De‐agglomeration of Silica Nanoparticles in the Presence of Surfactants

The effect of the type of surfactant and pH on de‐agglomeration of a hydrophilic silica nano‐powder in a high shear mixer was investigated. It has been found that the presence of surfactant does not affect the general pattern of de‐agglomeration characterized by the transition of a single modal aggregates size distribution with the median of 10 µm, through a bi‐modal distributions with the second median of the order of 100 nm to a single modal distribution with the median of the order of 100 nm. None of the investigated surfactants enabled de‐agglomeration of the nano‐powder into a primary nanoparticle.

At pH=4, breakage of large secondary aggregates was enhanced by the addition of PEG and PVP, whereas the addition of SDS slowed down de‐agglomeration. The final aggregates were larger in all suspensions containing surfactant than in surfactant free suspensions. At pH=9 all surfactants drastically reduced de‐agglomeration rate without affecting the size of the primary aggregates. PEG induced bridge flocculation of the primary aggregates leading to a drastic change of the rheology of suspension.     

Composite Worm‐Like Aggregates Formed from a Pair of Block‐Copolymers Containing Hydrogen‐Bonding Donor and Acceptor

Worm‐like aggregates with a PAA/P4VP complex core and a PEG/PNIPAM mixed shell were prepared in ethanol by the comicellization of poly(ethylene glycol)‐block‐poly(acrylic acid) (PEG‐b‐PAA) and poly(N‐isopropylacrylamide)‐block‐poly(4‐vinylpyridine) (PNIPAM‐b‐P4VP) through hydrogen‐bonding. The formed aggregates were studied by dynamic light scattering, static light scattering, ¹H NMR, and transmission electron microscopy. The length of worm‐like aggregates could be adjusted by changing the weight ratio of W(PNIPAM‐b‐P4VP)/W(PEG‐b‐PAA). When the ratio changed from 20 to 150%, the length changed from about 100 nm to several microns, and the diameter stayed almost unchanged at about 15 nm.

     

Revealing structure formation in PCPDTBT by optical spectroscopy

The low‐bandgap polymer poly{[4,4‐bis(2‐ethylhexyl)‐cyclopenta‐(2,1‐b;3,4‐b′)dithiophen]‐2,6‐diyl‐alt‐(2,1,3‐benzo‐thiadiazole)?4,7‐diyl} (PCPDTBT) is widely used for organic solar cell applications. Here, we present a comprehensive study of the optical properties as a function of temperature for PCPDTBT in solution and in thin films with two distinct morphologies. Using absorption and photoluminescence spectroscopy as well as Franck‐Condon analyses, we show that PCPDTBT in solution undergoes a phase transformation at 300 K from a disordered to a truly aggregated state on cooling. The saturation value of aggregates in solution is reached in PCPDTBT thin films at any temperature. In addition, we demonstrate that the photophysical properties of the aggregates in films are similar to those in solution and that a low percentage of thermally activated excimer states is present in the films at temperatures above 200 K. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1416–1430     

Dual Aggregation Behavior of Porphyrin‐Cored Thiophene Dendrimers

Two porphyrin‐cored thiophene dendrimers T(3T)P and T(7T)P have been successfully synthesized and characterized by UV‐vis and fluorescence measurements. The self‐assembly of these two water‐insoluble free base porphyrins to form both intrinsic H‐ and J‐aggregates has been reported for the first time. This intrinsic behavior is in contrast to the use of surfactants, dyes, and metal ions to induce aggregation behavior on most porphyrin systems. This work emphasizes the importance of controlling the size, solvent, and extent of conjugation of polythiophene dendron groups in porphyrin systems. These materials may yet be applied to polythiophene or porphyrin blend system in energy conversion devices with the light‐harvesting properties of the polythiophene dendrons.

     

Structure‐Transport Relationship of Dendritic Core‐Shell Nanocarriers for Polar Dyes

TriPEGylated functionalized dendritic poly(ethylene imines) were synthesized and their transportation properties for rose Bengal (up to 50 guests per dendrimer) were evaluated. A critical aggregation concentration was observed, demonstrating the formation of aggregates among the dendrimers. The structure‐activity relationships show that their encapsulation capacities were dependent linearly on the density of the PEG shell, either as PEG length or degree of functionality, which confirmed that the PEG chains play a predominant role in the encapsulation process. It further gives some insights that the guest molecules appeared to be predominantly located in the PEG shell rather than in the core.

     

Raspberry‐Like Aggregates Containing Secondary Nanospheres of Polystyrene‐block‐poly(4‐vinylpyridine) Micelles

Summary: Raspberry‐like aggregates containing secondary nanospheres were studied. The formation of raspberry‐like aggregates was due to complexation between core‐shell microspheres and core‐corona micelles. The core‐shell microspheres were synthesized with soap‐free polymerization of styrene and methyl acrylic acid, which included carboxyl groups in the periphery. The micelles were self‐assembled by polystyrene‐block‐poly(4‐vinylpyridine), which contained pyridine groups in the corona. The driven force to form raspberry‐like aggregates was due to the affinity between the carboxyl and pyridine groups. The morphology of the raspberry‐like aggregates could be tuned by changing the ratio of the microspheres to micelles. IR measurements suggested that the raspberry‐like aggregates were like zwitterions.

