Rapid analysis of a plasmid by hydrophobic-interaction chromatography with a non-porous resin

A HPLC technique has been developed, based on hydrophobic-interaction Chromatography with a non-porous packing (TSKgel Butyl-NPR, Tosoh Biosep LLC), that allows separation of the open circular (nicked) and supercoiled forms of five DNA plasmids, ranging in size from 4 to 30 kilo base pairs (kb). The identity of the bands was determined through light scattering and gel electrophoresis. Several buffers, gradients, flow-rates and temperatures were evaluated in determining the optimum operating conditions for the separation. For all plasmids a reversed ammonium sulfate in phosphate buffer (pH 7.1) gradient was established. The chromatographic resolution between the supercoiled and nicked peaks was found to be a function of flow-rate and temperature. The resolution and the elution order did not vary with plasmid size, with the open-circular form always being eluted before the supercoiled form. Hydrophobic-interaction chromatography is a useful alternative to ion exchange or size exclusion for the chromatography of large plasmids, up to 30 kb.     

超支化聚合物化学键合毛细管电泳柱的制备及其对蛋白质的分离行为

分别合成了以三羟甲基丙烷和季戊四醇为核的超支化聚(胺-酯),并对其进行了红外测定、羟值测定、粘度测定等表征。采用化学键合方法将其涂于毛细管内壁,并测定涂层柱的电渗流以及对碱性蛋白质的分离能力,结果表明,涂层柱能有效地抑制碱性蛋白质在毛细管内壁上的吸附,大大降低电渗流;以三羟甲基丙烷为核的超支化聚(胺-酯)涂层柱的塔板数达105/m,而以季戊四醇为核的超支化聚(胺-酯)涂层柱的分离柱效更高,塔板数达107/m。实验结果表明这两类涂层柱都具有较好的分离效果和稳定性。     

Novel dynamic polymer coating for capillary electrophoresis in nonaqueous methanolic background electrolytes.

Coated capillaries can be advantageous in many capillary electrophoretic applications where nonaqueous background electrolytes are used. In the present work, a new dynamic polymer coating (poly(glycidylmethacrylate-co-N-vinylpyrrolidone)) for methanol-based background electrolytes is introduced. The magnitude and stability of electroosmotic flow was investigated with coated capillaries at pH* values of 3, 7.8, and 10.4 in methanol. At pH* 7.8 and 10.4 the electroosmotic flow was negligible and repeatable. On the other hand, at pH* 3 a weak, unstable electroosmotic flow was observed, due to a change in the conformation of the polymer under acidic conditions. The dynamically coated capillaries were successfully applied to the separations of cationic drugs, phenols, and benzoic acids. The synthesis and characterization of the polymer are described in detail.     

Capillary zone electrophoresis on chemically bonded imidazolium based salts

In the present paper, fused-silica capillaries were chemically modified with an analogue of the imidazole-based ionic liquid and zwitterionic salt. The coated capillaries were examined for the behavior of the electroosmotic flow in both aqueous and non-aqueous electrolytes. The electroosmotic flow in the capillary coated with an ionic liquid analogue was found to be anodic (reversed) and dependent on the pH of the separation buffer. In the case of a zwitterionic capillary, the electroosmotic flow was cathodic and its velocity remained almost constant in the pH range of 4-7. The zeta-potentials of the modified surfaces were also calculated. The effectiveness of coating was investigated by comparing a separation of five inorganic ions and seven alkylphosphonic acids/monoesters in the modified and uncoated capillaries. All separations were successfully carried out in simple buffers and completed during a short analysis time. Finally, the run-to-run and day-to-day reproducibility of the coated capillaries in terms of the migration time of a neutral marker was determined.     

Quaternary ammonium substituted agarose as surface coating for capillary electrophoresis

A novel positively charged polymer of quaternary ammonium substituted agarose (Q-agarose) has been synthesized and explored for use as a coating in capillary electrophoresis. The fast and simple coating procedure is based on a multi-site electrostatic interaction between the polycationic agarose polymer and the negatively charged fused-silica surface. By simply flushing fused-silica capillaries with hot polymer solution a positively charged, hydrophilic deactivation layer is achieved. The polymer surface provides an intermediate electroosmotic flow of reversed direction, over a range of pH 2-11, compared to unmodified fused-silica. The coating procedure was highly reproducible with an RSD of 4%, evaluated as the electroosmotic flow mobility for 30 capillaries prepared at 10 different occasions. The application of Q-agarose coated capillaries in separation science was investigated using a set of basic drugs and model proteins and peptides. Due to the intermediate electroosmotic flow generated, the resolution of basic drugs could be increased, compared to using bare fused-silica capillaries. Moreover, the coating enabled separation of proteins and peptides with efficiencies up to 300.000 plates m(-1).     

