. The ratio of the D for Ce(IV) to that of Ce(III) is greater than 10⁵, and the D for Ce(IV) is much greater than that for thorium(IV). Separation of cerium(IV) from thorium has been achieved from 0.1M sulphuric acid solutions using 0.1M 4-(5-nonyl)pyridine oxide/xylene as an extractant.     

Oxidation of L-aspartic acid and L-glutamic acid by manganese(III) ions in aqueous sulphuric acid,acetic acid,and pyrophosphate media: A kinetic study

Kinetics of oxidation of L-aspartic acid and L-glutamic acid by manganese(III) ions have been studied in aqueous sulphuric acid, acetic acid, and pyrophosphate media. Manganese(III) solutions were prepared by known electrolytic/chemical methods in the three media. The nature of the oxidizing species present in manganese(III) solutions was determined by spectrophotometric and redox potential measurements. The reaction shows a variable order in [manganese(III)]_o: the order changes from two to one as the reactive oxidizing species changes from an aquo ionic form to a complex form. There is a first-order dependence of the rate on [amino acid]_o in all the three media while the other common features include an inverse dependence each on [H⁺] and on [manganese(II)]. Effects of varying ionic strength and solvent composition were studied. Added anions such as pyrophosphate, fluoride, or chloride alter the reaction rate and mechanism by changing the formal redox potential of Mn(III)-Mn(II) couple. Activation parameters have been evaluated using the Arrhenius and Eyring plots. Mechanisms consistent with the kinetic data have been proposed and discussed. © 1995 John Wiley & Sons, Inc.     

Mechanistic Study of Oxidation of Palladium(II) by Cerium(IV) in Aqueous Acid

The kinetics of oxidation of Pd^II by Ce^IV have been studied spectrophotometrically in HClO₄ media at 40 °C. The reaction is first order each in [Ce^IV] and [Pd^II] at constant [H⁺]. Increasing [H⁺] accelerates the reaction rate with fractional order in [H⁺]. The initially added products, palladium(IV) and cerium(III) do not have any significant effect on the reaction rate. At constant acidity, increasing the added chloride concentration enhances the rate of reaction. H₃Ce(SO₄)₄⁻ and PdCl₄²⁻ are the active species of oxidant and reductant respectively. The possible mechanisms are proposed and the reaction constants involved have been determined.     

Potentiometric flow injection determination of manganese(II) by using a hexacyanoferrate(III)-hexacyanoferrate(II) potential buffer

A highly sensitive potentiometric flow injection analysis method for the determination of manganese(II), utilizing a redox reaction with hexacyanoferrate(III) in near neutral media containing ammonium citrate is described. The analytical method is based on the detection of the change in potential of a flow-through type redox electrode detector, resulting from the composition change of an [Fe(CN)₆]³⁻-[Fe(CN)₆]⁴⁻ potential buffer solution. A linear relationship between the potential change (peak height) and the concentration of manganese(II) was found. Manganese(II) in a wide concentration range from 10⁻⁴ to 10⁻⁷ M could be determined by appropriately altering the concentration of the potential buffer from 10⁻³ to 10⁻⁵ M. The lower detection limit of manganese(II) was determined to be 1×10⁻⁷ M. The sampling rate and relative standard deviation were 20 h⁻¹ and 1.9% (n=8) for 6×10⁻⁶ M manganese(II), respectively. The proposed method was successfully applied to the determination of manganese(II) in actual soil samples obtained from tea fields. Analytical results obtained by the proposed method were in good agreement with those obtained by an atomic absorption spectrophotometric method.     

Kinetic study of the Ce(III)‐, Mn(II)‐, or ferroin‐catalyzed Belousov‐Zhabotinsky reaction with pyruvic acid

The Ce(III)‐, Mn(II)‐, or ferroin (Fe(phen)₃²⁺)‐catalyzed reaction of bromate ion and pyruvic acid (PA) or its dimer exhibits oscillatory behavior. Both the open‐chain dimer (parapyruvic acid, γ‐methyl‐γ‐hydroxyl‐α‐keto‐glutaric acid, DPA1) and the cyclic‐form dimer (α‐keto‐γ‐valerolactone‐γ‐carboxylic acid, DPA2) show more sustained oscillations than PA monomer. Ferroin behaves differently from Ce(III) or Mn(II) ion in catalyzing these oscillating systems. The kinetics of reactions of PA, 3‐brompyruvic acid (BrPA), DPA1, or DPA2 with Ce(IV), Mn(III), Fe(phen)₃³⁺ ion were investigated. The order of relative reactivity of pyruvic acids toward reaction with Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion is DPA2 > DPA1 > BrPA > PA and that of metal ions toward reaction with pyruvic acids is Mn(III) > Ce(IV) > Fe(phen)₃³⁺. The rates of bromination reactions of pyruvic acids are independent of the concentration of bromine and the order of reactivity toward bromination is (DPA1, DPA2) > BrPA > PA. Experimental results are rationalized. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 408–418, 2000     

