Studies of Athabasca asphaltene Langmuir films at air-water interface

Asphaltenes are present in heavy oils and bitumen. They are a mixture of hydrocarbons having complex structures of polyaromatic rings and short side chains. In general, the high-molecular-weight asphaltene is the most aromatic fraction with the highest number of side chains and the low-molecular-weight asphaltene contains the lowest number of side chains, while the number of side chains of the whole asphaltene fraction lies in between. In this study, asphaltenes were extracted and/or fractionated from Athabasca oil sand bitumen. Subfractions of high and low molecular weight and the whole asphaltenes were characterized using a Langmuir trough and complementary techniques such as VPO, FTIR, AFM, and contact angle measurements. At an air-water interface, amphiphilic asphaltene molecules can form a monolayer. Various fractions (high, low, and whole) of the asphaltene molecules behave similarly at the air-water interface, characterized by close resemblance of their surface pressure-area, hysteresis, and relaxation isotherms. The high-molecular-weight asphaltene is the most expanded fraction, while the low-molecular-weight asphaltene fraction is the most condensed, with the whole asphaltene lying in between. At the air-water interface a monolayer of the low-molecular-weight asphaltene relaxes at a faster rate than one of the high-molecular-weight asphaltene.     

Synthesis and optical properties of tetraphenylmethane-based tetrahedral fluorescent compounds and their water-soluble PEG-linked polymers

The synthesis and optical properties of tetrahedral fluorescent compounds comprising of tetraphenylmethane as the core and oligothiophenes as the chromophoric arms, and their water-soluble poly(ethylene glycol)-linked polymers are reported.     

Structural characterization and properties of an azopolymer arranged in Langmuir and Langmuir-Blodgett films

The fabrication of Langmuir and Langmuir-Blodgett (LB) films of an acid-azopolymer (PAzCOOH) is reported. Several techniques were used in their characterization: surface pressure (pi) and surface potential (DeltaV) isotherms, UV-vis reflection spectroscopy, and Brewster angle microscopy (BAM) for the Langmuir films and contact angle measurements, UV-vis, fluorescence, IR and Raman spectroscopy and scanning electronic microscopy (SEM) for the LB films. Our study reveals that lateral chains of the polymer situate preferentially onto the water surface with the acid group in contact with the water, where aggregates are scarcely formed. Therefore, the lateral chains of PAzCOOH can be treated as individual monomers to determine structural properties of the fabricated Langmuir and LB films. Monomeric treatment has been used to interpret UV-vis reflection spectroscopy, and a monomer model has been performed to represent lateral chains using density functional theory at B3LYP 6-31G(d,p) level of theory to assign the observed vibrational spectra.     

Water-soluble fluorescent boronic acid compounds for saccharide sensing: substituent effects on their fluorescence properties

Four new naphthalene-based boronic acid compounds (1-4) were synthesized. The effect of various carbohydrates on their fluorescence properties has been studied in aqueous phosphate buffer at pH 7.4. Different substitutions on the aniline group of the naphthalene ring resulted in significant differences in fluorescence properties for these four compounds. Compound 1 shows ratiometric fluorescence changes upon addition of a sugar. Compounds 2 and 3 do not show ratiometric fluorescence changes but show very large fluorescence intensity changes (about 70-fold fluorescence intensity increase). In addition to the quantifiable fluorescence property changes upon sugar addition, the fluorescence color changes of 1-3 are also visible to the naked eye. However, amidation of the aniline nitrogen atom significantly diminishes the fluorescence intensity of compound 4. The crystal structure of one boronic acid provided some insight into the structural features that are important for the fluorescence properties of these compounds.     