TEM image of the raspberry‐like aggregates formed at a molar ratio of MAA to 4VP at 1:4.     

Magnetochiral effects in amphiphilic porphyrin J-aggregates

The detection of magnetochiral dichroism (MChD; CD: circular dichroism) in a suspension of J-aggregate particles of an achiral amphiphilic nonmetalated porphyrin renews the interest for porphyrins in supramolecular chemistry and reinforces the concept that novel advanced materials can be obtained through self-assembly and auto-organization processes (see picture).     

Chiral J‐Aggregates of Atropo‐Enantiomeric Perylene Bisimides and Their Self‐Sorting Behavior

Herein we report on structural, morphological, and optical properties of homochiral and heterochiral J‐aggregates that were created by nucleation–elongation assembly of atropo‐enantiomerically pure and racemic perylene bisimides (PBIs), respectively. Our detailed studies with conformationally stable biphenoxy‐bridged chiral PBIs by UV/Vis absorption, circular dichroism (CD) spectroscopy, and atomic force microscopy (AFM) revealed structurally as well as spectroscopically quite different kinds of J‐aggregates for enantiomerically pure and racemic PBIs. AFM investigations showed that enantiopure PBIs form helical nanowires of unique diameter and large length‐to‐width ratio by self‐recognition, while racemic PBIs provide irregular‐sized particles by self‐discrimination of the enantiomers at the stage of nucleation. Steady‐state fluorescence spectroscopy studies revealed that the photoluminescence efficiency of homochiral J‐aggregated nanowires (47±3 %) is significantly higher than that of heterochiral J‐aggregated particle‐like aggregates (12±3 %), which is explained in terms of highly ordered molecular stacking in one‐dimensional nanowires of homochiral J‐aggregates. Our present results demonstrate the high impact of homochirality on the construction of well‐defined nanostructures with unique optical properties.     

Synthesis of a Novel Electroactive ABA Triblock Copolymer and its Spontaneous Self‐Assembly in Water

An electroactive triblock copolymer of poly(ethylene glycol) (PEG) and aniline pentamer (AP), PEG‐block‐AP‐block‐PEG (PAP), was synthesized via polycondensation in the presence of N,N'‐dicyclohexylcarbodiimide (DCC). The UV‐vis spectra and cyclic‐voltammograms (CV) spectra exhibited an excellent electroactivity of the triblock copolymer. The amphiphilic triblock copolymer self‐assembles spontaneously into uniform micellar aggregates when the triblock copolymer was added directly to the aqueous solution. The size of the aggregates can be changed with the oxidation state of the AP segment in the PAP copolymer and the aggregates were pH‐sensitive to the surrounding water solution, which provides a potential application in controlled drug release.

     

Entrapment of amino acids in gas phase surfactant assemblies: The case of tryptophan confined in positively charged (1R,2S)‐dodecyl (2‐hydroxy‐1‐methyl‐2‐phenylethyl) dimethylammonium bromide aggregates

The ability of positively charged aggregates of the surfactant (1R ,2S )‐dodecyl(2‐hydroxy‐1‐methyl‐2‐phenylethyl)dimethylammonium bromide (DMEB) to incorporate D‐tryptophan or L‐tryptophan in the gas phase has been investigated by electrospray ion mobility mass spectrometry (ESI‐IM‐MS). Strongly impacted by the pH of the electrosprayed solutions, both protonated (T⁺) and deprotonated (T⁻) tryptophan are effectively included into the aggregates, whereas, tryptophan in zwitterionic (T⁰) form is practically absent in singly charged DMEB aggregates but can be found in multiply charged ones. The ability to incorporate tryptophan increases with the aggregation number and charge state of aggregates. More than 1 tryptophan species can be entrapped (aggregates including up to 5 tryptophan are observed). Collision induced dissociation experiments performed on the positively singly charged DMEB hexamer containing 1 T⁻ show that at low collision energies the loss of a DMEB molecule is preferred with respect to the loss of the DMEB cation plus T⁻ species which, in turn, is preferred with respect to the loss of mere tryptophan, suggesting that the deprotonated amino acid is preferentially located in proximity of a DMEB head group and with the ionic moiety pointing towards the core of the aggregate. The analysis of the collision cross sections (CCS) of bare and tryptophan containing aggregates allowed evaluating the contributions of tryptophan and bromide ions to the total aggregate CCS. No significant discrimination between D‐tryptophan and L‐tryptophan by the chiral DMEB aggregates has been evidenced by mass spectra data, CID experiments, and CCS values.     