金纳米微粒修饰毛细管电泳分离蛋白质的研究

报道了金纳米微粒(Au NP)修饰毛细管电泳分离蛋白质的方法.采用物理吸附法将Au NP修饰在熔融石英毛细管内表面,制备成Au NP修饰毛细管.探讨了修饰剂Au NP的浓度对电渗流及蛋白质分离的影响.结果表明,Au NP修饰的毛细管能有效地抑制电渗流及蛋白质在毛细管内壁上的吸附,提高分离效率.在优化的实验条件下,实现了...     

高效毛细管电泳中的电渗研究

高效毛细管电泳(HPCE)是近年来发展起来的一种新型高效分离技术。它具有分离速度快、效率高、重复性好等特点,受到国内外学术界的关注。电渗是影响HPCE分离效率的重要因素,如何抑制电渗对分离效率的影响是人们研究的重要内容。本文对石英毛细管在高压电场中的电渗性能进行了多因素的研究。结果表明,综合优化实验条件可以改变电     

Bonded dimethylacrylamide as a permanent coating for capillary electrophoresis

A method for coating capillaries for capillary electrophoresis with chemically bonded polydimethylacrylamide has been developed, and the properties of the capillaries have been evaluated. The coated capillaries provided high separation efficiency, 12 x 10(5) theoretical plates/m was obtained for cytochrome c. The electroosmotic flow at pH 8.0 was 10 x 10(-10) to 6 x 10(-10) m2 V(-1) s(-1). The coated capillaries were quite stable at high pH. At least 150 runs could be done at pH 10 without appreciable performance deterioration. The excellent performance of the coated capillaries was illustrated by separation of basic proteins, acidic proteins, 9-fluorenylmethyl chloroformate-derivatized neurotransmitter amino acids, peptide reference mixtures and peptides digested from a bacteria protein.     

Comparison of the separation of large DNA fragments in the presence and absence of electroosmotic flow at high pH

This paper describes the analysis of large DNA fragments at pH > 10.0 by capillary electrophoresis (CE) in the presence of electroosmotic flow (EOF) using hydroxyethylcellulose (HEC) solution. HEC solution in the anodic reservoir enters the capillaries filled with high-pH buffer by EOF after sample injection. With respect to resolution, sensitivity, and speed, separation conducted under discontinuous conditions (different pH values of HEC solutions and buffer filling the capillary) is appropriate. Using HEC solution at concentrations higher than its entanglement threshold ensures a good separation of large DNA fragments in the presence of EOF at high pH. In addition to pH and HEC, the electrolyte species, dimethylamine, methylamine, and piperidine, play different roles in determining the resolution. The separation of DNA fragments ranging in size from 5 to 40 kilo base pairs was completed in 6 min using 1.5% HEC prepared in 20 mM methylamine-borate, pH 12.0, and the capillary filled with 40 mM dimethylamine-borate, pH 10.0. In comparison, this method allows faster separations of large DNA fragments compared with that conducted in the absence of EOF using dilute HEC solutions.     

A two‐step method for rapid characterization of electroosmotic flows in capillary electrophoresis

The measurement of electroosmotic flow (EOF) is important in a capillary electrophoresis (CE) experiment in terms of performance optimization and stability improvement. Although several methods exist, there are demanding needs to accurately characterize ultra‐low electroosmotic flow rates (EOF rates), such as in coated capillaries used in protein separations. In this work, a new method, called the two‐step method, was developed to accurately and rapidly measure EOF rates in a capillary, especially for measuring the ultra‐low EOF rates in coated capillaries. In this two‐step method, the EOF rates were calculated by measuring the migration time difference of a neutral marker in two consecutive experiments, in which a pressure driven was introduced to accelerate the migration and the DC voltage was reversed to switch the EOF direction. Uncoated capillaries were first characterized by both this two‐step method and a conventional method to confirm the validity of this new method. Then this new method was applied in the study of coated capillaries. Results show that this new method is not only fast in speed, but also better in accuracy.     