Nonequilibrium phases of nanoparticle Langmuir films

We report on an in-situ observation of the colloidal silver nanoparticle self-assembly into a close-packed monolayer at the air/water interface followed by a 2D to 3D transition. Using the fast tracking GISAXS technique, we were able to observe the immediate response to the compression of the self-assembled nanoparticle layer at the air/water interface and to identify all relevant intermediate stages including those far from the equilibrium. In particular, a new nonequilibrium phase before the monolayer collapse via the 2D to 3D transition was found that is inaccessible by the competing direct space imaging techniques such as the scanning and transmission electron microscopies due to the high water vapor pressure and surface tension.     

含双1,3,4-噁二唑类荧光化合物的合成及荧光性能

在丙基磷酸酐催化条件下,由对甲基苯甲酸和取代苯甲酰肼通过环合反应得到含甲基的1,3,4-噁二唑单环,经高锰酸钾氧化反应得到单环1,3,4-噁二唑芳香酸;然后再次利用丙基磷酸酐的催化效应,实现芳香酸与邻羟基苯甲酰肼的环合反应,制备得到含双1,3,4-噁二唑结构的荧光化合物.利用红外光谱仪和核磁共振谱仪表征了合成产物的结构,并测定了产物的元素组成和荧光性能.结果表明,各合成产物的总收率为44%～49%;目标化合物具有较大的Stokes位移.     

Synthesis and fluorescent properties of model compounds for conjugated polymer containing maleimide units at the main chain

2,3‐Diaryl substituted maleimides as model compounds of conjugated maleimide polymers [poly(RMI‐alt‐Ar) and poly(RMI‐co‐Ar)] were synthesized from 2,3‐dibromo‐N‐substituted maleimide (DBrRMI) [R= cyclohexyl (DBrCHMI) and n‐hexyl (DBrHMI)] and aryl boronic acid using palladium catalysts. To clarify structures of conjugated polymer containing maleimide units at the main chain, ¹³C NMR spectra of 2‐aryl or 2,3‐diaryl substituted maleimides were compared with those of N‐substituted maleimide polymers. Copolymers obtained with DBrRMI via Suzuki‐Miyaura cross‐coupling polymerizations or Yamamoto coupling polymerizations were dehalogenated structures at the terminal end. This dehalogenation may contribute to the low polymerizability of DBrRMIs. On the other hand, the π‐conjugated compounds showed high solubility in common organic solvents. The N‐substituents of maleimide cannot significantly affect the photoluminescence spectra of 2,3‐diaryl substituted maleimides derivatives. The fluorescence spectra of poly(RMI‐alt‐Ar) and poly(RMI‐co‐Ar) varied with N‐substituents of the maleimide ring. When exposed to ultraviolet light of wavelength 352 nm, a series of 1,4‐phenylene‐ and/or 2,5‐thienylene‐based copolymers containing N‐substituted maleimide derivatives fluoresced in a yellow to blue color. It was found that photoluminescence emissions and electronic state of π‐conjugated maleimide derivatives were controlled by aryl‐ and N‐substituents, and maleimide sequences of copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Langmuir and langmuir-blodgett films of metallosupramolecular polyelectrolyte-amphiphile complexes

A detailed analysis of a metallosupramolecular polyelectrolyte-amphiphile complex (PAC) at the air-water interface is presented. Langmuir isotherms, Brewster angle microscopy, and X-ray reflectance and diffraction methods are employed to investigate the structure of the Langmuir monolayers. The PAC is self-assembled from 1,3-bis[4'-oxa-(2,2':6',2' '-terpyridinyl)]propane, iron acetate, and dihexadecyl phosphate (DHP). Spreading the PAC at the air-water interface results in a monolayer that consists of two strata. DHP forms a monolayer at the top of the interface, while the metallosupramolecular polyelectrolyte is immersed in the aqueous subphase. Both strata are coupled to each other through electrostatic interactions. The monolayers can be transferred onto solid substrates, resulting in well-ordered multilayers. Such multilayers are model systems for well-ordered metal ions in two dimensions.     