Polariton Dynamics under Strong Light–Molecule Coupling

We present a comprehensive experimental study of the photophysical properties of a molecule–cavity system under strong coupling conditions, using steady‐state and femtosecond time‐resolved emission and absorption techniques to selectively excite the lower and upper polaritons as well as the reservoir of uncoupled molecules. Our results demonstrate the complex decay routes in such hybrid systems and that, contrary to expectations, the lower polariton is intrinsically long‐lived.     

Homo‐ and Heterovalent Polynuclear Cerium and Cerium/Manganese Aggregates

Reactions of Ce^III(NO₃)₃?6 H₂O or (NH₄)₂[Ce^IV(NO₃)₆] with Mn‐containing starting materials result in seven novel polynuclear Ce or Ce/Mn complexes with pivalato (^tBuCO ) and, in most cases, auxiliary N,O‐ or N,O,O‐donor ligands. With nuclearities ranging from 6–14, the compounds present aesthetically pleasing structures. Complexes [Ce^IV₆(μ₃‐O)₄(μ₃‐OH)₄(μ‐O₂C^tBu)₁₂] ( 1 ), [Ce^IV₆Mn^III₄(μ₄‐O)₄(μ₃‐O)₄(O₂C^tBu)₁₂(ea)₄(OAc)₄]?4 H₂O?4 MeCN (ea^?=2‐aminoethanolato; 2 ), [Ce^IV₆Mn^III₈(μ₄‐O)₄(μ₃‐O)₈(pye)₄(O₂C^tBu)₁₈]₂[Ce^IV₆(μ₃‐O)₄(μ₃‐OH)₄(O₂C^tBu)₁₀(NO₃)₄] [Ce^III(NO₃)₅(H₂O)]?21 MeCN (pye^?=pyridine‐2‐ethanolato; 3 ), and [Ce^IV₆Ce^III₂Mn^III₂(μ₄‐O)₄(μ₃‐O)₄(^tbdea)₂(O₂C^tBu)₁₂(NO₃)₂(OAc)₂]?4 CH₂Cl₂ (^tbdea^2?=2,2′‐(tert‐butylimino]bis[ethanolato]; 4 ) all contain structures based on an octahedral {Ce^IV₆(μ₃‐O)₈} core, in which many of the O‐atoms are either protonated to give (μ₃‐OH)^? hydroxo ligands or coordinate to further metal centers (Mn^III or Ce^III) to give interstitial (μ₄‐O)^2? oxo bridges. The decanuclear complex [Ce^IV₈Ce^IIIMn^III(μ₄‐O)₃(μ₃‐O)₃(μ₃‐OH)₂(μ‐OH)(bdea)₄(O₂C^tBu)_9.5(NO₃)_3.5(OAc)₂]?1.5 MeCN (bdea^2?=2,2′‐(butylimino]bis[ethanolato]; 5 ) contains a rather compact Ce^IV₇ core with the Ce^III and Mn^III centers well‐separated from each other on the periphery. The aggregate in [Ce^IV₄Mn^IV₂(μ₃‐O)₄(bdea)₂(O₂C^tBu)₁₀(NO₃)₂]?4 MeCN ( 6 ) is based on a quasi‐planar {Mn^IV₂Ce^IV₄(μ₃‐O)₄} core made up of four edge‐sharing {Mn^IVCe^IV₂(μ₃‐O)} or {Ce^IV₃(μ₃‐O)} triangles. The structure of [Ce^IV₃Mn^IV₄Mn^III(μ₄‐O)₂(μ₃‐O)₇(O₂C^tBu)₁₂(NO₃)(furan)]?6 H₂O ( 7 ?6 H₂O) can be considered as {Mn^IV₂Ce^IV₂O₄} and distorted {Mn^IV₂Mn^IIICe^IVO₄} cubane units linked through a central (μ₄‐O) bridge. The Ce₆Mn₈ equals the highest nuclearity yet reported for a heterometallic Ce/Mn aggregate. In contrast to most of the previously reported heterometallic Ce/Mn systems, which contain only Ce^IV and either Mn^IV or Mn^III, some of the aggregates presented here show mixed valency, either Mn^IV/Mn^III (see 7 ) or Ce^IV/Ce^III (see 4 and 5 ). Interestingly, some of the compounds, including the heterovalent Ce^IV/Ce^III 4 , could be obtained from either Ce^III(NO₃)₃?6 H₂O or (NH₄)₂[Ce^IV(NO₃)₆] as starting material.     

High Excimer‐State Emission of Perylene Bisimides and Recognition of Latent Fingerprints

High excimer‐state emission in the H‐type aggregate of a novel asymmetric perylene bisimide derivative, 6 , with triethyleneglycol chains and lactose functionalization was achieved in water. Furthermore, its application for enhancing the visualization of transfer latent fingerprints from glass slides to the poly(vinylidene fluoride) (PVDF) membrane was explored, which showed clear images of the latent fingerprint in daylight and under 365 nm ultraviolet illumination.