简化的溶胶凝胶法合成LiMn2-xLaxO4及电性能研究

采用以水溶液作为反应介质的简化的溶胶凝胶法制备了LiMn2O4和稀土La掺杂的LiMn1.98La0.02O4粉体材料, 此方法工艺简单, 容易控制, 制备周期短. 利用XRD, SEM对材料粉体进行结构形态表征, 并以合成的材料为正极活性材料测试其充放电性能、循环伏安性能、 电化学阻抗谱性能. 实验结果表明: 材料LiMn2O4和LiMn1.98La0.02O4具有较好的尖晶石结构, 且颗粒分布均匀, 掺杂La的材料循环性能有较大改善. 以LiMn2O4为正极活性物质的扣式电池首次放电比容量129.38 mAh · g-1, 循环20次后容量保持在94%, 以LiMn1.98La0.02O4为正极活性物质的扣式电池首次放电比容量106.77 mAh · g-1, 循环20此后容量保持在96.2%.     

二价与四价金属离子等摩尔共掺杂的锂离子电池正极材料LiMn_(1.9)Mg_(0.05)Ti_(0.05)O_4的制备与表征

以氢氧化锂、乙酸锰、硝酸镁和钛酸丁酯为原料,以柠檬酸为螯合剂,采用溶胶-凝胶法制备了二价镁离子与四价钛离子等摩尔共掺杂的尖晶石型锂离子电池正极材料Li Mn1.9Mg0.05Ti0.05O4.采用热重分析(TGA),X射线衍射(XRD),扫描电子显微镜(SEM),透射电子显微镜(TEM)和电化学性能测试(包括循环伏安(CV)和电化学交流阻抗谱(EIS)测试)对所得样品的结构、形貌及电化学性能进行了表征.结果表明:780°C下煅烧12 h得到了颗粒均匀细小的尖晶石型结构的Li Mn1.9Mg0.05Ti0.05O4材料,该材料具有良好的电化学性能,在室温下以0.5C倍率充放电,在4.35-3.30 V电位范围内放电比容量达到126.8 m Ah·g-1,循环50次后放电比容量仍为118.5m Ah·g-1,容量保持率为93.5%.在55°C高温下循环30次后的放电比容量为111.9 m Ah·g-1,容量保持率达到91.9%,远远高于未掺杂的Li Mn2O4的容量保存率.二价镁离子与四价钛离子等摩尔共掺杂Li Mn2O4,改善了尖晶石锰酸锂的电子导电和离子导电性能,使其倍率性能和高温性能都得到了明显的提高.     

尖晶石型LiMn2-xInxO4(x=0，0.01，0.02，0.05)的合成及电化学性能研究

以醋酸锰、氢氧化锂和三氧化二铟为原料,以柠檬酸为配位剂,采用溶胶-凝胶法制备了掺杂In的尖晶石LiMn2-xInxO4(x=0,0.01,0.02,0.05),采用XRD、SEM对目标材料进行了结构和形貌表征,采用恒流充放电、循环伏安(CV)以及交流阻抗(EIS)谱测试对材料进行了电化学性能表征,考察了不同In掺杂量对材料性能的影响。结果表明,当In掺杂量为1%时,LiMn1.99In0.01O4样品具有纯的尖晶石锰酸锂结构,在0.5C和3.4～4.35 V电压范围条件下,LiMn1.99In0.01O4的初始放电容量为119.9 mAh.g-1,经过1C 30次,2C 30次,再0.5C 5次循环后,其放电容量保持率为84.9%,显示了良好的电化学性能。掺杂1%的In的样品比未掺杂的样品具有更优的高温循环稳定性能。     

N掺杂C包覆Li_4Ti_5O_(12)锂离子电池负极材料的制备与性能

以TiO2和Li2CO3分别作为钛源和锂源,聚苯胺(PANI)作为碳源和氮源,通过球磨辅助高温固相法合成N掺杂C包覆Li4Ti5O12.通过X射线衍射仪(XRD)、X射线光电子能谱仪(XPS)、元素分析仪(EA)、扫描电子显微镜(SEM)及透射电子显微镜(TEM)等对材料的结构和形貌进行了表征,并将合成材料制成电极片组装成扣式电池,测试其电化学性能.结果显示,钛源的处理对样品的性能有影响,通过对TiO2预包覆合成的N掺杂C包覆Li4Ti5O12具有优异的电化学性能,在碳、氮源的包覆比例(PANI与Li4Ti5O12的质量比)为5%时效果最佳:1C放电时其比容量为157.6mA·h/g,20C放电时其比容量仍可达到119.6mA·h/g;在10C充放电循环100次后,其比容量保持率为97.8%,表明N掺杂C包覆Li4Ti5O12具有优异的倍率性能和循环稳定性.     

正极材料LiCuxMn2-xO4-xBrx的合成及电化学性能

通过溶胶凝胶法制备了锂锰氧化物LiCuxMn2-xO4-xBrx正极材料,采用XRD、SEM等方法对其进行了表征,并测试了样品的电化学性能．结果表明：合成的LiCuxMn2-xO4-xBrx样品为尖晶石结构,粒径均匀．随着掺杂量的增加,晶胞参数减小;一定量的Cu^2＋和Br^-复合改性增加了尖晶石结构的稳定性,改善了材料的循环性能．实验发现当掺杂量为x=0．03时循环性能最好,初始比容量为97．5mAh／g,50次循环后比容量为82．1mAh／g．     