Langmuir and Langmuir-Blodgett films of amphiphilic bistable rotaxanes

A series of amphiphilic bistable [2]rotaxanes--in which a ring-shaped component, the tetracationic cyclophane, cyclobis(paraquat-p-phenylene), has been assembled around two recognition sites, a tetrathia-fulvalene (TTF) unit and a 1,5-dioxynaphthalene (DNP) ring system, situated apart at different strategic locations within the central polyether section of an amphiphilic dumbbell component that is terminated by a hydrophobic tetraarylmethane-based stopper (near the TTF unit) at one end and by a hydrophilic tetraarylmethane-based stopper (near the DNP ring system) at the other end--has been designed and synthesized. The effects of systematic changes in the constitutions of the three ethylene glycol tails (diethylene or tetraethylene glycol) and end groups (hydroxyl or methoxyl functions) attached to the hydrophilic stoppers on Langmuir film balance and surface rheology experiments at 20 degreesC were examined to determine the monolayer stabilities and co-conformations of the [2] rotaxanes and their free dumbbell counterparts. These experiments allow us to propose a model for the rotaxane's structures at different surface pressures. All the [2]rotaxanes form stable Langmuir films. These films typically pass from a liquid-expanded region to a liquid-condensed region. The transition between the two regions was either directly observed or ascertained using film stability experiments. Film balance and surface rheology experiments showed that the addition of the tetracationic cyclophane component and hydroxyl end groups markedly increased the stabilities and viscoelasticity of the films.     

Structure and dynamic properties of colloidal asphaltene aggregates

The abundant literature involving asphaltene often contrasts dynamic measurements of asphaltene solutions, highlighting the presence of small particle sizes between 1 and 3 nm, with static scattering measurements, revealing larger aggregates with a radius of gyration around 7 nm. This work demonstrates the complementary use of the two techniques: a homemade dynamic light scattering setup adapted to dark and fluorescent solutions, and small-angle X-ray and neutron scattering. Asphaltene solutions in toluene are prepared by a centrifugation separation to investigate asphaltene polydispersity. These experiments demonstrate that asphaltene solutions are made of Brownian colloidal aggregates. The hydrodynamic radii of asphaltene aggregates are between 5 and 10 nm, while their radii of gyration are roughly comparable, between 3.7 and 7.7 nm. A small fraction of asphaltenes with hydrodynamic and gyration radii around 40 nm is found in the pellet of the centrifugation tube. The fractal character of the largest clusters is observed from small angle scattering nearly on a decade length scale. Previous results on aggregation mechanisms are confirmed ( Eyssautier, J., et al. J. Phys. Chem. B 2011 , 115 , 6827 ): nanoaggregates of 3 nm radius, and with hydrodynamic properties also frequently illustrated in the literature, aggregate to form fractal clusters with a dispersity of aggregation number.     

Spectroscopic study of J aggregates of amphiphilic merocyanine dyes formed in their pure Langmuir films

It is known that an amphiphilic merocyanine dye, 3-carboxymethyl-5-[2-(3-octadecyl-2(3H)- benzothiazolylidene)ethylidene]-2-thioxo-4-thiazolidinone (DS) and its derivatives DSe and 6MeDS form J aggregates under the presence of metallic cations, although the dyes' static dipole moments must be favorable for H aggregates. A metal-free J aggregate of 6MeDS has been generated in its pure Langmuir films and transferred onto CaF2 substrates to investigate the molecular environment around the carboxylic group born by the dye. Combining visible and infrared spectroscopy, geometrical consideration based on ab initio calculations, and simulation of the excitation energy, a structural model of this J aggregate has been proposed. With this model, formation of intermolecular carboxyl-keto hydrogen bonds, which can compensate the electrostatic disadvantage of the J aggregate under the presence of water, has been suggested. As for another derivative of DS, DO, similar discussion has been made for its Mg2+ -containing J aggregate, which is found in this work. In addition, the proposed structural model can tell the cause of the difference in the tendency to J aggregate among 6MeDS, DSe, DS, and DO.     