Electrophoresis of DNA in ionic liquid coated capillary

An ionic liquid (IL) coated capillary was prepared and investigated for DNA separation. The electroosmotic flow of the capillary was reversed between pH 4.5 and 9. Below 900 base pairs the larger DNA fragment suffered more retardation in the IL coated capillary due to the increasing charge density of the fragment with size. In the presence of 4% hydroxyethylcellulose, the phiX174 DNA-Hae III digest fragments were baseline separated in both IL- and polyacrylamide-coated capillary except for the fragments of 271 and 281 base pairs; while the analysis time was shorter in the IL-coated capillary. Our experiments indicated that the IL-coated capillary could work stably in the run buffer for at least 96 h with no notable deterioration in performance.     

Electroosmotic flow in a poly(dimethylsiloxane) channel does not depend on percent curing agent

Poly(dimethylsiloxane) (PDMS) microfluidic devices were prepared from different ratios of "curing agent" (which contains silicon hydride groups) to "base" (which contains vinyl-terminated noncross-linked PDMS), to determine the effect of this ratio on electroosmotic flow (EOF). In fabricating devices for this purpose, a novel method for permanently enclosing PDMS channels was developed. As a supplement to the microfluidic method, the inner walls of capillaries were coated with PDMS formed from varying ratios of curing agent to base. EOF was found to be constant for PDMS formed with each ratio, which implies that the negative surface charges do not arise from chemical species present only in the base or the curing agent.     

杯芳烃涂层毛细管分离单胺类神经递质

本文设计制作了一种对烯丙基杯 [4 ]芳烃涂层毛细管。用于毛细管电泳分离的结果表明 ,此管能分离 5 羟色胺 ( 5 HT)、多巴胺 (DA)、去甲肾上腺素 (NE)、肾上腺素 (E)等结构相近的单胺类神经递质 ,而无涂层管则不能。本涂层管在pH4～ 9范围内的电渗较无涂层管下降约 75% ,且当pH <8时 ,电渗随pH的变化接近于线性关系 ,有利于高重现分离。杯芳烃涂层毛细管不降低紫外检测灵敏度。其主要问题是酚羟基对胺类仍有吸附 (或静电 )作用     

Analysis of calcitonin and its analogues by capillary zone electrophoresis and matrix-assisted laser-desorption ionization time-of-flight mass spectrometry

Capillary zone electrophoretic (CZE) separations and mass spectrometric analysis of salmon calcitonin and related analogues were performed to generate electrophoresis and mass fingerprints for quality control of the recombinant polypeptide pharmaceutical salmon calcitonin. The calcitonins and their corresponding tryptic digests were successfully separated by CZE at low pH in fused silica capillaries dynamically modified with poly-cationic polymers. The poly-cationic modified inner surface of the fused silica capillaries generated a strong anionic electroosmotic flow (EOF). Analytes of negative, neutral, and positive charge were all swept through the capillary toward the positive electrode. Compared to Polybrene-coated capillaries, capillaries coated with PEI showed a markedly slower but much more stable electroosmotic flow. The migration order of the analytes was predicted by comparing approximate values of the charge to (molecular mass)2/3 ratios. The predicted migration order was confirmed by off-line analysis of CZE fractions with matrix-assisted laser-desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS).     

Streaming current measurements in zirconia-coated capillaries

The electroosmotic flow created in zirconia-modified capillaries has been previously investigated. In this paper, we compared the electroosmotic data set with streaming current measurements and we related all these data through zeta-potential. Streaming current measurements give an excellent indication on the direction and the value of the electroosmotic mobility of an electrolyte/capillary system for a large set of experimental conditions: 2 < pH < 12, 0 < ACN < 80 %, 10(-4) M < [SO(2- )4 ] < 4 x 10(-2) M. A good correlation between zeta-potential from streaming current measurements and zeta-potential from electroosmotic mobility measurements was observed (r2 = 0.95). However, the values obtained from streaming current were always slightly lower than the one calculated from electroosmotic mobility (slope = 0.86, sigma = 0.06). In zirconia-coated capillaries the zeta-potential can be tuned from -50 to +100 mV depending on the composition of the electrolyte.     