Iridium(III) catalyzed oxidation of cyclic ketones by cerium(IV)

IrCl₃which is considered to be a sluggish catalyst in alkaline media, was found to surpass the catalytic efficiency of even osmium and ruthenium in acidic media in the oxidation of cyclopentanone and 2-methylcyclohexanone by cerium(IV) sulphate in aqueous sulphuric acid medium. It was observed that the order of the reaction shows direct proportionality with respect to low concentrations of the oxidant and alcohols, but tends to become independent of concentration at higher concentrations. On increasing the concentrations of externally added Cl^-, H⁺ and Ce^IIIions, the rate of the reaction decreases sharply initially but the decrease in rate becomes less prominent as their concentration is increased. The rate of reaction is directly proportional with respect to IrCl₃concentrations. Kinetic data suggest that the production of Ce^III ion occurs before the rate-determining step. Parameters such as the energy of activation, free energy of activation and entropy data collected at five different temperatures suggest that cyclopentanone forms the activated complex more easily.     

Kinetic study of the Ce(III)‐, Mn(II)‐ or Fe(phen)32+‐catalyzed Belousov–Zhabotinsky reaction with ethyl hydrogen malonate

In a stirred batch reaction, Fe(phen)₃²⁺ ion behaves differently from Ce(III) or Mn(II) ion in catalyzing the bromate‐driven oscillating reaction with ethyl hydrogen malonate [CH₂COOHCOOEt, ethyl hydrogen malonate (EHM)]. The effects of N₂ atmosphere, concentrations of bromate ion, EHM, metal ion catalyst, sulfuric acid, and additive (bromide ion or bromomalonic acid) on the pattern of oscillations were investigated. The kinetic study of the reaction of EHM with Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion indicates that under aerobic or anaerobic conditions the order of reactivity toward reacting with EHM is Mn(III) > Ce(IV) ≫ Fe(phen)₃³⁺, which follows the same trend as that of the malonic acid system. The presence of the ester group in EHM lowers the reactivity of the two methylene hydrogen atoms toward bromination or oxidation by Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion. No good oscillations were observed for the BrO₃₋‐CH₂(COOEt)₂ reaction catalyzed by Ce(III), Mn(II), or Fe(phen)₃²⁺ ion. A discussion of the effects of oxygen on the reactions of malonic acid and its derivatives (RCHCOOHCOOR′) with Ce(IV), Mn(III), or Fe(phen)₃³⁺ ion is also presented. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 52–61, 2000     

Thermoanalytical studies of oxovanadium(IV)hydroxamate complexes

The thermal decomposition behavior of oxovanadium(IV)hydroxamate complexes of composition [VO(acac)(C₆H₅C(O)NHO)] (I), [VO(C₆H₅C(O)NHO)₂] (II), [VO(acac)(4-ClC₆H₄C(O)NHO)] (III), [VO(4-ClC₆H₄C(O)NHO)₂] (IV) (where acac = (CH₃COCHCOCH₃ ^–) synthesized from the reactions of VO(acac)₂ with equi- and bimolar amounts of potassium benzohydroxamate and potassium 4-chlorobenzohydroxamate in THF + MeOH solvent medium has been studied by TG and DTA techniques. TG curves indicated that complexes I, II, and IV undergo decomposition in single step to yield VO₂ as the final residue, while complex III decomposes in two steps to yield VO(acac) as the likely intermediate and VO₂ as the ultimate product of decomposition. The formation of VO₂ has been authenticated by IR and XRD studies. From the initial decomposition temperatures, the order of thermal stability for the complexes has been inferred as IV > I > III > II.     

Micellar catalysis on the redox reaction of glycolic acid with chromium(VI)

Chromium(VI) oxidation of glycolic acid in the absence and presence of cetyltrimethylammonium bromide (CTAB) and cetylpyridinium bromide (CPB) followed the same mechanism as shown by kinetic study. The reaction followed second‐order kinetics, first‐order in each reactant. The oxidation is strongly catalyzed by manganese(II) and cationic micelles of CTAB or CPB. The catalytic effect of micelles can be fitted to a model in which the reaction rate depends upon the concentration of both reactants in the micellar pseudophase. Some added inorganic salts (NaCl, NaBr, NaNO₃, and Na₂SO₄) reduce the micellar catalysis by excluding glycolic acid from the reaction site. The reactivity of glycolic acid towards chromium(VI) has been discussed and also compared with those obtained previously for the reaction between chromium(VI) and the reductants oxalic and lactic acids. On the basis of the observed results, probable mechanisms have been proposed. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 377–386, 2001