Langmuir monolayer and Langmuir–Blodgett films of amphiphilic triblock copolymers with water-soluble middle block

Langmuir monolayers and Langmuir–Blodgett (LB) film morphology of amphiphilic triblock copolymers are studied using surface pressure-area measurements and atomic force microscopy (AFM), respectively. The triblock copolymers are composed of long water-soluble poly(ethylene oxide) (PEO) chains as middle block with very short poly(perfluorohexylethyl methacrylate) (PFMA) end blocks. The surface pressure-area isotherms show phase transitions in the brush regime. This phase transition is due to a rearrangement of PFMA block at the air–water interface. It becomes more significant with increasing PFMA content in the copolymer. LB films transferred at low surface pressures from the air–water interface to hydrophilic silicon substrates show surface micelles in the size range of 50–100 nm. A typical crystalline morphology of the corresponding PEO homopolymer is observed in LB films of copolymers with very short PFMA blocks, transferred in the brush region at high surface pressure. This crystallization is hindered with increasing PFMA content in the copolymer.     

煤液化沥青分析表征及结构模型

对从煤液化残渣中萃取出的沥青类物质进行了固体13C-CP/MAS NMR分析、元素分析、红外光谱分析(FT-IR)和光电子能谱(XPS)分析,得到煤液化沥青的芳香结构单元信息及相关结构参数信息。结果表明,煤液化沥青芳香桥碳与周碳之比为0.115,芳香碳原子的存在形式以苯结构为主;脂肪结构多以甲基和环状亚甲基形式存在;氧主要以羰基、酯基的形式存在;氮主要以吡咯的形式存在。利用结构参数和分析表征结果构建了煤液化沥青的大分子结构模型,并运用13C-NMR预测软件ACD/CNMR Predictor计算了煤精制沥青大分子结构模型的13C化学位移。根据计算结果对大分子结构模型进行了修正,获得了与实验谱图吻合较好的大分子结构模型。     

Structure and properties of nanostructured films based on refractory compounds

The results of studies of the structure and physicochemical properties of nanostructured films based on refractory carbides, borides, and nitrides are generalized. The possibility to obtain diamond-level hardness values is considered. The thermal stability of the hardness and the nanostructure of the films is discussed. The phase diagrams of refractory compounds in the nanocrystalline state are considered. The results of high-temperature oxidation of nanocrystal-line and amorphous films are described.     

沥青质分散剂对沥青质的稳定及缔合的影响

采用紫外－可见光谱法研究了沥青质分散剂对甲苯－正庚烷－沥青质体系中沥青质的稳定作用,通过黏度法考察了沥青质分散剂对沥青质溶液中胶束缔合度的影响。结果表明,十二醇（DAL）、十二烷基苯磺酸（DBSA）、十二烷基苯酚（DP）对沥青质都有一定的稳定作用。三种沥青质分散剂的稳定作用顺序为DBSA>DP>DAL。DAL、DP及DBSA浓度较低时（1%）对沥青质甲苯溶液黏度的影响规律相似,推迟了黏度迅速增加的拐点,即可以抑制沥青质胶束的缔合。DBSA浓度较大时,沥青质胶束没有明显的聚并,同时使得沥青质溶液的相对黏度增加明显。三种沥青质分散剂都能显著降低胶束的聚集数;三种沥青质分散剂抑制沥青质胶团聚并强弱顺序为：DBSA>DP>DAL。这与其头部官能团的酸性顺序一致。     

噻唑橙核酸荧光探针的合成及光谱性质研究

本文合成了一类可用于核酸分子检测的噻唑橙类(thiazole orange,TO)菁染料4a、4b和5,并对染料结构进行了表征。其中染料4a未见文献报道。三种染料在Tris-HCl(pH=7.0)缓冲溶液中的最大吸收光谱值分别在504nm、502nm、507nm处。荧光发射光谱表明:染料在Tris-HCl(pH=7.0)缓冲溶液中无荧光,加入ds-DNA后荧光显著增强,荧光增强与加入ds-DNA的量之间呈现良好的线性关系。改变染料取代基后得到的染料4a对ds-DNA表现出更优异的荧光增强性能。     