Preparation of capillary columns coated with linear polymer containing hydrophobic and charged groups for capillary electrochromatography

A linear polymer-coated capillary was prepared by in-capillary copolymerization of N-tert-butylacrylamide (TBAAm) with a charged monomer, 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS), after the capillary pretreatment with a bifunctional reagent. The coated capillaries were applied in capillary electrochromatographic (CEC) separation of small neutral compounds. Hydrophobic groups in the linear polymer, which were immobilized onto the capillary surface, functioned as the stationary phase in reversed-phase CEC separation, and charged groups in the linear polymer generated electroosmotic flow (EOF) along the column. The coated capillaries were prepared by a simple procedure. Moreover, the reproducibility with respect to EOF rate and migration times of the solutes was excellent. The results for CEC separation of small molecules using the linear polymer-coated capillaries are presented.     

Cycloaliphatic epoxy resin coating for capillary electrophoresis

Coating the interior surface of a fused-silica capillary with a polymeric material has long been used in capillary electrophoresis (CE) to reduce or eliminate electroosmotic flow and suppress adsorption. A cycloaliphatic epoxide-based resin was bonded to silane treated capillaries and crosslinked with a curing agent. The epoxy resin coating significantly reduced electroosmotic flow over a pH range of 3-10. This coating was sufficiently hydrophilic to suppress protein adsorption. The epoxy resin coated capillary was used to separate several acidic and basic proteins and peptides. Separation efficiencies greater than 400,000 theoretical plates were achieved. The relative standard deviations in migration times for proteins were <0.8%. Speed and simplicity are important advantages of the coating procedure compared to other published coating methods.     

超支化聚酯化学键合涂层毛细管电泳柱的制备及碱性蛋白质的分离

用一步法和准一步法合成了以三羟甲基丙烷为核的两个系列的超支化聚酯,利用红外光谱、羟值测定等手段对其分子结构进行了表征。利用超支化聚合物低粘度的特点,采用化学键合的方法将其涂于石英毛细管电泳柱内壁,使其在毛细管内壁上形成稳定的超支化聚酯涂层。该涂层在pH 3.0~7.0范围内能够有效地抑制电渗流和碱性蛋白质在毛细管壁上的吸附。实验结果表明:该涂层柱在pH 5.0的磷酸缓冲溶液中,对碱性蛋白质的分离柱效可高达塔板数106/m。每次运行之间(n=6),天与天之间(n=3),以及柱与柱之间(N=3)的迁移时间的标准偏差(RSD%)在0.5%~1.5%之间,表明本方法制得的涂层柱具有良好的稳定性。     

Surfactant-Assisted Ethane-Bridged Silica Coating for Capillary Electrochromatography

With surfactant P123 as structure directing reagent, 1, 2-bis (trimethoxysilyl) ethane was hydrolyzed under acid condition. The resulting ethane-bridged silica was coated onto the inner walls of fused silica capillaries and used as the stationary phase for capillary electrochromatography. The bridged ethyl silica provided hydrophobic groups for reversed-phase separation. A comparative coated capillary was fabricated without the use of surfactant in the preparation of the bonded silica. Separation of model neutral compounds was compared between these two kinds of capillaries. Surfactant-assisted organosilica-coated capillaries displayed much superior retention efficiency without obviously decreased electroosmotic flow. The existence of surfactant in the synthesis of the sol results in higher surface areas of the coating. Such ethane-bridged organosilica stationary phases can be used under basic conditions.     

Evaluation of new adsorbed coatings in chiral capillary electrophoresis and the partial filling technique

When using chiral selectors and the partial filling technique in capillary electrophoresis, a suitable and reproducible suppression of the electroosmotic flow is still a challenging issue, and there are a number of reasons to find alternatives to the use of covalently coated capillaries for such a particular application. In this paper, new achiral, neutral, and water-soluble polymers are evaluated as adsorbed polymers for the suppression of electroosmotic flow (EOF) when employing chiral capillary electrophoresis and the partial filling technique. Four chiral selectors, namely a cationic cyclopeptide, vancomycin, human serum albumin and riboflavin binding protein have been chosen for this study and some analytes such as derivatized amino acids, promethazine and prilocaine have been used as test compounds. Reproducibility of migration times, resolution, and selectivity as well as efficiency are reported to critically evaluate the performance of the adsorbed coatings. Results are compared to parallel data obtained with fused-silica and polyvinyl alcohol-coated capillaries.