Li3V2(PO4)3/C和Li2.5Na0.5V2(PO4)3/C的结构和电化学性能的比较研究

采用溶胶-凝胶法合成了锂离子正极材料Li3V2(PO4)3/C(LVP/C)及Li2.5Na0.5V2(PO4)3/C,并用XRD、循环伏安及交流阻抗等方法,研究了大量Na+掺杂对材料结构和电化学性能影响。结果表明,大量钠离子的掺杂会使LVP结构由单斜向菱方转变。掺杂化合物Li2.5Na0.5V2(PO4)3/C在0.5 C充电1 C放电时,首次放电容量为118 mAh.g-1,50次循环后容量保持率为92.4%,并发现与单斜LVP存在多个放电平台不同,Li2.5Na0.5V2(PO4)3/C仅在3.7 V处有一个放电平台。     

锂离子电池正极材料Li_(1.2)Mn_(0.54-x)Ni_(0.13)Co_(0.13)Zr_xO_2的制备及电化学性能

为了改善富锂锰基正极材料Li1.2Mn0.54Ni0.13Co0.13O2的循环性能,采用燃烧法合成了正极材料Li1.2Mn0.54-xNi0.13Co0.13ZrxO2(x=0.00,0.01,0.02,0.03,0.06).通过X射线衍射(XRD)和扫描电镜(SEM)对其结构与形貌进行了表征,利用恒电流充放电测试,循环伏安(CV)及电化学交流阻抗谱(EIS)技术对其电化学性能进行测试.结果表明,Li1.2Mn0.54-xNi0.13Co0.13ZrxO2(x=0.00,0.01,0.02,0.03,0.06)正极材料均具有α-NaFeO2型层状结构;在室温,2.0-4.8 V电压范围,以0.1C和1.0C(充放电电流以1.0C=180 mA·g-1计算)倍率充放电进行测试,样品Li1.2Mn0.52Ni0.13Co0.13Zr0.02O2的首次放电比容量分别为280.3和206.4 mAh·g-1.其中,在1.0C倍率下,100次循环后容量保持率由原来的73.2%提高到88.9%;以5.0C倍率充放电进行测试,经50次循环后,掺杂正极材料的放电比容量为76.5 mAh·g-1,而未掺杂材料仅有15.0 mAh·g-1.在50、25和-10°C,2.0C倍率条件下,掺杂正极材料的电化学性能均得到有效改善,其中,在-10°C经过50次循环后正极材料Li1.2Mn0.52Ni0.13Co0.13Zr0.02O2比未掺杂的正极材料相比,其放电比容量提高了61.1%.     

单斜层状结构锂离子电池正极材料LiY_xMn_(1-x)O_2的合成及其电化学性能

以Na2CO3、(CH3CO2)2Mn.4H2O、Y2O3和CH3COOLi.2H2O为原料,采用高温固相法经过2次灼烧和水热离子交换法得到一系列钇掺杂的LiMn1-xYxO2(x:0.01,0.02,0.03,0.05)化合物。通过XRD、XPS、循环伏安及恒电流充放电测试技术,研究了钇掺杂离子对合成正极材料结构及电化学性能的影响。结果表明,所得产物均具有单斜层状结构。合适的钇掺杂可以起到扩展锂离子脱嵌通道和稳定骨架结构的作用,钇离子的引入部分取代原有的三价锰离子,由于钇离子的离子半径较三价锰离子大,因此稀土掺杂锰酸锂材料的晶胞参数比未掺杂材料大,在一定程度上扩充了锂离子迁移的三维通道,更有利于锂离子的嵌入与脱嵌,提高单斜层状LiMnO2材料的电化学循环可逆性及循环稳定性。通过对所得化合物进行了钇掺杂量及电化学性能的研究,得到性能比较优良的LiY0.021Mn0.979O2化合物,其首次放电比容量为125.7mA.h/g,100次循环以后,放电比容量达212.1mA.h/g,远高于未掺杂材料的放电容量138mA.h/g。交流阻抗测试结果表明,Y3+的掺入能降低材料的电化学反应阻抗和提高材料中Li+的扩散能力。     

EDTA辅助合成Li_2MnSiO_4/C纳米复合锂离子电池正极材料及性能

以乙二胺四乙酸(EDTA)为配位剂,采用溶胶凝胶和溶剂热法相结合的方法合成了Li2MnSiO4/C纳米复合正极材料。经过EDTA配位的锂锰硅前驱体在氩气中经过700℃煅烧后,产生为颗粒尺寸约为50 nm的Li2MnSiO4/C纳米复合粉体。在0.1C=33mA·g-1进行充放电测试时,其首次充电和放电比容量分别为223和140 mAh·g-1,第5次循环放电比容量仍为138 mAh·g-1;电流密度升至0.2C=66 mA·g-1时,在第20次循环的放电比容量仍可稳定在80 mAh·g-1左右。这些结果表明,EDTA的配位作用可抑制杂相的形成,这种分散性相对较好的纳米复合粉体Li2MnSiO4正极材料表现出提高的循环稳定性。     

Y3+对LiMn2O4的结构和电化学性能的影响

以Li2CO3、电解MnO2和Y2O3为原料,采用固相法合成了Li1.02YxMn2-xO4(x=0,0.005,0.01,0.02,0.04,0.1)。XRD测试表明,不同Y3 掺杂量的Li1.02YxMn2-xO4晶型发育良好。Y3 的加入使Li1.02YxMn2-xO4晶格常数和晶胞体积变小。循环伏安测试结果表明,少量Y3 的加入没有改变锂离子脱嵌过程,但随着掺杂量的增加,锂离子脱嵌过程趋于容易,能有效地避免能级分裂。电化学性能测试表明,当掺杂量x=0.02时,初始容量为117.2mAh.g-1,20次循环容量衰减至113.6mAh.g-1,容量保持率为96.90%;Y3 的加入很好地起到了稳定晶体结构,有效抑制Jahn-Teller效应的作用。交流阻抗测试结果表明,Y3 的加入能改善材料的导电性能。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.