Photoreactions and lateral patterning in Langmuir and Langmuir-Blodgett films

Reversible morphological changes occur with photoisomerization of azobenzene in Langmuir-Blodgett (LB) films complexed with polycations, which contradicts an implicit assumption of the concept of free volume that two-dimensional film structures are preserved during the photoisomerization. J-aggregates of chromophores are formed by two processes. The first process is "light-induced J-aggregation" in which photoisomerized molecules form J-aggregates. The other process is "triggered J-aggregation," in which photoisomerization of one of the components triggers J-aggregation of another chemical species in the mixed films. Both processes of J-aggregation are in many cases accompanied by large morphological changes of the films. However, LB films fabricated using processes under isobaric conditions do not change their morphology during light-induced J-aggregation and are patterned with J-aggregates using ultraviolet illumination through a photomask. Phase separation in mixed LB films gives rise to two-dimensional patterns, which are used to fabricate templates by using an amphiphilic silane-coupling agent as one of the components in the mixed LB films. Nanopatterns are also fabricated.     

Synthesis,photochromic and fluorescent properties of hybrid compounds of fulgimides and benzothiazolylthienothiophene

The precursors and hybrid compounds, including photochromic fulgimides and fluorescent benzothiazolylthienothiophene units, have been synthesized. Spectroscopic investigations by absorption and fluorescence methods showed that fulgimide hybrids display photochromism, but do not display fluorescence properties. A possible explanation for this fact is proposed and also the decreased effectiveness of photochromic conversion.     

Kagome network compounds and their novel magnetic properties

Compounds possessing the Kagome network are truly interesting because of their unusual low-energy properties. They exhibit magnetic frustration because of the triangular lattice inherent to the hexagonal bronze structure they possess, as indeed demonstrated by some of the Fe(3+) jarosites, but this is not the general case. Kagome compounds formed by transition metal ions with varying spins exhibit novel magnetic properties, some even showing evidence for magnetic order and absence of frustration. We describe the structure and magnetic properties of this interesting class of materials and attempt to provide an explanation for the variety of properties on the basis of theoretical considerations.     

Effect of metal cations on polydiacetylene Langmuir films

Polydiacetylene (PDA) Langmuir films (LFs) are a unique class of materials that couple a highly aligned conjugated backbone with tailorable pendant side groups and terminal functionalities. The films exhibit chromatic transitions from monomer to blue polymer and finally to a red phase that can be activated optically, thermally, chemically, and mechanically. The properties of PDA LFs are strongly affected by the presence of metal cations in the aqueous subphase of the film due to their interaction with the carboxylic head groups of the polymer. In the present study the influence of divalent cadmium, barium, copper, and lead cations on the structural, morphological, and optical properties of PDA LFs was investigated by means of surface pressure-molecular area (π-A) isotherms, atomic force microscopy, optical absorbance, and Raman spectroscopy. The threshold concentrations for the influence of metal cations on the film structure, stability, and phase transformation were determined by π-A analyses. It was found that each of the investigated cations has a unique influence on the properties of PDA LFs. Cadmium cations induce moderate phase transition kinetics with reduced domain size and fragmented morphology. Barium cations contribute to stabilization of the PDA blue phase and enhanced linear strand morphology. On the other hand, copper cations enhance rapid formation of the PDA red phase and cause fragmented morphology of the film, while the presence of lead cations results in severe perturbation of the film with only a small area of the film able to be effectively polymerized. The influence of the metal cations is correlated with the solubility product (K(sp)), association strength, and ionic-covalent bond nature between the metal cations and the PDA carboxylic head groups.